HP ProLiant 2500 Compaq ProLiant 2500 Family of Servers Maintenance and Servic - Page 111
SW1 - System Maintenance Switch, System Maintenance Switch Settings - SW1
View all HP ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
4-2 Switch and Jumper Information SW1 - System Maintenance Switch The following table defines the function for each switch setting of SW1. The default positions are indicated below. Table 4-1 System Maintenance Switch Settings - SW1 Switch Function 1 Integrated Video Disable 2 Configuration Lock 3 Rack Mount Mode 4 Diskette Boot Feature Enable 5 Power-On Password Defeat 6 Configuration Memory Clear Set to ON Disables the integrated video controller. Disables configuration changes. Default for Compaq ProLiant 2500R. System is installed in a rack chassis. Enables system booting from the diskette drive regardless of the configuration setting. Clears passwords. Clears the configuration memory. Set to OFF Default. Enables the integrated video controller. Default. Enables configuration changes. Default for Compaq ProLiant 2500. System is installed in a tower chassis. Default. System booting from the diskette drive is controlled by the configuration settings. Default. System booting is password protected if a password is set. Default.