HP P22vb Quick Setup Guide

HP P22vb Manual

HP P22vb manual content summary:

  • HP P22vb | Quick Setup Guide - Page 1
    products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: January 2021 www.hp.com/support Go to www.hp.com/support to locate your user guide, i drivers
  • HP P22vb | Quick Setup Guide - Page 2
    18.5-inch TFT Color LCD Specifications LCD Panel Viewable Image Size: 470 mm diagonal Pixel pitch: 0.3 mm (H) × 0.3 mm (V) Input Video: R, G, B Analog Interface Separate Sync.: HNTTL H-Frequency: 30 to 47 KHz V-Frequency: 50 to 70 Hz Display Colors 16.7 M Colors Active Area 409.8 mm (H) ×
  • 1
  • 2

3
Connect the VGA or HDMI cable
1. Be sure both the monitor and computer are switched off.
2. Connect one end of the cable to the back of the monitor and the
other end to the computer port.
VGA
18.5 inch Monitor
HDMI
21.5 inch Monitor
4
Connect the power adapter
1
2
5
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is
very important.
1
2
6
Adjust screen position
To optimize the viewing position, you can adjust the monitor tilt
by using both of your hands to hold the edges of the monitor as
shown below. The monitor can be adjusted to 15 degrees up or
-5 degrees down.
-5°
15°
Do not touch the LCD screen
when you change the angle.
It may cause damage or
break the LCD screen.
i
www.hp.com/support
Go to
www.hp.com/support
to locate your user guide,
drivers, and software.
Quick Setup
Optimum Resolution:
21.5 inch monitor:
1920 × 1080 @ 60 Hz
18.5 inch monitor:
1366 × 768 @ 60 Hz
1
Unpack the box
21.5 in LCD Monitor
Quick Start Guide
Quick Setup
Optimum Resolution:
21.5 inch monitor: 1920 × 1080 @ 60 Hz
18.5 inch monitor: 1366 × 768 @ 60 Hz
1
HDMI Cable
Power Adapter
18.5 in LCD Monitor
Quick Start Guide
Quick Setup
Optimum Resolution:
21.5 inch monitor: 1920 × 1080 @ 60 Hz
18.5 inch monitor: 1366 × 768 @ 60 Hz
1
VGA Cable
Power Adapter
2
Attach the monitor to the base
Remove the monitor and monitor base from its packaging. Carefully
place the monitor face-down on a stable surface. Cushion with a cloth
to avoid scratching the screen.
© Copyright 2021 HP Development Company, L.P.
USB Type-C is a registered trademark of USB Implementers Forum.
The information contained herein is subject to change without notice. The only warranties for HP products and
services are set forth in the express warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
First Edition: March 2021
*M65646-001*
M65646-001