HP RP36000/3 HP 3 Phase ERM Installation Instructions
HP RP36000/3 Manual
View all HP RP36000/3 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP RP36000/3 manual content summary:
- HP RP36000/3 | HP 3 Phase ERM Installation Instructions - Page 1
HP 3 Phase ERM Installation Instructions © Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services UPS user guide located on the documentation CD or HP website (http://www.hp.com/ - HP RP36000/3 | HP 3 Phase ERM Installation Instructions - Page 2
for the specific UPS as stated in "Input specifications" in the user guide. Readying the equipment 1. Check the battery recharge date specified on label has passed without the battery being recharged, contact an HP authorized service representative for directions. 2. Transport the packaged unit to - HP RP36000/3 | HP 3 Phase ERM Installation Instructions - Page 3
1. Loosen the hex nuts, and extend the brackets to the desired length. 4. Insert screws through the mounting rail into the cage nuts or clip nuts. 2. Insert screws through the rack into the mounting rail and the front of each mounting bracket. 5. Tighten the hex nuts. 3. Install cage nuts or - HP RP36000/3 | HP 3 Phase ERM Installation Instructions - Page 4
alarm sounds, the Alarm LED flashes, and the LCD displays "Battery not connected." To silence an audible alarm, see "Silencing a UPS audible alarm" in the user guide. - HP RP36000/3 | HP 3 Phase ERM Installation Instructions - Page 5
. The UPS auto-detects ERM installation by updating the system runtime. If the system runtime is not updated, verify installation or see "Troubleshooting" in the user guide. Attaching the ERM front bezel NOTE: To install a second ERM, plug the cable from the second ERM into the socket at the - HP RP36000/3 | HP 3 Phase ERM Installation Instructions - Page 6
the ERM batteries. With the UPS in Standby mode, allow the ERM batteries to charge for at least 24 hours before putting the UPS into service.
HP 3 Phase ERM
Installation Instructions
Overview
The ERM connects directly to an HP 3 Phase UPS or
to another 3 Phase ERM. Up to four ERM units can
be connected.
The UPS automatically detects ERM connection or
disconnection by updating the system runtime.
For more information about any of the topics covered in this
document, see the UPS user guide located on the
documentation CD or HP website
).
Precautions
WARNING:
A risk of personal injury from electric
shock and hazardous energy levels exists. The
installation of options and routine maintenance and
service of this product must be performed by
individuals who are knowledgeable about the
procedures, precautions, and hazards associated
with AC power products.
77 kg
170 lb
This symbol indicates that the ERM exceeds
the recommended weight for one individual
to handle safely.
WARNING:
To reduce the risk of personal
injury or damage to the equipment, observe
local occupational health and safety
requirements and guidelines for manual
material handling.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Part Number 435255-0
0
1
June 2007 (First Edition)