HP RP36000/3 HP 3 Phase UPS Installation Instructions

HP RP36000/3 Manual

HP RP36000/3 manual content summary:

  • HP RP36000/3 | HP 3 Phase UPS Installation Instructions - Page 1
    any of the topics covered in this document, see the UPS user guide located on the documentation CD or HP website (http://www.hp.com/go/rackandpower). Precautions Save these instructions. This document contains important safety instructions that should be followed during installation, operation, and
  • HP RP36000/3 | HP 3 Phase UPS Installation Instructions - Page 2
    label. After determining the class of the device, refer to the user guide for complete regulatory compliance notices. UPS kit contents • This document and has passed without the battery being recharged, contact an HP authorized service representative for directions. 2. Transport the packaged unit
  • HP RP36000/3 | HP 3 Phase UPS Installation Instructions - Page 3
    3. Install the mounting ears on the chassis using the screws provided. Installing the batteries WARNING: To prevent personal injury, prepare the area and observe all materials-handling procedures when transporting a battery module. Battery modules weigh 20 kg (44 lb). 4. With one person on each
  • HP RP36000/3 | HP 3 Phase UPS Installation Instructions - Page 4
    . Be sure to verify polarity while connecting the REPO port in parallel with other HP UPSs. WARNING: To meet the requirements stated in NEC (NFPA " in the user guide. For information about verifying the REPO connection, see "Verifying the REPO port connection" in the user guide. Connecting to
  • HP RP36000/3 | HP 3 Phase UPS Installation Instructions - Page 5
    Standby mode, allow the batteries to charge before putting the UPS into service. IMPORTANT: Charge the batteries for at least 48 hours before supplying backup alarms before continuing. For more information, see "Troubleshooting" in the user guide. 4. Switch the UPS battery circuit breaker to the
  • HP RP36000/3 | HP 3 Phase UPS Installation Instructions - Page 6
    alarms clear. Check the UPS status from the front panel to view the active alarms. Correct the alarms and restart if necessary. 6. Press any button once and then press the left arrow button to select the TURN UPS ON/OFF menu. 7. Press the down arrow button to select the TURN UPS ON option. Press the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

HP 3 Phase UPS
Installation Instructions
3 Phase UPS overview
The HP 3 Phase UPS features a 6U rack-mount design which offers
power protection for loads up to 12000 VA/12000 W.
For more information about any of the topics covered in this
document, see the UPS user guide located on the documentation CD
).
Precautions
Save these instructions. This document contains important safety
instructions that should be followed during installation, operation,
and maintenance of the UPS and batteries.
WARNING:
A risk of personal injury from electric shock
and hazardous energy levels exists. The installation of
options and routine maintenance and service of this
product must be performed by individuals who are
knowledgeable about the procedures, precautions, and
hazards associated with AC power products.
WARNING:
To prevent personal injury from earth
conductor leakage current:
Do not operate the UPS while disconnected from the
utility power source.
Disconnect load devices before disconnecting the UPS
from the utility power source.
127 kg
280 lb
This symbol indicates that the UPS exceeds the
recommended weight for one individual to handle
safely.
WARNING:
To reduce the risk of personal injury
or damage to the equipment, observe local
occupational health and safety requirements and
guidelines for manual material handling.
© Copyright 2007, 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Part Number 435253-002
June 2008 (Second Edition)