HP SN6000 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network
HP SN6000 Manual
View all HP SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP SN6000 manual content summary:
- HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 1
Simple Network Management Protocol Reference Guide describes how to use SNMP to manage and monitor the HP StorageWorks SN6000 and 8/20q Switch products. It is intended for users responsible for supporting SNMP and SN6000 and 8/20q Fibre Channel Switch configurations. Part Number: 5697-0409 Published - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 2
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. QuickTools™ is a trademark of QLogic Corporation. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 3
20 30 ifOutQLen (1.3.6.1.2.1.2.2.1.21 30 ifSpecific (1.3.6.1.2.1.2.2.1.22 31 The Address Translation group 31 atIfIndex (1.3.6.1.2.1.3.1.1.1 31 atPhysAddress (1.3.6.1.2.1.3.1.1.2 31 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 3 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 4
ipReasmFails (1.3.6.1.2.1.4.16 36 ipFragOKs (1.3.6.1.2.1.4.17 36 ipFragFails (1.3.6.1.2.1.4.18 36 ipFragCreates (1.3.6.1.2.1.4.19 36 The IP Address table 37 ipAdEntAddr (1.3.6.1.2.1.4.20.1.1 37 ipAdEntIfIndex (1.3.6.1.2.1.4.20.1.2 37 ipAdEntNetMask (1.3.6.1.2.1.4.20.1.3 37 ipAdEntBcastAddr - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 5
(1.3.6.1.2.1.8.5.1.3 56 egpNeighInMsgs (1.3.6.1.2.1.8.5.1.4 56 egpNeighInErrs (1.3.6.1.2.1.8.5.1.5 57 egpNeighOutMsgs (1.3.6.1.2.1.8.5.1.6 57 egpNeighOutErrs (1.3.6.1.2.1.8.5.1.7 57 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 5 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 6
11.27 65 snmpOutGetResponses (1.3.6.1.2.1.11.28 65 snmpOutTraps (1.3.6.1.2.1.11.29 65 snmpEnableAuthenTraps (1.3.6.1.2.1.11.30 66 4 Fibre Alliance MIB Objects 67 FA-MIB definitions 67 revisionNumber 68 Connectivity Unit group 69 uNumber (1.3.6.1.3.94.1.1 69 systemURL (1.3.6.1.3.94.1.2 69 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 7
(1.3.6.1.3.94.1.10.1.19 96 connUnitPortProtocolCap (1.3.6.1.3.94.1.10.1.20 96 connUnitPortProtocolOp (1.3.6.1.3.94.1.10.1.21 97 connUnitPortNodeWwn (1.3.6.1.3.94.1.10.1.22 97 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 7 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 8
connUnitPortHWState (1.3.6.1.3.94.1.10.1.23 97 Event table 98 connUnitEventUnitId (1.3.6.1.3.94.1.11.1.1 98 connUnitEventIndex (1.3.6.1.3.94.1.11.1.2 98 connUnitEventId (1.3.6.1.3.94.1.11.1.3 99 connUnitREventTime (1.3.6.1.3.94.1.11.1.4 99 connUnitSEventTime (1.3.6.1.3.94.1.11.1.5 99 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 9
.5.2.1.1.15 130 Platform table 130 connUnitPlatformMaxEntry (1.3.6.1.3.94.5.1.2 130 connUnitPlatformIndex (1.3.6.1.3.94.5.2.2.1.1 131 connUnitPlatformNodeIndex (1.3.6.1.3.94.5.2.2.1.2 131 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 9 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 10
.0.5 138 connUnitPortStatusChange (1.3.6.1.3.94.0.6 139 coldStart 139 authenticationFailure 139 5 Fabric Element MIB Objects 141 Fibre Channel FE-MIB definitions 141 Configuration group 142 fcFeFabricName (1.3.6.1.2.1.75.1.1.1 142 fcFeElementName (1.3.6.1.2.1.75.1.1.2 142 fcFeModuleCapacity - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 11
11 155 fcFxPortBbCreditModel (1.3.6.1.2.1.75.1.2.3.1.12 155 The Error group 156 fcFxPortLinkFailures (1.3.6.1.2.1.75.1.3.1.1.1 156 fcFxPortSyncLosses (1.3.6.1.2.1.75.1.5.1.1.4 166 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 11 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 12
Firmware Download MIB Objects 175 Firmware download MIB definitions Support and Other Resources 179 Document conventions and symbols 179 Contacting HP 180 HP contact information 180 Subscription service return for for 8/20q FC Switch and SN6000 Single Power Supply FC Switch . . 84 12 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 13
for values for SN6000 Dual Power Supply FC Switch 84 14 ConnUnitSensorStatus 137 30 Filter trap levels 138 31 FE-MIB textual substitutions 141 32 Module operational status return HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 14
14 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 15
to the internal database of the switch. Workstation with SNMP manager application Ethernet connection Figure 1 SNMP interface architecture Switch with agent and common user interface API HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 15 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 16
conforms to the Structure of Management Information (SMI) in the Request For Comment (RFC) 1155. The latest Internet MIB is in RFC 1213 and is sometimes called MIB-II. User Datagram Protocol The SN6000 and 8/20q Fibre Channel Switches support the following UDP settings: • Agents listen on UDP port - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 17
in the HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide or the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. To configure a switch using the command line interface, press Enter to accept the default value for each parameter: 8/20q FC Switch (admin - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 18
SNMPv3Enabled (True / False) : SNMP Trap 1 Configuration - may optionally use 'set setup snmp trap 1' command. Current Values: Trap1Enabled Trap1Address (select a severity level) 1=unknown 6=warning 2=emergency 7=notify 3=alert 8=info 4=critical 9=debug 18 Configuring a Switch - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 19
: SNMP Trap 4 Configuration - may optionally use 'set setup snmp trap 4' command. Current Values: Trap4Enabled Trap4Address Trap4Port Trap4Severity Trap4Version False 0.0.0.0 162 warning 2 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 19 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 20
level) 1=unknown 6=warning 2=emergency 7=notify 3=alert 8=info 4=critical 9=debug 5=error 10=mark : Trap5Version (1 / 2) : Trap5Community (string, max=32 chars) : Do you want to save and activate this snmp setup? (y/n): [n] y SNMP setup saved and activated 20 Configuring a Switch - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 21
activate this snmpv3user setup ? (y/n): [n] y SNMPV3 user added and activated. Configuring a switch using the Simple SAN Connection Manager To configure an SN6000 or 8/20q Fibre Channel Switch using the HP StorageWorks Simple SAN Connection Manager, use the Set Switch Admin Password, Set Switch IP - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 22
22 Configuring a Switch - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 23
the SN6000 Fibre Channel switch is either HP StorageWorks SN6000 Stackable Dual Power Supply Fibre Channel Switch or HP StorageWorks SN6000 Stackable Single Power Supply Fibre Channel Switch. The default for the 8/20q Fibre Channel Switch is HP StorageWorks 8/20q Fibre Channel Switch. sysObjectID - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 24
FC switch is 1.3.6.1.4.1.3873.1.11. The value for the SN6000 Dual Power Supply FC switch is 1.3.6.1.4.1.3873.1.25. The value for the SN6000 Single Power Supply FC switch (0..255)) Access Read-write Status Mandatory Return value The default is . The string size is limited to - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 25
value The default for the SN6000 Fibre Channel Switch is SN6000 FC Switch. The default for the 8/20q Fibre Channel Switch is 8/20q FC Switch. sysLocation Syntax INTEGER Access Read-only Status HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 25 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 26
Mandatory Return value The default is 2. The Interfaces table The Interfaces table contains information on the entity's interfaces. Each interface is thought of as being attached , this is the size of the largest network datagram that can be sent on the interface. Syntax INTEGER 26 MIB-II Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 27
not supported. ifOperStatus (1.3.6.1.2.1.2.2.1.8) The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. Syntax INTEGER Access HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 28
number of non-unicast (that is, subnetwork broadcast or subnetwork multicast) packets delivered to a higher-layer protocol. Syntax Counter Access Read-only Status Mandatory 28 MIB-II Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 29
Mandatory ifInErrors (1.3.6.1.2.1.2.2.1.14) The number of inbound packets that contained errors that prevent them from being deliverable to a higher-layer that were discarded or not sent. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 29 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 30
outbound packets that were chosen to be discarded even though no errors that could prevent their transmission were detected. One possible reason for of outbound packets that could not be transmitted because of errors. Syntax Counter Access Read-only Status Mandatory ifOutQLen (1.3.6.1.2.1.2.2.1.21 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 31
receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 31 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 32
Status Deprecated The IP group Implementation of the IP group is mandatory but not addressed to, this entity. IP gateways forward datagrams; IP hosts do not (except those source-routed supported. ipDefaultTTL (1.3.6.1.2.1.4.2) The default value inserted into the Time-To-Live (TTL) field of the IP - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 33
act as IP gateways, this counter includes only those packets that were Source Routed from this entity, and the Source Route option processing was successful. Syntax Counter Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 33 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 34
(1.3.6.1.2.1.4.8) The number of input IP datagrams for which no problems were encountered to prevent their continued input datagrams successfully delivered to IP user protocols (including Internet Control number of IP datagrams that local IP user protocols (including ICMP) supplied to IP in requests - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 35
IP datagrams for which no problem because all of its default gateways are down. IP fragments received that needed to be reassembled at this entity. Syntax Counter Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 36
IP reassembly algorithm (for example, timed out, and errors). This is not necessarily a count of discarded IP 17) The number of IP datagrams that have been (1.3.6.1.2.1.4.18) The number of IP datagrams that have been discarded because number of IP datagram fragments that have been generated - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 37
(1.3.6.1.2.1.4.20.1.3) The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to on this (logical) interface. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 37 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 38
table contains an entry for each route presently known to this entity. ipRouteDest (1.3.6.1.2.1.4.21.1.1) The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 39
Syntax INTEGER Access Read-write Status Mandatory Return value Writes not supported. ipRouteMetric2 (1.3.6.1.2.1.4.21.1.4) An alternate routing metric for this route. to -1. Syntax INTEGER HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 39 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 40
IP address on that interface. Syntax IpAddress Access Read-write Status Mandatory Return value Writes not supported . ipRouteType (1.3.6.1.2.1.4.21.1.8) The type of route. The values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP not supported. - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 41
Status Mandatory Return value Writes not supported. ipRouteInfo (1.3.6.1.2.1.4.21.1.13) A reference to MIB definitions specific to the particular routing this value. Syntax OBJECT IDENTIFIER HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 41 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 42
Mandatory The IP Address Translation table The IP address translation table Status Mandatory Return value Writes not supported. ipNetToMediaPhysAddress (1.3.6.1.2.1.4.22.1.2) The media-dependent Mandatory Return value Writes not supported. ipNetToMediaNetAddress (1.3.6.1.2.1.4.22.1.3) The IpAddress - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 43
Mandatory Return value Writes not supported. Additional IP objects Following are the additional IP objects. ipRoutingDiscards (1.3.6.1.2.1.4.23) errors (such as, bad ICMP checksums, bad length). HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 44
Time Exceeded messages received. Syntax Counter Access Read-only Status Mandatory icmpInParmProbs (1.3.6.1.2.1.5.5) The number of ICMP Parameter Problem messages received. Syntax Counter Access Read-only Status Mandatory icmpInSrcQuenchs (1.3.6.1.2.1.5.6) The number of ICMP Source Quench messages - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 45
messages received. Syntax Counter Access Read-only Status Mandatory icmpInTimestampReps (1.3.6.1.2.1.5.11) The number of ICMP Timestamp Reply messages received. Syntax Counter Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 45 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 46
) The number of ICMP messages that this entity did not send due to problems discovered within ICMP, such as a lack of buffers. This value should not include errors discovered outside the ICMP layer, such as the inability of IP to route the resulting datagram. In some implementations, there may be no - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 47
Mandatory icmpOutParmProbs (1.3.6.1.2.1.5.18) The number of ICMP Parameter Problem messages sent. Syntax Counter Access Read-only Status Mandatory Counter Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 47 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 48
sent. Syntax Counter Access Read-only Status Mandatory icmpOutAddrMasks (1.3.6.1.2.1.5.25) The number of ICMP Address Mask Request messages sent. Syntax Counter Access Read-only 48 MIB-II Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 49
example, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793. Syntax INTEGER HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 49 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 50
Status Mandatory tcpMaxConn (1.3.6.1.2.1.6.4) The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain LISTEN state from the SYN-RCVD state. Syntax Counter Access Read-only 50 MIB-II Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 51
total number of segments received, including those received in error. This count includes segments received on currently established connections one or more previously transmitted octets. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 51 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 52
Read-write Status Mandatory Return value Writes not supported. tcpConnLocalAddress (1.3.6.1.2.1.6.13.1.2) The local IP address for this TCP connection. In the case the listen state that is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used. Syntax - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 53
(1.3.6.1.2.1.6.13.1.4) The remote IP address for this TCP (1.3.6.1.2.1.6.14) The total number of segments received in error (for example, bad TCP checksums). Syntax Counter Access to UDP users. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 53 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 54
The UDP listener table contains information about this entity's UDP end-points on which a local application is currently accepting datagrams. udpLocalAddress (1.3.6.1.2.1.7.5.1.1) The local IP address for this UDP listener. In the case of a UDP listener that is willing to accept datagrams for any - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 55
be in error. Syntax Counter Access Read-only Status Mandatory egpOutMsgs (1.3.6.1.2.1.8.3) The total number of locally generated EGP messages. Syntax Counter Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 55 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 56
904. Syntax INTEGER Access Read-only Status Mandatory egpNeighAddr (1.3.6.1.2.1.8.5.1.2) The IP address of this entry's EGP neighbor. Syntax IpAddress Access Read-only egpNeighInMsgs (1.3.6.1.2.1.8.5.1.4) The number of EGP messages received without error from this EGP peer. 56 MIB-II Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 57
. Syntax Counter Access Read-only Status Mandatory egpNeighInErrMsgs (1.3.6.1.2.1.8.5.1.8) The number of EGP-defined error messages received from this EGP peer. Syntax Counter Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 57 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 58
Status Mandatory egpNeighOutErrMsgs (1.3.6.1.2.1.8.5.1.9) The number of EGP-defined error messages sent to this EGP peer. Syntax Counter Access Read-only Status Mandatory egpNeighStateUps in hundredths of a second. This represents the t3 timer as defined in RFC 904. 58 MIB-II Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 59
polling mode of this EGP entity, either active or passive. Syntax INTEGER { active(1), passive(2) } Access Read-only Status in the experimental portion of the MIB until they are proven. Then, HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 59 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 60
defined below are zero-valued in SNMP implementations that are optimized to support only the functions specific to either a management agent or a management passed from the SNMP protocol entity to the transport service. Syntax Counter Access Read-only Status Mandatory snmpInBadVersions MIB-II Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 61
SNMP protocol entity and for which the value of the error-status field is tooBig. Syntax Counter Access Read-only error-status field is NoSuchName. Syntax Counter Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 62
delivered to the SNMP protocol entity and for which the value of the error-status field is genErr. Syntax Counter Access Read-only Status Mandatory snmpInTotalReqVars (1.3.6.1.2.1.11.13) The total number of MIB objects retrieved successfully by the SNMP protocol entity as the result of receiving - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 63
snmpInGetResponses (1.3.6.1.2.1.11.18) The total number of SNMP GetResponse PDUs accepted and processed by the SNMP protocol entity. Syntax Counter Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 63 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 64
entity and for which the value of the error-status field is tooBig. Syntax Counter Access Read protocol entity and for which the value of the error-status is NoSuchName. Syntax Counter Access Read-only entity and for which the value of the error-status field is badValue. Syntax Counter Access Read - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 65
protocol entity. Syntax Counter Access Read-only Status Mandatory snmpOutTraps (1.3.6.1.2.1.11.29) The total number of SNMP Trap PDUs generated by the SNMP protocol entity. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 65 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 66
permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps returns enabled(1) if AuthFailureTrap = True, otherwise disabled(2). Writes not supported. 66 MIB-II Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 67
OCTET STRING (SIZE(3)) FcEventSeverity INTEGER { unknown(1) emergency(2) alert(3) critical(4) error(5) warning(6) notify (7) info(8) debug(9) mark(10) - All messages logged } HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 67 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 68
Table 3 FA-MIB textual substitutions (continued) Description Syntax FcUnitType INTEGER { unknown(1) other(2)-None of the following hub(3)- Passive connectivity unit supporting loop protocol switch(4)-Active connectivity unit supporting multiple protocols gateway(5)-Unit that converts not only - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 69
, 0400 for MIB revision 4.0) Connectivity USER). Syntax DisplayString Access Read-write Status Mandatory Return value The switch IP address. For example: http://10.0.0.1. Writes not supported HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 69 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 70
The sysUpTime timestamp at which the last configuration change occurred. connUnitTableChangeTime (1.3.6.1.3.94.1.5) The The objects described in this section are in a table format indexed by switch World Wide Name (WWN). An example of how to access one of Mandatory 70 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 71
Return value The number of ports on the switch. connUnitState (1.3.6.1.3.94.1.6.1.5) The operational state of the switch mapped. The overall state of the connectivity unit. Syntax INTEGER HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 71 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 72
or more cooling fan failed • Temperature status = Warm • Any port is down • Switch offline or in diagnostics mode failed(5) • Power supply is reporting bad and/or not also be read on the show setup snmp screen and written using the set setup snmp Telnet screen. 72 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 73
the 8/20q FC switch is HP StorageWorks 8/20q Fibre Channel Switch. The value for the SN600 FC switch is either HP StorageWorks SN6000 Stackable Dual Power Supply Fibre Channel Switch or HP StorageWorks SN6000 Stackable Single Power Supply Fibre Channel Switch. connUnitSn (1.3.6.1.3.94.1.6.1.8) The - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 74
value The switch IP address. For example: http://10.0.0.1. Writes not supported, returns NoSuchName. connUnitDomainId (1.3.6.1.3.94.1.6.1.11 The 24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading zeros if required. This should be set to the Fibre Channel address - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 75
HP StorageWorks 8/20q Fibre Channel Switch = 6, SN6000 Stackable Dual Power Supply FC Switch = 9, SN6000 Stackable Single Power Supply FC Switch error status NoSuchName. connUnitConfigurationChangeTime (1.3.6.1.3.94.1.6.1.16) The sysUpTime timestamp, in centiseconds, at which the last configuration - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 76
table. The revision numbers of all components of the switch. HP StorageWorks 8/20q Fibre Channel Switch = 3, SN6000 Stackable Dual Power Supply FC Switch = 3, SN6000 Stackable Single Power Supply FC Switch = 3. connUnitNumZones (1.3.6.1.3.94.1.6.1.18) Number of zones defined in connUnitZoneTable - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 77
Switch. The default for the SN6000 Fibre Channel Switch is SN6000 FC Switch. The default for the 8/20q Fibre Channel Switch is 8/20q FC Switch Warm Start are as defined in MIB-II and are not meant HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 78
6 connUnitContol read return values Switch setting Return value Online Offline Reset Offline Online Not supported connUnitContact (1.3.6.1.3.94.1.6.1.23) Contact Access Read-write Status Mandatory Return value The default is . The string size is Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 79
control write values Control value Result Emergency (2) Alert (3) Critical (4) Error (5) Warning (6) Notify (7) Info (8) Debug (9) Mark (10) defined in connUnitEventTable Syntax HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 79 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 80
equal to the connUnitGlobalID of the primary switch in a Fibre Channel fabric. Syntax FcGlobalId MaxAccess Read-only Status Mandatory Return value Returns the WWN of the principal switch followed by 8 bytes of zeros. For the number of link table entries for each switch 80 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 81
being examined and the number of blades installed. SNMP first reports the firmware revision and flasher shell version. It then iterates through each of the Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 81 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 82
values Table index 1 Return value Active firmware image 2 Flasher shell version values Table index 1 2 3 Return value Active firmware image Flasher shell version Hardware ASIC version Sensor six sensor items in each switch. An example of how to access one of these objects, given a WWN - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 83
sensor table index connUnitSensorName (1.3.6.1.3.94.1.8.1.3) A textual identification of the sensor intended primarily for operator use. Syntax DisplayString Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 83 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 84
connUnitSensorName return values. Table 12 ConnUnitSensorName return for for 8/20q FC Switch and SN6000 Single Power Supply FC Switch Table index Return value 1 Power Supply 1 Status 2 Temperature The sensor indicates failure } Access Read-only Status Mandatory 84 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 85
also provide more resolution on the sensor indication. For example: Cover temperature 1503K, above nominal operating range::= { connUnitSensorEntry 6 }. Syntax DisplayString Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 85 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 86
return values Sensor Temperature Fan Power Supply Voltage Return value Board(8) Fan(4) Power Supply(5) Board(8) connUnitSensorCharacteristic (1.3.6.1.3.94.1.8.1.8) The characteristics being monitored by this sensor 86 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 87
.0.144.167.0.0.0.0.0.0.0.0.1. connUnitPortUnitId (1.3.6.1.3.94.1.10.1.1) The connUnitId of the connectivity unit that contains this port. Syntax FcGlobalId Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 87 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 88
(1..2147483647) Access Read-only Status Mandatory Return value The index for each port on the switch = 1-8, 12, 16, 20, 24 (varies depending on number of licensed ports) (20)-Optical wave division multiplex ib 21)-Infiniband ipstore(22)-IP storage } Access Read-only 88 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 89
connUnitPortFCClassCap (1.3.6.1.3.94.1.10.1.4) Bit mask that specifies the classes of service capability of this port. If this is not applicable, returns Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 89 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 90
else returns 0x0d (Class f, Class 2, and Class 3). connUnitPortState (1.3.6.1.3.94.1.10.1.6) The user selected state of the port hardware Syntax INTEGER { unknown(1), online(2)-Available for meaningful work (9)-FCP offline status other(10)-Status not described above 90 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 91
return values SFP transmitter Return value Not Installed SL Unused(3) Shortwave(4) LC SN EL Other LL Longwave(5) LongwaveNoOFC(8) ShortwaveNoOFC(9) Copper(6) Unknown(1) HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 91 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 92
00 00 00 00. If a port is configured as a donor, the return value is 0. connUnitPortFCId (1.3.6.1.3.94.1.10.1.11) This is the assigned Fibre Channel ID of this port. This value is expected to If this port does not have a Fibre Channel address, returns all bits set to 1. 92 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 93
vendor, for example, for a GBIC. Syntax DisplayString (SIZE(0..79)) Access Read-only Status unsupported Return value The port vendor as reported by the SFP (if supported). HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 93 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 94
may choose not to allow any or all of these values on a SET. On a read, if you do not support write, then returns invalid(2). Otherwise, a read returns the last control operation attempted. Syntax INTEGER { unknown(1) invalid(2) resetConnUnitPort(3) bypassConnUnitPort(4) unbypassConnUnitPort - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 95
error returned connUnitPortName (1.3.6.1.3.94.1.10.1.17) A user-defined name for this port. This means that up to DisplayString characters may be supported objects of the connUnitLinkTable. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 95 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 96
of this port. If this is not applicable, returns all bits set to zero (0). The bits have the following definitions: unknown-0 Loop-1 Fabric-2 SCSI-4 TCP/IP-8 VI-16 FICON-32 Syntax OCTET STRING (SIZE (2)) Access Read-only Status Mandatory Return value Always returns 0x03 (Loop, Fabric) 96 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 97
Access Read-only Status unsupported Return value Always returns error status NoSuchName. connUnitPortNodeWwn (1.3.6.1.3.94.1.10.1.22) The activity (rx sync) } Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 98
If SyncStatus = SyncLost Other Return value Failed(2) NoMedia(7) Active(4) LinkDown(8) Unknown(1) Event table The objects described in FcGlobalId Access Read-only Status Mandatory Return value The WWN of the switch followed by 8 bytes of zeros. For example: 10 00 00 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 99
Access Read-only Status Deprecated Return value Unsupported. Always returns error status NoSuchName. connUnitREventTime (1.3.6.1.3.94.1.11.1.4) The real time when . Syntax connUnitSEventTime HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 99 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 100
value Always returns error status NoSuchName. connUnitEventType (1.3.6.1.3.94.1.11.1.7) The type of this event Syntax INTEGER { unknown(1) other(2) status(3) configuration(4) topology(5) } and connUnitStatus.connUnitId. Syntax OBJECT IDENTIFIER Access Read-only 100 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 101
Mandatory Return value Always returns error status NoSuchName connUnitEventDescr (1.3.6.1.3.94.1. switch followed by 8 bytes of zeros. For example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 102
Syntax OCTET STRING (SIZE(16)) Access Read-only Status Mandatory Return value The WWN of the local switch for each entry in the link table. For example: 10 00 00 C0 DD 00 71 C9 , otherwise 16 octets of binary 0" ::= { connUnitLinkEntry 5 }. Syntax connUnitLinkPortWwnX 102 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 103
only Status Mandatory Return value The remote port number for inter-switch link, if known. Otherwise, -1 (0xFFFFFFFF). connUnitLinkPortWwnY (1.3.6.1.3.94 each entry in the link table, if known HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 103 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 104
at a non-standard SNMP port. Syntax INTEGER Access Read-only Status Mandatory Return value Returns value of (0) connUnitLinkUnitTypeY (1.3.6.1.3.94.1.12.1.12) The type of the Fibre Channel connectivity unit as defined in connUnitType Syntax FcUnitType Access Read-only 104 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 105
(1.3.6.1.3.94.1.13.1.1) The unique table index for each zone. Valid values are between 1 and connUnit-ZoneSetNumZones. Syntax INTEGER (1..2147483647) Access Read-only Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 105 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 106
for each zone within the active zoneset. connUnitZoneMemberIndex (1.3.6.1.3.94.1.13.1.2) . connUnitZoneSetName (1.3.6.1.3.94.1.13.1.3) The name of the active zoneset to which the zone and zone member belong 13.1.4) The number of zones in the active zoneset Syntax INTEGER Access Read-only Status - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 107
the FC-GS-4 enhanced zone server. See FC-GS-4 draft standard for the details and format of the structure. Support of this object is optional. Syntax OCTET STRING (SIZE(80)) Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 107 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 108
value Not supported. Always returns SNMP error NoSuchName. zone member ID: 1-Port WWN 2-Domain & Port ID 3-FC Address 4-Node WWN 5-Alias Name 6--'FF'h - Vendor specified = 0x02 // Domain & Port ID FCaddress = 0x03 // FC Address [other] = 0xff // Vendor specific connUnitZoneMemberID (1.3.6.1.3.94.1.13 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 109
. Mapped as follows: WWN member-WWN (8 bytes) followed by 8 bytes of zeros FC address-FC address (3 bytes) followed by 13 bytes of zeros Domain/Port-Domain/Port address (2 Status Mandatory HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 109 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 110
number of members in a defined alias zone connUnitZoningAliasMemberIdType (1.3.6.1.3.94.1.14.1.6) The type of alias member ID: 1-Port WWN 2-Domain & Port ID 3-FC Address Others-reserved Syntax INTEGER Access Read-only Status Mandatory Return value Returns the alias member Id type. Mapped as follows - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 111
. Mapped as follows: WWN member-WWN (8 bytes) followed by 8 bytes of zeros FC address-FC address (3 bytes) followed by 13 bytes of zeros Domain/Port-Domain/Port address (2 Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 111 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 112
hexidecimal value indicating the total number of errors for a port. connUnitPortStatCountTxObjects (1.3.6.1.3.94.4.5.1.4) The number of frames/packets/IOs/etc transmitted by this port. A Fibre Channel frame starts with SOF and ends with EOF. Fibre Channel loop devices should not count frames passed - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 113
were full and outbound buffer-to-buffer credit transitioned to zero (0). There is no credit to provide to other side. This is a Fibre Channel statistic only. Syntax OCTET STRING (SIZE (8)) HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 113 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 114
frames (the frames that establish a connection). This is a Fibre Channel-only statistic. It is the sum of all classes. (the frames that establish a connection). This is a Fibre Channel-only statistic. It is the sum of all classes. If Fibre Channel-only statistic. Syntax OCTET STRING (SIZE (8)) - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 115
the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE (8)) HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 115 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 116
establish a connection). This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE was rejected by the fabric. This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE (8)) Access at the destination N_Port. This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE (8)) - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 117
destination N_Port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE (8)) HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 117 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 118
that was rejected by the fabric. This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE (8)) Access Read rejected at the destination N_Port. This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE (8)) Access this port. This is a Fibre Channel-only statistic. Syntax OCTET STRING - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 119
zero (0). connUnitPortStatCountTxMulticastObjects (1.3.6.1.3.94.4.5.1.30) The count of Multicast frames or packets transmitted out this port. Syntax OCTET STRING (SIZE (8)) Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 119 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 120
Link Resets. This is the number of Link Resets received. This is a Fibre Channel only statistic. Syntax OCTET STRING (SIZE (8)) Access Read-only Status Mandatory Return count of Link Resets. The number of Link Resets transmitted. This is a Fibre Channel-only statistic. 120 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 121
by this port. This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE (8)) Access Read-only Status Mandatory Return value The total number of TxOfflineSeqs transmitted by a port. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 121 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 122
(1.3.6.1.3.94.4.5.1.41) The count of invalid transmission words received at this port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE (8)) Access Read-only 122 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 123
(1.3.6.1.3.94.4.5.1.45) The count of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel-only statistic. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 123 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 124
FLOGI/PLOGI. This could be caused by losing the end of frame delimiter. This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE (8)) Access Read-only Status Mandatory Return value Unsupported. Always OCTET STRING (SIZE (8)) Access Read-only Status Mandatory 124 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 125
(1.3.6.1.3.94.4.5.1.50) The count of disparity errors received at this port. This is a Fibre Channel-only statistic. Syntax OCTET STRING (SIZE the table. Syntax INTEGER MaxAccess Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 125 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 126
Name Server (SNS) for all switches. connUnitSnsId (1.3.6.1.3.94.5.2.1.1.1) The connUnitId of Read-only Status Mandatory Return value Returns the WWN of the switch followed by 8 bytes of zeros. For example: 10 00 Status Mandatory Return value The 24-bit Fibre Channel address for each entry in the SNS - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 127
device in the SNS table connUnitSnsClassOfSvc (1.3.6.1.3.94.5.2.1.1.6) The classes of service offered by this entry in the SNS table Syntax OCTET value The switch IP address in IPv6 format HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 127 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 128
Read-only Status Mandatory Return value Unsupported. Always returns error status NoSuchName. connUnitSnsFC4Type (1.3.6.1.3.94.5.2.1.1.9) The FC-4 types supported by this entry in the SNS table Syntax OCTET STRING type N NL F/NL NX Return value (hexidecimal) 1 2 3 7F 128 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 129
Status Mandatory Return value Unsupported. Always returns error status NoSuchName. connUnitSnsSymbolicPortName (1.3.6.1.3.94.5.2.1.1.14) The symbolic port name of this entry in the SNS table HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 129 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 130
platform entries that are registered with the platform registry service. The Platform table, which shows the attributes and the fabric configuration server defined in the FC-GS-3 standard and enhanced platform attributes proposed for FC-GS-4. error status NoSuchName. 130 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 131
Return value Unsupported. Always returns error status NoSuchName. connUnitPlatformNodeIndex (1.3.6.1.3.94.5.2.2.1.2) FC-GS-4 draft standard. Syntax OCTET STRING (SIZE(79)) Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 132
. Always returns error status NoSuchName. connUnitPlatformLabel Return value Unsupported. Always returns error status NoSuchName. connUnitPlatformDescription (1.3.6.1.3.94.5.2.2.1.8) Return value Unsupported. Always returns error status NoSuchName. connUnitPlatformLocation (1.3.6.1.3.94.5.2.2.1.9) - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 133
(1.3.6.1.3.94.5.2.2.1.12) The WWN of the node contained by the platform. Syntax FcGlobalId Access Read-only Status Read-only Return value Unsupported. Always returns error status NoSuchName. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 133 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 134
one of these objects, given an IP address of 10.32.165.4, is: snmpget localhost public fcmgmt.trapReg.trapRegTable.trapRegEntry.trapRegFilter.10.32.165.4.162. A trap event is reported when the incoming error has a severity level less than or equal to the configured severity level. The trap event - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 135
when they occur. The port number can be configured in the switch SNMP setup parameters. The default is 162. trapRegFilter (1.3.6.1.3.94.2.3.1.3) Defines the trap • READ: Can never happen. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 135 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 136
new row is created. The values of the optional columns are set to default values. Traps are not enabled to be sent to the target. If ) is alert. Sent whenever a Switch.OperChange or Switch.StateChange event occurs. Variables: { connUnitEventObject, connUnitEventDescr } 136 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 137
Module Addr Descr The number that identifies the event The event counter The switch on which the event occurred The I/O blade on which the event occurred The description of the event HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 137 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 138
connUnitEventTrap User port config change User port state change E_Port alarm Fabric change and unit deleted Switch state change Switch reset .PsOkAlarm Chassis.FanBadAlarm Chassis.FanOkAlarm Blade.OverheatAlarm Blade.OverwarmAlarm Variables: { connUnitSensorStatus } 138 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 139
in an agent role, is reinitializing itself and that its configuration may have been altered. authenticationFailure An authenticationFailure trap signifies that the not this trap is generated. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 139 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 140
140 Fibre Alliance MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 141
MIB) on the HP StorageWorks SN6000 and 8/20q Fibre Channel Switch. Fibre Channel FE-MIB definitions The textual substitutions in Table 31 are specific to the FE-MIB class5(5) class6(6) } HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 141 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 142
FE-MIB textual configuration and service parameters of the Fabric Element and the FxPort(s). The group represents a set of parameters associated with the Fabric Element or an FxPort to support the principal switch; for example, 10 00 00 C0 DD 00 71 C2. Writes are not supported. fcFeElementName - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 143
value A configuration description of the module table entry. The value for the 8/20q FC switch is HP StorageWorks 8/20q Fibre Channel Switch. The value for the SN600 FC switch is either HP StorageWorks SN6000 Stackable Dual Power Supply Fibre Channel Switch or HP StorageWorks SN6000 Stackable Single - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 144
is 1.3.6.1.4.1.3873.1.25. The module identification number for the SN6000 Stackable Single Power Supply FC switch is 1.3.6.1.4.1.3873.1.24. fcFeModuleOperStatus (1.3.6.1.2.1.75.1.1.4.1.4) The switch definitions map 1-to-1 with the MIB definitions. This object indicates the operational status of the - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 145
error configuration parameters of the ports. fcFxPortName (1.3.6.1.2.1.75.1.1.5.1.2) The WWN of this FxPort. Each FxPort has a unique port WWN within the fabric. Syntax FcNameId Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 146
on switch. For example, the return value for port #2 would be 20 02 00 C0 DD 00 71 C9, and the return value for port #14 would be 20 0E 00 C0 DD 00 71 C9. fcFxPortFcphVersionHigh (1.3.6.1.2.1.75.1.1.5.1.3) The highest or most recent version of FC-PH that the FxPort is configured to support - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 147
value The default is 2000 (0x7D0). fcFxPortCosSupported (1.3.6.1.2.1.75.1.1.5.1.9) A value indicating the set of classes of service supported by the FxPort. Syntax FcCosCap Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 147 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 148
75.1.1.5.1.11) A value indicating the mode of Stacked Connect supported by the FxPort. Syntax FcStackedConnMode Access Read-only Status Current .1.1.5.1.13) A flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort. Syntax TruthValue Access 148 Fabric Element MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 149
0 means that the FxPort does not support this parameter. Syntax MicroSeconds Access Read-only Status Current Return value The default ED_TOV parameter is 2000 (0x7D0). The Read-only Status HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 149 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 150
Unsupported. Always returns error status NoSuchName. fcFxPortOperMode error status NoSuchName. FxPort Physical Level table The objects described in this section are in table format, indexed by switch either explicit management action or per-configuration information accessible to the Fabric Element, - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 151
. Syntax INTEGER { online(1)-Login may proceed offline(2)-Login cannot proceed testing(3)-Port is under test linkFailure(4)-Failure after online/testing } Access Read-only Status Current HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 151 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 152
error default RT_TOV parameter is 100 (0x64). This is a global setting for the switch service parameters that have been established from the most recent Fabric Login (implicit or explicit). fcFxPortFcphVersionAgreed (1.3.6.1.2.1.75.1.2.3.1.2) The version of FC-PH that the FxPort has agreed to support - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 153
indicating that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request. Syntax FcCosCap Access Read-only Status Current HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 153 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 154
valid if Class 1 service is supported. Syntax TruthValue Access Read support stacked connect from the Fabric Login. This is only meaningful if the ports are using Class 1 service support Class 2 sequential delivery from the Fabric Login. This is only meaningful if the ports are using Class 2 service - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 155
agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if the ports are using Class 3 service. Syntax TruthValue by the FxPort. Syntax FcBbCreditModel HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 155 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 156
Status Current Return value Returns alternate(2). Writes not supported. The Error group The objects described in this section are in table format, indexed by switch index and port index. An example of how signals detected by the FxPort Syntax Counter32 Access Read-only 156 Fabric Element MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 157
value The total number of InvalidCRCs encountered for the port fcFxPortDelimiterErrors (1.3.6.1.2.1.75.1.3.1.1.7) The number of delimiter errors detected by this FxPort Syntax Counter32 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 157 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 158
Current Return value Unsupported. Always returns error status NoSuchName. fcFxPortAddressIdErrors (1.3.6.1.2.1.75.1.3.1.1.8) The number of address identifier errors detected by this FxPort Syntax Counter32 Access The number of Offline Sequences received by this FxPort 158 Fabric Element MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 159
error status NoSuchName. fcFxPortC1OutFrames (1.3.6.1.2.1.75.1.4.1.1.2) The number of Class 1 frames (other than Class 1 connectrequest) delivered through this FxPort to its attached NxPort. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 160
value Unsupported. Always returns error status NoSuchName. fcFxPortC1InOctets (1.3.6.1.2.1.75 Return value Unsupported. Always returns error status NoSuchName. fcFxPortC1OutOctets (1.3.6.1.2.1.75.1.4.1.1.4) value Unsupported. Always returns error status NoSuchName. fcFxPortC1Discards (1.3.6.1.2.1.75 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 161
-only Status Current Return value Unsupported. Always returns error status NoSuchName. fcFxPortC1FrjtFrames (1.3.6.1.2.1.75.1.4.1.1.7) The number of F_RJT . Syntax Counter32 Access Read-only HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 161 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 162
Current Return value Unsupported. Always returns error status NoSuchName. Class 2 Accounting table The objects described in this section are in table format, indexed by switch index and port index. An example NxPort. Syntax Counter32 Access Read-only Status Current 162 Fabric Element MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 163
Return value The total number of Class2Toss discarded by the port. fcFxPortC2FbsyFrames (1.3.6.1.2.1.75.1.4.2.1.6) The number of F_BSY frames generated by this FxPort. Syntax Counter32 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 163 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 164
frames. Class 3 Accounting table The objects described in this section are in table format, indexed by switch index and port index. An example of how to access one of these objects is: snmpget localhost public NxPort. Syntax Counter32 Access Read-only Status Current 164 Fabric Element MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 165
section are in table format, indexed by switch index and port index. An example of how supporting. A capability may be used as expressed in its respective object value in the Configuration group. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 166
FC-PH that the FxPort is capable of supporting. Syntax FcphVersion Access Read-only Status Current Return value Always returns 32 (0x20) fcFxPortCapFcphVersionLow (1.3.6.1.2.1.75.1.5.1.1.2) The lowest or earliest version of FC -PH that the FxPort is capable of supporting value The default is 255 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 167
Return value The default is 0 ( supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 168
that the FxPort is capable of supporting. Syntax FcStackedConnMode Access Read-only or not the FxPort is capable of supporting Class 2 sequential delivery. Syntax TruthValue Access indicating whether or not the FxPort is capable of supporting Class 3 sequential delivery. Syntax TruthValue Access Read - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 169
75.1.5.1.1.13) The minimum holding time that the FxPort is capable of supporting, in microseconds. Syntax MicroSeconds Access Read-only Status Current Return value Returns the value 10 (0x0A) HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 169 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 170
170 Fabric Element MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 171
Enterprise MIB definitions This MIB replaces the fcFxPortPhystable module defined in FIBRE-CHANNEL-FE-MIB, and defines volatile control objects for ports in an SN6000 or 8/20q Fibre Channel Switch. If the switch gets reset, these values revert back to the default values in the configuration file - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 172
communication links has entered the online state from some other state. The current state is indicated by the included value of fcQxPortPhysOperStatus. 172 Private Enterprise MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 173
Variables: { fcQxPortPhysAdminStatus, fcQxPortPhysOperStatus } qlconnUnitAddedTrap (qLogicExperimental 0 12) A connUnit has been added to this agent. Variables: { connUnitId } HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 173 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 174
174 Private Enterprise MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 175
for the Firmware Download-Management Information Base (FD-MIB) on the HP StorageWorks SN6000 and 8/20q Fibre Channel Switch. Firmware download MIB definitions The FD-MIB enables you to download, install, and activate new firmware on an HP StorageWorks SN6000 or 8/20q Fibre Channel Switch using the - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 176
used to transfer the firmware file. The default is 69. Syntax INTEGER Access Read-write Status Current qlgcChFwDwldPathName (1.3.6.1.4.1.3873.3.1.1.2.6) The full directory name on the server where the firmware file is located. If the firmware file to be downloaded is in a subdirectory, setting - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 177
.3.1.1.2.8) The value for the type of reset (hot reset or hard reset) Syntax INTEGER { (1)-Normal (disruptive) (2)-NDCLA (Non-Disruptive Code Load Activation) Access Read-write Status Current HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 177 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 178
178 Firmware Download MIB Objects - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 179
in damage to equipment or data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints and shortcuts. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 179 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 180
Suite User Guide • HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message Reference Guide • HP StorageWorks 8/20q and SN6000 Fibre Channel Switch CIM Agent Reference Guide For the latest product information, including firmware, documentation, and supported SAN configurations, see - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 181
. For more information about the HP Customer Self Repair program, contact your local service provider. For the North American program, visit the HP website (http://www.hp.com/go/selfrepair). HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 181 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 182
182 Support and Other Resources - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 183
118 connUnitPortStatCountClass2RxFrames 117 connUnitPortStatCountClass2TxFrames 117 connUnitPortStatCountClass3Discards 119 connUnitPortStatCountClass3RxFrames 118 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 183 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 184
110 connUnitZoningAliasMemberIndex 109 connUnitZoningAliasName 110 connUnitZoningAliasNumAliases 109 connUnitZoningAliasNumMembers 110 conventions document 179 text symbols 179 D document conventions 179 documentation, HP website 180 E EGP group 55 EGP Neighbor table 56 egpAs 59 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 185
55 Error group 156 Event table 98 F FA-MIB definitions MIB 175 Firmware Download MIB definitions 175 Fx Port Fabric Login table 152 FxPort configuration table 145 FxPort Physical Level table 150 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 186
180, 181 HP storage website 181 Subscriber's choice website 180 technical support 180 I table 26 IP Address table 37 IP Address Translation table 42 IP group 32 IP Routing table 16 manager 15 maximum SNMP message size 16 MIB-II group 23 MIB-II groups 23 MIBs 16 minimum receive packet size for SNMP 16 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 187
Set Switch Admin Password 21 Set Switch IP Address 21 Set Switch SNMP Properties 21 Simple Name Server table 125 Simple Network Management Protocol 15 SMI 16 54 udpLocalPort 55 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 187 - HP SN6000 | HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network - Page 188
udpNoPorts 54 udpOutDatagrams 54 uNumber 69 W websites HP documentation 180 HP storage 181 HP Subscriber's choice 180 Z Zone table 105 Zoning alias table 109 188
HP StorageWorks
8/20q and SN6000 Fibre Channel Switch
Simple Network Management Protocol
Reference Guide
This Simple Network Management Protocol Reference Guide describes how to use SNMP to manage and monitor the HP
StorageWorks SN6000 and 8/20q Switch products. It is intended for users responsible for supporting SNMP and
SN6000 and 8/20q Fibre Channel Switch configurations.
Part Number: 5697-0409
Published June 2010
Edition: 2