HP SN6000C Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1
HP SN6000C Manual
View all HP SN6000C manuals
Add to My Manuals
Save this manual to your list of manuals |
HP SN6000C manual content summary:
- HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 1
release notes. Removed the Limitation "Upgrading an MDS 9222i Switch with an Active FC-Redirect Configuration." Added DDTS CSCsy37951. Added Oracle 11g Enterprise Edition and Oracle 10g Enterprise Edition to the list of software supported by Cisco Fabric Manager and Device Manager, in the "Upgrading - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 2
38 • Caveats, page 45 • Related Documentation, page 52 • Obtaining Documentation and Submitting a Service Request, page 53 Introduction The Cisco MDS 9000 Family of Multilayer Directors and Fabric Switches provides industry-leading availability, scalability, security, and management, allowing you to - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 3
part numbers and hardware components supported by the Cisco MDS 9000 Family. Note To use the Cisco Storage Services Enabler package, Cisco MDS SAN-OS Release 1.3(5) or later must be installed on the MDS switch. Table 2 Cisco MDS 9000 Family Supported Software and Hardware Components Component - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 4
MDS 9000 Family Switching and Services modules) MDS 9216i Switch Cisco MDS 9134 34-Port Multilayer Fabric Switch (1RU MDS 9134 Switch fixed-configuration multilayer fabric switch with 32 4-Gbps and 2 10-Gbps Fibre Channel ports) Cisco MDS 9124 24-Port Multilayer Fabric Switch (1RU MDS 9124 Switch - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 5
MDS 9500 Series MDs 9216i Switch Cisco MDS 9000 32-Port Storage Services Module - 32-port, 2-Gbps storage services module with SFP LC connectors MDS 9500 Series MDs 9200 Series Cisco MDS 9513 Switching Fabric1 Module MDS 9513 Switch Cisco MDS 9513 Switching Fabric2 Module MDS 9513 Switch - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 6
reach (40 MDS 9500 Series km) MDS 9200 Series MDS 9134 Switch X2 SC optics, 10-Gbps Fibre Channel over copper MDS 9500 Series MDS 9200 Series MDS 9134 Switch X2 SC optics, 10-Gbps Ethernet for short reach MDS 9500 Series MDS 9200 Series Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 7
Series switching modules SFP optics (LC type) for 1- or 2-Gbps Fibre Channel for shortwave mode; not supported for use in 4-Gbps-capable ports MDS 9000 Series SFP optics (LC type) for 1- or 2-Gbps Fibre Channel for MDS 9000 Series longwave mode for Cisco MDS 9500, MDS 9200, and MDS 9100 Series - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 8
power supply 300W AC power supply MDS 9100 Series MDS 9124 Switch DS-CAC-845W 845W AC power supply for Cisco MDS 9200 Series MDS9200 Series DS-CAC-3000W 3000W AC power supply for Cisco MDS 9509 MDS 9509 Switch DS-CAC-2500W 2500W AC power supply MDS 9509 Switch DS-CDC-2500W 2500W DC power - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 9
the MDS hardware chassis supported by Cisco MDS NX-OS 4.x. Table 3 Cisco MDS NX-OS 4.x Chassis Support Matrix Switch MDS 9513 MDS 9509 MDS 9506 MDS 9222i MDS 9216i MDS 9216A MDS 9216 MDS 9134 MD S 9124 MDS 9140 MDS 9120 Cisco Fabric Switch for HP c-Class BladeSystem and Cisco Fabric Switch for - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 10
Gbps IP Switching Module 1. Requires DS-13SLT-FAB2 in the MDS 9513. MDS 9500 Series MDS 9222i MDS 9216i Yes No Yes Yes No Yes Yes Yes Yes No No No No No No Table 5 lists the MDS hardware modules supported by Cisco MDS SAN-OS 3.x. Table 5 Module Support Matrix for Cisco MDS SAN-OS - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 11
Switching Module 4-port 1-, 2-Gbps IP Switching Module MDS 9500 Series Yes Yes MDS 9222i No Yes MDS 9216i Yes Yes MDS 9216A Yes Yes MDS 9216 Yes Yes Migrating from Supervisor-1 Modules to Supervisor-2 Modules As of Cisco MDS SAN-OS Release 3.0(1), the Cisco MDS 9509 and 9506 Directors support - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 12
upgrade your Cisco MDS 9000 switch. Issuing the install all command from the CLI, or using Fabric Manager to perform the downgrade, enables the compatibility check. The check indicates if the upgrade can happen nondisruptively or disruptively depending on the current configuration of your switch and - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 13
for an MDS 9100 series switch depends on which switch you use, as shown in Table 6. Table 6 Software Images for MDS 9100 Series Switches Cisco MDS 9100 Series Switch Type Supervisor Module Type 9124, 9134, Cisco Fabric Switch for HP c-Class BladeSystem, Cisco Fabric Switch for IBM BladeCenter - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 14
process that involves installing a database, as well as Fabric Manager. The complete installation instructions are provided in the "Installation of Cisco MDS NX-OS and Fabric Manager" section in the Cisco MDS 9000 Family Fabric Manager Configuration Guide, and are available on-screen once you launch - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 15
been tested with Cisco Fabric Manager. See Table 9 for the supported upgrade paths for Cisco Fabric Manager. Step 1 Verify supported software. Cisco Fabric Manager and Device Manager have been tested with the following software: OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 16
database, follow the instructions in the "Installation of Cisco MDS SAN-OS and Fabric Manager" section in the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Refer to Table 9 for information on the supported upgrade path. Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 17
user name and password before continuing with the Fabric Manager installation. We Fabric Manager Server. Step 1 Step 2 Open a command-line prompt: Start > Run, then type cmd and press Return. At the command prompt type: user /install. OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 18
page 15 for the list of supported software that has been tested with Cisco Fabric Manager. See Table 9 for the supported upgrade paths for Fabric Manager. To install Device Manager on your workstation, follow these steps: Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 18 - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 19
switch in the Address field of your browser. Click the Cisco Device Manager link in the Device Manager installation window. Click Next to begin the installation. Follow the onscreen instructions have this problem, save Cisco MDS NX-OS Release 4.1(x): • Install and configure services traffic - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 20
SSM On an MDS 9222i switch, if SANTap or Invista is provisioned on a Storage Services Module (SSM) in slot 2, then an In Service Software Upgrade (ISSU) to NX-OS Release 4.1(3a) is not supported. The upgrade to NX-OS Release 4.1(3a) is supported if you set boot variables, save the configuration, and - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 21
-OS Software Image Send documentation comments to mdsfeedback-doc.com. Table 10 Nondisruptive Upgrade Path to Cisco MDS NX-OS Release 4.1(3a) Current Nondisruptive Upgrade Path NX-OS 4.1(1c) You can nondisruptively upgrade directly to NX-OS Release 4.1(3a) NX-OS 4.1(1b) You - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 22
NX-OS Software Image Send documentation comments to mdsfeedback-doc.com. Table 10 Nondisruptive Upgrade Path to Cisco MDS NX-OS Release 4.1(3a) (continued) Current Nondisruptive Upgrade Path SAN-OS 2.1(1b) Upgrade to SAN-OS Release 2.1(2b), then upgrade to Release 3.3(x), and then upgrade - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 23
upgrading to Release 2.0(2b) and then upgrade to 1.3(4a). Upgrading with IVR Enabled An Inter-Switch Link (ISL) flap resulting in fabric segmentation or a merge during or after an upgrade from Cisco MDS SAN-OS Release 2.0(x) to a later image where IVR is enabled might be disruptive. Some possible - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 24
in the "Upgrading Your Version of Cisco Fabric Manager" section on page 14. configuration on all of the switches. Follow the normal upgrade guidelines for Release 2.1(2b). If you are adding new switches running Cisco MDS SAN-OS Release 2.1(2b) or later, upgrade all of your existing switches to Cisco - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 25
3.3(1c) to NX-OS Release 4.1(3a). For more information on upgrading SAN-OS software, see the "Upgrading Your Cisco MDS NX-OS Software Image" section on page 14. If the configuration is not updated before the upgrade, the installation process for the new image will automatically convert all ports - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 26
on the switch to a release version supported by your Cisco SAN-OS release. Refer to the Cisco MDS NX-OS Release Compatibility Matrix for Storage Service Interface Images. - All SSM applications are disabled. Use the show ssm provisioning command to determine what applications are configured. Use the - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 27
either Fabric Manager or the copy command. If the switch fails to boot, then follow the recovery procedure described in the "Troubleshooting Installs, Upgrades, and Reboots" section of the Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x. Upgrading a Cisco MDS 9124 or Cisco MDS 9134 Switch - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 28
When the ASCII startup configuration file is applied, there may be errors. Because of this, we recommend that you follow the nondisruptive upgrade path. Note You cannot upgrade an MDS 9120 switch or an MDS 9140 switch to Cisco NX-OS 4.x. See Table 3 for the list of switches that support Cisco NX-OS - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 29
from Cisco SAN-OS Release 2.1.(1a), 2.1(1b), or 2.1.(2a). See the "Upgrading with IVR Enabled" section on page 23 for these instructions. - supported on MDS switches, when FC-Redirect based applications, such as Data Mobility Manager or Storage Media Encryption, are configured in the fabric - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 30
Downgrading Your Cisco MDS SAN-OS Software Image Send documentation comments to mdsfeedback-doc.com. Table 12 to SAN-OS Release 3.3(x) first, then to Release 2.1(2x), and then downgrade to Release 2.0(2b). Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 30 OL-17675-05 - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 31
Downgrading Your Cisco MDS SAN-OS Software Image Send documentation comments to mdsfeedback-doc.com. Table 12 Nondisruptive before nondisruptively downgrading to Release 2.0(2b) and then downgrade to 1.3(4a). OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 31 - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 32
information about the features listed, refer to the Cisco MDS 9000 Family CLI Configuration Guide, the Cisco MDS 9000 Family Fabric Manager Configuration Guide, and the Cisco MDS 9000 Family Storage Media Encryption Configuration Guide. For information about new commands associated with these - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 33
Manager Enhancements, page 34 - Cisco Data Mobility Manager Method 3, page 34 - Support for DMM on the MDS 9222i Switch, page 34 • Cisco Storage Media Encryption Enhancements, page 34 - Media Key Auto-replication, page 34 - High Availability KMC, page 35 • Cisco Fabric Manager Release 4.1(3a) New - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 34
where there is a Dual Fabric SAN for server-to-storage Fibre Channel traffic and a third SAN (or VSAN) for migration traffic. DMM Method 3 is available only on the MDS 900018/4-Port Multiservice Module (MSM-18/4). Support for DMM on the MDS 9222i Switch Starting with Cisco NX-OS Release 4.1(3a - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 35
Features in Cisco MDS NX-OS Release 4.1(3a) Send documentation comments to mdsfeedback-doc.com. High Availability KMC Enhancements in Cisco NX-OS Release 4.1(3a) enable the KMC to be used in high availability environments where unattended operation is a requirement. The KMC can be configured to use - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 36
NX-OS Release 4.1(3a) is the last release to support Fabric Manager Solaris 8 and Red Hat Enterprise AS4 Linux. Licensed Cisco NX-OS Software Packages Most Cisco MDS 9000 family software features are included in the base configuration of the switch: the standard package. However, some features are - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 37
with the Cisco MDS 9000 family provide basic configuration and troubleshooting capabilities. The Cisco MDS 9000 FMS package extends Cisco Fabric Manager by providing historical performance monitoring for network traffic hotspot analysis, centralized management services, and advanced application - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 38
fabric support, and management using Cisco Fabric Manager provide a complete solution that greatly simplifies and eliminates most downtime associated with data migration. Refer to the Cisco MDS on Cisco MDS switches supports one user-configured IPv6 address, but does not support auto-configuration of - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 39
1 Module Limitation When a Cisco or other vendor switch port is connected to a Generation 1 module port (ISL connection), the receive buffer-to-buffer credit of the port connected to a Generation 1 module port should not exceed 255. Schedule Job Configurations As of MDS NX-OS Release 4.1(1b - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 40
supported, including IVR zones, in the active zone set is 2047. InterVSAN Routing When using InterVSAN Routing (IVR), it is recommended to enable Cisco Fabric Services (CFS) on all IVR-enabled switches configuration Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 40 OL-17675- - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 41
Version, page 41 Cisco SME Configuration Limits Table 14 lists the Cisco SME configuration limits for this release. Table 14 Cisco SME Limits Configuration Number of switches in the fabric Number of clusters per switch Switches in a cluster Fabrics in a cluster Modules in a switch Cisco MSM-18 - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 42
Gigabit Ethernet interfaces on the MSM-18/4 module or module 1 of the MDS 9222i switch, even though it is visible on these modules. The feature is not configured CallHome commands: switch# show running-config callhome > version 4.1(3) > callhome > email-contact [email protected] - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 43
, Cisco MDS 9216i Multilayer Fabric Switch • DS-X9016, Cisco MDS 9000 2-Gbps16-Port Fibre Channel Switching Module • DS-X9032, Cisco MDS 9000 2-Gbps 32-Port Fibre Channel Switching Module • DS-X9032-14K9, Cisco MDS 9000 14/2-Port Multiprotocol Services Module (MPS-14/2) For configuration information - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 44
Services (FC-LS) and Fibre Channel Switch Fabric Generation 4 (FC-SW-4) standards). Vendor specific. Do not use as a Virtual Fabric Identifier. Applying Zone Configurations to VSAN 1 In the setup script, you can configure Cisco MDS 9000 18/4-Port Multiservice Module (MSM-18/4) does not support - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 45
Software Release (Open or Resolved) 4.1(3a) O R O R O R O R O R O R O R O R O O O R O O O R O R O R O R O R O R O R O R O R O R O O O R O R O R O R O R O R OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 45 - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 46
R R O O O Resolved Caveats • CSCsi72048 Symptom: FCIP links may fail on an MDS 9216i switch that has compression set to auto when the other end of the FCIP link is terminated by Cisco Fabric Manager" is created on the desktop. Then, using Fabric Manager Web Client again, you download another Fabric - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 47
Symptom: During an upgrade from Cisco MDS SAN-OS Release 3.3(1c) to Cisco NX-OS 4.1(1b) and later, applications might experience a very small amount of packet drops in the fabric. Most of the applications should be able to recover from such a small packet loss. The problem is seen only with an - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 48
commands are available. When upgrading to Cisco SAN-OS 3.2(1c) from a earlier version, the scheduler is enabled by default. Workaround: This issue is resolved. • CSCsu42003 Symptom: When an FCIP tunnel is configured with IPsec between an MDS 9222i switch and an MDS 9216i switch, it fails to come up - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 49
Caveats Send documentation comments to mdsfeedback-doc.com. Workaround: This issue is resolved. • CSCsu84511 Symptom: When a Cisco MDS switch is configured to use an AAA server using TACACS+ and with enabling the directed request option, a login using @ provides the network-operator - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 50
the interface and zone configurations that are in an area below the DMM job configuration in the ASCII text file. The configurations stored in the ASCII text file are replayed sequentially from top to bottom. Workaround: None. Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 51
a nondisruptive downgrade, even though the fport-channel-trunk feature is not supported in NX-OS 4.1(1x) releases. As a result, the switch is in an inconsistent state after the downgrade. Workaround: None. OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 51 - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 52
Guide • Cisco MDS 9100 Series Hardware Installation Guide • Cisco MDS 9124 Multilayer Fabric Switch Quick Start Guide • Cisco MDS 9020 Fabric Switch Hardware Installation Guide Cisco Fabric Manager • Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide • Cisco MDS 9000 Family Fabric - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 53
Configuration Guide • Cisco MDS 9000 Family Secure Erase Configuration Guide - For Cisco MDS 9500 and 9200 Series Troubleshooting and Reference • Cisco MDS 9000 Family Troubleshooting Guide • Cisco MDS 9000 Family MIB Quick Reference • Cisco MDS 9020 Fabric Switch MIB Quick Reference • Cisco MDS - HP SN6000C | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1 - Page 54
desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. This document is to be used in conjunction and coincidental. © 2009 Cisco Systems, Inc. All rights reserved. Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a)
Send documentation comments to mdsfeedback-doc.com.
Americas Headquarters:
© 2009 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706
USA
Cisco MDS 9000 Family Release Notes
for Cisco MDS NX-OS Release 4.1(3a)
Release Date: March 11, 2009
Part Number: OL-17675-05 E0
This document describes the caveats and limitations for switches in the Cisco MDS 9000 Family. Use
this document in conjunction with documents listed in the
“Related Documentation” section on page 52
.
Note
Release notes are sometimes updated with new information on restrictions and caveats. Refer to the
following website for the most recent version of the
Cisco MDS 9000 Family Release Notes
:
Table 1
shows the on-line change history for this document.
Contents
This document includes the following:
Table 1
Online History Change
Revision
Date
Description
A0
03/11/2009
Created release notes.
B0
03/13/2009
Removed the Limitation “Upgrading an MDS 9222i Switch
with an Active FC-Redirect Configuration.”
C0
03/16/2009
Added DDTS
CSCsy37951
.
Added Oracle 11g Enterprise Edition and Oracle 10g
Enterprise Edition to the list of software supported by Cisco
Fabric Manager and Device Manager, in the
“Upgrading Your
Version of Cisco Fabric Manager”
section.
D0
03/18/2009
Added DDTS
CSCsu23984
.
E0
03/19/2009
Added DDTS
CSCsy52780
.