HP Scitex FB750 Site Preparation Guide

HP Scitex FB750 Manual

Get HP Scitex FB750 PDF manuals and user guides View all HP Scitex FB750 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Scitex FB750 manual content summary:

  • HP Scitex FB750 | Site Preparation Guide - Page 1
    Scitex FB550 and FB750 Printers Site Preparation Guide
  • HP Scitex FB750 | Site Preparation Guide - Page 2
    to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors
  • HP Scitex FB750 | Site Preparation Guide - Page 3
    specifies how to prepare the customer site to receive the printer. Safety hazard warning conventions The safety hazard warning conventions used in this guide are classified into the following categories: Warning and Caution. WARNING! Warning is used to identify conditions or actions for which there
  • HP Scitex FB750 | Site Preparation Guide - Page 4
    iv Using this guide ENWW
  • HP Scitex FB750 | Site Preparation Guide - Page 5
    ...10 Receiving logistics ...10 Receiving dock and fork lift required 10 Building interior clearances required 10 Packaging ...11 3 Customer Care ...12 HP Customer Care ...12 North America ...12 Europe, Middle East, and Africa ...12 Asia and Pacific ...12 Latin America ...12 4 Specifications ...14
  • HP Scitex FB750 | Site Preparation Guide - Page 6
    Power specifications ...16 Environmental specifications ...18 vi ENWW
  • HP Scitex FB750 | Site Preparation Guide - Page 7
    : print head assembly, print head carriage, and ink supply. Ink cartridges are not included with the printer. They must be ordered and purchased separately. Printing with white ink requires the optional HP Scitex FB550 White Ink Upgrade Kit, part number CQ118A. ● Mechanical module - components that
  • HP Scitex FB750 | Site Preparation Guide - Page 8
    HP UV-curable inks used with the printer. Special ventilation equipment installation is at the discretion of the customer; no specific HP BATTERY IS INCORRECTLY REPLACED. The battery must be replaced only by authorized service providers, and must be replaced only with the same or equivalent type.
  • HP Scitex FB750 | Site Preparation Guide - Page 9
    . The electronic control components are powered with a single-phase line that can be used with a UPS. HP highly recommends that you use a UPS to ensure that the AC input power to the printer is continuously within specifications. The UPS must be a single-phase UPS capable of sourcing a minimum of
  • HP Scitex FB750 | Site Preparation Guide - Page 10
    blank media ● Handling printed output ● Loading and changing ink ● Servicing and cleaning the printer, and replacing components ● Operating the external RIP, local Excessive humidity may also cause corrosion problems and moisture contamination within the equipment. 4 Chapter 2 Site planning
  • HP Scitex FB750 | Site Preparation Guide - Page 11
    (elevation change) of 5.6 cm (2.2 in) over the printer width, and 5.1 cm (2.0 in) over the printer depth. Figure 2-1 Features and dimensions (FB550 shown, FB750 similar) Service-end User-end Power cord inlet Input side Table 2-2 Printer and table dimensions A Height B Width C Depth without tables
  • HP Scitex FB750 | Site Preparation Guide - Page 12
    Table 2-2 Printer and table dimensions (continued) FB550 L Recommended clear floor space with standard input , output, and accessory tables installed Length: 7.3 m (24 ft) Width: 4.5 m (15 ft) Figure 2-2 FB550 floor layout dimensions G E FB750 Length: 4 m (13 ft) Width: 5 m (18 ft) Length: 5
  • HP Scitex FB750 | Site Preparation Guide - Page 13
    service end or 3.7 m (12 ft) from the user end to ensure it is able to reach the power inlet. The main and auxiliary power cords connect to inlets on the electronics box at the user end of the printer the printer and be easily accessible. Ventilation and fume extraction The printer ink and printhead
  • HP Scitex FB750 | Site Preparation Guide - Page 14
    media feed problems. Due to be necessary. Inks and solvent printer. Consult your HP representative for a list of supported RIPs. Refer to the RIP documentation for the system requirements. The printer printer. RIP requirements The software and hardware requirements of the RIP is as follows. HP Scitex
  • HP Scitex FB750 | Site Preparation Guide - Page 15
    ethernet for TCP/IP printers NOTE: Firewall and antivirus must be disabled or configured to allow ONYX applications and printer ports (515, 1947, of Onyx configuration, see http://www.onyxgfx.com/system-specifications/. HP Scitex CALDERA GRAND RIP V10 (minimum configuration) ● Linux: ◦ Operating
  • HP Scitex FB750 | Site Preparation Guide - Page 16
    suite of remote support tools that enables communication between customers and HP. CallMe@hp client software must be installed on a networked computer running Windows XP or Windows Vista. This computer may be your Onyx RIP or another networked computer, but should be near the printer. One available
  • HP Scitex FB750 | Site Preparation Guide - Page 17
    dock Use the following dimensions and weights as you plan to receive and move the printer to its final location. Table 2-3 Dimensions and weight of printer as shipped with pallet, crate, and packaging FB550 FB750 Length 3.6 m (143 in) 4.4 m (171 in) Depth 1.7 m (67 in) 1.7 m (67 in) Height
  • HP Scitex FB750 | Site Preparation Guide - Page 18
    case of any question or problem, you should approach your local HP Authorized Representative for consultancy and support. However, if required, you can contact HP directly by using the following methods. NOTE: For up-to-date contact information, please visit http://www.hp.com/go/graphicarts. North
  • HP Scitex FB750 | Site Preparation Guide - Page 19
    6160 Venezuela: 58 212 278 8666 / 0 800 474 68368 CC LAR Nextel: (5255) 1088 0884; ID 52*20115*51 CC LAR e-Mail: [email protected] CC LAR Fax: +52 55 5258 6377 ENWW
  • HP Scitex FB750 | Site Preparation Guide - Page 20
    HP Scitex UV pigment ink supplies Printheads Ink Light Cyan (CH220A), Light Magenta (CH221A). Cartridges containing 2 liters of ink: White (CQ123A) Maximum (FB550) 64 mm (2.5 in) Length: 1.2 m (48 in) Width RIP supports print modes that include resolutions of 1200×600, 600×600 and 600×300 ENWW
  • HP Scitex FB750 | Site Preparation Guide - Page 21
    -fed media UV curable inkjet Dual shuttered UV lamps Variable size 12 HP UV Printhead Flush, 1-liter bottle Within California: Methyl Acetate (CAS# 79-20-9) Physical specifications Table 4-4 Dimensions and weights FB550 Printer dimensions (assembled) Height: 153 cm (60 in) Width: 325 cm (128 in
  • HP Scitex FB750 | Site Preparation Guide - Page 22
    Table 4-4 Dimensions and weights (continued) FB550 Extension tables dimensions (each table) Height: 102 cm (40 in) Width: 175 cm (69 in) Depth: 165 cm (65 in) Height (folded): 180 cm (71 in) Depth (folded): 57 cm (23 in) Weights (assembled) Printer: 720 kg (1586 lb) Input table: 32 kg (70
  • HP Scitex FB750 | Site Preparation Guide - Page 23
    CEE 7/4 or CEE 7/7 wall receptacle Required power cord Optional auxiliary power for ink system vacuum The printer can use any of the following 4.5 m (14.8 ft) power cords: ● USA: HP part number 8120-6903 ● Europe: HP part number 8120-6899 ● Cord without connector to electric outlet (for use with
  • HP Scitex FB750 | Site Preparation Guide - Page 24
    Environmental specifications Table 4-6 Printer environmental specifications Operating conditions Temperature: 20 to 30°C (68 to 85°F) Relative Humidity: 20-80%, non-condensing (40-60% recommended to avoid static electricity on
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
Scitex FB550 and FB750 Printers
Site Preparation Guide