HP P9000 HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357
HP P9000 Manual
View all HP P9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP P9000 manual content summary:
- HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 1
by HP StorageWorks P9000 Remote Web Console and SVP operations. Topics include how to view and redirect log output. The intended audience is a storage administrator or authorized service provider with independent knowledge of HP StorageWorks P9000 disk arrays and HP StorageWorks P9000 software. HP - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 2
2010, 2011 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 3
reference 27 Remote Web Console and SVP operation 27 Command sent from the host...36 Encryption Key operation... Password...43 [ACM] Create User...43 [ACM] Create User Group 44 [ACM] Delete User Groups 44 [ACM] Delete Users...44 [ACM] Edit User...45 [ACM] Edit User Group...45 [ACM] Remove Users - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 4
Disable Auto Delete 49 [BASE] Edit Storage System 49 [BASE] Enable Auto Delete ...53 [BASE] Unlock Forcibly...54 Parallel Access Volumes descriptions 54 [PAV] Add Alias... Quorum Disk ID 56 [ESAM] Del Quorum Disk ID Backup Config...66 [Install] Change Host Group 66 [Install] Change WWN...67 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 5
[Install] M/F Cache Residency 80 [Install] Open Cache Residency 81 [Install] Release LUSE...81 Set Fibre Topology 88 [Install] Set Host Mode...88 [Install] Set IP Address...89 94 [Maintenance] Correction Copy 95 [Maintenance] Drive ] Spare Disk 100 [Maintenance] Switch SVP 100 [Maintenance - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 6
Edit Cmd Dev(DevGrp 120 [PROV] Edit Cmd Dev(Sec 121 [PROV] Edit Command Devices 121 [PROV] Edit DRU Attribute 121 [PROV] Edit Host...122 [PROV] Edit Host Grps(Mode 123 [PROV] Edit Host Grps(Name 125 [PROV] Edit LDEVs(tier)...125 [PROV] Edit MP Blades...125 [PROV] Edit Ports(Address 126 [PROV - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 7
Maintenance descriptions 149 [Remote Maintenance] PS Control 149 [Remote Maintenance] Reboot MP 149 [Remote Maintenance] Reboot Port 150 [Remote Maintenance] Reboot SVP 150 [Remote Maintenance] Switch SVP 150 [Remote Maintenance] Transfer Config 150 Business Copy descriptions...150 Contents - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 8
-S...153 Business Copy Z descriptions Snapshot descriptions...158 [Snapshot] Pairsplit-S...158 SNMP API descriptions...159 [SNMP API] Set SNMP Agent 159 Spreadsheet descriptions...159 [Spreadsheet] CflSet End 159 [Spreadsheet] CflSet Start 160 [Spreadsheet] LUNM Operation 160 Continuous Access - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 9
System-Option 177 Continuous Access Journal Z Ac-J Z] System-Option 186 External Storage descriptions 186 [Ext Stor] Add External Volumes 186 [Ext Stor] Assign Set Reserved Vol 198 Cache Partition descriptions 199 [CPart] commands sent from the host 203 Config Command...203 Contents 9 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 10
user operations 211 Logging in or out...211 Using Actions menu...211 Using Reports menu...222 Using Maintenance menu...223 Using Settings menu...223 Using Resource Lock menu...225 Using Remote Web Console CLI 225 When executing single sign-on from Command View Advanced Edition 225 B Audit log SVP - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 11
Index...236 Contents 11 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 12
: • Operations performed from a Remote Web Console computer or an SVP • Commands that the storage system received from a host or computer using RAID Manager • Operations about encryption key for data encryption The history may not be output in chronological order. This history includes the user, the - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 13
stores a history of all operations performed on a computer using the Remote Web Console feature. This history includes the user, the time of the operation, MM = month DD = day In syslogYYYYMMDD.tgz, there are syslog-svp.log (audit log file for SVP) and syslog-dkc.log (audit log file for DKC). File - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 14
Log File Components (continued) Component When Reaching following events that are logged only maximum capacity, appears in the Remote once in the syslog file. Web Console main window. • [AuditLog], Over Threshold (File has exceeded File 1 (SVP) Figure 2 Audit Log File 2 (DKC) 14 Introduction - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 15
AP indicates the log for Remote Web Console and Remote Method Invocation Applications such as Command View Advanced Edition. • SVP indicates the log for SVP. • RM AP indicates the log for Remote Maintenance Application. • In-band OPEN indicates open-system hosts. • In-band MF indicates mainframe - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 16
Basic Information in Audit Log File (continued) No. Item File 1 (SVP) File 2 (DKC) 8 Task name Task name specified when a task is No output. registered. No task name is output when a user performs operations using the Remote Web Console secondary window. 9 Function name The abbreviation - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 17
to audit logs. For details about configuring only IPv6 communication, see the section describing IPv6 communication in the HP StorageWorks P9000 Remote Web Console User Guide. 14 Application No output Identification 15 Serial number The serial number of the saved log information (0000000000 to - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 18
Symbols Used in Detailed Parameter in Audit Log (SVP) Symbol + and - Definition '+' or number of indents. '-' means that the line continues from the previous line. = Connects an index Tier and output format of the detailed information for the function. • The function name of [PROV] Monitor Tier - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 19
1" (with a blank space before "1") and not as "01". 3 Detected location The host name (SVP). 4 Program name The detection entity identification character (Storage). 5 Unified specification The Unified specification identification character (CELFSS). identification 6 The revision number of - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 20
in hardware and software. • LinkStatus indicates link-up or link-down of ports. • ExternalCommunication indicates communications with other external services. • Authentication of RMI, FC-SP, or Remote Web Console. • AccessControl indicates success or failure in accessing resources. • ContentAccess - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 21
of the application is output. This information is output when commands are sent from the host. 28 Remote Web Console. No parameter is output if the operation has no parameters. 30 The same information contained in the detailed information of the audit log file. * A date and time being set on SVP - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 22
View Only) or Audit Log Administrator (View & Modify) permission to download audit log files. To download the audit log file: 1. Click Audit Log on the upper right of the Remote Web Console main window. The Audit Log Properties dialog box opens Click Download(SVP) or Download(DKC) to open the Save - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 23
, it might take time to transfer it to SVP. When there it appears that no logs have been received from a host or a computer using RAID Manager. Wait for a while, then retry the download. Downloading syslog files Download syslog files to Remote Web Console computer to prevent the old data from being - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 24
or LAN, and then manually transfer the audit log file by clicking Transfer in the Audit Log Transfer window. Then complete the instructions in the SIM in the Audit Log Transfer window. • If the error condition cannot be resolved, download the audit log file to the Remote Web Console computer. If you - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 25
Audit Log Administrator (View & Modify) permission to SVP before applying the setting to transfer audit logs to the syslog server. See the user's manual of the syslog server for the details of the syslog server setting. 2. Open the Remote Web Console the name of the storage system from which you - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 26
user's manual SVP via the system disk. To configure how to store audit logs: 1. Open the Remote Web Console main window. 2. Click Settings→Security→Audit Log Setting. The Audit Log Setting window appears. 3. Click to change to Modify mode. 4. Select one of the following to set the audit log storage - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 27
report Changing information from Command View Advanced Edition Deleting a configuration report Deleting a task Disabling Task Auto Delete function Editing storage system information Enabling Task Auto Delete function Applying a task to the storage system. Remote Web Console and SVP operation 27 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 28
Storage Access Manager External Storage Access Manager External Storage Access Manager External Storage Access Manager External Storage Access Manager External Storage Access Manager Log-related operation on Service Processor (SVP) Install Install Install Install Install Install Install Add Host - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 29
Table 6 Audit Log and Remote Web Console/SVP Operations (continued) Function Name Install Install Install Install Install Cache Residency Machine Install Date Make LUSE Make Volume Micro Program MP Install Open Cache Residency Release LUSE Remove Restore Config. Set Battery Life Set Channel Speed - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 30
Table 6 Audit Log and Remote Web Console/SVP Operations (continued) Function Name Install Install Install Set Open Cache Residency PP Apply PP Available Install Cache Residency Z Cache Residency Performance Monitor Performance Monitor Performance Monitor Performance Monitor Performance Monitor - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 31
Loader Deleting a host group • Deleting a basic volume • Deleting an external volume • Deleting a virtual volume for Snapshot • Deleting a virtual volume for Thin Provisioning Deleting an unnecessary WWN LUN Manager operation using Configuration File Loader Remote Web Console and SVP operation 31 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 32
and Remote Web Console/SVP Operations (continued) Function Name PROV PROV PROV PROV PROV PROV PROV PROV PROV PROV PROV PROV PROV PROV PROV PROV Operation Name Delete LUN Paths Delete Resource Grps Delete WWN DRU Expiration Lock Edit Cmd Dev(Auth) Edit Cmd Dev(DevGrp) Edit Cmd Dev(Sec) Edit Command - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 33
Table 6 Audit Log and Remote Web Console/SVP Operations (continued) Function Name PROV PROV Operation Name Monitor Pools Move Resources Corresponding GUI Operation Starting the performance monitoring of a pool Adding a resource to a resource group Removing a resource from a resourcegroup PROV - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 34
Initialize Option Resync Pair Split Pair Suspend Pair Business Copy Z BC/SS SNMP API Spreadsheet Pairsplit-S Set SNMP Agent CflSet End CflSet Start LUNM Operation Snapshot SNMP Information Executing the CFLSET command using Remote Web Console CLI Configuration File Loader 34 Quick reference - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 35
Pair Edit-EXCTG Journal-Vol Journal-Vol Pair-Option R-Cmd.Dev. Resume-Pair Suspend-Pair System-Option Continuous Access Journal Z Ext Stor Ext Stor Add External Volumes Assign MP Blade Mapping an external volume Assigning a MP blade for an external volume Remote Web Console and SVP operation 35 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 36
and Remote Web Console/SVP Operations (continued) Function Name Ext Stor Ext Stor Ext Stor Ext Stor Operation Name Delete ES VOLs Disconnect ES Paths Disconnect ES VOLs Edit ES Path Config Corresponding GUI Operation Releasing external volume mapping Disconnecting an external path Disconnecting - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 37
a host or a computer using RAID Manager. Indicates that a configuration command was received. FC-SP User Auth Indicates that the FC-SP authentication is completed. A user has logged in to or out from Remote Web Console. Indicates that a user authentication command was received. Encryption Key - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 38
log lost output The following shows the function name and the event name that are output when the audit log by the commands that the storage system accepted from the host has been lost. The "DKCAuditLog was lost" event name will be automatically output only once for each output trigger. Table 11 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 39
and operation that can be performed with Remote Web Console and SVP. The descriptions are listed alphabetically YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [AuditLog],DKCAuditLog was lost,,Error, from=xxxx:xxxx:xxxx:xxxx: 18 SVP Storage: CELFSS,1.1,250001,, 2006-01-04T06:25:18.3Z, Audit Log - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 40
: CELFSS,1.1,250001,, 2006-01-04T06:25:18.3Z, Storage,SVP,AnomalyEvent,Success,,R700:65307,, Japan-Tokyo AuditLog],Over Threshold,,Normal end [AuditLog] Set FTP Server Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [AuditLog],Set FTP Server,,Normal end, from=xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 41
detailed information. The location identification information of the storage system. Not output when setting is not changed ,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [AuditLog],SIM Complete,,Normal end, from=xxxx:xxxx:xxxx:xxxx: service request is solved. The number of SIM reference - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 42
of the operation Normal end: Normal end, Error(xxxxx-yyyyyy): Abnormal end xxxxx: Part code, yyyyyy: Error code The number of user groups The resource group ID allocated to the user group The number of resource groups [ACM] Assign Roles Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 43
the user account is enabled or disabled. Enabled: the account is enabled, Disabled: the account is disabled The authentication server that the user uses. Local: SVP authentication, External: External authentication The name of the user group to which the user ID was added. The number of users that - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 44
SS.xxx,+00:00,RMI AP,uid=user-name,1, Task Name,[ACM],Delete Users,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{User Name}={{User01},{User02}},Num. of Users=2 Detailed information Item User Name Num. of Users Description The user name that was deleted. The number of - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 45
setting is not changed. Enabled: the account is enabled, Disabled: the account is disabled. The authentication server that the user uses. A hyphen (-) appears if the setting is not changed. Local: SVP authentication, External: External authentication The number of users that were edited. [ACM] Edit - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 46
Remote Web Console. BASE descriptions [BASE] Certificate Update Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user- User Account Information,Normal end}, {Environment Parameter List,Normal end}, {Audit Log Transfer Information,Normal end}, {External Authentication,-}, {External Application - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 47
User Account Information,Normal end}, {Environment Parameter List,Normal end}, {Audit Log Transfer Information,Normal end}, {External Authentication,-}, {External Application ReportName,UserName,FolderName,StartTime} ={XXXXXXX,manager,YYYYYYYYYY,YYYYMMDDHHMMSS} Detailed information Item ReportName - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 48
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[BASE],Delete Reports,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx :xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Task Name,Type,User Name,Submission Time,Result} =[{20100101-EditSubsystem,Edit Subsystem,User01, YYYY/MM/DD - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 49
the task. ID of the user who performed the operation. Time when the task was registered. Result of the operation Normal end: normal end, Error (xxxx-yyyy): Abnormal end, -: not selected xxxx: part code, yyyy: error code Number of the target tasks. [BASE] Edit Storage System Example 07xx,YYYY/MM/DD - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 50
Number of the target tasks. [BASE] Entry Tasks This log is output when each task on the Remote Web Console menu is performed. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[BASE],Entry Tasks,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 51
Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,0,, [BASE],HCSSO SetOneTimeKey EntryOver,Error(xxxxx-yyyyy), from=xxxx:xxxx:xxxx:xxxx:xxxx Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [BASE],Login,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 52
: error code Number of the target tasks. [BASE] Set CVAE Info Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [BASE],Set CVAE Info,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{ID,ProductName,VersionInfo,IPAddress,RegistryDate, LastAccessDate - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 53
information that was deleted. Product name (Hi-Command) Version information Network address information (IPv4, IPv6 initial registration Time stamp of the final access Memo space information The number of CVAE DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [BASE],Set Up HTTP Block,,Normal end, from= - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 54
] Unlock Forcibly Example 07xx,YYYY/MM/DD,HH:MM.SS.xxx, 00:00,RMI AP,uid=user-name,1,, [BASE],Unlock Forcibly,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx Parallel Access Volumes descriptions [PAV] Add Alias Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 55
/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [E-Mail],MailAddress Write,,Normal end, from=xxxx:xxxx:xxxx: Accounts=32 Detailed information Item MailServerSetting MailServer SMTP AUTH Account FromAddress ReturnAddress UsedCount Description The specification type of the server. HostName: Host - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 56
may not have an account setting. [E-Mail] Valid Flag Update Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [E-Mail],Valid Flag [ESAM] Add Quorum Disk ID Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [ESAM],Add Quorum Disk ID,,Normal end, from - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 57
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [ESAM],Del Quorum Disk ID,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Quorum Disk ID,Paired S/N,Controller ID, Quorum Disk(LDKC:CU:LDEV),Result} =[{0x01,64024,6,0x00:0xFE:0x01,Normal end}, {0x02,64024 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 58
Detailed information Item P-VOL(Port-G-ID-LUN) S-VOL(Port-G-ID-LUN) S/N LDKC ID Controller ID Initial Copy Fence Level Copy Pace Priority Diff Quorum Disk ID Result Num. of Pairs Description The port number, host group number, and LUN of the volume specified to the primary volume when the pair is - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 59
Copy Pace Priority Result Num. of Pairs Description The port number, host group number and LUN of the primary volume in the restored pair sequentially. The port number, host ,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [ESAM],Pairsplit-r,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 60
Description The port number, host group number, and LUN of the primary volume in the deleted pair sequentially. The port number, host group number, and LUN of Log Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Information],Delete Log,SIM,Normal end, from=xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 61
. Record of a deleted HTP log. Record of a deleted Diagnosis log. Record of a deleted Copy History log. [Information] ORM Value Example 1: changing the threshold of SAS 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Information],ORM Value,Alter,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 62
request are solved. The number of the SIM reference code whose error and service request are solved. [Information] SIM Reporting Option Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Information],SIM Reporting Option,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 63
Service Num. of Types Description The type of SIM. DKC SIM: SIM related to storage system Cache SIM: SIM related to cache Media SIM: SIM related to recording media Device SIM: SIM related to disk /MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Information],Threshold Value,Error Reset,Normal end - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 64
The name of the port where the host group has been newly added. The newly added host group number. The name of the newly added host group. The newly added host mode. Please see the HP StorageWorks P9000 Provisioning for Open Systems User Guide for the meaning of the host mode number. 64 Audit log - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 65
. Num. of WWNs The number of WWNs of the host registered in the host group. Num. of Host Groups The number of added host groups. [Install] Add LU Path Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Add LU Path,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 66
Item Description Ver. The version number of the configuration information to be backed up. [Install] Change Host Group Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Change Host Group,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Port - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 67
the name is changed, the name after change is indicated. Num. of Host Groups The number of host groups where the settings have been changed. [Install] Change WWN Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Change WWN,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 68
WWN is a 16-digit number in the hexadecimal format. The number of deleted Login WWNs. [Install] Delete Host Group Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Delete Host Group,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Port,HostGrpID - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 69
where the host deleted from host group was connected. The host group number where the host is deleted. Indicates WWN of the host deleted from the host group. The number of hosts (WWN) deleted from the host group. [Install] Dku Emulation Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 70
the LUNs where the reserve attribute of the host is forcefully cancelled. [Install] Format The logged information indicates that the Format operation was only requested but not completed. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Format,,Normal end, from=xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 71
group number. E1-1: For an external volume V1-1: For a virtual volume X1-1: For a Thin Provisioning volume The number of parity groups. The LDEV number. The number of LDEVs. [Install] Initialize ORM Value Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Initialize ORM - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 72
4MP}, {DKA-2ML,DKF 4MP},{DKA-2XL,DKF 4MP}],Num. of DKAs=4 +{DKU,Kind}=[{DKU-11,2.5" DKU}],Num. of DKUs=1 +{PG,RAID Level,Drive Type,Protection Level,Emulation, Concatenation,Encryption} ={3-1,RAID1 (2D+2D),DKR5C-J600SS,Standard,OPEN-V,-,Disable}, ++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 73
parity group number. A hyphen (-) is indicated when the parity group is not RAID concatenated. Encryption The status of the encryption setting. 0-31: Encryption Key ID Disable: Disabled. LDKC:CU:LDEV Size Unit System Disk The LDKC number, the CU number, and the LDEV number. The capacity of - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 74
CUs. NOTE: Only the changed items will be output. Example 4: installing additional power supply 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Install,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +DKCPS=[DKCPS-02,DKCPS-03],Num. of DKC PSs - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 75
installed Example 6: installing additional MPB 07xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,SVP,uid=user-name,1,, [Install],Install,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{SVP}={SVP-OPTION} +{IPAddress,SubnetMask}={(123.456.789.123),(255.255.255.255)} +Use Duplex=Valid - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 76
, Subnet Prefix length: The value of subnet prefix) Example 8: installing additional SM PP flag 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Install,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +PP Flag=[(64KLDEV, SI/VM Extension1, FCV2, DP - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 77
Slot Emulation Size Unit System Disk SSID MPB Num. of LDEVs Description The parity group number. E1-1: In case of an external volume. V1-1: In storage system ID. The ownership of the MPB. The number of LDEVs. [Install] Machine Install Date Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 78
/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Make Volume,,Normal end, from=xxxx :xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{PG,LDKC:CU:LDEV,Slot,Emulation,Size,Unit,System Disk,SSID,MPB} =[{1-1,0x00:0x14:0x00,-,OPEN - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 79
disk. Disable or Enable will appear. The storage system ID. The ownership of the MPB. The number of LDEVs. [Install] Micro Program Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user CD-ROM: CD-ROM, HD: Hard Disk, HD Backup: HDD Backup (version down), or Remote: Remote transfer). The method to - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 80
of the installed processor. The number of processors installed. [Install] M/F Cache Residency Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],M/F Cache Residency,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +LDKC:CU:LDEV=0x00:0x00:0x00 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 81
,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Open Cache Residency,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx . [Install] Release LUSE Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Release LUSE,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 82
Adapter mounting location. The kind of PCB mounted. The number of Channel Adapters. Example 2: removing a Disk Adapter (DKA), an ECC Group or an LDEV 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Remove,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 83
flags. Max Number of CUs The maximum number of CUs. Example 4: removing a power supply 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Remove,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +DKCPS=[DKCPS-02,DKCPS-03],Num. of DKC PSs - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 84
the PCI is installed or not. ON: Installed, OFF: Not installed Example 6: removing MPB 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Remove,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx {MPB,Auto LDEV Assignment} =[{MPB-1MB,Enable},{MPB-2MD - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 85
: IP address, Subnet Prefix length: The value of subnet prefix) Example 8: removing SM PP flag 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Remove,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +PP Flag=[(64KLDEV, SI/VM Extension1, FCV2, DP - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 86
Ver. Description The new version number. The old version number. [Install] Set Battery Life Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Set Battery Life,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Use Battery Life,Date,Remained Life - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 87
is enabled or disabled. Disable or Enable will appear. The number of logical volumes where the command device is set. [Install] Set DevGrpDef Example 07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Set DevGrpDef,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 88
Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Set Fibre Topology,,Normal end, from=xxxx:xxxx:xxxx host group belongs. The host group number. The host mode set. Please see the HP StorageWorks P9000 Provisioning for Open Systems User Guide for the meaning of the host - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 89
see the HP StorageWorks P9000 Provisioning for Open Systems User Guide for the meaning of the host mode number. Num. of Host Groups The number of host groups that the host mode setting is changed. [Install] Set IP Address Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 90
address, Subnet Prefix length: The value of subnet prefix) [Install] Set Security Switch Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Set Security Switch,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Port,Switch}=[{XX,Disable},{XX,Enable - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 91
/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],System Option,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Spare Disk Recover=Full Speed +Disk Copy Pace=Slower +Copy Operation(Correction Copy)=OFF +Copy Operation(Dynamic Sparing)=OFF +Read Configuration Data - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 92
LPR,Command Control}=[{System,10}],Num. of LPRs=1 +{LPR,Mode,Set}=[{System,0,ON}],Num. of Modes=1 +Debug Mode=Set Detailed information Item Spare Disk Recover Description Indicates the setting status of Spare Disk Recover. Interleave: Give priority to the access from the host while executing copy - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 93
number of ports. The LDKC number and the CU number. The LDEV number. The storage system ID. The number of storage system IDs. [Install] Update Config Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Install],Update Config,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 94
The parity group number. E1-1: In case of an external volume. V1-1: In case of a virtual volume. X1 /MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Maintenance],Blockade,,Normal end, from=xxxx: location of the PCB (Channel Adapter (CHA), Disk Adapter (DKA), CM, or MPB)to be blocked. The number - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 95
Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Maintenance],Correction Copy,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +PDEV=HDD000-00 Detailed information Item PDEV Description The mounting location of - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 96
PGs LDEV Num. of LDEVs Description The parity group number. E1-1: In case of an external volume. V1-1: In case of a virtual volume. X1-1: In case of a Thin suspended. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Maintenance],Pre QuickFormat Stop,,Normal end, from=xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 97
Num. of LDEVs Description The parity group number. E1-1: In case of an external volume. V1-1: In case of a virtual volume. X1-1: In case of a Channel Adapter (CHA), a Disk Adapter (DKA), cache memory, MPB, and a ESW 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Maintenance], Replace,, - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 98
Replace,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +PDEV=HDD000-00 +Copy=Restore Data Example 5: replacing a SSW 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Maintenance], Replace,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 99
an external volume. V1-1: In case of a virtual volume. X1-1: In case of a Thin Provisioning volume. The number of parity groups. The LDKC number, the CU number, and the LDEV number. The number of LDEVs. [Maintenance] Restore Data Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 100
location of the PCB (Cache Memory (CM)) The number of PCBs The cache capacity [Maintenance] Spare Disk Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Maintenance],Spare Disk,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +PDEV=HDD000-00 Detailed - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 101
suspended. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,, [Maintenance],Verify Stop,,Normal end, from=xxxx:xxxx:xxxx:xxxx: PGs LDEV Num. of LDEVs Description The parity group number. E1-1: In case of an external volume. V1-1: In case of a virtual volume. X1-1: In case of a Thin - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 102
Performance Monitor descriptions [Perf Mon] Cache Residency Prestaging Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Perf Perf Mon] Delete Open Cache Residency Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Perf Mon],Delete Open Cache Residency,,Normal - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 103
SW Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[Perf Mon],Edit Monitoring SW,Enable 60sec, Normal end, from=xxxx:xxxx Name,0xXXXXXXXXXXXXXXXX, XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,}],Num. of WWNs=2 Performance Monitor descriptions 103 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 104
Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[Perf Mon],Edit WWN MonitorMode,,Normal end, from=xxxx:xxxx:xxxx Residency Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Perf Mon],Set M/F Cache Residency,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 105
. [Perf Mon] Set Open Cache Residency Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Perf Mon],Set Open Cache Residency,,Normal end, Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PP KEY],PP Available Install,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 106
Disable chk Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PP KEY],PP Disable chk,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx Enable chk Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PP KEY],PP Enable chk,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 107
Name=C:\Dkc200\Home\Sample.plk ++{P.P.Name,Result}=[{JAVA API,Normal end}, -{LUN Manager,Normal end}],Num. of PPs=2 Detailed information Item File Name P.P.Name Result Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PP KEY],PP Removal chk,,Normal end, from=xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 108
] Add Host Group This log is output when LUN Manager operation is performed using Configuration host group. Mode The new host mode. See HP StorageWorks P9000 Provisioning for Open Systems User Guide for the description of the host mode number. Option[0:31] Option[32:63] Option[64:95] The new host - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 109
adapter for the host registered in the host group. The number of registered hosts (WWN). [PROV] Add LU Path This log is output when LUN Manager operation is performed using Configuration File Loader. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,,uid=user-name,1,, [PROV],Add LU Path,,Normal - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 110
of the logical volume linked to the host group. The number of LU paths set. [PROV] Add WWN This log is output when LUN Manager operation is performed using Configuration File Loader. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,,uid=user-name,1,, [PROV],Add WWN,,Normal end, from - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 111
This log is output when LUN Manager operation is performed using Configuration File Loader. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PROV],Change Host Group,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Port,HostGrpID,HostGrpName}=[{XX - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 112
: Reference code of the SIM The number of SIMs with resolved errors and service request status. [PROV] Create Host Groups Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Create Host Groups,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 113
Unit System Disk MP Blade ID Num. of LDEVs Description The parity group number. An E at the beginning of a parity group number designates an external volume is size calculation in HP StorageWorks P9000 Provisioning for Mainframe Systems User Guide. Indicates system disk status. Enable: Enabled - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 114
. For a Snapshot volume, a hyphen (-) is output, because you specify volume when you create V-VOLs for Snapshot. The logical DKC, CU, MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Create Resource Grps,,Normal SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Create Pools,,Normal end - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 115
Snapshot, it does not output any value. Tier Management The auto control mode of the created or expanded pool. Auto: Auto, Manual: Manual Cycle Time The cycle of performance ends (minute). Monitoring Mode The monitoring mode Continuous Mode: Continuous mode, Period Mode: Period mode Pool - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 116
Group This log is output when LUN Manager operation is performed using Configuration File Loader. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PROV],Delete Host Group,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Port,HostGrpID}=[{XX,0xXXX},{XX - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 117
of a parity group number designates an external volume is present in that parity group. The LDKC, CU, and LDEV numbers. The number of LDEVs. Example 2: Snapshot 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Delete LDEVs,Snapshot,Normal end, from=xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 118
when LUN Manager operation is performed using Configuration File Loader. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PROV of Paths Description The name of the port to which the host group belongs. The host group number where the LU path is deleted. Indicates LUN where - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 119
Paths Description The name of the port to which the host group belongs. The host group number where the LU path is deleted. Indicates LUN output when LUN Manager operation is performed using Configuration File Loader. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PROV], - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 120
The expiration-lock setting is enabled in the storage system. The expiration-lock setting is disabled in the storage system. [PROV] Edit Cmd Dev(Auth the command device authentication setting is changed. [PROV] Edit Cmd Dev(DevGrp) Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 121
or Enable will appear. The number of logical volumes that the command device security setting is changed. [PROV] Edit Command Devices Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Edit Command Devices,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 122
been set. * When bit 5, 6, and 7 are all 0 (zero), Read/Write has been set. [PROV] Edit Host Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Edit Host,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Port,HostGrpID,WWN - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 123
port to which the host group belongs. The host group number where the host group names have been changed. The specified host mode. See the HP StorageWorks P9000 Provisioning for Open Systems User Guide for the meaning of the host mode number. The specified host mode option. 96 host mode options from - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 124
44 45 46 47 Value of Option[32:63] 0x80000000 0x40000000 0x20000000 0x10000000 0x08000000 0x04000000 0x02000000 0x01000000 0x00800000 0x00400000 0x00200000 0x00100000 0x00080000 0x00040000 0x00020000 0x00010000 Host mode option 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 Value of Option[32:63 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 125
, the name after change is indicated. Num. of Host Groups The number of host groups where the settings have been changed. [PROV] Edit LDEVs(tier) Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Edit LDEVs(tier),,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 126
The number of specified MP Blades (1 to 8). [PROV] Edit Ports(Address) Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Edit Ports(Address),,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Port,Fibre Addr.}=[{XX,1},{XX - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 127
of Fibre Channel Port (continued) Value Address* Value Address YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Edit Ports(Attr),,Normal end, from=xxxx: Initiator: Initiator port, RCU Target: RCU Target port, External: External port The name of the port where the setting is - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 128
) Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Edit Ports(Speed),,Normal end, from=xxxx:xxxx:xxxx:xxxx: Topology) Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Edit Ports(Topology),,Normal end, from=xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 129
RMI AP,uid=user-name,1, Task Snapshot,20,,,Normal end}],Num. of Pools=3 Detailed information Item Command Pool ID Pool Type Description The operation on the pool. Change: Changing pool information about the threshold and the subscription limit Change Tier: Changing information about Smart Tiers - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 130
Snapshot, it does not output any value. This item is output only when "Command" is "Change." Tier Management The auto control mode of the created or expanded pool. Auto: Auto, Manual: Manual This item is output only when "Command" is "Change Tier 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Edit - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 131
V-VOLs Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Expand V-VOLs,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Format LDEVs,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 132
Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Format LDEVs(Q),,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx Pools Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Initialize Pools,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 133
Execute: Not Executed xxxx: Part code, yyyyy: Error code The number of pools where the performance monitoring started. [PROV] Move Resources Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Move Resources,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 134
: Error code Num. of Ports Port(HostGrp) HostGrpID HostGrpResult The number of moved ports The port name of a moved host group The host group ID of the moved host group The result of the host group Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end, xxxx: Part code, yyyyy: Error code Num. of - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 135
. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Reclaim Zero Pages,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx LUSE Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PROV],Release LUSE,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 136
Description The pool ID of a pool where the tier relocation was performed. The result of relocating the tier of pools. Normal end: Normal end, Error tier relocation started. [PROV] Remove Hosts Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Remove Hosts,, - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 137
number of the restored pool. [PROV] Set Channel Speed This log is output when LUN Manager operation is performed using Configuration File Loader. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PROV],Set Channel Speed,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 138
logical volumes where the command device is set. [PROV] Set DevGrpDef This log is output when LUN Manager operation is performed using Configuration File Loader . Example 07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 139
name has been set. The number of the host group where user name has been set. The setting status of the user name that is registered to the host group. Add: Add user name, Change: Change user name, Delete: Delete user name. UserName The user name added or deleted when Kind is Add or Delete. The - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 140
FCSP Target Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PROV],Set FCSP Target,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx: of the port that includes the host group where authentication parameter has been set. The number of the host group where authentication has been set - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 141
Item UserName Num. of Grps Description The user name of the host group. The number of host groups where authentication parameter has been set. [PROV] Set Fibre Address This log is output when LUN Manager operation is performed using Configuration File Loader. Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 142
. See the HP StorageWorks P9000 Provisioning for Open Systems User Guide for the description of the host mode number. Num. of Host Groups The number of host groups that the host mode setting is changed. [PROV] Set Security Switch This log is output when LUN Manager operation is performed using - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 143
is output when LUN Manager operation is performed using Configuration File Loader. Example 07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PROV],Set UserAuth 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV],Shrink Pool,,Normal end, from=xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 144
of pools where the performance monitoring stopped [PROV] Stop Reclm ZeroPages Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[ Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [PROV],Stop Relocating ,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 145
the pools where the tier relocation was stopped. [PROV] Stop Shrinking Pool Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[PROV is used 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [RCU],Add Path,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 146
Free is used 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [RCU],Add RCU,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,, is not used 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [RCU],Add RCU,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 147
remote I/O). The unit is millisecond. This value is output when Continuous Access Synchronous or Continuous Access Synchronous Z is used. Indicates whether CGROUP (FREEZE/RUN) PPRC TSO command support RMI AP,uid=user-name,1,, [ Remote I/O Missing Interrupt Handler) timer (wait time until data copy from - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 148
remote I/O) after change. The unit is in milliseconds. This value is output when Continuous Access Synchronous or Continuous Access Synchronous Z is used. Indicates whether CGROUP (FREEZE/RUN) PPRC TSO command support :MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [RCU],Delete Path,,Normal end, from=xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 149
not used 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [RCU],Delete RCU,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx RCU deleted. Remote Maintenance descriptions [Remote Maintenance] PS Control Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RM AP,,,, [Remote Maintenance],PS - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 150
.xxx, 00:00,RM AP,,,, [Remote Maintenance],Switch SVP,,Normal end,,,Seq.=xxxxxxxxxx [Remote Maintenance] Transfer Config Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RM AP,,,, [Remote Maintenance],Transfer Config,,Normal end,,,Seq.=xxxxxxxxxx Business Copy descriptions [BC/SS] Change Reserve Example - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 151
Option Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [BC/SS],Option,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Swap & Freeze=Enable,HOST I/O Performance =Enable,Reserve03=Enable,(snip),Reserve32=Disable Detailed information Item Swap & Freeze - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 152
Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [BC/SS],Pairresync,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Copy Pace=Faster,Resync Type=Normal Copy ++{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),Result} =[{0xXX:0xAA:0xBB,0xYY:0xCC - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 153
pairs. [BC/SS] Pairsplit-S Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [BC/SS],Pairsplit-S,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{P-VOL( {0xAA:0xBB:0xCC,0xDD:0xEE:0xFF,Error(xxxx-yyyy)}], Num. of Pairs=2 Business Copy descriptions 153 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 154
, Error (xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code The number of deleted pairs. Business Copy Z descriptions [BC Z] Add Pair Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [BC Z],Add Pair,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 155
/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [BC Z],CTG,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{CTG,Command,Result} =[{0x00,Add,Normal end},{0x01,Delete,Error(xxxx-yyyy LDEV numbers of the target volume in the deleted pair. Business Copy Z descriptions 155 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 156
uid=user-name,1,, [BC Z],Option,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Swap & Freeze=Enable,HOST I/O Performance =user-name,1,, [BC Z],Resync Pair,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Copy pace=Faster,Resync Type=Normal Copy - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 157
DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [BC Z],Split Pair,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Copy pace=Faster,Split Type=Quick Split ++{S-VOL(LDKC:CU: end xxxx: Part code, yyyyy: Error code The number of split pairs. Business Copy Z descriptions 157 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 158
-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code The number of suspended pairs. Snapshot descriptions [Snapshot] Pairsplit-S Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Snapshot],Pairsplit-S,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 159
Agent Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [SNMP API],Set SNMP Agent,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Install=Disable +Manager=[(158.214.133.1),(158.214.133.2),(158.214.133.3), (1:0:0:0:0:0:0:1),(snip) -(158.214.133.31 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 160
Continuous Access Synchronous user-name,1,, [Cnt Ac-S],Change Option,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{Max Initial Copy,CU Activity,Path Blockade Watch(s), Path Blockade SIM Watch(s),Service SIM}={128,Enable,45,070, Not Report} +{LDKC,CU,Service SIM,PPRC Support - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 161
, Not Report LDKC CU Service SIM The LDKC number. The CU number of the connected CU. Indicates whether to report the remote copy-related SIM. Report, Not Report PPRC Support Indicates whether the host supports PPRC. Yes: support, No: not support SCP Time(s) Max Initial Copy Num. of CUs The - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 162
Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-S],Paircreate,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx: LUN) S/N LDKC ID Controller ID Type Initial Copy Fence Level Copy Pace Priority Description The port number, host group number, and LUN of the volume specified - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 163
copy at a time). The priority of restoring operation set (scheduling order). Indicates whether to change a Continuous Access Synchronous pair to an ESAM pair. Yes: Change to ESAM pair. No: Keep Continuous Access Synchronous pair as it is. The Quorum Disk :00,RMI AP,uid=user-name,1,, [Cnt Ac-S], - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 164
Pairs Description The port number, host group number, and LUN of the primary volume in the split pair sequentially. The port number, host group number, and LUN of 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-S],Pairsplit-S,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 165
-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code The number of deleted pairs. Continuous Access Synchronous Z descriptions [Cnt Ac-S Z] Add Pair Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-S Z],Add Pair,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 166
, Not Report LDKC CU Service SIM The LDKC number. The CU number of the CU on the primary site. Indicates whether the remote copy related SIM is reported or not. Report, Not Report PPRC Support Indicates whether the host supports PPRC or not. Yes: Support, No: Not support SCP Time(s) Max Initial - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 167
Copy to R-VOL: Copy to main and remote volume is enabled The result of operation. Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code The number of changed pairs. [Cnt Ac-S Z] Clear SIM Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 168
,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-S Z],Function Switch,,Normal end, xxxxxxxxxx +{M-VOL(LDKC:CU:LDEV),R-VOL(LDEV),Fence Level,Copy Pace, Priority,TS,Result} =[{0x00:0x00:0x00,0xFE, in the restored pair. The LDEV number of the remote volume in the restored pair. The fence level set - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 169
copy speed set (the number of tracks you can copy at a time by restoring). The priority of the restoring operation set (scheduling order). Indicates whether or not the host xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-S Z],Script Remote volume. Continuous Access Synchronous Z descriptions 169 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 170
code The number of split pairs. Continuous Access Journal descriptions [Cnt Ac-J] Change-JNL-Option Example 07xx,YYYY xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J],Change-Mirror-Option,,Normal end, from xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{LDKC,JNL,MirrorID,Copy Pace,Path Watch Time, Forward Path Watch Time - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 171
Delta resync operation have failed. Entire: Copy the entire data volume, None: Do not copy the data volume Result The result of 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J],Journal-Vol,Delete,Normal end, from=xxxx:xxxx:xxxx:xxxx Continuous Access Journal descriptions 171 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 172
the journal belongs. The journal number. Indicates if the journal supports 2DC Cascade. No: Not supported, Yes: Supported. The LDKC, CU, and LDEV numbers. The result Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J],Journal-Vol,Delete-JNL,Normal end, from=xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 173
host group number, and LUN of the secondary data volume. The mirror ID. The serial number of the logical device (storage system). The controller ID. The priority of copy. The consistency group ID. Indicates whether initial copy Normal end}], Num. of Pairs=2 Continuous Access Journal descriptions 173 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 174
host group number, and LUN of the secondary data volume. The mirror ID. The serial number of the logical device (storage system). The controller ID. The priority of copy 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J],Pairsplit-r,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 175
,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J],Pairsplit-S,,Normal end, from=xxxx:xxxx:xxxx:xxxx: number, host group number and LUN of the secondary data volume. The mirror ID. The serial number of the logical device (storage system). . Continuous Access Journal descriptions 175 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 176
Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J],R-Cmd.Dev.,Assign,Normal end, from=xxxx:xxxx:xxxx:xxxx: Basic information Parameter Assign Release Description The remote command device is assigned. The remote command device is released. Detailed information Item - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 177
Description Indicates the number of volumes copiable at a time by one initial copy. Continuous Access Journal Z descriptions [Cnt Ac-J Z] Add-Pair Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J Z],Add-Pair,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 178
group ID (Default fixed) setting for the storage system. The error level: Mirror: Mirror level, Volume: Volume level Indicates whether the cache-fast-write data is copied to the secondary data volume is enabled or not. Only P-VOL: Not copied, Copy to S-VOL: Copied The result of operation. Normal end - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 179
user-name,1,, [Cnt Ac-J Z],Change-Mirror-Option,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{LDKC,JNL,MirrorID,Copy MirrorID Copy Pace speed of initial copy. Low: Low Copy the entire data volume, None: Do not copy 00,RMI AP,uid=user-name,1,, [Cnt AP,uid=user-name,1,, [ - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 180
CU and LDEV numbers. The mirror ID. The serial number of the logical device (storage system). The controller ID. N/A will be output when CTRLID is set by using -EXCTG Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J Z],Edit-EXCTG,Add,Normal end, from=xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 181
extended consistency group. The LDKC number to which the journal belongs. The journal number. The mirror ID. The serial number of the logical device (storage system). The controller ID. The LDKC, CU, and LDEV numbers of the remote command ,uid=user-name,1,, Continuous Access Journal Z descriptions 181 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 182
Journal-Vol Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J Z],Journal-Vol,Delete-JNL,Normal end, from=xxxx:xxxx:xxxx:xxxx: The journal is deleted. The journal is forcibly deleted from the extended consistency group. Detailed information Item LDKC JNL Result Num. of - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 183
copy the CFW data to the secondary data volume is enabled or not. Only P-VOL: Copy to the primary data volume only is enabled. Copy To S-VOL: Copy 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J remote command device is assigned. The remote command device is released. Continuous Access Journal Z - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 184
. • When releasing a remote command device. The result of operation. Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code The number of mirrors changed. [Cnt Ac-J Z] Resume-Pair Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 185
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Cnt Ac-J Z],Suspend-Pair,,Normal end, from=xxxx:xxxx: numbers. The mirror ID. The serial number of the logical device (storage system). The controller ID. N/A will be output when CTRLID is mode Continuous Access Journal Z descriptions 185 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 186
time during an initial copy operation. The LDKC and CU numbers. Whether to report SIM to the host or not. Report. Not report. The number of CUs (fixed to 510). External Storage descriptions [Ext Stor] Add External Volumes Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 187
The serial number the external storage system that the mapped external volume exists. The identification character 1 of the mapped external volume. The identification character 2 of the mapped external volume. The device name that the mapped external volume notifies to the host. The capacity of the - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 188
-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code The number of groups of configured external volumes. [Ext Stor] Delete ES VOLs Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[Ext Stor],Delete ES VOLs,,Normal end, from=xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 189
of the external storage system. The result of operation. Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code The number of mapping paths that has been disconnected. [Ext Stor] Disconnect ES VOLs If this operation is performed from Remote Web Console, this - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 190
the disconnected external volume. [Ext Stor] Edit ES Path Config Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, port name of the external port of the local storage system. The WWN of the Target port of the external storage system. The LUN of the external volume. The result of - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 191
,uid=user-name,1, External WWNs,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +{WWN,I/O-TOV,Quedepth,LinkDown,Result} =[{50060E8000C3E214,15,8,180,Normal end}, {50060E8000C3E214,15,8,180,Normal end}, {50060E8000C3E214,15,8,180,Normal end},Num. of WWNs=3 External Storage - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 192
The WWN of the external storage system. The I/O time over value setting. The Quedepth value (the number of commands issuable). The Path Stor] ProfileUpgrade Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00, SVP,uid=user-name,1,,[Ext Stor], ProfileUpgrade,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 193
uid=user- external storage system. The result of operation. Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code The number of mapping paths that path status has been checked. [Ext Stor] Reconnect ES VOLs If this operation is performed from Remote Web Console - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 194
code The number of the external volumes moved to the new path group. Auto LUN descriptions For information on using Auto LUN, contact HP Technical Support. [Auto LUN] Create Auto YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Auto LUN],Del Auto Plan Log,,Normal end, from=xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 195
Migration Log Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Auto LUN],Del Migration Log,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Auto LUN],Set Auto Plan Param,,Normal end, from=xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 196
displayed in the alphabet from A to Z. The threshold (the upper limit of the disk usage rate) after it changes. The threshold is displayed by the number from 1 to PG Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Auto LUN],Set Fixed PG,,Normal end, from=xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 197
the application is output. The result of operation. Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code The number of manual migration plans set and deleted. [Auto LUN] Set Plan Condition Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 198
specified upper limit of the disk usage rate. The upper limit of the disk usage rate is displayed by ,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [Auto LUN],Set Reserved Vol,,Normal end, the right of the colon is an LDEV number. The application that sets this reserved volume of Auto LUN. When a - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 199
setting is changed. Cache Partition descriptions [CPart] Edit CLPR Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [CPart],Edit CLPR An E at the beginning of a parity group number designates an external volume present in that parity group. The number of parity groups assigned - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 200
Remote Web Console 0xXX: Owner ID is expressed in two hexadecimal digits. [Shredder] End Shredding Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP . Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[Shredder],Shred LDEVs,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 201
of LDEVs Shred LDEV Num. of LDEVs Description The owner ID 0: Indicates Remote Web Console 0xXX: Owner ID is expressed in two digits of the hexadecimal format The Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,, [XRC],Set XRC Option,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx: - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 202
Item LV1 SIM LV2 Suspend Num. of CLPRs Description The status of Level 1 SIM. Enable: enabled, Disable: disabled The status of Level 2 Suspend. Enable: enabled, Disable: disabled The number of CLPRs. HDD Easy Replace descriptions [HDDEasyReplace] Replace Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 203
0123456789ABCDEF • Out-of-band The computer using the RAID Manager. • from=host-name The name of the host that sent the command. • Detailed Information The commands and the parameters that the storage system received from the host are output. The meaning of the output information is - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 204
=2 Table 16 Create Keys Operation Item Enc Key Number Num. of Keys Description The encryption key number. The number of the encryption keys. [ENC] Delete Keys 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[ENC],Delete Keys,,Normal end, from=xxxx:xxxx:xxxx:xxxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 205
Table 18 Edit Encryption Operation (continued) Item Enc Key Number Description The encryption key number. When "Encryption" is Disable, a hyphen (-) is output. Num. of PGs The number of parity groups. [ENC] Restore Keys 07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1, Task Name,[ENC - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 206
Item from Alias HPSIM Description The IP address or network address of the user that tried to import the certificate. The alias when registering the certificate. The IP address or network address of HP System Insight Manager server. [BASE] Delete Certificate Example 07xx,YYYY/MM/DD,HH:MM:SS.xxx - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 207
-NEC00\Administrator,from=158.214.135.87, SSO UA=Administrator Detailed information Item User from SSO UA Description The user name of Single Sign-On. The IP address of HP System Insight Manager Server. The user access authority of Single Sign-On. Administrator: Administrator, Operator: Operator - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 208
P9000 Remote Web Console Messages • HP StorageWorks P9000 Remote Web Console User Guide You can find these documents on the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals In the Storage section, click Disk Storage Systems for hardware or Storage Software - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 209
• http://www.hp.com/support/manuals • http://www.hp.com/support/downloads • http://www.hp.com/storage/whitepapers Conventions for storage capacity values P9000 disk arrays use the following values to calculate physical storage capacity values (hard disk drives): • 1 KB (kilobyte) = 1,000 bytes • 1 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 210
harm or death. CAUTION: Indicates that failure to follow directions could result in damage to equipment or data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints and shortcuts. 210 Support and other resources - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 211
a user performs an operation using each Remote Web Console menu, clicking a button on the main window, or using General Tasks. Logging in or out Table 20 Logging in to or out from Remote Web Console GUI SSID LDEV Name PROV PROV Delete LDEVs LDEV Name Edit LDEVs(tier) Logging in or out 211 - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 212
(continued) Add LUN Paths Delete LUN Paths LUN Expansion Edit Command Devices Assigning a MP blade PROV Mapping an LUN log information is output in the order of the operations performed. • If you perform the following operations at the same time, the following occurs Audit log user operations - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 213
to the selected host group Add to Host Groups Adding the selected host to a host group Remove Hosts Removing a host from a host group Delete Login WWNs Deleting an unnecessary WWN Edit Host Editing host settings Create Alternate LUN Paths Creating an alternate LUN path Copy LUN Paths Edit - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 214
Table 23 Port/Host Group (continued) GUI operation Submenu Authentication Audit Log Output Description Function Name Setting port information PROV Setting default such as user name and secret Operation Name Set FCSP Port Info1, 2 Registering or deleting authentication information - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 215
Name Enabling/disabling the ENC encryption in a parity group level. Edit Encryption Table 26 External Storage GUI operation Audit Log Output Submenu Description Function Name Operation Name Add External Volumes Mapping an external volume Ext Stor Add External Volumes Assign MP Blade - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 216
-S* The function name is Snapshot when a Snapshot pair is deleted. Change Snapshot Pairsplit-S Snapshot Pairsplit-S* * When you apply two or more settings of the same type to the storage system at the same time, the log information is output as one entry. Table 28 Local Copy > Business Copy - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 217
Table 29 Remote Copy > Continuous Access Synchronous GUI operation Audit Log Output Submenu Pair Operation Disk Operation Add Quorum Disk ID ESAM Add Quorum Disk ID1 Delete Quorum Disk ID ESAM Del Quorum Disk ID1 1 When you apply two or more settings of the same type to the storage - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 218
Remote Copy > Continuous Access -J Assign Remote Command Cnt Ac-J Device Release Remote Command Device Cnt Disk Controller (DKC) RCU Add RCU Change Disk Controller RCU (DKC) Option Change RCU Option Delete Disk more settings of the same type to the storage system at the same time, the log - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 219
Remote Copy >Continuous Access Add Pair1 Delete Pair1 Suspend Pair1 Resume Pair1 Change Pair Option1 Delete Command Device Cnt Ac-S Z Delete Cmd.Dev RCU Operation Add RCU RCU you apply two or more settings of the same type to the storage system at the same time, the log information is output as - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 220
Remote Copy > Continuous Access Remote Command Device Cnt Ac-J Z Add Pair Cnt Ac-J Z Suspend Pair Cnt Ac-J Z Resume Pair Cnt Ac-J Z Delete Pair Cnt Ac-J Z Change Pair Option Cnt Ac-J Z Add Disk Controller (DKC) RCU Change Disk Controller (DKC) Option Delete Disk to the storage system at - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 221
Access Volumes Delete PAV Delete Alias* XRC Change XRC Option XRC Set XRC Option * When you apply two or more settings of the same type to the storage Log Output Description Function Name Setting on the Manual Plan tab Auto LUN Deleting on the Manual Plan tab Auto LUN Creating a plan on - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 222
Table 34 Other function (continued) GUI operation Submenu Cache Residency Audit Log Output Description Function Name Set Cache Residency (Open Volume) Perf Mon Set Cache Residency (M/F Volume) Perf Mon Release Cache Residency (Open Volume) Perf Mon Release Cache Residency (M/F Volume) Perf - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 223
Users Deleting a user account ACM Delete Users Create User Creating a new user account ACM Create User Edit User Changing settings of a user account ACM Edit User Remove Users Removing a user from a user group ACM Remove Users Change Password Changing a password ACM Change Password - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 224
40 Resource Management GUI encryption keys ENC Delete Keys Encryption Keys > Backup Keys Creating a backup of an encryption key ENC Backup Keys Encryption Keys > Restore keys Restoring encryption keys ENC Restore keys Table 42 Environmental Setting GUI operation Submenu Edit Storage - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 225
Partition Remote Web Console CLI Table 44 Using Remote Web Console CLI Remote Web Console CLI operations Audit Log Output Note Command Function Name Operation Name CFLSET Starts Operation Ends operation Spreadsheet CflSet Start CflSet End Logs of operations performed by CFLSET command - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 226
detailed information. Logout using the remote desktop access BASE Logout No parameters or detailed information. Rebooting SVP during the remote desktop BASE access Logout No parameters or detailed information. Powering SVP off during the remote desktop access BASE Logout No parameters or - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 227
button on SVP (continued) SVP Operations Function Maintenance Maintenance Operation Switch SVP Transfer Config Audit Log Output Function Name Maintenance Maintenance Operation Name Switch SVP Transfer Config Using Install button Table 48 Using Install button on SVP SVP Operations Function - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 228
button on SVP (continued) SVP Operations Function Copy Config Files Configuration Update Copy Config Files All Configuration Files Copy Config Files Create Configuration Backup Copy Prestaging Install M/F Cache Residency Install Open Cache Residency Install Install CV Install - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 229
) includes operations from Remote Web Console and SVP. This option downloads the audit log to the Remote Web Console computer. The Audit Log (DKC) includes commands sent from hosts or computers using RAID Manager. This option downloads the audit log to the Remote Web Console computer. Syslog window - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 230
operating system of your SVP is Windows XP. • To set an storage system that transfers the audit log to syslog servers, so that you can identify the storage SVP, the detailed information is always stored regardless of this setting. Download Syslog Downloads the syslog file to the Remote Web Console - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 231
address. However, only IPv4 address is available when the operating system of your SVP is Windows XP. • To set an IPv4 address, select IPv4. For IP, enter four is the same as that of Primary Server Setting. Set the User ID and Password to log in to the secondary FTP server. The restriction for - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 232
continued error condition, manually transfer the commands sent from the host, Enable is recommended. If you select Enable, make sure that a system disk is already created by a storage administrator. For how to create a system disk, see the HP StorageWorks P9000 Provisioning for Open Systems User Guide - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 233
Access Journal that supports mainframe volumes. P9000 or XP Continuous Access Synchronous software. The version of Continuous Access Synchronous that supports mainframe volumes. A volume in the disk array that accepts Continuous Access, Business Copy, or P9000 for Business Continuity Manager - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 234
, or both. The CLI configuration and replication tool for the P9000 or XP disk array that system administrators can use to enter RAID Manager commands from open-system hosts to perform Continuous Access, Business Copy, Database Validator, and Data Retention operations, as well as provisioning - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 235
source waits for data to be copied at the destination before acknowledging that it has been written at the source. Target volume. User Datagram Protocol. Coordinated Universal Time. Virtual Volume. Volume. Volume on disk. An accessible storage area on disk, either physical or virtual. Volume size - HP P9000 | HP StorageWorks P9000 Audit Log User and Reference Guide (AV400-96357 - Page 236
, 208 S storage capacity values conventions, 209 Subscriber's Choice, HP, 208 symbols in text, 210 T technical support HP, 208 service locator website, 208 text symbols, 210 typographic conventions, 209 W websites HP , 208 HP Subscriber's Choice for Business, 208 product manuals, 208 236
HP StorageWorks
P9000 Audit Log User and Reference Guide
Abstract
This guide describes the system logs generated by HP StorageWorks P9000 Remote Web Console and SVP operations. Topics
include how to view and redirect log output. The intended audience is a storage administrator or authorized service provider
with independent knowledge of HP StorageWorks P9000 disk arrays and HP StorageWorks P9000 software.
HP Part Number: AV400-96357
Published: May 2011
Edition: Fourth