HP StorageWorks 2/140 director 2/140 rack mount kit installation instructions
HP StorageWorks 2/140 - Director Switch Manual
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 2/140 manual content summary:
- HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 1
hp StorageWorks director 2/140 rack mount kit installation instructions Part Number: AA-RTDDB-TE/958-000280-001 Second Edition (January 2003) These installation instructions provide the procedures used for installing an HP StorageWorks Director 2/140 in an appropriate rack. - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 2
. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information is provided "as is" an additional warranty. Printed in the U.S.A. director 2/140 rack mount kit installation instructions Second Edition (January 2003) Part Number: - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 3
Help vi HP Technical Support vi HP Website vii HP Authorized Reseller vii Installation Instructions Rack Mount Kit Checklist 1 Mounting Hardware 1 Brackets 2 Required Items 3 Rack Mounting Guidelines 3 Tips for Installing More than One Switch 3 Moving the Director 2/140 4 Installing the - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 4
- HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 5
About this Guide These installation instructions provide information to help you: • Install the HP StorageWorks™ Director 2/140 in an appropriate rack. • Perform the power-on self test. • Contact technical support for additional assistance. Intended Audience This book is intended for use by - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 6
Monospace, italic font Sans serif font (http://thenew.hp.com) Symbols in Text These symbols may be found in the text of this guide. They have the specific instructions. NOTE: Text set off in this manner presents commentary, sidelights, or interesting points of information. iv director 2/140 rack - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 7
Guide Symbols on Equipment Any enclosed surface or area of the equipment marked with these symbols indicates the presence of electrical shock hazards. Enclosed area contains no operator serviceable guidelines for manually handling material. director 2/140 rack mount kit installation instructions v - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 8
before calling: • Technical support registration number (if applicable) • Product serial numbers • Product model names and numbers • Applicable error messages • Operating system type and revision level • Detailed, specific questions vi director 2/140 rack mount kit installation instructions - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 9
HP Authorized Reseller For the name of your nearest HP Authorized Reseller: • In the United States, call 1-800-345-1518 • In Canada, call 1-800-263-5868 • Elsewhere, see the HP website for locations and telephone numbers: http://thenew.hp.com. director 2/140 rack mount kit installation instructions - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 10
- HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 11
Installation Instructions This section describes the procedures used for installing a StorageWorks Director 2/140 in an appropriate HP, or comparable, 19-inch Electronic Industries Association (EIA) rack: • HP 9000 series, 10000 series and 11000 series racks • HP rack system/e or 19-inch EIA rack - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 12
Installation Instructions Brackets Brackets and rails included in the kit are shown in Figure 1: 1 Two (2) rear shelf brackets 4 Two (2) rear mounting plates 5 Two (2) front mounting brackets 2 4 1 3 5 Figure 1: Brackets included in kit 2 director 2/140 rack mount kit installation instructions - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 13
than one switch, HP recommends installing an optional Power Distribution Unit (PDU) in the bottom of the rack. HP ships two PDU power cords with the Director 2/140. • Make sure to connect power cables as you install each individual switch. director 2/140 rack mount kit installation instructions 3 - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 14
HP strongly recommends installing the Director 2/140 in the lowest position in the rack. 2. Along an exterior vertical rail of the rack cabinet, determine the position of the bottom of the shelf bracket and count 1 U up from this location. 4 director 2/140 rack mount kit installation instructions - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 15
Installation Instructions 3. Use a straight edge to locate the corresponding rack hole along the interior vertical rail of the cabinet. Figure 2: Angle brackets mounted on vertical cabinet rails in HP 9000, 10000 and 11000 series rack director 2/140 rack mount kit installation instructions 5 - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 16
: Center each shelf bracket between the interior vertical rails of the rack cabinet. Figure 3: Shelf brackets mounted in HP 9000, 10000 and 11000 series rack 8. Continue to "Attaching the Mounting Hardware to the Director 2/140" on page 8. 6 director 2/140 rack mount kit installation instructions - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 17
an HP rack system/e or 19-inch EIA rack. 1. Determine the appropriate placement for the Director inside the rack. NOTE: HP strongly recommends installing the Director 2/140 in Attaching the Mounting Hardware to the Director 2/140" on page 8. director 2/140 rack mount kit installation instructions 7 - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 18
Installation Instructions Attaching the Mounting Hardware to the Director 2/140 Use these steps to secure the mounting hardware to the Director 2/140. NOTE: All mounting brackets are attached to the Director 2/140 using 10/32 x 3/8-inch flathead countersunk Phillips screws. 1. Locate the two front - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 19
. CAUTION: The Director 2/140 weighs approximately 167 lbs. Do not attempt to lift or carry the Director 2/140 with fewer than two people. Failure to observe this CAUTION may result in injury to personnel or damage to the Director 2/140. director 2/140 rack mount kit installation instructions 9 - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 20
Installation Instructions Installing the Director 2/140 in the Rack Use these steps to maneuver the Director 2/140 into the rack: 1. Using a lift device, position the Director 2/140 at the front of the cabinet. 2. If necessary, adjust the lift height so that the bottom of the Director 2/140 is - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 21
• Two (2) 110-volt AC power cords (for Director 2/64 only) IMPORTANT: The 110-volt AC power cords provided in the kit are not for use with the Director 2/140. For more information, see the hp StorageWorks director power cord advisory instruction. WARNING: To prevent electric shock, use only the - HP StorageWorks 2/140 | director 2/140 rack mount kit installation instructions - Page 22
Analysis Procedures" section in the hp StorageWorks director 2/140 service manual. Further Setup For additional information on installing and configuring the Director 2/140, please see the hp StorageWorks director 2/140 installation guide. 12 director 2/140 rack mount kit installation instructions
hp StorageWorks
director 2/140 rack mount kit
installation instructions
Part Number: AA-RTDDB-TE/958-000280-001
Second Edition (January 2003)
These installation instructions provide the procedures used for
installing an HP StorageWorks Director 2/140 in an
appropriate rack.