HP ProLiant ML110 ProLiant ML110 Generation 2 Server Installation Sheet
HP ProLiant ML110 - G2 Server Manual
View all HP ProLiant ML110 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP ProLiant ML110 manual content summary:
- HP ProLiant ML110 | ProLiant ML110 Generation 2 Server Installation Sheet - Page 1
HP ProLiant ML110 Generation 2 Server Installation Sheet Read instructions completely before beginning installation procedure. © Copyright January 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products - HP ProLiant ML110 | ProLiant ML110 Generation 2 Server Installation Sheet - Page 2
COM2) 16 CN20 IPMI connector 17 U34 BIOS 18 CN21 9-pin front USB connector 19 IDE1 IDE channel UDMA-100 27 SW1 System configuration switch (dip switch) 28 U46 Intel ICH6R bridge) 32 U9 Intel E7220 chipset (north bridge) 33 U10 Intel LGA775 CPU socket 34 DIMM1 to DIMM slots - HP ProLiant ML110 | ProLiant ML110 Generation 2 Server Installation Sheet - Page 3
, while the non-hot-plug model supports both SATA and SCSI drives. CAUTION: Drives can be damaged by static electricity. Before handling drives, touch an unpainted metal surface to discharge static electricity. WARNING: If you are going to install a non-hot-plug drive, power down the server first. - HP ProLiant ML110 | ProLiant ML110 Generation 2 Server Installation Sheet - Page 4
. Replacing the Processor The LGA775 CPU socket in the HP ProLiant ML110 Generation 2 server supports an Intel® Pentium® 4 processor. Installing Memory The HP ProLiant ML110 Generation 2 server has four DIMM slots that support up to 4 GB maximum system memory (1 GB in each of the four DIMM slots
HP ProLiant ML110
Generation 2 Server
Installation Sheet
Read instructions completely before beginning
installation procedure.
© Copyright January 2005 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for technical
or editorial errors or omissions contained herein.
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.
HP ProLiant ML110 Generation 2 Server Installation Sheet
First Edition (January 2005)
Part Number 375600-001
375600- 001
Configuring the Server
1.
Connect all peripherals:
—
Keyboard
—
Mouse
—
Monitor
NOTE:
Refer to the HP ProLiant ML110 Generation 2 Server Support CD.
Refer to the CD contents for a
dditional information and updates not
provided in this installation sheet.
2.
Determine the server BIOS version:
a.
Power up the server.
b.
Press the
Esc
key at the HP logo screen, then press the
Pause
key to halt screen movement.
c.
Note the server BIOS version.
d.
Verify the server BIOS vers
ion against the latest BIOS
version listed for this server on the HP website:
e.
If you do not have the latest BIOS, update the BIOS now.
Refer to the
HP ProLiant ML110 Generation 2 Server
Maintenance and Service Guide
available on the HP
website:
Default Boot Priority
By default, the server searches for boot devices in the following
order:
1.
Removable device
2.
IDE CD-ROM drive
3.
Hard disk drive
4.
PXE IBA GE slot 0A08 V1219
Identifying Server Components
Front Panel Components
Table 1:
Front Panel Components
Item
Description
1
CD-ROM drive
2
CD-ROM drive mechanical eject hole
3
CD-ROM drive eject button
4
CD-ROM drive activity indicator
5
Full-height common bays
6
Dual-color status LED indicator
•
Green – Power indicator
•
Amber – System health indicator
continued