HP ProLiant 2500 Compaq ProLiant 2500 Family of Servers Maintenance and Servic - Page 48
Reverse steps 1 to 7 to replace the power supply., Lift power supply out
View all HP ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2-35 Figure 2-34.Removing the Power Supply 6. Remove the four screws at the rear of power supply. 7. Lift power supply out, pulling switch and cable through chassis. Reverse steps 1 to 7 to replace the power supply. IMPORTANT: When replacing the power supply, make sure that the power switch cable is properly threaded through the bracket's strain relief as shown in Figure 2-35. Figure 2-35. Power Supply Switch Cable Strain Relief Bracket Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-35
Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide
Figure 2-34.
Removing the Power Supply
6.
Remove the four screws at the rear of power supply.
7.
Lift power supply out, pulling switch and cable through chassis.
Reverse steps 1 to 7 to replace the power supply.
IMPORTANT:
When replacing the power supply, make sure
that the power switch cable is properly threaded through the
bracket’s strain relief as shown in Figure 2-35.
Figure 2-35.
Power Supply Switch Cable Strain Relief Bracket