HP SB40c HP StorageWorks SB40c Storage Blade User Guide (433904-002, November
HP SB40c Manual
View all HP SB40c manuals
Add to My Manuals
Save this manual to your list of manuals |
HP SB40c manual content summary:
- HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 1
HP StorageWorks SB40c Storage Blade User Guide Part Number 433904-002 November 2006 (Second Edition) - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 2
trademarks of Microsoft Corporation. Audience assumptions This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 3
a full-height partner server blade 11 Installing a storage blade ...12 Hardware options installation...16 Hard drive options ...16 SAS and SATA hard drive guidelines 16 SAS or SATA hard drive...16 HP Smart Array P400 Controller...17 Configuration and utilities ...18 Configuration tools ...18 Array - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 4
of another drive during rebuild 25 Drive failure in a NetWare environment ...25 Failed drives or interim recovery mode 25 Handling disk drive failures ...25 specifications ...30 Storage blade specifications ...30 Technical support...31 Before you contact HP...31 HP contact information ...31 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 5
In this section Front panel LEDs ...5 Front panel components ...6 SAS and SATA device numbers ...6 SAS and SATA hard drive LEDs ...7 SAS and SATA hard drive LED combinations 7 Front panel LEDs Item 1 2 3 4 Description UID LED System health LED Reserved Reserved Status Blue = Identified Off - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 6
Front panel components Item 1 2 Description Serial pull tab Storage blade handle SAS and SATA device numbers Component identification 6 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 7
failure alert has been received for this drive. Replace the drive as soon as possible. The drive is online, but it is not active currently. Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is part of an array that is undergoing capacity - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 8
has placed it offline. Replace the drive as soon as possible. A predictive failure alert has been received for this drive. Replace the drive as soon as possible. The drive is offline, a spare, or not configured as part of an array. For more information, see "HP Smart Array P400 Controller (on page - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 9
SB40c so the partner server blade can identify and configure them at power up. • Be sure that the SB40c is installed as shown in the installation guidelines (on page 11). • Be sure that the partner server blade is powered down. To power up the SB40c: 1. Install the SB40c ("Installing a storage blade - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 10
When unpacking the HP StorageWorks SB40c storage blade, locate the following items: • HP StorageWorks SB40c storage blade • Coupler plate • Documentation kit Installing an HP BladeSystem c-Class enclosure Before performing any procedures specific to the SB40c, install an HP BladeSystem c-Class - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 11
An SB40c supports one partner server blade, and a partner server blade supports one SB40c. • Install hard drives in the SB40c before installing the SB40c in the enclosure. • Be sure that the partner server blade is powered down before installing the SB40c. Onboard Administrator is used to configure - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 12
server blade, a half-height server blade can be installed in the empty bay above the SB40c. This server blade cannot be partnered with the SB40c. Installing a storage blade CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the enclosure unless all hard drive - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 13
3. Remove the enclosure connector cover. 4. Identify the partner server blade to be installed with the SB40c: o To install the SB40c with a half-height server blade, proceed with the next step. o To install the SB40c with a full-height server blade, install the coupler plate. Setup 13 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 14
5. Prepare the storage blade for installation. 6. Install the storage blade: o Partnered with a half-height server blade Setup 14 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 15
o Partnered with a full-height server blade 7. Install a server blade. See the documentation that ships with the server blade. 8. Configure the SB40c ("Configuration tools" on page 18). Setup 15 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 16
to the SB40c, observe the following general guidelines: • Install hard drives in in the lowest-numbered available hard drive bay. • To provide the greatest storage space efficiency when drives are grouped together in the same drive array, drives must be the same capacity . NOTE: ACU does not support - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 17
enclosure ("Installing a storage blade" on page 12). 5. Power up the partner server blade. See the server blade documentation. 6. Determine the status of the hard drive from the SAS and SATA hard drive LED combinations (on page 7). 7. Configure the SB40c ("Configuration tools" on page 18). HP Smart - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 18
CD or the HP website (http://www.hp.com). Option ROM Configuration for Arrays Before installing an operating system, you can use the ORCA utility to create the first logical drive, assign RAID levels, and establish online spare configurations. The utility also provides support for the following - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 19
to enable fault, performance, and configuration management. The agents allow easy manageability of the server through HP SIM software, and thirdparty SNMP management platforms. Management Agents are installed with every SmartStart assisted installation or can be installed through the HP PSP. The - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 20
Pack Services offer upgraded service levels to extend and expand standard product warranty with easy-to-buy, easy-to-use support packages that help you make the most of your server investments. Refer to the Care Pack website (http://www.hp.com/hps/carepack/servers/cp_proliant.html). Configuration - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 21
23 Automatic data recovery (rebuild) ...24 Drive failure in a NetWare environment...25 When the storage blade does not power up If the SB40c does not start: 1. Be sure that the SB40c is installed adjacent to the partner server blade. 2. Use the Onboard Administrator to be sure that sufficient - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 22
the Management CD.) • ADU lists all failed drives. • CPQONLIN identifies failed drives in a NetWare environment. For additional information about diagnosing hard drive problems, see the HP ProLiant Servers Troubleshooting Guide. CAUTION: Sometimes, a drive that has previously failed may seem to be - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 23
rebuilt. If the array has no online spare, any logical drives in this array that are configured with RAID 5 fault tolerance will fail. Compromised fault tolerance can also be caused by non-drive problems, such as a faulty cable or temporary power loss to a storage system. In such cases, you do not - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 24
spare drive • Failure of a drive that is not mirrored to any other failed drives (in a RAID 1+0 configuration) • Failure of a second drive in a RAID 6 configuration a conservative estimate, and newer drive models usually require less time to rebuild. System performance is affected during the rebuild, - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 25
the SB40c was configured with hardware fault tolerance, complete the following steps after a disk drive failure: 1. Determine which physical drive failed. On hot-plug drives, an amber drive failure LED illuminates. 2. If the unit containing the failed drive does not support hot-plug drives, perform - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 26
The online LED flashes, indicating that the SB40c recognized the drive replacement and began the recovery process. 4. If applicable, power up the partner server blade ("Power up" on page 9). 5. The SB40c reconstructs the information on the new drive, based on information from the remaining physical - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 27
Regulatory compliance notices In this section European Union regulatory notice ...27 BSMI notice ...27 Korean class A notice ...28 European Union regulatory notice This product complies with the following EU Directives: • Low Voltage Directive 73/23/EEC • EMC Directive 89/336/EEC Compliance with - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 28
Korean class A notice Regulatory compliance notices 28 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 29
floor mats. • Use conductive field service tools. • Use a portable field service kit with a folding static-dissipating work mat. If you do not have any of the suggested equipment for proper grounding, have an authorized reseller install the part. For more information on static electricity - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 30
corresponds to a pressure minimum of 70 KPa. ‡ Maximum allowable altitude change rate is 457 m/min (1500 ft/min). Storage blade specifications Specification Height Depth Width Weight (maximum) Weight (no drives installed) Value 5.56 cm (2.19 in) 50.95 cm (20.06 in) 18.16 cm (7.15 in) 5.0 (11 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 31
time and allow for greater flexibility in performing defective parts replacement. If during the diagnosis period HP (or HP service providers or service partners) identifies that the repair can be accomplished by the use of a CSR part, HP will ship that part directly to you for replacement. There are - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 32
HP Technical Support Center and a technician will help you over the telephone. HP specifies in the materials shipped with a replacement CSR part whether a defective part must be returned to HP vous demandez à HP de remplacer ces pièces, les coûts de déplacement et main d'œuvre du service vous seront - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 33
del ricambio da parte di HP. Nel caso di riparazione da parte del cliente, HP sostiene tutte le Austausch dieser Teile von HP vornehmen lassen möchten, können bei diesem Service je nach den für Sie Hilfe benötigen, können Sie das HP technische Support Center anrufen und sich von einem Mitarbeiter per - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 34
HP Website unter (http://www.hp.com/go/selfrepair). Reparaciones del propio cliente Los productos de HP parte del usuario es obligatoria. Si solicita a HP HP HP HP de HP, pó HP siguiente (http://www.hp.com/go/selfrepair). Customer Self Repair Veel onderdelen in HP HP (of een HP Service Partner - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 35
/transportonderneming hiervoor wordt gebruikt. Neem contact op met een Service Partner voor meer informatie over het Customer Self Repair programma van HP. Informatie over Service Partners vindt u op de HP website (http://www.hp.nl/services/servicepartners). Reparo feito pelo cliente Os produtos da - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 36
de transporte e de devolução da peça e determina a transportadora/serviço postal a ser utilizado. Para obter mais informações sobre o programa de reparo feito pelo cliente da HP, entre em contato com o fornecedor de serviços local. Para o programa norte-americano, visite o site da - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 37
Technical support 37 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 38
Technical support 38 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 39
Utility CSR Customer Self Repair FC Fibre Channel ISEE Instant Support Enterprise Edition ORCA Option ROM Configuration for Arrays OSEM Open Services Event Manager PSP ProLiant Support Pack RAID redundant array of inexpensive (or independent) disks SAS serial attached SCSI SATA serial ATA - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 40
SIM Systems Insight Manager UID unit identification Acronyms and abbreviations 40 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 41
hard drive LEDs 7 hard drive, failure of 22 hard drives 16 hard drives, determining status of 7 hardware options 16 hardware options installation 16 health LEDs 5 HP ProLiant Essentials Foundation Pack 19 HP Systems Insight Manager, overview 19 HP technical support 31 I installation instructions 12 - HP SB40c | HP StorageWorks SB40c Storage Blade User Guide (433904-002, November - Page 42
specifications 30 static electricity 29 support 19, 31 T technical support 31 telephone numbers 31 troubleshooting 21 U UID LEDs 5 Index 42
HP StorageWorks SB40c Storage Blade
User Guide
Part Number 433904-002
November 2006 (Second Edition)