HP Rp3000 HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide
HP Rp3000 - Point of Sale System Manual
 |
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Rp3000 manual content summary:
- HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 1
Computer Setup (F10) Utility Guide HP rp3000 - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 2
that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Computer Setup (F10) Utility Guide HP rp3000 First Edition (August 2008) Document Part Number: 498352-001 - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 3
About This Book This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance purposes. WARNING! Text set off in this manner indicates that failure to follow directions could - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 4
iv About This Book ENWW - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 5
Table of contents Computer Setup (F10) Utility Computer Setup (F10) Utilities ...1 Using Computer Setup (F10) Utilities 2 Computer Setup-File ...2 Computer Setup-Storage 3 Computer Setup-Security 5 Computer Setup-Power ...7 Computer Setup-Advanced 7 Recovering the Configuration Settings 9 ENWW - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 6
vi ENWW - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 7
power-on password prompt during system restarts (warm boots) as well as during power-on. ● Establish a setup password that controls access to Computer Setup (F10) Utility and the settings described in this section. ● Secure integrated I/O functionality, including the serial, USB, or parallel ports - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 8
Setup-Storage on page 3 Security Table 4 Computer Setup-Security on page 5 Power Table 5 Computer Setup-Power on page 7 Advanced Table 6 Computer Setup-Advanced (for advanced users) on page 7 Computer Setup-File NOTE: Support for specific Computer Setup options may vary depending on the - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 9
2 Computer Setup-File (continued) System Information Lists: ● Product name ● SKU number (some models) ● Processor type/speed/stepping ● Cache size (L1/L2) (dual core processors have this listed twice) ● Installed memory size/speed, number of channels (single or dual) (if applicable) ● Integrated MAC - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 10
. When Disable is selected, the BIOS will service ATA disk read and write requests with PIO data transfers. SATA Emulation Allows you to choose how the SATA controller and devices are accessed by the operating system. There are two supported options: Separate IDE Controller and Combined IDE - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 11
is attached to the system. Boot Order Allows you to: ● Specify the order in which attached devices (such as a USB flash media device, hard Computer Setup options, flash the ROM, and make changes to certain plug and play settings under Windows. Power-On Password See the Troubleshooting Guide - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 12
Serial Port A ● Serial Port B ● Serial Port C (if an optional serial port expansion card is installed) ● Serial Port D (if an optional serial port expansion card is installed) ● All USB Ports ● System Audio ● Network Controller (some models) Network Service Boot Enables/disables the computer - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 13
● USB Wake on Device Insertion (some models)-Allows system to wake from Standby on USB device Computer Setup-Advanced NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 6 Computer Setup-Advanced (for advanced users) Option Heading Power - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 14
this feature if booting to Windows NT. ● ACPI/USB Buffer @ Top of Memory (enable/disable). Enabling this feature frees up DCH memory for options ROMs or memory managers. Execute Memory Test Restarts the computer and executes the POST memory test. (some models) BIOS Power-On Allows you to set the - HP Rp3000 | HP rp3000 Point of Sale System - Computer Setup (F10) Utility Guide - Page 15
the network controller from being used by the operating system and reduces the power used by the computer in S5. ● Processor cache (enable/disable). ● Integrated Video (enable/disable) Allows you to use integrated video and PCI Up Solution video at the same time (available on some models only
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
Computer Setup (F10) Utility Guide
HP rp3000