HP ProDesk 400 G3 Micro User Guide

HP ProDesk 400 G3 Micro Manual

Get HP ProDesk 400 G3 Micro PDF manuals and user guides View all HP ProDesk 400 G3 Micro manuals
Add to My Manuals
Save this manual to your list of manuals

HP ProDesk 400 G3 Micro manual content summary:

  • HP ProDesk 400 G3 Micro | User Guide - Page 1
    User Guide
  • HP ProDesk 400 G3 Micro | User Guide - Page 2
    © Copyright 2017 HP Development Company, L.P. Windows is either a registered trademark or trademark HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall
  • HP ProDesk 400 G3 Micro | User Guide - Page 3
    operating system Recovery image 6 4 Using the Optane memory application ...8 Initialization errors ...8 Statistics page ...8 5 Using Intel Optane memory with the Intel Rapid Storage Technology driver 9 Enabling Intel Optane memory ...9 Disabling Intel Optane memory ...9 6 Troubleshooting ...10 iii
  • HP ProDesk 400 G3 Micro | User Guide - Page 4
    iv
  • HP ProDesk 400 G3 Micro | User Guide - Page 5
    to www.intel.com/support/optane-memory. Warnings & Comfort Guide. It describes proper workstation setup, Guide also provides important electrical and mechanical safety information. This guide is located at http://www.hp HP accessories are for use in HP computer after installing the product. HP is not liable for any
  • HP ProDesk 400 G3 Micro | User Guide - Page 6
    10 64-bit installed, formatted for the GUID partition table (GPT), and at least 5 MB of continuous, unallocated space at the end of the boot volume ● HP BIOS Version 02.06 or newer NOTE: To locate the latest BIOS for your product, go to http://www.hp.com/support. ● BIOS configured for Optane ● The
  • HP ProDesk 400 G3 Micro | User Guide - Page 7
    help preparing your computer model for this installation, refer to the documentation provided with the computer, or go to http://www.hp.com/support to locate the manual for your model. Models with M.2 connectors NOTE: If there are two M.2 connectors on the system board, install the memory module in
  • HP ProDesk 400 G3 Micro | User Guide - Page 8
    4. Rotate the module downward (2), and then install the screw (3). Models without M.2 connectors Install the module into a PCIe carrier card, and then install the carrier card in the x4 expansion slot. IMPORTANT: Do not install the carrier card into the x16 expansion slot. 1. Install the module into
  • HP ProDesk 400 G3 Micro | User Guide - Page 9
    2. Insert the PCIe carrier card into the computer expansion slot (1), and then install the screw into the carrier card bracket (2). Models without M.2 connectors 5
  • HP ProDesk 400 G3 Micro | User Guide - Page 10
    update to Version 02.06 or later before the Intel Optane memory and software driver package can be installed. To locate the latest BIOS for your product, go to www.hp.com/ support, and follow the on-screen instructions to find your product and locate downloads. To enable Intel Optane in the Setup
  • HP ProDesk 400 G3 Micro | User Guide - Page 11
    ● Windows 10 Spring 2017 Creator's Update (1703) ● Intel Rapid Storage Technology software and driver, Version 15.5 or later, available from www.hp.com/ support ● USB flash drive for installation To install the driver: 1. Create a bootable USB flash drive from the Windows 10 operating system image
  • HP ProDesk 400 G3 Micro | User Guide - Page 12
    4 Using the Optane memory application Initialization errors You can open the application by selecting Intel Optane Memory on the Start menu. This section includes examples of errors that could occur if your computer is not ready to enable Intel Optane memory. Error Your System is Intel Optane
  • HP ProDesk 400 G3 Micro | User Guide - Page 13
    . To disable Intel Optane memory using the Intel Rapid Storage Technology application: IMPORTANT: Do not remove the Intel Rapid Storage Technology driver after disabling Intel Optane memory. 1. Open the Intel Rapid Storage Technology application, and then click the Intel Optane memory tab. 2. Click
  • HP ProDesk 400 G3 Micro | User Guide - Page 14
    6 Troubleshooting This section includes examples of errors that could occur during installation of the Intel Optane memory software and driver. For more information and help on these errors, please contact support at www.hp.com/ support. Error Cause and solution Unsupported CPU Intel Optane
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
User Guide