HP P9000 HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400
HP P9000 Manual
View all HP P9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP P9000 manual content summary:
- HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 1
to remote HP StorageWorks P9000 disk arrays. Topics include configuring and managing remote copies using Remote Web Console, recovering from a disaster, troubleshooting, and using Continuous Access for data migration and point-in-time replication. The intended audience is a storage system - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 2
2010, 2011 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 3
groups 27 Host failover software...27 4 Sharing Continuous Access Synchronous volumes 29 Volume types that can be shared with Continuous Access Synchronous 29 Continuous Access Journal...30 Business Copy...31 Configurations with Business Copy P-VOLs 31 Configurations with Business Copy S-VOLs - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 4
RCU maintenance...60 Change minimum paths, round trip time, other RCU options 60 Add, delete SSIDs for an RCU 60 Delete Continuous Access Synchronous 61 Managing power-off for systems and network devices 61 General information...61 Planned outage of the primary system 62 Planned outage of the - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 5
...72 Troubleshooting using RAID Manager 73 Service Information Messages (SIMs 80 Pinned track recovery...80 11 Support and other resources 81 Contacting HP...81 Subscription service...81 Documentation feedback...81 Related information...81 HP websites...82 Conventions for storage capacity - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 6
Glossary 108 Index...110 6 Contents - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 7
of critical data in a remote location. This manual provides information and instructions for planning, configuring, creating, maintaining, monitoring, and troubleshooting a Continuous Access Synchronous system on P9500 storage systems. A Continuous Access Synchronous system creates and maintains - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 8
system. • Target, Initiator, and RCU target ports for the Fibre Channel. • Remote Web Console graphical user interface software, used to perform Continuous Access Synchronous configuration and pair operations. RAID Manager software may also be used for most pair operations, as well as disaster - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 9
:0x00 to 0xfe RCU:0x00 to 0xfe CAUTION: If you are creating a Continuous Access Synchronous pair with different series of storage systems (for example, P9500 and XP12000 Disk Array/XP10000 Disk Array) make sure that each storage system has a unique serial number. It is possible that a serial number - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 10
-attached to a separate Remote Web Console at the remote site. This allows you to perform operations more efficiently on the secondary system in the event that the main site is not available. • RAID Manager is a command line interface used to display pair information and perform all copying and pair - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 11
is recommended. Continuous Access Synchronous does not provide host-failover functions. Use the failover software most suitable for your platform and requirements (for example, Microsoft Cluster Server). Overview of initial, update copy operations When you perform the initial copy operation, all - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 12
than initial copy. However, if an initial copy is in progress when updates are sent by the host, the update copy must wait until the initial copy's copy pace completes. For example, if the copy pace is 15 tracks, the update copy may wait up to 15 tracks (1 cylinder). 12 Continuous Access Synchronous - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 13
60-07-51-xx/xx or later) XP12000/XP10000 Disk Array (50-09-98-xx/xx or later) Contact HP Technical Support for assistance. RAID levels supported Continuous Access Synchronous Continuous Access Synchronous supports RAID 1, RAID 5, and RAID 6 configurations. • Separate license codes are required for - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 14
be LAN-attached to a Remote Web Console computer. ◦ The secondary system should be attached using a separate LAN at the remote site. • RAID Manager ◦ Optional ◦ Command device required for each RAID Manager instance. See the HP StorageWorks P9000 RAID Manager User Guide for information on setting up - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 15
storage systems in a Continuous Access Synchronous pair relationship: • Remote Web Console must be LAN-attached to the primary and secondary systems. See the HP StorageWorks P9000 Remote Web Console User Guide to adequately support Continuous Access Synchronous remote copy workloads as well - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 16
HP representative for further information on XP12000 Disk Array/XP10000 Disk Array and XP24000/XP20000 Disk Array DKCMAIN program version. Planning for system performance Remote copy operations can affect I/O performance on the host and primary and secondary systems. Continuous Access Synchronous - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 17
OPEN-3). The P-VOL and S-VOL LU types are displayed in Remote Web Console. ◦ Multiplatform volumes (for example, 3390 3A/B/C) cannot be assigned to Continuous Access Synchronous pairs. Contact your HP account team for the latest information on supported devices for your platform. • Continuous Access - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 18
Remote Web Console Continuous Access Synchronous S-VOLs and P-VOLs are connected to the same host(s), HP strongly recommends that the S-VOLs are defined to remain offline to avoid this problem performed Managing differential data You will have the opportunity to specify how differential data is managed - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 19
10,019 cylinders, Track is set. Maximum number of pairs supported Continuous Access Synchronous supports a maximum of 32,768 pairs, which is the maximum number of pairs supported by the P9500 storage system. If RAID Manager is used, a command device must be defined. Therefore, the maximum number of - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 20
,752) If using OPEN-V and calculating the number of bitmap areas by using the number of cylinders displayed in Remote Web Console windows, then use this copy operations in cases where two sets of multiple initial copy operations are performed. An example is described in which four Continuous Access - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 21
pair for which initial copy is already instructed to be performed Continuous Access Synchronous pair for which initial copy is already instructed to be performed Continuous Access Synchronous pair for which initial copy is already instructed to be performed Continuous Access Synchronous pair for - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 22
required for your Continuous Access Synchronous system is based on the amount of I/O sent from the host to the primary volume. You determine required bandwidth by measuring write-workload. Workload data is collected using performance monitoring software. Consult your HP account team for more - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 23
best performance 3 km 1.5 km Your HP account team can provide the latest information on the availability of serial-channel Continuous Access Synchronous connections. Supported data path configurations Three Fibre Channel configurations are supported for Continuous Access Synchronous. LUN Manager - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 24
primary system for Continuous Access Synchronous operations. • Initiator port: Sends Continuous Access Synchronous commands to the paired storage system. Initiator ports must be configured on the primary system for Continuous Access Synchronous operations. When you want to copy data from secondary - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 25
and for performing specific operations at the same time on the pairs. • For information on creating pairs and assigning them to consistency groups using RAID Manager, see the HP StorageWorks P9000 RAID Manager User Guide. • With Remote Web Console, only one consistency group is supported. New pairs - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 26
Remote Web Console and RAID Manager users. • When a pair in consistency group 127 suspends for any reason, you can ensure that all P-VOLs in the group become suspended. • When the Continuous Access described above: • S-VOLs must be in PAIR or COPY status. They cannot be changed to PSUE status when in - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 27
the storage user command must be executed on the group and then the split can be performed. Host failover software Host failover software transfers information between host servers at the local and remote sites. It is a critical component of a disaster recovery solution. • When Continuous Access - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 28
Continuous Access Synchronous does not provide host-failover functions. Use the failover software most suitable for your platform and requirements (for example, Microsoft Cluster Server). 28 Planning for Continuous Access Synchronous - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 29
Continuous Access Synchronous Volume type Used as P-VOL? Used as S-VOL? LUN Expansion (LUSE) LUSE Volume Yes Yes Business Copy (BC) P-VOL in PSUS (Delete pair to RCU) status Yes Yes P-VOL in COPY No No Reserved volume No No Snapshot (SS) P-VOL in COPY(RS-R) status No No SS P- - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 30
Auto LUN, contact HP Technical Support. 2 The volume cannot be used if the corresponding Cnt Ac-J pair belongs to a JNL group with P9500 mode 707 set to ON. 3 The volume can be used only when you resynchronize a Continuous Access Synchronous pair or perform a RAID Manager horctakeover operation. In - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 31
be assigned to Business Copy pairs. Sharing Continuous Access Synchronous and Business Copy volumes provides multiple copies of data at the local and/or remote sites. For information about Business Copy, see the HP StorageWorks P9000 Business Copy User Guide. NOTE: Business Copy is recommended for - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 32
in the host command. Remote Web Console displays the status of all S-VOLs associated with a Business Copy P-VOL. Table 11 Pair status reporting Number of Cnt Number of BC S-VOLs Pair status Ac-S pairs 0 0 SMPL 0 1 Business Copy pair status 32 Sharing Continuous Access Synchronous volumes - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 33
Open Systems User Guide. Cache Residency Cache Residency volumes can be assigned to Continuous Access Synchronous pairs, and Cache Residency operations can be performed on Continuous Access Synchronous P-VOLs and S-VOLs. For more information, see the HP StorageWorks P9000 Cache Manager User Guide - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 34
. For more information on LUN Manager, see the HP StorageWorks P9000 Provisioning for Open Systems User Guide. Thin Provisioning A Thin Provisioning virtual volume (V-VOL) can be assigned to Continuous Access Synchronous pairs. • You can use V-VOLs that are used by a Business Copy pair or a that are - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 35
completed, exit Continuous Access Synchronous and Remote Web Console. 5. Re-enable Performance Monitor data collection. For further information on Performance Monitor, see the HP StorageWorks P9000 Performance for Open and Mainframe Systems User Guide. Auto LUN Continuous Access Synchronous volumes - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 36
of DRU operation Continuous Access Synchronous volume Pair status Changing access attribute P-VOL SMPL Yes COPY Yes PAIR Yes PSUS Yes PSUE Yes S-VOL SMPL Yes COPY No PAIR No PSUS No* PSUE No * If the S-VOL Write option is enabled, the access attribute can be changed - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 37
for information on target, initiator, and RCU target ports. Procedure 1 To define port attributes 1. On the menu bar, click Actions > Remote Copy > Continuous Access Synchronous > RCU Operation. The RCU Operation window opens. 2. Change to Modify mode by clicking the icon. Configuration workflow 37 - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 38
to the primary system. This prepares both systems for Continuous Access Synchronous commands and operations. During the procedure, logical paths will also be set up between the systems. Prerequisite information • This procedure is performed on the primary system. • The primary and secondary systems - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 39
Remote Copy > Continuous Access Synchronous > RCU Operation. The RCU Operation window opens. 2. Change to Modify mode by clicking the icon. 3. In the Display box, select MCU&RCU. The tree displays CUs for the accessed . • When specific CU is selected Configure storage systems, define logical paths 39 - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 40
• When CU Free is selected 6. In the RCU S/N box, enter the remote CU's 5-digit serial number. 40 Configuration operations - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 41
5 (XP24000/XP20000 Disk Array), you can select a CU number from 00 to FE. • When the specified controller ID is 4 (XP12000 Disk Array/XP10000 Disk Array), you can select primary system split Continuous Access Synchronous pairs. This is done to prevent a performance drop on the host because of low - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 42
pace used for response time calculation Interface Initial Copy Only in Progress RAID Manager User-specified value Remote Web Console User-specified value Initial, Update Copy in Progress When Initial Copy Pace specified When Initial Copy Pace specified at the Time of Pair Creation is 1 at - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 43
• Please review the path-related prerequisites in "Configure storage systems, define logical paths" (page 38). Procedure 2 To configure additional logical paths 1. On the menu bar, click Actions > Remote Copy > Continuous Access Synchronous > RCU Operation. The RCU Operation window opens. 2. Change - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 44
lowercase. 7. When you have entered the desired logical paths, click Set. 8. Review changes in the Preview list. To make a change, right-click it in the the menu bar, click Actions > Remote Copy > Continuous Access Synchronous > System Option. The System Option window opens. 2. Change to Modify mode - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 45
. Using the default limits the impact on performance. • When you specify more than 64, the system starts copying in the first 64 pairs but does not copies (for selected CU) 1. On the menu bar, click Actions > Remote Copy > Continuous Access Synchronous > System Option. The System Option window opens - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 46
the HP StorageWorks P9000 External Storage Access Manager User Guide for information. Prerequisite information The following information is provided to help you prepare for the Paircreate operation: • The initial copy is performed from the primary system. • S-VOLs must be offline to all hosts. • You - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 47
performance outweighs data recovery. "Never" ensures that the P-VOL remains available to applications for updates, even if all Continuous Access Synchronous copy copies 1. On the menu bar, click Actions > Remote Copy > Continuous Access Synchronous > Pair Operation. The Pair Operation window opens. - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 48
an explanation of the options, see "Change fence level" (page 51). 9. In the Initial Copy list, select one of the following: • Entire Volume: to create the Continuous Access Synchronous pair relationship and copy the data from primary to secondary volumes immediately. (Default) • None: to create the - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 49
On the menu bar, click Actions > Remote Copy > Continuous Access Synchronous > Pair Operation. The Pair Operation window opens. 2. Change to Modify mode by clicking pairs While a Continuous Access Synchronous pair is split, the primary system does not perform update copy operations to the - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 50
HP StorageWorks P9000 External Storage Access Manager User Guide. Procedure 7 To resynchronize a pair 1. On the menu bar, click Actions > Remote Copy > Continuous Access Synchronous > Pair Operation. The Pair Operation window opens system performs the next Continuous Access Synchronous operation - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 51
pair options such as difference management cannot be changed unless you release and recreate the pair. Procedure 9 To change the fence level 1. On the menu bar, click Actions > Remote Copy > Continuous Access Synchronous > Pair Operation. The Pair Operation window opens. 2. Change to Modify mode by - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 52
status 1. On the menu bar, click Actions > Remote Copy > Continuous Access Synchronous > Pair Operation. The Pair Operation window opens. 2. Locate the pair volume with the status you want to review. Review pair status in the Status column. You can view more details by right-clicking and selecting - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 53
P-VOL This volume is not currently assigned to a Continuous Read/write Access Synchronous pair. The initial copy operation for this pair is in progress. Read/write This pair is not yet synchronized. • The pair is synchronized Read/write • Updates from the host to the P-VOL are duplicated in the - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 54
discusses pairs that are split by the user (PSUS), and pairs that are suspended by the system (PSUE). • You can split a pair when the initial copy operation is complete. ◦ You must split a pair must be to perform media maintenance on the P-VOL or to access the S-VOL (when S-VOL write is enabled - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 55
data setting (16) Copy priority (18) Quorum disk ID (20) CLPR number and name • A device ID ending in # (for example, 00:00:3C #) indicates the LDEV is an external volume. For more information, see the HP StorageWorks P9000 External Storage for Open and Mainframe Systems User Guide. • A device ID - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 56
" (page 58) Start and stop monitoring in Performance Monitor. See the HP StorageWorks P9000 Performance for Open and Mainframe Systems User Guide for instructions. In Remote Web Console, click Actions > Remote Copy > Continuous Access Synchronous > Usage Monitor. Fields are described below. Table - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 57
the HP StorageWorks P9000 External Storage for Open and Mainframe Systems User Guide. ◦ A device ID ending in X (e.g., 00:00:3C X) indicates the LDEV is a Thin Provisioning virtual volume. For more information, see the HP StorageWorks P9000 Provisioning for Open Systems User Guide. • Volume, to view - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 58
Performance Monitor Export Tool. Monitor, maintain logical paths Check logical path status to keep track of and maintain paths. Procedure 13 To monitor logical path status 1. On the menu bar, click Actions > Remote Copy > Continuous Access Synchronous > RCU Operation. The RCU Operation window opens - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 59
secondary side does not support the fibre remote copy function, or the specified Actions > Remote Copy > Continuous Access Synchronous > RCU Operation. The RCU Operation window opens. 2. command, or click Cancel. 7. When satisfied, click Apply. This saves the configuration to the Continuous Access - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 60
"Configure storage systems, define logical paths" (page 38). Add, delete SSIDs for an RCU Before adding an SSID (storage system identifier 1. On the menu bar, click Actions→Remote Copy→Continuous Access Synchronous→RCU Operation The RCU Operation window opens. 2. Change to Modify mode by clicking - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 61
is advisable to check with your HP representative or HP Technical Support for assistance. The following sections provide instructions for performing planned outages when Continuous Access Synchronous is present. General information Please review the following system behaviors regarding powering off - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 62
Continuous Access Synchronous pairs are suspended, differential data is retained to SSD. In this unlikely case, MCU copies differential extender). Procedure 19 To perform a planned outage of a Continuous Access Synchronous secondary system or data path component 1. Identify the Continuous Access - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 63
Media maintenance A pair must be suspended before performing media maintenance on the P-VOL. Write operations to the P-VOL that specify normal authorization are duplicated on the S-VOL. Write operations with diagnostic or device support authorization are completed at the P-VOL only. Miscellaneous - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 64
nondisruptively. To support this, data migration must be managed through an integrated operation using RAID Manager, Continuous Access Synchronous, and HA software functions. If you need to migrate data from other vendors' storage systems to a P9500 system, contact your HP account team. Procedure - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 65
instructions for using Continuous Access RAID Manager or SNMP). This should also be done at the secondary site if a host is connected to it. Remote copy and disaster recovery procedures are inherently complex. Consult your HP account of lost updates is performed after the application has been started - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 66
Perform file recovery as needed. 4. At the secondary site, connect to each remote system and release all Continuous Access and restarted using Entire Volume for Initial Copy option. If you are sure that no of the Detailed Information dialog box (MCU SVP time) will help to determine the last time this - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 67
since the paired S-VOLs are in the SMPL state at the secondary site. 3. At the local site, delete the Continuous Access Synchronous association with the secondary systems (Delete RCU). In Remote Web Console, connect to each primary system and each CU to make sure that all RCUs are deleted. 4. At the - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 68
consistency groups and create the Continuous Access Synchronous pairs in the original direction. You may use the "none" initial copy option because all P-VOLs the Entire Volume initial copy option to be safe. 13. Vary the primary system and P-VOLs online, and start the host operations. 68 Planning - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 69
from being completed. Retry the operation when the system has a lighter workload. • A communication error may have occurred between the Remote Web Console computer and SVP. See the HP StorageWorks P9000 Remote Web Console User Guide for information and instructions. General troubleshooting 69 - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 70
Switch, then enable again. For more information on Monitoring Switch, see the HP StorageWorks P9000 Performance for Open and Mainframe Systems User Guide. Table 25 Troubleshooting secondary path status problems Path status Initialization Failed Description The link initialization procedure to the - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 71
Table 25 Troubleshooting secondary path status problems (continued) Path status Invalid Port Mode Description The microcode on the remote Install the microcode that supports the fibre remote copy system does not support the function on the remote system. fibre remote copy function. A timeout error - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 72
the error and provides a part code and error code. The error message may also include a P9500 error code. You may need to call HP Technical Support for assistance. Report the error code(s). See the HP StorageWorks P9000 Remote Web Console Messages for a list of the error codes. 72 Troubleshooting - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 73
resynchronizes differential data when the S-VOL is swapped for the P-VOL). The pair cannot be created because the remote system path setting in Remote Web Console is invalid. The pair cannot be created because Continuous Access Asynchronous is not supported. Troubleshooting using RAID Manager 73 - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 74
Table 27 RAID Manager error codes for Continuous Access Synchronous (SSB1 is B901/B90A/B90B/B912/D004) (continued) Error code (SSB2) Description B9BD B9C0 C162 C184 C189 C18A C194 C195 C198 C199 C1BE C211 C212 C214 C215 C218 C21A C21C C22A C22C C22D - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 75
. The P-VOL is in process of drive copy for an SVP request. The P-VOL is terminating the copy task. The P-VOL is in process of collection copy. The P-VOL is in process of collection access. The P-VOL is blocked. The P-VOL is blocked and impossible to access. Troubleshooting using RAID Manager 75 - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 76
of Business Copy, Reserved volume of Auto LUN, or the volume of Continuous Access Journal pair. C33A C33B C33C C33E C33F C35C C370 C371 A request for a Paircreate operation was received. The command was rejected because the secondary system is a not supported by Continuous Access Synchronous - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 77
is not supported by Continuous Access Synchronous. The number of paths is smaller than the required minimum number of paths. The True Copy P-VOL is a Business Copy volume. The True Copy S-VOL is a Business Copy volume. A request for a Paircreate operation was received. The command was rejected - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 78
S-VOL, or the path between primary system and secondary system is in the BUSY status. The Continuous Access Synchronous S-VOL is a Business Copy volume. The DKC type of the secondary system is not supported by Continuous Access Synchronous. The SSID or CU number of the specified secondary system is - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 79
because the specified S-VOL was a Continuous Access Journal S-VOL or journal volume. A request for a Paircreate was received. The command was rejected because the specified P-VOL was already created as a Continuous Access Journal pair for differential resync. Troubleshooting using RAID Manager 79 - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 80
information on SNMP operations, see the HP StorageWorks P9000 Remote Web Console User Guide, or contact your HP account team. For further information on the SIMs, see the HP StorageWorks P9000 Remote Web Console User Guide, or call the HP Technical Support for assistance. Pinned track recovery To - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 81
information: • HP StorageWorks P9000 Business Copy User Guide • HP StorageWorks P9000 Cache Manager User Guide • HP StorageWorks P9000 Cache Partition User Guide • HP StorageWorks P9000 Continuous Access Journal for Mainframe Systems User Guide • HP StorageWorks P9000 External Storage for Open and - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 82
, see the following HP websites: • http://www.hp.com • http://www.hp.com/go/storage • http://www.hp.com/service_locator • http://www.hp.com/support/manuals • http://www.hp.com/support/downloads • http://www.hp.com/storage/whitepapers Conventions for storage capacity values P9000 disk arrays use the - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 83
continued) Convention Monospace text Element • File and directory names • System output • Code • Commands, their arguments, and argument values Monospace, italic text • Code variables • Command : Provides clarifying information or specific instructions. NOTE: Provides additional information. - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 84
fields, and behaviors in Remote Web Console. Continuous Access Synchronous windows Continuous Access Synchronous information and pair operations are seen and initiated in the following GUI windows: • Pair Operation • RCU Operation • Usage Monitor • History • System Option Menu commands for the pair - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 85
the Remote Copy Monitoring function. Used to view and export the operation history of the pairs. System Option window System Option Used to change the storage system options. CU Option Used to change the CU Options. Pair Operation window This window lets you view Continuous Access Synchronous - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 86
The LU path (a path from a host to a volume) information appears on the right of the icon as follows: Key: 1 The port number of the local volume 2 The host group number 3 The LUN 4 The LDKC, CU, and LDEV number The icons are: : SMPL : P-VOL : S-VOL 86 Continuous Access Synchronous GUI reference - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 87
of the specified volume. Quorum Disk ID VOL Access CLPR Used Volume Quorum disk ID number assigned to the ESAM pair. Access status of the quorum disk. The CLPR number and name for the pair volumes. See the HP StorageWorks P9000 Cache Partition User Guide for more information on CLPR. Displays - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 88
view details for a selected Continuous Access logical partition number and name. Group Name Local volume's host group Disk Array is the model name. • 4 is the controller ID and XP12000 Disk Array/XP10000 Disk Array is the model name. MCU-RCU Path Data path channel type. 88 Continuous Access - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 89
Order in which initial copy/resynchronizing operations are performed on multiple pairs. This field displays only when the P-VOL is selected. It is disabled when the status becomes PAIR. P-VOL Fence Level S-VOL Write Paired Time Quorum Disk ID Last Update Time VOL Access Pair Copy Time The P-VOL - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 90
of the initial copy for which the Priority is set, see "Priority set for initial copy operations and scheduling order" (page 20). Difference Management Where the method is defined for managing differential data. Options are Auto, Cylinder, Track. 90 Continuous Access Synchronous GUI reference - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 91
Pairsplit-r dialog box This dialog box lets you split a pair. See "Split pairs" (page 48) for complete information. Item Volume S-VOL Write Suspend Kind Description Shows the selected volume's port, GID, LUN (LDKC number, CU number, LDEV number). Where the option is defined that allows write I/O - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 92
P-VOL. Where maximum number of tracks to be copied is defined: 1-15. Where the order is defined for the current pair to be created. Options are from 1 to 256. Whether a Continuous Access Synchronous pair is resynchronized as an ESAM pair Select the quorum disk ID to use for the ESAM pair. Pairsplit - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 93
. • When GID is selected, the group and port settings are not available. Item Description Port Select the port. GID Select the GID (host group identification number). CU Select the CU. Type Select the pair type: synchronous, synchronous-C, ESAM, or all types. Display Filter dialog box - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 94
this time). CLPR Select the CLPR (cache logical partition). Internal/External VOL Select the volume type, internal or external, or all types. Quorum Disk ID Select the quorum disk ID. VOL Access Select the access status of the quorum disk. Status Displays only volumes that have the selected - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 95
(page 58) • View the following: ◦ Information related to Continuous Access Synchronous storage systems: "RCU Operations and actual CU numbers) for the storage system that you accessed in Remote Web Console. The paired system or systems the current operation performed on the RCU Operation window. - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 96
MCU or RCU. This depends on whether the system and CU you accessed in Remote Web Console is a primary or secondary system. For example, if you accessed a primary system (MCU), then Type will show RCU, a secondary is blank when the local CU is an MCU. 96 Continuous Access Synchronous GUI reference - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 97
in the Display box. Item Port Attribute Description Cluster and port number (CL1-A-CLG-M) The port type assigned to the port: Initiator, target, RCU target, External, Initiator/External RCU Operation window 97 - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 98
RCU Status dialog box • When a specific CU is selected • When CU Free is selected 98 Continuous Access Synchronous GUI reference - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 99
This dialog box lets you view status and other information for the selected RCU. Right-click displayed. Type of path. Minimum number of MCU-RCU paths for the selected RCU. Time value for the remote I/O (RIO) missing interrupt handler (MIH), which is the wait time for data transfer from the primary to - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 100
check box. By default, the check box is not selected. Add RCU dialog box • When a specific CU is selected • When CU Free is selected 100 Continuous Access Synchronous GUI reference - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 101
lets you link two storage systems for creating Continuous Access Synchronous pairs. See "Configure storage systems, define logical paths" (page 38) for complete information. Item RCU S/N LDKC Controller ID Logical Adr. (RCU CU) SSID Path Gr. ID MCU-RCU Path Description Remote system's CU serial - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 102
Trip Time options. See "Configure storage systems, define logical paths" time is defined in which the copy operation must complete, otherwise the remote systems. Where local system initiator port is defined. Where remote system initiator port is defined. Add SSID dialog box 102 Continuous Access - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 103
: Monitoring is on. Graph displays. • Disable: Monitoring is off. Graph is disabled. The data collection interval. The most recent data sample time on the graph. Remote I/O statistics and status of remote copy monitor. Usage Monitor window 103 - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 104
History window This window lets you view the history of operations performed on pairs, and the data associated with each operation. Information about field behavior is there is no history file, nothing appears. Saves operation history in a CSV file. 104 Continuous Access Synchronous GUI reference - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 105
operations on pairs in the connected storage system. The list consists of Suspend Operation : Pair split operation was performed. ◦ Pair Suspend (Failure) : and LDEV number of the paired volume. • Copy Time : Amount of time for the operation the Remote Web Console main window. Export operations history This - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 106
of volumes to be copied concurrently, path watch time" (page 44) When you change settings in the System Operation window, the Preview list shows the changes. Here, the changes have not been applied to the storage system. Click Apply to save changes. 106 Continuous Access Synchronous GUI reference - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 107
Field Operation Preview Description Indicates the operation that will occur when you click Apply. • Change System Option: Change storage system options. • Change SIM Report: Change whether to report SIMs to hosts. • Blank: Nothing will occur when you click Apply. The number to the left of the slash - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 108
. P9000 or XP Continuous Access Journal software. P9000 or XP Continuous Access Synchronous software. The version of Continuous Access Synchronous that supports mainframe volumes. A volume in the disk array that accepts Continuous Access, Business Copy, or P9000 for Business Continuity Manager - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 109
, or both. The CLI configuration and replication tool for the P9000 or XP disk array that system administrators can use to enter RAID Manager commands from open-system hosts to perform Continuous Access, Business Copy, Database Validator, and Data Retention operations, as well as provisioning - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 110
disk arrays supported models, 7 Display Filter dialog box , 93 document conventions, 82 related information, 81 documentation HP website, 81 providing feedback, 81 E error codes, 72 exporting history of pair operations, 105 exporting pair information, 55 external port, 25 F failover software about - HP P9000 | HP StorageWorks P9000 Continuous Access Synchronous User Guide (AV400 - Page 111
, troubleshooting, 72 switching operations to remote site, 65 symbols in text, 83 System Option window, 106 system requirements, 13 T target port, 24 technical support HP, 81 service locator website, 82 text symbols, 83 transfer operations to local site, 67 typographic conventions, 82 U update copy
HP StorageWorks
P9000 Continuous Access Synchronous User
Guide
Abstract
This guide explains how to use HP StorageWorks XP P9000 Continuous Access Synchronous Software to protect information
stored on HP StorageWorks P9000 disk arrays from local disaster by continuously copying local data across Fibre Channel
connections to remote HP StorageWorks P9000 disk arrays. Topics include configuring and managing remote copies using
Remote Web Console, recovering from a disaster, troubleshooting, and using Continuous Access for data migration and
point-in-time replication. The intended audience is a storage system administrator or authorized service provider with independent
knowledge of HP StorageWorks P9000 disk arrays and Remote Web Console.
HP Part Number: AV400-96374
Published: May 2011
Edition: Fourth