HP Server Console 0x2x8 HP IP Console Switchwith Virtual Media Installation In
HP Server Console 0x2x8 Manual
 |
View all HP Server Console 0x2x8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Server Console 0x2x8 manual content summary:
- HP Server Console 0x2x8 | HP IP Console Switchwith Virtual Media Installation In - Page 1
HP IP Console Switch with Virtual Media Installation Instructions Installation overview The console switch ships with rack-mounting brackets for easy integration into the rack. Before installing the console switch and other components in the rack cabinet (if they are not already installed), - HP Server Console 0x2x8 | HP IP Console Switchwith Virtual Media Installation In - Page 2
• Phillips screwdriver • Cage nut insertion tool (included with your original rack hardware kit) Rack-mounting the console switch NOTE: Before installing the HP IP Console Viewer with Virtual Media into the rack, connect the HP IP Console Viewer with Virtual Media to a power source, using the power - HP Server Console 0x2x8 | HP IP Console Switchwith Virtual Media Installation In - Page 3
. 3. Slide the side-mounting bracket tabs into the U locations on each side of the rack. 3. Slide the side-mounting bracket tabs into the U locations on each side of the rack. 4. Secure the console switch to the rails using four selftapping screws, two on each side. 4. Install four cage nuts - HP Server Console 0x2x8 | HP IP Console Switchwith Virtual Media Installation In - Page 4
a standard-mount installation 1. Remove the four screws, two on each side, from the console switch. 2. Attach the 1U brackets to the console switch using the four screws that you removed. 5. Secure the console switch to the rails using two M-6 screws, one on each side. 3. Install a cage nut - HP Server Console 0x2x8 | HP IP Console Switchwith Virtual Media Installation In - Page 5
screws that you removed. Performing a cantilever-mount type B installation 1. Remove the four screws, two on each side, from the console switch. 2. Attach the 1U brackets to the console switch using the four screws that you removed. 3. Install up to six clip nuts. 3. Install up to six cage nuts
-
1 -
2 -
3 -
4 -
5
 |
 |
HP IP Console Switch
with Virtual Media
Installation Instructions
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
March 2006 (First Edition)
Part Number 409056-001
Installation overview
The console switch ships with rack-mounting brackets for
easy integration into the rack. Before installing the console
switch and other components in the rack cabinet (if they are
not already installed), stabilize the rack in a permanent
location. Begin installing the equipment at the bottom of the
rack cabinet, and then work to the top. Avoid uneven
loading or overloading of the rack cabinets.
Rack-mount safety instructions
When rack-mounting a console switch, consider the
following factors:
•
Elevated operating ambient temperature—If the
equipment is installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the
rack environment might be greater than room ambient
temperature. Install the equipment in an environment
compatible with the operating temperature.
•
Reduced air flow—In the rack, the rate of air flow
required for safe operation of the equipment must not
be compromised.
•
Mechanical loading—Avoid a potentially hazardous
condition caused by uneven mechanical loading by
carefully mounting the equipment in the rack.
•
Circuit overloading—When connecting the equipment
to the supply circuit, consider the effect that
overloading of the circuits might have on overcurrent
protection and supply wiring. Consider the equipment
nameplate ratings when addressing this concern.
•
Reliable earthing—Maintain reliable earthing of rack-
mounted equipment. Pay particular attention to supply
connections other than direct connections to the branch
circuit, such as the use of power strips.