HP Server Console 0x2x8 HP KVM Server Console Switch Installation Instructions
HP Server Console 0x2x8 Manual
View all HP Server Console 0x2x8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Server Console 0x2x8 manual content summary:
- HP Server Console 0x2x8 | HP KVM Server Console Switch Installation Instructions - Page 1
Instructions Read Instructions Completely Before Beginning Installation Procedures © 2003 Hewlett-Packard Development Company, L.P. Overview The HP KVM Server Console Switch ships with rack mounting brackets for easy integration into your rack. Before installing the HP KVM Server Console Switch - HP Server Console 0x2x8 | HP KVM Server Console Switch Installation Instructions - Page 2
Rack Mounting the HP KVM Server Console Switch NOTE: Before installing the HP KVM Server Console Switch into the rack, connect the HP KVM Server Console Switch to a power source, using the power cords provided, and power on the unit. An activity indicator light is displayed after a few seconds. If - HP Server Console 0x2x8 | HP KVM Server Console Switch Installation Instructions - Page 3
, two on each side. Performing a Standard-Mount Installation 1. Remove the four screws, two on each side, from the console switch. 2. Attach the 1U brackets to the console switch using the four screws you removed. Performing a Cantilever-Mount Type A Installation 1. Remove the four screws, two on - HP Server Console 0x2x8 | HP KVM Server Console Switch Installation Instructions - Page 4
1. Remove the four screws, two on each side, from the console switch. 2. Attach the 1U brackets to the console switch using the four screws you removed. Regulatory Notice Rating Label The rating is determined, refer to the corresponding statement in the user guide on the Documentation CD.
HP KVM Server
Console Switch
Installation Instructions
Read Instructions Completely Before Beginning
Installation Procedures
© 2003 Hewlett-Packard Development Company, L.P.
(c) 2003 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or editorial errors
or omissions contained herein. The information in this document is provided
“as is” without warranty of any kind and is subject to change without notice.
The warranties for HP products are set forth in the express limited warranty
statements accompanying such products. Nothing herein should be
construed as constituting an additional warranty.
HP KVM Server Console Switch
Installation Instructions
October 2003
Part Number 344198-021
344198- 021
Overview
The HP KVM Server Console Switch ships with rack mounting
brackets for easy integration into your rack. Before installing
the HP KVM Server Console Switch and other components in
the rack cabinet (if not already installed), stabilize the rack in a
permanent location. Begin installing your equipment at the
bottom of the rack cabinet, then work to the top. Avoid uneven
loading or overloading of the rack cabinets.
Installation Checklist
Before installation, refer to the following lists to be sure that all
of the listed components were received.
Kit Contents
•
KVM Server Console Switch
•
Power cords
•
Rack mounting kit
•
Serial download cable
•
Documentation kit
•
Firmware CD kit
This kit might contain extra hardware for your convenience.
Required Items Not Included
•
PS/2 Interface Adapter or USB Interface Adapter
•
UTP CAT5 cable (CAT6 and CAT7 may be also used)
Optional Items
Expansion Module
Required Tools
•
Phillips screwdriver
•
T-25 Torx driver