HP Photosmart 140 HP Photosmart 140 series - (English) Setup Guide
HP Photosmart 140 Manual
View all HP Photosmart 140 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Photosmart 140 manual content summary:
- HP Photosmart 140 | HP Photosmart 140 series - (English) Setup Guide - Page 1
setup guide hp photosmart 140 series 1 unpack your printer HP #57 *Q3025-90153* Q3025-90153 2 plug in the power cord Place the printer at least 10 inches (250 mm) away from any obstruction to allow space for the paper to move through the printer during printing. 1. Connect the power cord to the - HP Photosmart 140 | HP Photosmart 140 series - (English) Setup Guide - Page 2
printer. The memory card light flashes while the printer reads the memory card. 4. Press the CANCEL button to cancel printing a photo index page. 5. When Select:#1 appears on the printer's LCD screen, press the PRINT button to print your first photo. need more help? ? www.hp.com/support Memory card
hp
photosmart
140 series
1
unpack your printer
2
plug in the power cord
Place the printer at least 10 inches (250 mm)
away from any obstruction to allow space for the
paper to move through the printer during printing.
1.
Connect the power cord to the back of your
printer.
2.
Plug the power cord into a working electrical
outlet.
Important:
Make sure the power cord does not
block the rear paper path.
3
load an index card
Note:
The index card will be used to print a
calibration page in step 6.
1.
Open the paper tray door.
2.
Place an index card from the sample pack on
the paper tray and slide the card underneath
the output guide.
3.
Move the paper width guide to fit close to the
left edge of the index card without bending
the card.
setup
guide
Q3025-90153
HP #57
Output guide
Paper width guide
Paper tray
Rear paper path
*Q3025-90153*