HP Spectre 13t-3000 HP Spectre 13 Ultrabook - Maintenance and Service Guide
HP Spectre 13t-3000 Manual
View all HP Spectre 13t-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Spectre 13t-3000 manual content summary:
- HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 1
HP Spectre 13 Ultrabook Maintenance and Service Guide IMPORTANT! This document is intended for HP authorized service providers only. - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 3
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 4
iv Safety warning notice - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 5
Buttons ...8 Keys ...9 Left side ...10 Right side ...12 Bottom ...13 Labels ...14 3 Illustrated parts catalog 16 Computer major components 16 Rubber procedures 22 Preliminary replacement requirements 22 Tools required ...22 Service considerations 22 Plastic parts 22 Cables and connectors 22 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 6
assembly ...33 Speaker assembly 36 Touchpad ...38 Fan ...40 Heat sink ...42 Battery ...45 System board ...47 Power connector cable 50 Power button board 51 Keyboard and top cover 53 5 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI 56 Starting Setup Utility (BIOS) ...56 Updating - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 7
8 Power cord set requirements 67 Requirements for all countries 67 Requirements for specific countries and regions 68 9 Recycling ...69 Index ...70 vii - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 8
viii - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 9
Name Processors Chipset Graphics Panel Memory Solid-state drive Description HP Spectre 13 Ultrabook Intel Quad Core i7-4500U 1.80-GHz processor (turbo up to 3.00-GHz; 1600-MHz FSB, 4.0-MB cache, dual core, 15 W; configured with 8-GB RAM only) Intel® Quad Core® i5-4200U 1.60-GHz processor (turbo - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 10
Russia, and Ukraine) ● Intel Wireless 7260BN 802.11 bgn 2x2 WiFi + BT 4.0 Combo Adapter (default for Indonesia, Russia, and Ukraine) HP Multi-Format Digital Media Card Reader Supports SD/SDHC/SDXC Push-push insertion/removal One NGFF slot (2230) for WLAN One NGFF slot (2280) for SSD Headphone output - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 11
Power requirements Security Operating system Serviceability Description Supports 45W Smart Adapter (4.5mm barrel connector) 1.8 M length AC and DC power cords 4 cell battery, 51 WHr Intel AT-p Ready support Kensington Security Lock Trust Platfom Module (TPM) support Windows 8.1 End user replaceable - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 12
2 External component identification Display Component (1) Internal display switch (2) WLAN antennas (2)* (3) Internal microphones (2) (4) Ambient light sensor Description Turns off the display and initiates Sleep if the display is closed while the power is on. NOTE: The internal display - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 13
and chat online using streaming video. To use the webcam, from the Start screen, type cyberlink, and then select CyberLink YouCam from the list of applications. (6) region. To access this guide, from the Start screen, type support, and then select the HP Support Assistant app. Display 5 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 14
Right control zone Description Textured area that allows you to perform additional gestures. Moves the on-screen pointer and selects or activates items on the screen. NOTE: The TouchPad also supports edge-swipe gestures. Functions like the left button on an external mouse. Functions like the right - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 15
Lights Component (1) Power light (2) Caps lock light (3) Mute light (4) Wireless light Description ● On: The computer is on. ● Blinking: The computer is in the Sleep state, a powersaving state. The computer shuts off power to the display and other unneeded components. ● Off: The computer is - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 16
, press and hold the power button down for at least 5 seconds to turn off the computer. NOTE: For select models, the Intel® Rapid Start Technology inactivity. To learn more about your power settings, from the Start screen, type power options, select Settings, and then select Power Options from - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 17
pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with the esc key. Returns you to the Start screen from any app or window. NOTE: Pressing the Windows key again will return you to the most recent app that you had open. Execute frequently - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 18
or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this guide, from the Start screen, type support, and then select the HP Support Assistant app. NOTE: When a device is connected to the jack, the computer speakers are disabled. NOTE - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 19
card reader (5) Hard drive light Description Connects optional memory cards that store, manage, share, or access information. To insert, hold the card label side up with connectors facing the slot, and press in on - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 20
audio device, such as a highdefinition television, any compatible digital or audio component, or a high-speed HDMI device. ● On: The AC adapter is connected and the battery is charged. ● Off: The computer is using battery power. Connects an AC adapter. 12 Chapter 2 External component identification - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 21
to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Produce sound. Bottom 13 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 22
you troubleshoot system problems or travel internationally with the computer. IMPORTANT: All labels described in this section will be located in one of 3 places, depending on your computer model: Affixed to the bottom of the computer, located in the battery bay, or under the service door. ● Service - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 23
Component (4) Model number (select models only) (5) Revision number ● Regulatory label(s)-Provide(s) regulatory information about the computer. ● Wireless certification label(s)-Provide(s) information about optional wireless devices and the approval markings for the countries or regions in - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 24
3 Illustrated parts catalog Computer major components 16 Chapter 3 Illustrated parts catalog - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 25
: The display assembly is spared as a whole unit only. QHD FHD Top cover (includes TouchPad): For use in the United States For use in the United Kingdom i5-4200U processor and 4-GB system memory for use in models with nonWindows 8 operating systems Intel Core i5-4200U processor and 4-GB system memory - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 26
8 Standard operating systems Intel Core i5-4200U processor and 8-GB system memory for use in models with Windows 8 Professional operating systems Power button board Power connector cable Speaker assembly (includes cable) Battery (4-cell, 51-Wh, 3.42-Ah) Bottom cover Rubber Kit Spare part number - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 27
Miscellaneous parts Component HP Smart AC adapter (45-W) Adapters HDMI to VGA RJ-45 to USB Power cord (3-pin, black, 1.83-m): For use in Australia For adapter Intel Dual Band Wireless-AC 7260 802.11 AC 2x2 WiFi + BT 4.0 Combo Adapter 4-cell, 51-Wh, 3.42-Ah, Li-ion battery Miscellaneous parts 19 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 28
operating systems System board with Intel Core i7-4500U processor and 8-GB system memory for use in models with Windows 8 Professional operating systems System board with Intel Core i5-4200U processor and 4-GB system memory for use in models with non-Windows 8 operating systems System board with - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 29
cable and screws) Bottom cover Touchpad board Power connector cable Fan (includes cable) Heat sink (includes replacement thermal grease) Keyboard backplate Display assembly, 33.8-cm (13.3-in), QHD, touchscreen Display assembly, 33.8-cm (13.3-in), FHD, touchscreen Power button board Rubber Kit - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 30
plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 31
are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the that the optical drive tray is closed. Handle drives on surfaces covered with at least one inch of shock-proof foam. Avoid dropping life expectancy. Preliminary replacement requirements 23 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 32
CAUTION: To prevent damage to the computer when you are removing or installing internal components, observe these precautions: Keep components in their electrostatic-safe containers until you are ready to install them. Before touching an electronic component, discharge static electricity by using - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 33
Follow these grounding workstation guidelines: ● Cover the workstation with approved static-shielding tools and equipment. ● Use conductive field service tools, such as cutters, screwdrivers, and vacuums contact with pins, leads, or circuitry. ● Turn off power and input signals before inserting or - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 34
with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive plastic bags, tubes, or boxes ● Metal tote boxes ● Electrostatic voltage levels and - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 35
be removed, replaced, and/or loosened when servicing the computer. Make special note of each screw steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on the bottom cover. Reverse the removal procedures to install the feet. - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 36
part number 744360-001 Before removing the bottom cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 37
. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery. Remove the solid-state drive: 1. Remove the - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 38
2. Pull the drive out of the socket (2). Reverse this procedure to install the solid-state drive. 30 Chapter 4 Removal and replacement procedures - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 39
to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Turn off the computer. If you are unsure computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery. Component replacement procedures 31 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 40
Remove the WLAN module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled "1". The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2". If the - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 41
Description 33.8-cm (13.3-in), QHD, touchscreen 33.8-cm (13.3-in), FHD, touchscreen Spare part number 744368-001 744369-001 Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 42
to open the display hinges, and then separate the display from the computer (2). 5. If it is necessary to remove the clutch cover or the display hinges: a. Remove the clutch cover (the plastic piece on the bottom of the display) by pulling it straight up to disengage it (1). b. Remove the 4 Phillips - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 43
d. Remove the display cable from the right hinge (3) and the control cable from the left hinge (4). e. Lift the hinges from the display (5). Reverse this procedure to reassemble and install the display assembly. Component replacement procedures 35 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 44
, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery. Remove the speaker assembly: 1. Disconnect the - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 45
4. Lift the speakers (4) from the computer. Reverse this procedure to install the speaker assembly. Component replacement procedures 37 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 46
, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery. Remove the touchpad: 1. Disconnect the touchpad - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 47
3. Lift the touchpad straight up and off the top cover (3). Reverse this procedure to install the touchpad. Component replacement procedures 39 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 48
, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery. Remove the fan: 1. Disconnect the fan cable - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 49
3. Remove the fan (3) from the computer. Reverse this procedure to install the fan. Component replacement procedures 41 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 50
sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery. 42 Chapter 4 Removal and replacement procedures - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 51
replacement thermal material locations on a computer model equipped with a graphics subsystem with discrete memory. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat the processor (1) and the heat sink section (2) that services it Component replacement procedures 43 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 52
Reverse this procedure to install the heat sink. 44 Chapter 4 Removal and replacement procedures - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 53
, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). Remove the battery - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 54
6. Remove the battery from the computer (6). Remove the removal procedure to install the battery. 46 Chapter 4 Removal and replacement procedures - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 55
i5-4200U processor and 8-GB system memory for use in models with 743851-61 Windows 8 Professional operating systems Before removing the system board, follow these steps: 1. Turn the following components: a. Bottom cover (see Bottom cover on page 28) b. Battery (see Battery on page 45) c. WLAN - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 56
Remove the system board: 1. Disconnect the following cables from the system board. ● (1): Display cable ● (2): Power connector cable ● (3): Large keyboard cable ● (4): Small keyboard cable ● (5): Power button board cable ● (6): Speaker cable ● (7): Control cable 2. Lift the Mylar tape (1) to gain - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 57
6. Pull the board up and away toward the left (5). Reverse this procedure to install the system board. Component replacement procedures 49 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 58
follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, the computer. 4. Remove the following components: a. Bottom cover (see Bottom cover on page 28) b. Battery (see Battery on page 45) c. WLAN module (see WLAN module - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 59
follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and the computer. 4. Remove the following components: a. Bottom cover (see Bottom cover on page 28) b. Battery (see Battery on page 45) c. WLAN module (see WLAN module - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 60
3. Remove the power button board from the computer (3). Reverse this procedure to install the power button board. 52 Chapter 4 Removal and replacement procedures - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 61
the top cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the the computer. 4. Remove the following components: a. Bottom cover (see Bottom cover on page 28) b. Battery (see Battery on page 45) c. WLAN module (see WLAN module - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 62
4. Lift the two pieces of Mylar tape that secure the keyboard to the top cover (1). 5. Remove the 47 Phillips PM1.0×2.0 screws (2) that secure the keyboard to the top cover. NOTE: Only one screw is shown in the following image, but you must remove 47 screws to remove the keyboard. Screw locations - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 63
6. Separate the keyboard from the top cover (3). 7. Remove the keyboard. Reverse this procedure to install the keyboard. Component replacement procedures 55 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 64
memory. Starting Setup Utility (BIOS) To start Setup Utility (BIOS), turn HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 65
, or disconnect any device, cable, or cord. 1. From the Start screen, type support, and then select the HP Support Assistant app. 2. Click Updates and tune-ups, and then click Check for HP updates now. 3. Follow the on-screen instructions. 4. At the download area, follow these steps: a. Identify the - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 66
on-screen instructions. NOTE: If you need to stop a diagnostic test, press esc. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device NOTE: Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English only. 1. Go to http://www.hp.com. 2. Click Support & Drivers, and - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 67
6 Specifications Computer specifications Metric U.S. Dimensions Width 32.4 cm 14.72 in Depth 22.0 cm 9.86 in Height (front to back) 1.4 to 1.5 cm 1.34 to 1.42 in Weight 1.62 kg 3.56 lbs Input power Operating voltage and current 18.5 V dc @ 3.5 A - 45 W Temperature Operating 5°C - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 68
Total power consumption Viewing angle Metric U.S. 20.5 cm 32.0 cm 33.8 cm 1920x1080 16,777,216 700:1 (typical) 340 nits (typical) 8.1 in 12.6 in 13.3 in 0.1529 (H) x 0.1529 (V) mm FHD (1920 x 1080) RGB vertical stripe LED Total 6.10 W(Max.) @ cell 1.15W(Max.), BL 4.95 W(Max.) 89° horizontal, 89 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 69
Total power consumption Viewing angle Metric U.S. 20.5 cm 32.0 cm 33.8 cm 2560x1440 16,777,216 700:1 (typical) 340 nits (typical) 8.1 in 12.6 in 13.3 in 0.1146 (H) x 0.1146 (V) mm QHD (2560 x 1440) RGB vertical stripe LED Total 6.10 W(Max.) @ cell 1.15W(Max.), BL 4.95 W(Max.) 85° horizontal, 85 - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 70
Image Recovery-Reinstalls the operating system and all hardware-related drivers and software, but not other software applications. ● Factory Reset steps, see Help and Support. From the Start screen, type help, and then select Help and Support. Creating HP Recovery media HP Recovery Manager is a - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 71
Telephone Numbers booklet included with the computer. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. If you use an external optical drive, it must be connected directly to a USB port - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 72
For more information and steps, see Help and Support. From the Start screen, type help, and then select Help and Support. ● If you need to correct a problem with a preinstalled application or driver, use the Drivers and Applications Reinstall option of HP Recovery Manager to reinstall the individual - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 73
(select models only)-Reinstalls the operating system and all hardwarerelated drivers and software, but not other software applications. ● Factory Reset the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. IMPORTANT: HP Recovery - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 74
3. Select Troubleshoot from the boot options menu. 4. Select Recovery Manager, and then follow the on-screen instructions. Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 75
8 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 76
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 77
end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 78
audio, product description 2 audio-out (headphone) jacks 10 B backups 62 battery removal 45 spare part number 18, 19, 45 BIOS determining version 56 HP Recovery Manager 66 bottom 15 bottom cover removal 28 spare part number 18, 21 buttons left TouchPad 6 power 8 right TouchPad 6 C cables, service - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 79
spare part numbers 18 memory card reader, identifying 11 memory module product description 1 serviceability 3 solid-state drive 1 video 2 webcam 2 wireless 2 product name 1 product name and number, computer 14 R recovery discs 63, 66 HP Recovery Manager 64 media 66 options 62 starting 65 supported - HP Spectre 13t-3000 | HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 80
using 56 slots memory card reader 11 security cable 10 solid-state drive precautions 23 product description 1 removal 29 spare part numbers 18, 21, 29 speaker assembly removal 36 spare part number 18, 21, 36 speakers identifying 13 specifications computer 59 display 60, 61 supported discs, recovery
HP Spectre 13 Ultrabook
Maintenance and Service Guide
IMPORTANT! This document is intended for
HP authorized service providers only.