HP Scitex FB950 HP Scitex FB950 - User Guide

HP Scitex FB950 Manual

Get HP Scitex FB950 PDF manuals and user guides View all HP Scitex FB950 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Scitex FB950 manual content summary:

  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 1
    HP Scitex FB950 Printer User Guide
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 2
    and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Printed in the US. Part number
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 3
    operating notes ...5 Safety warnings ...6 Workflow overview ...7 Quick Tour ...8 Special features ...10 Printheads ...10 Ink system ...10 Media handling ...10 Calibration ...10 Performance and ease-of-use 10 2 Printing Configure printing ...14 Equivalent print modes ...16 Configure media ...18
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 4
    jet-out lines ...29 Empty waste ink ...30 Clean the printhead carriage rail ...31 3 Control panel Overview ...34 Front Page ...35 Menu tree ...38 Menus ...41 Calibrate Printer ...41 Printer Settings ...42 Tools ...44 Warnings & Actions ...45 Service Printer ...45 Print Menus ...45 4 Calibration When
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 5
    6 Troubleshooting Troubleshooting checklist ...66 Warranty claims ...68 Diagnostics ...69 Hewlett-Packard technical services ...70 Help from your reseller ...70 Help from Hewlett-Packard 70 ...70 Index ...71 ENWW v
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 6
    vi ENWW
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 7
    1 Getting started This chapter shows you how to get started using your printer. It includes these topics: ● Operating requirements ● Connect the RIP ● Important operating notes ● Safety warnings ● Workflow overview ● Quick Tour ● Special features ENWW 1
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 8
    when it is necessary to power down the printer for service. See Appendix A, Technical Specifications, for details. ● Connect printer to its own electrical circuit. Do not connect the RIP, auxiliary power supply, or UPS into the same circuit as the printer. Environmental ● Make sure the room is well
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 9
    or a supported thirdparty manufacturer. ● To connect the printer to the HP RIP Software, refer to its User Guide for detailed instructions. ● To connect the printer to a third-party RIP, follow this procedure: Install the VideoNet card and cable 1. Power off the computer you will be using to run the
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 10
    RIP Software) or downloaded with the sendfile.bat batch file (also from the HP CD-ROM). 2. The file is copied to the printer. After the file has been received by the printer, a button will appear on the Front Page screen that enables you to switch between English and the second language. 4 Chapter
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 11
    in overheating and permanent damage. The lamps should be switched off only via the printer software. ● The maximum diameter allowed on the optional takeup spool is 178 mm (7.0 in) on a 76 mm (3 in) core. The supply-takeup system can support rolls of up to approximately 56.7 kg (125 lb). ● The media
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 12
    WITH THE POWER SWITCH IN THE OFF POSITION, POWER MAY STILL BE SUPPLIED TO THE PRINTER COMPONENTS. To completely cut power from the printer, you must unplug the power cord from the power outlet. ● Ozone - the high power UV light emitted by the curing lamps reacts with oxygen and produces ozone. This
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 13
    to the printer. If you are using a non-HP RIP, help or manual for instructions. 3. The manual purging may be necessary to restore the printheads to working condition. See Specifications on page 62 for information on using the included auxiliary power supply for the vacuum/pressure system. The printer
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 14
    control panel 2. UV-filtered observation windows 3. Emergency stop button (2 places) 4. Exhaust vents 5. Rigid media alignment pins 6. Electronics box (inside enclosure) 7. Data ports 8. VideoNet port 9. Port for optional foot switch 10. Main power switch 11. Main power, supply/takeup system power
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 15
    17. Ink supply rack 18. Ink connections 19. Profiler docking station 20. Vacuum/Pressure system auxiliary power inlet 21. Vacuum adjustment knob 22. Service station (inside enclosure) 23. Printhead maintenance vacuum (inside enclosure) 24. Waste ink spigot ENWW Quick Tour 9
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 16
    pressure, and air pressure to purge the printheads or ink tubes without removing them from the printer. ● Patent-pending automated printhead service station - fully maintains the health of the printheads while idle or in service, without operator intervention. Media handling ● Automatic head
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 17
    interface - touch-screen control panel with graphical Front Page interface presents frequently-used functions. A menu provides access to less-frequently used functions and troubleshooting help. ● User assistance - control panel features online help, interactive procedures, and diagnostics to assist
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 18
    12 Chapter 1 Getting started ENWW
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 19
    and media options, load media, and print: ● Configure printing ● Configure media ● Load and print on rigid media ● Load and print on roll-fed media ● Load ink ● Printing tips ● Check jet health ● Empty waste ink ● Clean the printhead carriage rail ENWW 13
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 20
    below). Jet replacement refers to the printer's ability to locate and replace inkjets panel. To change the print mode, follow these instructions. 1. On the control panel, press the Print : ● Bidirectional ● Unidirectional - Print From User (1) to Service (2) Side (prints only when the carriage
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 21
    heat from the UV lamps, which could result in bowing of the center of the media, and possible contact with the printheads. Thinner rigid media such as fluted polypropylene (Coroplast) are susceptible. To avoid warping, set a media delay in Printer Settings >
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 22
    modes require higher lamp settings to ensure sufficient curing. ● If the ink is not curing, increase the setting. The lamps will gradually lose the lamps. The aperture can also be set by touching the UV lamps info panel. The UV lamp shutters are vertical when completely opened, and rotate to change
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 23
    Table 2-2 Print modes by group (continued) Quality Direction Overspray High Quality BiDi Normal High Quality BiDi Sharp Edge High Quality Uni FineText High Quality Uni FineText High Quality Uni Normal High Quality Uni Normal Production BiDi FineText Production Uni FineText
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 24
    printer will accept a print job, it must be configured for a specific - for user-defined media, use the alphabetic used (with clear films, for example). ● Print Mode - quality and direction settings (see Configure printing on page 14). ● UV Lamps - see Configure printing on page 14 for the possible UV
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 25
    changes. If the media is lifting off the belt, increase the fan speed. If the media advance seems impeded by the vacuum, decrease the fan speed. ● Printing Delay - press the ▲ and ▼ arrow keys on the control panel to increase or decrease the delay (seconds per print swath). To increase throughput,
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 26
    heavier, badly warped media. For best results, use the flattest available media. 3. On the control but increases the chance of the carriage or printheads striking the media. 6. Select the media length sheets loaded at once across the width of the printer The control panel displays a summary screen of
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 27
    . Load the subsequent sheet against the media alignment bar, and press the Sheet Ready foot pedal or control panel button. The printer prints on the next sheet and will use the same option settings on all of the copies in the print job. Reload media There are two ways to reload the
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 28
    imaging sensor) is used to locate the position of each sheet as part of the load process. You can set the printer camera to either " the user end toward the service end. Stored jobs Whenever the printer receives a sheet-fed print job from the RIP, the job is automatically stored in the printer's
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 29
    . ● To set up a two-sided print job using Stored Jobs, press the Print Two Sides key. The printer will prompt you to select a Stored Job for the sheets loaded, each copy will print on a separate sheet, and the printer will prompt for additional sheets until the number of copies requested have been
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 30
    media path If the optional roll-fed media supply and takeup system is installed on the printer, you can print on rollfed media. NOTE: The first time that the roll-fed system is used, it must be enabled on the control panel menu. Select Settings > Support Rollfed to enable the roll-fed system. 1. If
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 31
    the foam press roller (3) into operating position. 12. If you are not using the takeup system, go to step 19. 13. Align the cardboard takeup core (7), and down to the printer side of takeup roller (8). 16. Looking down the length of the takeup roller from the user end, the roller rotates clockwise
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 32
    Place the foam press roller (3) into operating position. 9. If you are not using the takeup system, or if the media is already loaded in the takeup, go (7), and down to the printer side of takeup roller (8). Looking down the length of the takeup roller from the user end, the roller rotates clockwise
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 33
    box out of its holder and turn the box upside down so the ink tube is pointing up. 3. Grasp the metal connector where the ink tube enters the printer, and push it up to release the ink supply tube. 4. Remove and dispose of the ink box (refer to the MSDS for proper disposal procedures). Load a full
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 34
    rolls - for lighter, smaller rolls of media, you can use the rigid media tables and media rollers to feed the media like rigid media. Pause-swapping ink You can replace one or more ink boxes during a print by pausing the printer: 1. On the printer control panel, press the Pause key. 2. Remove the
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 35
    working jet on the same or another printhead (in Production and High Quality modes). . 3. Press the Proceed (►) key to continue. The printer prints the prime bar pattern. The prime bars will show permanently ("hard bad jets"). For instructions, see AutoJet on page 49 or Manual Jet Mapping on page 55.
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 36
    , you can tell the printer to track the amount of ink expelled from the printheads rather than use the float switch (see menu: Printer Settings > Use Service Station Float). The reservoir drain spigot is located under the media drive belt on the user end of the printer. To empty the reservoir
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 37
    carriage rail For best print quality, clean the printhead carriage rail monthly or more frequently in dusty or dirty environments. ● Clean the carriage wheels with a dry cotton swab. Do not use solvents, isopropyl alcohol, or any other cleaning fluid. ● Wipe the rail along its entire length
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 38
    32 Chapter 2 Printing ENWW
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 39
    3 Control panel This chapter describes the functions of the control panel. ● Overview ● Front Page ● Menu tree ● Menus ENWW 33
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 40
    printer when changing media and ink, respond to an error condition, or configure options. The control panel provides various forms of online user can continue. Any action on your part is optional. Printing is not interrupted for a Warning message. When the printer issues one of these messages, the
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 41
    marks "low ink" level (press here for a detailed status screen) 4. Media detector (red=media out, green=media detected) - the detector can only detect the presence of white or light-colored media. Clear or reflective media cannot be detected. 5. UV lamps status (◄=user side, ►=service side) - black
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 42
    is ever lost, the ink in the printheads will seep onto the service station. To prevent ink leakage during an unexpected power outage, use the vacuum/pressure system's 24 volt auxiliary power supply and connect it to an uninterruptable power supply (UPS). See Appendix A for specifications. It is not
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 43
    26. Context specific buttons - the control panel buttons displayed change as required by the current state of the printer or process. 27. Attention messages - blinks on the control panel when the printer detects an error condition, potential error condition, or when you make a change that requires
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 44
    are dynamically hidden depending on the printer mode. Calibrate Printer ● Auto Calibrations ◦ AutoBidi Calibration ◦ AutoH2H Calibration ◦ AutoJet Calibration ◦ Full AutoSet ◦ AutoSet Summary ● Manual Calibrations ◦ Manual Bidi Registration ◦ Printhead X Calibration ◦ Manual Jet Mapping ◦ Jet Status
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 45
    Delete Language (if second language present) ● Use Thickness Sensor ● Use Ionizer Bar ● Low Ink Warning ● UV Lamps Idle Time ● Support Rollfed ● Use Service Station Float ● Printer Name ● Restore All Defaults Tools ● System Information ● Maintenance ◦ Access Printheads ◦ Perform An Air Purge ◦ Print
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 46
    ◦ Vacuum Pressure ◦ Open Loop Actuator Test ◦ Open Loop Service Station Test ◦ Warnings and Actions List ◦ Error History ◦ Log Error History ◦ Log System Info *Warnings & Actions (In Expert Mode only) Service Printer (for service provider use only) Print Menus 40 Chapter 3 Control panel ENWW
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 47
    to calibrate the printer visually, without the printer's digital imaging sensor. Inaccurate judgments by the operator during these tests could result in substandard output. See Manual calibrations on page 52 for instructions. ◦ Manual Bidi Registration ◦ Printhead X Calibration ◦ Manual Jet Mapping
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 48
    strip if the sheet is slightly skewed, not perfectly rectangular, or other error is present. You can specify a separate value for the left and right precision for finding the left (user end), right (service end), and front edges of the media. First, the printer prompts you to select a measurement
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 49
    on only during media load, printing, and when the lamps are on. ● Low Ink Warning - defines the amount of ink remaining in the ink box supply at which the printer will display a "low ink" message on the control panel. ● UV Lamps Idle Time - sets the amount of time the lamps will stay on after
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 50
    the printheads with ink. ◦ Empty Heads (Fill With Air) - fills the printheads with air. User Diagnostics menu: User Diagnostics presents an interactive troubleshooting program to diagnose problems before calling technical support. It walks you through a series of tests and checks for certain printer
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 51
    History - writes a file containing all of the errors that have occurred on the printer since the printer was put into service, for troubleshooting by technical support personnel. The file is saved on the computer running the HP RIP Software at: C:\PROGRAM FILES\HP-RIPSW\LOGS\C3.TXT ● Log System Info
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 52
    46 Chapter 3 Control panel ENWW
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 53
    4 Calibration This chapter explains how to calibrate the printer for the best possible output: ● When to calibrate ● AutoJet ● AutoTune ● Auto calibrations ● Manual calibrations ● Linearization ENWW 47
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 54
    When printheads have been moved or replaced (by an authorized service provider) Auto Bidirectional or Manual Bidirectional, and Head-to-Head If Auto Calibrations do not improve print quality, or if printing on transparent or other media that cannot be detected by the printer Manual Calibrations
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 55
    at all. During subsequent printing, the printer compensates for these jets by using other jets in their place, ensuring maximum print quality without reducing print speed. You can also identify and map missing jets manually from the Manual Calibrations menu (see Manual Jet Mapping on page 55). You
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 56
    panel. Quality Check When you run AutoJet manually, the software notifies you if there are any jet or alignment problems so that they can be addressed. When AutoTune runs AutoJet at scheduled intervals, you can use the Quality Check feature to handle AutoJet errors. When Quality Check is enabled, if
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 57
    -to-head) Calibration - ensures that the printheads are in alignment relative to each other. or an error message ◦ Header showing the date and time, software version, and printer type ◦ The higher quality modes (Production and High Quality) use jet replacement, so they can print successfully with a
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 58
    manual BiDi and X head calibrations are time-consuming and can be error-prone, but is necessary when calibrating transparent media or other media that the printer supported , and nearly empty supply rolls. 1. On the Manual Calibrations menu, highlight calibration, but it uses less media. Measure
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 59
    250 mm (10 in) apart. Manual BiDi Registration Bidirectional registration is a method to align each of the printheads so that dot placement is accurate the X axis (along the direction of printhead travel). The bidirectional registration pattern consists of a series of vertical lines. Half the pixels
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 60
    Calibrations in the menu. 2. Press Printhead X Calibration in the menu. The control panel asks whether you want to print a manual head-to-head calibration page. ● If you need to print a new calibration pattern, press the Proceed (►) key. The printer prints a calibration page. When the calibration
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 61
    , press the Proceed (►) key. The printer prints a jet map test pattern. If a line segment is missing or broken, the jet number shown next to it is out. A code letter if present provides further information: ● R - no replacement ● S - user disqualified "soft" jetout ENWW Manual calibrations 55
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 62
    H - user disqualified a jet. ● View current bad jets - lists the bad jets on a given printhead. ● Clear all bad jets for a head - clears (marks as good) all press Proceed (►). The control panel displays a numeric keyboard that you can use to enter the number of the bad jet. 2. Enter the jet number
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 63
    the soft jets only. The control panel reports the number of jets that were cleared on the selected printhead. 4. Press ►. The head selection screen appears. 5. Repeat steps 1 through 4 for any other printhead, or press n to return to the menu. Clear All Bad Jets When you select Clear All Bad Jets
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 64
    Lines This option prints a version of the Prime Bars in which missing jets that are replaced are marked with a black square. This pattern is useful after performing Manual Jet Mapping, as it confirms both that all missing jets have been mapped out and that all mapped-out jets have been successfully
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 65
    have to print again at some point in the future and match the original color Color calibration is a feature of the RIP connected to the printer. Refer to the documentation that accompanies the RIP for further information. For maximum accuracy, the photodiode must be cooled by its fan before reading
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 66
    60 Chapter 4 Calibration ENWW
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 67
    5 Specifications ENWW 61
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 68
    feet (6 m), requires FRM part number 0901565 if using phase converter (see Site Preparation Guide, part number 0706456); OR ● Part No. 0602650 Europe (Harmonized), length 19.7 feet (6 m) Optional auxiliary power for vacuum system Supplied 24 volt DC power supply with universal adapters, connected
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 69
    5-1 Specifications (continued) Printing technology 12 piezo-electric inkjet printheads, variable drop size, 192 nozzles per printhead Resolutions 1200 x 600 dpi, 600 x 600 dpi, 600x300 dpi (as supported by the RIP) Ink HP Scitex FB250 Ink, 6-color (CMYKlclm) flexible UV cure inks, off-head ink
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 70
    64 Chapter 5 Specifications ENWW
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 71
    help from Hewlett-Packard. For other software-specific troubleshooting procedures, refer to your application software documentation or the other documentation listed on page iv of this manual. ● Troubleshooting checklist ● Warranty claims ● Diagnostics ● Hewlett-Packard technical services ENWW 65
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 72
    question 3.NO: Check the following: ● There may be a hardware problem with the printer's internal components. Follow the diagnostic routine on the control panel to determine the problem. Write down any error codes and call technical services as directed by the control panel. 3. Can you send a file
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 73
    the printheads to working condition. ● Noisy carriage motion or repeating print artifacts - if the carriage develop flat spots due to non-use, use the Carriage Motion Troubleshooter to restore their shape (see Tools > User Diagnostics > Carriage Motion). ● Media buckling or media feed problems - the
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 74
    or contamination of the ink supply due to improper handling of the ink or ink system ● Printheads which have not been properly maintained as defined in the user documentation, and printheads with jet-outs that AutoJet is able to substitute in Production print mode ● Service (including upgrades and
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 75
    diagnostic tests designed to help solve printer hardware problems. If one of the tests encounters an error, and error message appears, which includes: ● Error code - always write down this code for reference by Technical Services. ● Brief description of the error ● A series of buttons that allow you
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 76
    troubleshooting information. As requested by Technical Services, from the menu (Service Printer > Print Info Pages), print, photocopy the pages onto plain paper, and fax them to the number provided. Be ready to supply HP with details about your system's configuration and details about the problem
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 77
    21 Loading ink 27 M Manual BiDi Registration 53 Manual calibrations 52 Manual Jet Mapping 55 Mapping out jets 29 Margins 22 Media configuration 18 reloading rigid 21 Media Feed Calibration 52 Media Wizard defined 10 Menu Calibrate Printer 41 Print Menus 45 Printer Settings 42 Service Printer 45
  • HP Scitex FB950 | HP Scitex FB950 - User Guide - Page 78
    3 Roll-fed media printing 24 S Safety warnings 6 Service Printer 45 Sharp Edge defined 15 Special features 10 Specifications 61 Stored jobs 22 Support (technical) 70 T Technical services 70 Tips 28 Tools 44 Troubleshooting 65 U Unidirectional printing 14 V VideoNet interface card 3 protocol
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
HP Scitex FB950 Printer
User Guide