HP Photosmart C7100 Setup Guide
HP Photosmart C7100 - All-in-One Printer Manual
 |
View all HP Photosmart C7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Photosmart C7100 manual content summary:
- HP Photosmart C7100 | Setup Guide - Page 1
or wired network users: you must follow the instructions in this setup guide to be successful adding the HP All-in-One to your network. USB cable b Lift the control panel. 3 Locate components HP Photosmart C7100 All-in-One series Basics Guide Windows CD Basics Guide 4 x 6 in (10 x 15 cm - HP Photosmart C7100 | Setup Guide - Page 2
tab is towards you. d Lower the output tray and push in the photo tray. e Pull out the tray extender and lift up the paper catch. 2 • HP All-in-One - HP Photosmart C7100 | Setup Guide - Page 3
phone port labelled 1-LINE and the other to a wall jack. See the Basics Guide if you want to use your own phone cord or for help with other the power cord USB cable users: Do not connect the USB cable until instructed later in this guide. 9 Press the On button After you press the On button, wait - HP Photosmart C7100 | Setup Guide - Page 4
with the printer. The ink in these cartridges is specially formulated to mix with the ink in the print head assembly at first-time setup. c 4 • HP All-in-One - HP Photosmart C7100 | Setup Guide - Page 5
takes approximately 5 minutes. CAUTION: Do not disconnect or turn off the b HP All-in-One during this time. You may hear the device making noises. alignment page. 14 Connect the HP All-in-One Continue to the next page for instructions on connecting your HP All-in-One to your computer or to - HP Photosmart C7100 | Setup Guide - Page 6
7) for instructions. B: Ethernet (Wired) Network Use this connection type if you want an Ethernet cable connection between the HP All-in-One between the HP All-in-One and your network. Equipment needed: wireless router*. For a wireless connection, go to Section C1 (page 11) for instructions. *Note: - HP Photosmart C7100 | Setup Guide - Page 7
a Turn on your computer, login if necessary, and then wait for the desktop to appear. b Locate the HP All-in-One Mac CD. c Continue to the next page. c Follow the onscreen instructions to install the software. d On the Connection Type screen, make sure to select directly to this computer. Continue - HP Photosmart C7100 | Setup Guide - Page 8
your computer to the USB port on the back of the device. b Double-click the HP All-in-One Installer icon. c Make sure you complete all screens, including the Setup Assistant. b Follow the onscreen instructions to complete the software installation. A3 Congratulations! Go to Step 18 of this Setup - HP Photosmart C7100 | Setup Guide - Page 9
the Ethernet port on the back of the device. d Connect the other end of the Ethernet cable to the router. IMPORTANT: Your computer and the HP All-in-One must be on the same active, working network. c If you are using a DSL or cable modem, make sure you do not connect - HP Photosmart C7100 | Setup Guide - Page 10
screen, make sure to select through the network. Follow the onscreen instructions. b Insert the HP All-in-One Mac CD. c Double-click the HP All-in-One installer icon. e Your firewall software may provide prompts step 14. B3 Congratulations! Go to Step 16 of this Setup Guide 10 • HP All-in-One - HP Photosmart C7100 | Setup Guide - Page 11
Option A: SecureEasySetup Requirements: You must have a wireless router that supports SecureEasySetup. IMPORTANT: Use this method only if you have previously used go to step C3. If you have problems connecting to the network, see the Basics Guide for additional setup information. HP All-in-One • 11 - HP Photosmart C7100 | Setup Guide - Page 12
appear in the list, you can enter it manually. Press to highlight Enter New Network Name ( WPA passphrase is not accepted, refer to Network Troubleshooting on page 15. Note: If your router HP Photosmart C7100 All-in-One series Basics Guide If you have problems connecting to the network, see the - HP Photosmart C7100 | Setup Guide - Page 13
Type screen, make sure to select through the network. Follow the onscreen instructions. b Insert the HP All-in-One Mac CD. c Double-click the HP All-in-One installer icon. e Your firewall software may provide promts step 14. C4 Congratulations! Go to Step 16 of this Setup Guide HP All-in-One • 13 - HP Photosmart C7100 | Setup Guide - Page 14
for each installation. Follow the onscreen instructions. Make sure that you choose the connection types between the network and your HP All-in-One (not between your computer and the network). 17 Congratulations! Go to Step 18 of this Setup Guide Troubleshooting Problem: A Paper Jam message appears - HP Photosmart C7100 | Setup Guide - Page 15
Troubleshooting ? Problem: You are not sure if your network is set up properly. Action: For information on how to set up a network, go to www.hp.com/support. Enter Photosmart C7100, and then search for Network Setup. Problem User Guide for more details and troubleshooting information. Problem: - HP Photosmart C7100 | Setup Guide - Page 16
camera into the appropriate memory card slot and press the Photosmart Express button. The Photosmart Express menu appears on the color graphics display. b and other features, see the User Guide and online help. For additional help, see www.hp.com/support. © Copyright 2006 Hewlett-Packard
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
1
2
3
*May need to be purchased
separately.
*
*
Basics Guide
HP Photosmart C7100 All-in-One series
a
b
Start Here
Remove all tape and lift display
Locate components
HP Photosmart C7100 All-in-One series Setup Guide
a
Remove all tape from the front, back,
and both sides of the device. Remove the
protective film from the color graphics
display.
b
Lift the control panel.
The contents of your box
may differ.
4 x 6 in
(10 x 15 cm) photo paper
Mac CD
Windows CD
Basics Guide
control panel faceplate
(may be pre-attached)
ink cartridges
power cord
phone cord
Documentation CD
This CD may be
included for some
languages where help
is not available through
the software.
USB cable users: Do not connect the USB cable until step A2.
Wireless or wired network users: you must follow the instructions in this setup guide
to be successful adding the HP All-in-One to your network.
Important setup information
USB cable
Ethernet cable