HP ProLiant 2500 Compaq ProLiant 2500 Family of Servers Maintenance and Servic - Page 52
Battery, MSG042.EPS
View all HP ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2-39 Battery MSG042.EPS Figure 2-39. Battery Module 1. Remove the small access panel. 2. Remove expansion boards if necessary. 3. Connect the battery cable to the b attery header on the system I/O board. 4. Move the jumper on connector E2 from pins 1 and 2 to pins 2 and 3. 5. Attach the battery to the tray assembly using the self-stick adhesive. 6. Run Compaq System Configuration Utility. CAUTION: Do not remove the lithium battery from the system I/O board. Permanent damage may occur to the system I/O board if removed. If the battery fails, use the battery module replacement. WARNING: The battery/clock module contains a lithium battery that may explode if mishandled. Do not abuse, recharge, disassemble, or dispose of in fire or heat above 90° C, incinerate, or expose to water or fire. Use only replacement battery/clock modules supplied by Compaq Computer Corporation. Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide