HP ProLiant SL170s HP ProLiant SL170s G6 Server Installation Sheet

HP ProLiant SL170s - G6 Server Manual

Get HP ProLiant SL170s - G6 Server PDF manuals and user guides View all HP ProLiant SL170s manuals
Add to My Manuals
Save this manual to your list of manuals

HP ProLiant SL170s manual content summary:

  • 1
  • 2
HP ProLiant SL170s G6 Server
Installation Sheet
Part number 625206-001
July 2010 (First Edition)
Important Safety Information
Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.
Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.
Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.
Legal notices
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties
for HP products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Identifying Server Components
Front Panel Components
SL170s G6 Server Front Panel Components
Figure 1
Front panel components of the s6500 chassis with 8 SL170s servers
Item
Description
1
VGA port
2
Serial port
3
Health LED/SW
4
Top: 1 GbE NIC2 LAN Port/Shared Mgmt port
Bottom: 1 GbE NIC1 LAN Port
5
Top: USB 2.0 Port
Bottom: USB 2.0 Port
6
Front PCIe bracket (LP slot)
7
UID LED/SW
8
Power LED/SW
9
Dedicated Management Port
(IPMI) (Optional)
Rear Panel Components
Figure 2
Rear panel components of the s6500 chassis with 8 SL170s servers
Item
Description
1
Power Supply 1
2
Power Supply 2
3
Power Supply 3
4
optional power supply/SLAPM Interface
5
UID LED
6
RJ45 Connector
7
Fan 1
8
Fan 2
9
Fan 3
10
Fan 4
11
Fan 5
Item
Description
12
Fan 6
13
Fan 7
14
Fan 8
Server Configuration Resources
In addition to this Installation Sheet, other resources are available for more
information regarding the configuration and maintenance of your server:
•
For safety information and detailed procedures relating to installation of options,
refer to any installation instructions that came with the option, as well as the
HP
ProLiant SL170s G6 Server Maintenance and Service Guide
.
•
For safety information, regulatory notices, and detailed procedures related to
the rest of the steps listed in the “Configuring the Server” section, refer to the
relevant chapter of the
HP ProLiant SL6000/6500 Scalable System User Guide
.
•
For information relating to system BIOS configuration and operating system
installation, refer to relevant section of the
HP ProLiant SL170s G6 Server
Software Configuration Guide
.
•
Refer to the
HP ProLiant SL170s G6 Server Easy Set-up CD
for additional
information and updates not provided in this installation sheet. You can also
access additional information and documentation from the HP website at
www.hp.com/
, either by connecting directly or through the Easy Set-up CD.
Server Configuration Overview
The steps listed below give an overview of the necessary setup procedures for
preparing the HP ProLiant SL170s G6 Server for operation:
1.
Connect the AC power cord and peripheral devices.
2.
Power up the server.
3.
Press “F10” to enter BIOS setup.
4.
Note the server BIOS version.
5.
Verify the server BIOS version against the latest BIOS version listed for this
server on the HP website:
www.hp.com
.
6.
If you do not have the latest BIOS, update the BIOS now. Refer to the HP ProLiant
SL170s G6 Server User Guide available on the HP website:
www.hp.com
.
7.
Install a supported operating system of your choice. For detailed procedures,
refer to the documentation provided by the operating system vendor. For a list
of operating systems supported by your ProLiant server, go to
www.hp.com/go/supportos
.
Pre- and Post-installation
Procedures
When installing additional options in your HP ProLiant SL170s G6 Server, observe
the following procedures:
Pre-installation procedures
1.
Turn off the server and all the peripherals connected to it.
2.
Remove the server from the chassis by following the procedure described later
in the “Removing the server” section.
Post-installation procedures
1.
Be sure all components are installed according to the described step-by-step
instructions.
2.
Check to make sure you have not left loose tools or parts inside the server.
3.
Reinstall the PCI riser, peripherals, and system cables that you have removed.
4.
Reinstall the server into the chassis.
5.
Connect all external cables to the system.
6.
Press the power button on the front panel to turn on the server.
Removing the Server
You need to remove the server from the chassis before you can remove or replace a
server component.
To remove server:
1.
Release the handle.
2.
Extend the server from the chassis until the release latch catches.
3.
Firmly holding the server, press the release button.
4.
Remove the server from chassis.
5.
Install the server blank in the server slot.
Figure 3
Removing the SL170s left server
Figure 4
Removing the SL170s right server
Installing the Hard Disk Drive
One SL170s G6 server tray can accommodate up to 2 LFF or 4 SFF hard disk drives,
one chassis can accommodate 8 server trays for up to 16 LFF or 32 SFF hard disk
drives. The server supports both SAS and SATA hard disk drives and SSDs.
CAUTION:
Drives can be damaged by static electricity. Before handling
drives, touch an unpainted metal surface to discharge static electricity.
To install LFF hard disk drive on one side of server tray:
1.
Unlock the HDD carrier latches.
2.
Rotate the HDD carrier handle up.
3.
Insert the HDD carrier and align the pins.
4.
Rotate the HDD carrier handle down.
5.
Lock the HDD carrier latches.
Figure 5
Installing the hard disk drive