HP ProLiant 4500 LAN Driver Statistics for Novell Drivers

HP ProLiant 4500 Manual

Get HP ProLiant 4500 PDF manuals and user guides View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals

HP ProLiant 4500 manual content summary:

  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 1
    4 PCNTNW.LAN Custom Statistics 9 CPQNF3.LAN CUSTOM STATISTICS 10 LAN DRIVER TOKEN RING STATISTICS 13 ECG043/1097 1... LAN Driver Statistics for Novell Drivers This integration note describes the statistics to diagnose network problems via the Novell MONITOR modules. The statistics supplement the
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 2
    Compaq, Compaq Insight Manager, ProLiant, SmartStart, NetFlex, registered United States Patent and Trademark Office. Netelligent is a trademark and/or service mark of Compaq ©1997 Compaq Computer Corporation. All rights reserved. Printed in the U.S.A. LAN Driver Statistics for Novell Drivers First
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 3
    ECG043/1097 INTEGRATION NOTE (cont.) 3... EXECUTIVE SUMMARY The Compaq network interface controller (NIC) drivers provide a number of statistics to aid in the diagnosis of network problems. These statistics can be viewed with MONITOR.NLM. Each statistic is listed in this document includes a
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 4
    ECG043/1097 INTEGRATION NOTE (cont.) 4... INTRODUCTION The Compaq network interface controller (NIC) drivers provide a number of statistics to aid in the diagnosis of network problems. These statistics can be viewed with MONITOR.NLM. Information such as Packets Received and Packets Sent are common
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 5
    it into two Ethernet segments by adding a NIC to your server. In this way you can balance the load by putting 50 problems. A late collision is one that occurred 64 bytes or more into the packet. Late collisions may be an indication that a segment is longer than allowed by the wiring specifications
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 6
    traffic by reorganizing your LAN or adding a NIC to the server. For example, if you have 100 stations on one Ethernet bus, break it Use the diagnostics from the hub manufacturer to help you determine if a problem exists. Send Abort from Carrier Sense The number of packets transmitted with carrier
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 7
    check. If you are using a 100-Mbit adapter in your server and the Intel PRO/100 adapter in your clients, you may see a large number of these errors. The problem can be alleviated by adding the following line to the LINK DRIVER E100ODI section of your client's NET.CFG files: THRESHOLD 200 If
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 8
    ECG043/1097 INTEGRATION NOTE (cont.) 8... reaches 4 billion. At that point, the LOW will start back at zero. Thus, in a normal situation, you will see a very active and very high count for the LOW statistic. The HIGH count statistic will be much smaller. An example of these types of counters is
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 9
    in time. Tx Buffer Error This error indicates that the frame buffers which were queued for transmission were not set up correctly by the software. Rx ECB's Over 16 Meg Count This is a standard statistics counter which counts receive Event Control Blocks located above 16 Megabytes. Tx ECB's Over
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 10
    . A console error message that details the problem will be generated. The adapter will be reset and operation should continue. The Adapter Reset statistic will also increment. At the next scheduled maintenance, bring down the server and run Compaq Diagnostics to determine if the board should be
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 11
    Use the diagnostics from the hub manufacturer to help you determine if a problem exists. 3. Run Compaq Diagnostics. If none of these suggestions clear the problem, contact your service provider. You may need a driver upgrade. VG Training Failures This statistic counts the number of times a training
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 12
    NOTE (cont.) 1...2 2. 3. Check your hub. This component may be at fault. Use the diagnostics from the hub manufacturer to help you determine if a problem exists. Run Compaq Diagnostics. If none of these suggestions clear the problem, contact your service provider. You may need a driver upgrade.
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 13
    NOTE (cont.) 1...3 LAN DRIVER TOKEN RING STATISTICS This section contains a list of statistics reported for the Compaq Token Ring controllers. These corrupting the frame. The analyzer should indicate which station is causing the problem, and let you know if the NIC should be replaced. Burst Errors
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 14
    completely compliant with 802.5 protocol. 2. Replace the NIC to see if the problem still occurs. Token Errors Token Errors are reported by the active monitor due same time. For example, this condition could occur when the power is off temporarily and then returned. In this example, several stations
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 15
    fatal error and remove the NIC from the ring. Those NICs that support aborting transmits will report this error. If this error is reported, one of, or a sum of, the following values: 00000000h: OK. No problems have been detected. 00000020h: Ring Recovery. The active monitor changes from one station
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 16
    Use the diagnostics from the MAU manufacturer to help you determine if a problem exists. 00001000h: Transmit Beacon. This error occurs when there is a break ring. If you see even one transmit beacon, investigate the problem immediately. The break is detected by the station immediately downstream of
  • HP ProLiant 4500 | LAN Driver Statistics for Novell Drivers - Page 17
    /1097 INTEGRATION NOTE (cont.) 1...7 NOTE: Not all stations will report this error, because not all NIC manufacturers support this feature. This error is not common and if there is a problem with the active monitor, other errors usually occur that will help you determine the station that is at
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
I
NTEGRATION
N
OTE
1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ECG043/1097
October, 1997
Prepared By
Novell Integration
Business Unit, Compaq
Computer Corporation
C
ONTENTS
Executive Summary
........
3
Introduction
...................
4
PCNTNW.LAN
Custom Statistics
...........
9
CPQNF3.LAN
CUSTOM
STATISTICS
...................
10
LAN DRIVER
TOKEN RING
STATISTICS
...................
13
LAN Driver Statistics for Novell Drivers
This integration note describes the statistics to diagnose network problems via the Novell
MONITOR modules.
The statistics supplement the diagnostic information that would
normally be obtained with a protocol analyzer or network monitor and gives an estimate
of network and controller activity.