HP ProLiant 2500 Compaq ProLiant 2500 Family of Servers Maintenance and Servic - Page 97

Logical Drive, status = FAILED, status = INTERIM RECOVERY, status = LOOSE CABLE DETECTED

Get HP ProLiant 2500 PDF manuals and user guides View all HP ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

3-45 Logical Drive X status = FAILED This status could be issued for several reasons. If this logical drive is configured for No Fault Tolerance and one or more drives fail, this status will occur. If mirroring is enabled, and any two mirrored drives fail, this status will occur. If Data Guarding is enabled, and two or more drives fail in this unit, this status will occur. This status may also occur if another configured logical drive is in the WRONG DRIVE REPLACED or LOOSE CABLE DETECTED state. Check for drive failures, wrong drive replaced, or loose cable messages. If there was a drive failure, replace the failed drive(s) and then restore the data for this logical drive from the tape backup. Otherwise, follow the wrong drive replaced or loose cable detected procedures. Logical Drive X status = INTERIM RECOVERY A physical drive in this logical drive has failed. The logical drive is operating in interim recovery mode and is vulnerable. Replace the failed drive as soon as possible. Logical Drive X status = LOOSE CABLE DETECTED A physical drive has a cabling problem. Turn the system off and attempt to reattach the cable onto the drive. If this does not work, replace the cable. Logical Drive X status = NEEDS RECOVER A physical drive in this logical drive has failed and has now been replaced. This drive needs to be rebuilt from the mirror drive or the parity data. When booting up the system, select the F1 - rebuild drive option to rebuild the replaced drive. Logical Drive X status = OVERHEATED The temperature of the Intelligent Array Expansion System drives is beyond safe operating levels and it has shut down to avoid damage. Check the fans and the operating environment. Logical Drive X status = OVERHEATING The temperature of the Intelligent Array Expansion System drives is beyond safe operating levels. Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-45
Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide
Logical Drive
X
status = FAILED
This status could be issued for several reasons. If this logical drive is configured for No
Fault Tolerance and one or more drives fail, this status will occur. If mirroring is enabled,
and any two mirrored drives fail, this status will occur. If Data Guarding is enabled, and
two or more drives fail in this unit, this status will occur. This status may also occur if
another configured logical drive is in the WRONG DRIVE REPLACED or LOOSE
CABLE DETECTED state.
Check for drive failures, wrong drive replaced, or loose cable messages. If there was a
drive failure, replace the failed drive(s) and then restore the data for this logical drive from
the tape backup. Otherwise, follow the wrong drive replaced or loose cable detected
procedures.
Logical Drive
X
status = INTERIM RECOVERY
A physical drive in this logical drive has failed. The logical drive is operating in interim
recovery mode and is vulnerable.
Replace the failed drive as soon as possible.
Logical Drive
X
status = LOOSE CABLE DETECTED
A physical drive has a cabling problem.
Turn the system off and attempt to reattach the cable onto the drive. If this does not work,
replace the cable.
Logical Drive
X
status = NEEDS RECOVER
A physical drive in this logical drive has failed and has now been replaced. This drive needs
to be rebuilt from the mirror drive or the parity data.
When booting up the system, select the
F1 - rebuild drive
option to rebuild the
replaced drive.
Logical Drive
X
status = OVERHEATED
The temperature of the Intelligent Array Expansion System drives is beyond safe operating
levels and it has shut down to avoid damage.
Check the fans and the operating environment.
Logical Drive
X
status = OVERHEATING
The temperature of the Intelligent Array Expansion System drives is beyond safe
operating levels.