HP ProLiant BL495c Solid State Hard Drive Option Installation Instructions for
HP ProLiant BL495c - G5 Server Manual
 |
View all HP ProLiant BL495c manuals
Add to My Manuals
Save this manual to your list of manuals |
HP ProLiant BL495c manual content summary:
- HP ProLiant BL495c | Solid State Hard Drive Option Installation Instructions for - Page 1
) Overview Use these instructions to install a solid state hard drive in the server blade. Kit contents • Solid state hard drive • Hard drive data cable* • Hard drive power cable* • This document *For use with HP ProLiant BL495c Generation 5 Server Blades only. Installing a hard drive WARNING: To - HP ProLiant BL495c | Solid State Hard Drive Option Installation Instructions for - Page 2
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth). This marking is valid for EU non-harmonized Telecom products. *Notified body number (used only if applicable-refer to the product label) Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034
-
1 -
2
 |
 |
Solid State Hard Drive Option
Installation Instructions
for HP ProLiant server blades
Overview
Use these instructions to install a solid state hard drive in the server
blade.
Kit contents
•
Solid state hard drive
•
Hard drive data cable*
•
Hard drive power cable*
•
This document
*For use with HP ProLiant BL495c Generation 5 Server Blades only.
Installing a hard drive
WARNING:
To reduce the risk of personal injury from hot
surfaces, allow the drives and the internal system
components to cool before touching them.
To install the component:
1.
Power down the server blade.
2.
Remove the server blade.
3.
Remove the access panel.
4.
Remove any component to access the hard drive location. For
detailed instructions, see the server blade-specific user guide.
5.
Connect the cables to the hard drive, if applicable. For
detailed instructions, see the server blade-specific user guide.
6.
Install the hard drive.
For detailed instructions and hard drive locations, see the label
attached to the server blade access panel or the documentation
that ships with the server blade.
7.
Connect and route the cables, if applicable. For detailed
instructions, see the server blade-specific user guide.
8.
Install any component removed when accessing the hard drive
location.
9.
Install the access panel.
10.
Install the server blade.
The installation is complete.
Regulatory compliance notices
European Union regulatory notice
This product complies with the following EU Directives:
•
Low Voltage Directive 2006/95/EC
•
EMC Directive 2004/108/EC
Compliance with these directives implies conformity to applicable
harmonized European standards (European Norms) which are listed
on the EU Declaration of Conformity issued by Hewlett-Packard for
this product or product family.
This compliance is indicated by the following conformity marking
placed on the product:
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 484105-021
July 2008 (First Edition)