HP ProLiant DL160 HP ProLiant DL165 Generation 5 Server Installation Sheet
HP ProLiant DL160 - G5 Server Manual
View all HP ProLiant DL160 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP ProLiant DL160 manual content summary:
- HP ProLiant DL160 | HP ProLiant DL165 Generation 5 Server Installation Sheet - Page 1
HP ProLiant DL165 Generation 5 Server Installation Sheet Identifying Server Components Front Panel HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - HP ProLiant DL160 | HP ProLiant DL165 Generation 5 Server Installation Sheet - Page 2
information and detailed procedures relating to installation of options, refer to any installation instructions that came with the option, as well as the HP ProLiant DL165 G5 series Server Maintenance and Service Guide. • For safety information and detailed procedures related to the rest of the - HP ProLiant DL160 | HP ProLiant DL165 Generation 5 Server Installation Sheet - Page 3
Fastening the non-hot-plug hard drive disk to the carrier 4. Connect the cabling from the HDD backplane to the drive using the cables provided. Installing a Memory Module The following guidelines must be followed when memory modules are being added or replaced: • Use only HP supported DDR 2 667 MHz - HP ProLiant DL160 | HP ProLiant DL165 Generation 5 Server Installation Sheet - Page 4
press the holding clips inward to secure the memory module in place. Figure 9 Installing a memory module Figure 11 Installing the heat sink assembly again. Installing a Processor The HP ProLiant DL165 Generation 5 server supports Dual-/Quad-core AMD Opteron 2000 series processors. To install the
HP ProLiant DL165
Generation 5 Server
Installation Sheet
First edition (September 2007)
Part number 449866-001
Important Safety Information
Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.
Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.
Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.
Identifying Server Components
Front Panel Components
Figure 1
Front panel components
Item
Description
1
Thumbscrews for rack mounting
2
Optical disk drive bay
3
Serial number pull tab
4
Two front USB 2.0 ports
5
Unit identification (UID) LED button
6
System health LED
7
NIC1 LED
8
NIC2 LED
9
Power button
10
HDD LED
11
Hard disk drive (HDD) bays 1, 2, 3, and 4
Rear Panel Components
Figure 2
Rear panel components
Item
Description
1
Power supply cable socket
2
PS/2 mouse port (green)
3
GbE LAN port for NIC2
4
Captive thumbscrew for top cover
5
Serial port (teal)
6
Low profile/Half length expansion slot
7
Full height/Full length expansion slot
8
T10/T15 Wrench
9
Thumbscrew for PCI cage
10
UID LED button
11
VGA port
12
HP LO100i Management LAN Port
13
Two rear USB 2.0 ports
14
GbE LAN port for NIC1/Management
15
PS/2 keyboard port (purple)
Legal notices
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties
for HP products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
AMD is a trademark of Advanced Micro Devices, Inc.