HP ProLiant 2500 Compaq ProLiant 2500 Family of Servers Maintenance and Servic - Page 31
Cable Folding and Routing Diagrams, Cable Diagram for Diskette Drive
View all HP ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2-18 Removal and Replacement Procedures Cable Folding and Routing Diagrams CAUTION: When routing cables, always make sure that the cables are not in a position where they will be pinched or crimped. IMPORTANT: All SCSI hard drives on the same SCSI bus must be internal (within the server) or in an external storage system, but not both. A configuration with both internal and external SCSI hard drives requires more than one single-channel SCSI controller. A multi-channel controller, such as the Compaq SMART-2 Array Controller, supports both internal and external SCSI hard drives on separate SCSI buses. IMPORTANT: All integrated 32-Bit SCSI-2 Controllers must be terminated by connecting one of the following to the Wide-Ultra SCSI connector on the system board: s Terminated SCSI cable s SCSI cable that is also attached to a hot-pluggable backplane s SCSI cable that is also attached to an internal SCSI ribbon cable for non-hot-pluggable SCSI drives Cable Diagram for Diskette Drive 271928-001