HP P2000 HP P2000 G3 MSA System SMU Reference Guide - Page 105
Drive enclosure: I/O module properties, I/O module: In port properties
View all HP P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Drive enclosure: I/O module properties When you select an I/O module, a table shows: • Health. OK. The I/O module is operating normally. Degraded. The I/O module's operation is degraded. Fault. The I/O module has failed. N/A. Health is not available. • Health Reason. • Status. • Controller ID. I/O module: In port properties When you select an In port, a table shows: • Health. OK. The port is operating normally. Degraded. The port's operation is degraded. Fault. The port has failed. N/A. Health is not available. • Health Reason. • Status. • Name. I/O module: Out port properties When you select an Out port, a table shows: • Health. OK. The port is operating normally. Degraded. The port's operation is degraded. Fault. The port has failed. N/A. Health is not available. • Health Reason. • Status. • Name. Viewing information about a remote system In the Configuration View panel, right-click a remote system and select View > Overview. The System Information table shows: • The username and network-port IP addresses that are configured on the local system to access the remote system. The configured password is not shown. • Information such as the system name, location, and status that is read from the remote system. To sign in to the remote system, click one of its IP address links. HP P2000 G3 MSA System SMU Reference Guide 105