HP P2000 HP P2000 G3 MSA Systems Installation Instructions

HP P2000 Manual

Get HP P2000 PDF manuals and user guides View all HP P2000 manuals
Add to My Manuals
Save this manual to your list of manuals

HP P2000 manual content summary:

  • HP P2000 | HP P2000 G3 MSA Systems Installation Instructions - Page 1
    /support/manuals. This document contains installation and configuration information for HP P2000 G3 MSA Systems containing the following controllers: • HP P2000 G3 Fibre Channel MSA Controller • HP P2000 G3 Combo FC/iSCSI MSA Controller • HP P2000 G3 SAS MSA Controller • HP P2000 G3 10GbE iSCSI MSA
  • HP P2000 | HP P2000 G3 MSA Systems Installation Instructions - Page 2
    cable/controller configurations, see the HP P2000 G3 MSA System Cable Configuration Guide which can be downloaded at nl http://www.hp.com/support/manuals. As appropriate to your environment: • Connect drive enclosures to the P2000 G3 MSA System • Connect the P2000 G3 MSA System to data hosts
  • HP P2000 | HP P2000 G3 MSA Systems Installation Instructions - Page 3
    the following when cabling HP P2000 G3 MSA Systems: • P2000 G3 FC/iSCSI MSA System LUNs may be presented through either the iSCSI or FC host ports; presenting the same LUN through both protocols is not supported. • P2000 G3 MSA System Fibre Channel and iSCSI controller ports can both be used
  • HP P2000 | HP P2000 G3 MSA Systems Installation Instructions - Page 4
    show generic representations of servers and switches. P2000 G3 FC MSA connected to two switches/two servers Connecting a P2000 G3 FC MSA dual-controller array enclosure to two switches/two servers in a dual-path configuration requires eight (8) Fibre Channel cables. P2000 G3 iSCSI MSA connected
  • HP P2000 | HP P2000 G3 MSA Systems Installation Instructions - Page 5
    a P2000 G3 Combo FC/iSCSI MSA dual-controller array enclosure to four switches/four servers in a dual-path configuration requires eight (8) Fibre Channel cables and eight (8) Ethernet cables. P2000 G3 10GbE iSCSI MSA System connected to two switches/two servers Connecting a P2000 G3 10GbE iSCSI MSA
  • HP P2000 | HP P2000 G3 MSA Systems Installation Instructions - Page 6
    that the controller modules, drive modules, and disk drives are running the latest available firmware. Using the Storage Management Utility (SMU), right-click the system in the Configuration View panel and select Tools > Update Firmware. This panel shows the currently installed firmware versions and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
HP P2000 G3 MSA Systems
Installation Instructions
© Copyright 2009, 2011 Hewlett-Packard Development Company, L.P.
Printed in Puerto Rico
*590335-007*
Part number: 590335-007
May 2011
edition: 7
About this document
This document is for the person who installs, administers,
and troubleshoots servers and storage systems. HP assumes
that you are qualified in servicing and installing computer
equipment, and are trained in recognizing hazards in
products and hazardous energy levels. For complete
information on installing and configuring your product,
please see the user guide provided with your HP P2000
G3 MSA System. User documents are provided on the
Software Support/Documentation CD shipped with the
product. For the latest version of a document, see the HP
Manuals website: h
t
tp://w
w
w
.hp
.co
m/su
ppo
r
t/man
uals
.
This document contains installation and configuration
information for HP P2000 G3 MSA Systems containing
the following controllers:
•
HP P2000 G3 Fibre Channel MSA Controller
•
HP P2000 G3 Combo FC/iSCSI MSA Controller
•
HP P2000 G3 SAS MSA Controller
•
HP P2000 G3 10GbE iSCSI MSA Controller
•
HP P2000 G3 iSCSI MSA Controller
Installing an HP P2000 G3 MSA System includes:
“Step 1. Install equipment in the rack” (page 1)
“Step 2. Install hardware options” (page 1)
“Step 3. Connect cables” (page 2)
“Step 4. Power on the components” (page 6)
“Step 5. Update firmware” (page 6)
“Step 6. Configure the MSA” (page 6)
Step 1. Install equipment in the rack
Use the racking instructions provided with the P2000 G3
MSA System and other hardware (including servers,
switches, and drive enclosures) to install components in
the rack.
Site requirements
For information about detailed site requirements see the
racking instructions poster and user guide.
Rack planning
For information about setting up the rack, including the
appropriate warnings and cautions, see the documentation
that came with your rack. Updated rack information can
be downloaded at: h
t
tp://w
w
w
.hp
.co
m/pr
odu
c
ts/r
ac
ks
.
Step 2. Install hardware options
For information about installing controllers, disk drives,
and other options, see the installation instructions provided
with the option or on the Software Support/Documentation
CD.
IMPORTANT:
Do not install different types of
controllers in the same enclosure chassis (for
example, a P2000 G3 Fibre Channel MSA
Controller and a P2000 G3 Combo FC/iSCSI MSA
Controller). This is not supported.
The following illustrations describe different P2000 G3
MSA controller models.
P2000 G3 Fibre Channel MSA System
2. Fibre Channel host ports
1. Power supplies
4. Reserved for future use
3. CLI port (mini-USB)
6. SAS expansion port
5. Management Ethernet port
P2000 G3 Combo Fibre Channel/iSCSI MSA System
2. Fibre Channel host ports
1. Power supplies
4. CLI port (mini-USB)
3. iSCSI ports (host or replication)
6. Management Ethernet port
5. Reserved for future use
7. SAS expansion port
P2000 G3 SAS MSA System
2. CLI port (mini-USB)
1. Power supplies
4. Management Ethernet port
3. Reserved for future use
6. SAS host ports
5. SAS expansion port
P2000 G3 10GbE iSCSI MSA System
2. 10GbE SFP+ iSCSI host ports
1. Power supplies
4. Reserved for future use
3. CLI port (mini-USB)
6. SAS expansion port
5. Management Ethernet port
P2000 G3 iSCSI MSA System
2. iSCSI host ports
1. Power supplies
4. Reserved for future use
3. CLI port (mini-USB)
6. SAS expansion port
5. Management Ethernet port
Page 1