HP Photosmart c20/c30 HP PhotoSmart C20 and C30 Digital Camera - Quick Start P

1 Get ready

±

Load the batteries.

±

Set the date and time on

your camera:

1.

Make sure the lens cover is closed (the camera

is off).

2.

Press the

photo LCD on/off

button to turn the

photo LCD on. The

Set Date & Time

menu

option appears on the photo LCD.

3.

Use the arrow buttons to select the day (date)

of the month, then press

OK

. Select the month,

year, hour, minutes, and AM or PM.

4.

Use the arrow buttons to select

Yes

to confirm

the date and time, then press

OK

.

3 Review your photos

Use the photo LCD to review your photos before you

download them to your PC.

1.

Close the lens cover to turn the camera off.

2.

Press the

photo LCD on/off

button to turn the

photo LCD on. Use the arrow buttons to sequence

through your photos.

Note:

You can also use your television to review

photos. See the Basics guide for details.

3.

When you²re done reviewing your photos,

remember to turn the photo LCD off.

Taking your first picture with the

HP PhotoSmart C30 Digital Camera

2 Take some photos

1.

Open the lens cover to turn the camera on. The lens

cover is the on/off switch for the camera.

2.

Look through the viewfinder and frame your

subject.

3.

Press the

shutter release

button 1/2 way. When you

see the green light in the viewfinder, press the

button all the way down. The camera will beep to

let you know the picture has been taken.

Now you±re ready to download your photos into your

computer. See reverse for more information.

4 Install the photo finishing software

1.

Place the HP PhotoSmart Photo Finishing Software

CD into your computer²s CD-ROM drive.

2.

Follow the instructions on the screen to complete

the software installation.

5 Connect the camera to the computer

1.

Close the lens cover to turn the camera off.

2.

Plug the large end of the PC connection cable

into the PC serial port.

3.

Plug the small end of the cable into the camera.

4.

Open the lens cover to turn the camera on.

When you connect the camera to the computer, the

HP PhotoSmart photo finishing software starts and

begins displaying your photos in the Select view. Note

that the photos are not yet saved on your computer²s

hard drive³you save them in the Save view.

photo

LCD

photo LCD

on/off button

arrow

buttons

shutter

release

button

This information will get you started with your new digital camera. If you need more detailed instructions, see the Basics guide.