HP StorageWorks 2/128 HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG
HP StorageWorks 2/128 - SAN Director Switch Manual
 |
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 2/128 manual content summary:
- HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 1
HP StorageWorks Fabric OS 5.0.5e release notes Part number: AA-RW1WG-TE Seventh edition: August 2007 - HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 2
Legal and notice information © Copyright 2007 Hewlett-Packard Development Company, L.P. © Copyright 2004-2007 Brocade Communications Systems, Incorporated The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the - HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 3
the following switches only. • HP StorageWorks Core Switch 2/64 (SilkWorm 12000) and HP StorageWorks SAN Director 2/128 in Chassis Config modes 3 and 4 only. Devices supported See the HP StorageWorks SAN design reference guide for supported devices: http://h18000.www1.hp.com/products/storageworks/san - HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 4
to get the most benefit from the SAN. Table 1 Current supported Fabric OS versions Model Brocade 4Gb SAN Switch for HP c-Class BladeSystem Brocade 4Gb SAN Switch for HP p-Class BladeSystem HP StorageWorks Core Switch 2/64 HP StorageWorks SAN Director 2/128 Earliest version Recommended version - HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 5
HP StorageWorks Core Switch 2/64 CPU and memory size are limited in their capacities to accommodate the new firmware. Attempting to download Fabric OS 5.1.0 or later firmware to a Core Switch 2/64 model results in a "Firmwaredownload failed" error. Fabric OS 5.1.x is not supported on the Brocade 4Gb - HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 6
US. Beginning in 2007, DST will begin defaults to zero. • tstimezone - zonename - The name of the zoneinfo time zone; will vary as additional time zones are added. For example, to display the current time zone setup, then change them to GMT-3:30: switch:admin> tsTimeZone Time Zone Hour - HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 7
to the switch. In Fabric Manager's Options dialog, set the FTP server setting to the external option. In the Firmware Download dialog, select the external ftp server to download. Fabric Manager does not support importing the image into the Fabric Manager firmware repository. HP StorageWorks Fabric - HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 8
2/32, Core Switch 2/64, SAN Director 2/128. The workaround if not upgrading to this latest 5.0.5a release is to remove and reinsert the cable, or run portDisable/portEnable. In rare cases, the zoning daemon (zoned) caused the switch to panic during HAfailover. An abrupt power failure on a port - HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 9
SAN Switch 2/32, SAN Director 2/128, SAN Switch 2/8V and SAN Switch 2/16V platforms. A phantom device on an L-port disappears after HAfailover/hareboot, and a private device is no longer in the name server database, affecting the SAN Switch 2/32, Core Switch 2/64, SAN Director 2/128, SAN Switch 2/8V - HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 10
Due to Performance Server Daemon (PSD) panic assertions, the standby CP on all Directors can result in a reboot loop. Zone changes cause the CALD (Common Access causing read past end of buffer, leading to core dump. Fspf daemon assert causes switch panic and hafailover during fspf updates from active - HP StorageWorks 2/128 | HP StorageWorks Fabric OS 5.0.5e Release Notes (AA-RW1WG - Page 11
/portenable the switch port once the port has become an L_Port. Though there are no environmental problems, the status HBAs and 4Gb Brocade switches may not automatically be re-established. switch is running NTP, first disable NTP with the tsclockserver LOCL command, then issue the date command. HP StorageWorks
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
HP StorageWorks Fabric OS 5.0.5e
release notes
Part number: AA-RW1WG-TE
Seventh edition: August 2007