HP Slate 7 2800 HP Tablet 7 Maintenance and Service Guide
HP Slate 7 2800 Manual
View all HP Slate 7 2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Slate 7 2800 manual content summary:
- HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 1
HP Tablet 7 Maintenance and Service Guide - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 3
the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 4
iv Safety warning notice - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 5
Tablet major components ...5 Trim Kit contents ...7 Miscellaneous parts ...7 Sequential part number listing ...8 4 Removal and replacement procedures preliminary requirements 9 Tools required ...9 Service and replacement procedures 14 Component replacement procedures 14 Rear cover 14 Battery ... - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 6
5 Backing up and recovering your data 27 Updating apps, widgets, and the operating system 27 Back up and reset ...27 Factory data reset ...28 Android system recovery mode 28 6 Tablet specifications ...29 7 Power cord set requirements 30 Requirements for all countries 30 Requirements for - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 7
Audio and video Ports Keys Power requirements Operating system Serviceability Description HP Tablet 7 RK3066A dual core A9 1.60-GHz processor 7.0-in (1024×600), liquid crystal display (LCD) + 5-point multiTouchScreen + cover lens module, 16:9 aspect ratio, typical brightness: 400 nits Support - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 8
jack Internal microphone Micro SD Card reader Power button WLAN antenna Item (6) (7) (8) (9) (10) Component Front camera Rear camera Speaker and headphone volume Speakers (2) Micro USB port (for charging or connecting to tablet) 2 Chapter 2 External component identification - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 9
3 Illustrated parts catalog 3 - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 10
The serial number and product number of your tablet are located on the left edge of the tablet. The model number of your tablet is located on the back of your tablet. You may need the information when you travel internationally or when you contact support. 4 Chapter 3 Illustrated parts catalog - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 11
-GB of system memory In silver finish for use only on tablet models equipped with 16-GB of system memory In red finish for use only on tablet models equipped with 8-GB of system memory In silver finish for use only on tablet models equipped with 8-GB of system memory Spare part number 731532 - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 12
(include left and right speakers and cables) 727665-001 System board (includes battery shielding tape): Equipped with an RK3066A dual core A9 1.60-GHz processor and actuator Antenna board 727662-001 7.0-in, LCD, TFT, TouchScreen display assembly 727663-001 6 Chapter 3 Illustrated parts - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 13
For use in Europe, the Middle East, and Africa For use in Latin America For use in North America HP Tablet 7 tablet with TFT, LCD TouchScreen: Equipped with 16-GB of system memory in red finish for use in all countries and regions Equipped with 16-GB of system memory in silver finish for use - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 14
system memory (includes battery shielding tape) 727667-001 Front-facing webcam 727909-001 Rear cover in red finish for use only on tablet models equipped with countries and regions 732048-001 HP Tablet 7 tablet with TFT, LCD TouchScreen and 16-GB of system memory in red finish for use in all - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 15
required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screw driver ● Magnetic screw driver ● Phillips P00 screw driver ● Torx T-4 screw driver Service considerations The following sections include some of the considerations that you must keep - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 16
or snagged by parts being removed or replaced. Handle flex cables with extreme care; hard drive, shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet inch of shock-proof foam. Avoid dropping drives from any height onto any surface. After removing a hard - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 17
may function normally for a while, then degrade in the internal layers, reducing its life expectancy. CAUTION: To prevent damage to the tablet when you are removing or installing internal components, observe these precautions: Keep components in their electrostatic-safe containers until you are - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 18
avoid static charging. When grounding is not possible, use an ionizer to dissipate electric charges. Workstation tools and equipment. ● Use conductive field service tools, such as cutters, screw drivers, and vacuums. ● When fixtures must 4 Removal and replacement procedures preliminary requirements - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 19
foam ● Conductive tabletop workstations with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive plastic bags, tubes, or boxes ● Metal tote boxes - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 20
are as many as 16 screws that must be removed, replaced, and/or loosened when servicing the tablet. Make special note of each screw size and location during removal and replacement. Rear cover Description In red finish for use only on tablet models equipped with 16-GB of system memory In silver - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 21
3. Remove the I/O bezel (2). The I/O bezel is available using spare part number 731532-001. 4. Separate the top edge (1) of the rear cover from the display assembly. 5. Remove the rear cover (2). Reverse this procedure to install the keyboard. Removal and replacement procedures 15 - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 22
14). WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To prevent loss of - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 23
4. Remove the battery (5). Reverse this procedure to install the battery. Removal and replacement procedures 17 - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 24
16). WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To prevent loss of - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 25
that secure the system board to the display assembly. 3. Lift the right side (1) of the system board until it rests at an angle. Removal and replacement procedures 19 - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 26
4. Remove the system board (2) by sliding it up and to the right at an angle. Reverse this procedure to install the system board. 20 Chapter 4 Removal and replacement procedures preliminary requirements - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 27
the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the rear cover (see Rear cover on page 14). 5. Remove the battery (see Battery on page the system board upside down with the front toward you. Removal and replacement procedures 21 - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 28
: When installing the front-facing webcam, note that the connector is keyed and connects to the system board only one way. 22 Chapter 4 Removal and replacement procedures preliminary requirements - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 29
the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the rear cover (see Rear cover on page 14). 5. Remove the battery (see Battery on (3). Reverse this procedure to install the USB connector. Removal and replacement procedures 23 - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 30
the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the rear cover (see Rear cover on page 14). 5. Remove the battery (see Battery on page 16). Remove the USB connector: ▲ Detach - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 31
the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the rear cover (see Rear cover on page 14). 5. Remove the battery (see Battery on page 16). Remove the speakers: 1. Disconnect the - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 32
the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the rear cover (see Rear cover on page 14). 5. Remove the battery (see Battery on install the side trim. 26 Chapter 4 Removal and replacement procedures preliminary requirements - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 33
and notify you when it is ready to install these updates. If you want to update the operating system manually, go to http://www.hp.com/ support. You can also set preferences for backing up and restoring your data in case of loss. Back up and reset 1. To access Settings, touch the All apps icon, and - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 34
Under PERSONAL, touch Back up & reset. 3. Under PERSONAL DATA, select Factory data reset, and then follow the on-screen instructions. Android system recovery mode 1. Press the power system now. ● Apply update from ADB. ● Update/recover from SD card. 28 Chapter 5 Backing up and recovering your data - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 35
6 Tablet specifications Metric U.S. Dimensions Width 19.7 cm 7.8 in Depth 1.1 cm 0.4 in Height 12.0 cm 4.7 in Weight 0.4 kg 0.9 lbs Temperature Operating 5°C to 35°C 41°F to 95°F Nonoperating - - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 36
to 240 volts AC. The 3-conductor power cord set included with the tablet meets the requirements for use in the country or region where the regions must meet the requirements of the country or region where the tablet is used. Requirements for all countries The following requirements are applicable - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 37
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 38
local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle. 32 Chapter 8 Recycling - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 39
24 audio, product description 1 B battery removal 16 spare part number 6, 8, 16 C cables, service considerations 10 connectors, service guidelines equipment 13 grounding 11 packaging 12 transporting 12 workstation 12 H HP Tablet 7, spare part numbers 7, 8 I I/O bezel removal 14 spare - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 40
removal 25 spare part number 6, 8, 25 system board removal 18 spare part numbers 6, 8, 18 system board bracket, illustrated 7 T tablet, major components 5 tablet, spare part numbers 7, 8 tools required 9 transporting guidelines 12 Trim Kit contents 7 spare part number 6, 7, 8 U USB cable extension - HP Slate 7 2800 | HP Tablet 7 Maintenance and Service Guide - Page 41
HP Tablet 7
Maintenance and Service Guide