HP StorageWorks 2/140 FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks
HP StorageWorks 2/140 - Director Switch Manual
 |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 2/140 manual content summary:
- HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 1
These Release Notes contain late-breaking and supplemental information for the HP StorageWorks Director 2/64 and Director 2/140. For the latest version of these Release Notes and other director documentation, access the HP storage website at: http://www.hp.com/country/us/eng/prodserv/storage.html. - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 2
and Windows 2000® are U.S. registered trademarks of Microsoft Corporation. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions constituting an additional warranty. Printed in the U.S.A. Director Release Notes Fourth Edition (December 2003) Part Number: AA-RTDVD- - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 3
HP StorageWorks Director 2/64 and Director 2/140. Be sure to read these Release Notes before installing a Director 2/64 and Director 2/140. , page 5 ■ Firmware Version 05.02.00-13, page 5 ■ Other Director Documentation, page 5 ■ CD-ROM Directory Structure, page 6 ■ Supported Configurations, page 8 - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 4
, page 20 ■ Upgrading Firmware in Director 2/64 may Time-out if Very Busy, page 20 ■ HSG80 Transparent Mode Not Supported with IBM AIX, page 21 ■ HSG80 Transparent Mode Not Recommended with Controller in SCSI-3 Mode with HP-UX Operating Systems, page 21 ■ ISL Disconnect Causes NOS Error with the - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 5
is intended for customers who purchased the HP StorageWorks Director 2/64 or Director 2/140. Firmware Version 05.02.00-13 Firmware Version 05.01.00-24 is the initial firmware released with the Director 2/64 and Director 2/140. A copy of the latest version of the firmware, 05.02.00-13 (as of this - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 6
-001 ■ HP StorageWorks Director 2/64 Service Manual, AA-RS2EC-TE ■ HP StorageWorks M-Series Rack Mount Kit Installation Instructions, AA-RQZPD-TE/958-000292-001 ■ HP StorageWorks CLI Reference Guide for Directors and Edge Switches, AA-RQ7AD-TE ■ HP StorageWorks SNMP Reference Guide for Directors and - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 7
2/64 Installation Guide) - AA-RS2EC-TE - (HP StorageWorks Director 2/64 Service Manual) - AA-RQ7AD-TE - (HP StorageWorks CLI Reference Guide for Directors and Edge Switches) - AA-RQ7BD-TE - (HP StorageWorks SNMP Reference Guide for Directors and Edge Switches) - AA-RS2DC-TE - (HP StorageWorks SAN - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 8
to HP StorageWorks SAN High Availability Planning Guide. ■ Fabric Elements - Each fabric element is defined by a unique domain ID that ranges between 1 and 31; therefore, the theoretical limit of interconnected directors in a single fabric is 31. The supported limit of interconnected switches in - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 9
long-wave optical transceiver modules in a switch. Multi-mode cables should use 50/125 optical fibers, and single-mode cables typically use 9/125 optical fibers for distances up to 10 km. Verify that connectors interfacing with the Director 2/64 and Director 2/140 use LC Duplex connectors with a PC - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 10
that a failure should occur. Refer to the switch or director Product Manager user guide for more information. Embedded Web Server (EWS) also provides an option to print or save product configuration to a file. Refer to the HP StorageWorks Embedded Web Server User Guide for more information. 10 - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 11
occur. Refer to the switch or director Product Manager user guide for more information. Embedded Web Server (EWS) also provides an option to print or save product configuration to a file. Refer to the HP StorageWorks Embedded Web Server User Guide for more information. Director Release Notes 11 - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 12
ZZ. Note: The Director 2/140 and Edge Switch 2/24 cannot be director products this results in a failover to the redundant CTP card, with no interruption of Fibre Channel service. On switch products with no redundant CTP, the processor IPLs and resets the configuration to factory defaults. Firmware - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 13
can be avoided. This issue is corrected with Version 05.02.00-13 firmware. Note: Step 4 of the following procedure is not required if you are upgrading from Version 05.xx.xx or later. To safely upgrade Firmware on a director: 1. Upgrade HAFM software on the HAFM server/appliance to Version 07.01.00 - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 14
, Director 2/64, Edge Switch 2/32, Edge Switch 2/24, and/or Edge Switch 2/16, and they are running firmware Version 05.02.00-13, you need to upgrade HAFM to Version 07.01.00-09 (minimum). For more information on upgrading software versions, refer to the HP StorageWorks HA-Fabric Manager User Guide - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 15
Fabric directors and edge switches, when you select IP addresses for edge switches, directors, and when using firmware Version 05.01.00-24 or greater and cannot be disabled. All HP-approved host , documentation, or retrain Storage Area Network (SAN) administrators. Hard Zoning controls access at the - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 16
Firmware Version 05.02.00-13 supports the following management information base (MIB) versions on all products: ■ Fabric Element MIB: V1.1 ■ MIB-II MIB: RFC-1213, non-implemented sections are not included ■ FCEOS MIB: V2.0 ■ SNMP Framework MIB: RFC-2271 (1997/09/30) ■ FA MIB: V3.1 16 Director - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 17
number of zones is based on a zone name with a maximum of 32 characters. On all edge switches and directors except the Director 2/140, the maximum number of zones decreases if full 64 character names are used. The supported limits are based on two members per zone. Zone set sizes are affected - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 18
is the recently released HP StorageWorks Edge Switch 2/12, which currently has an interim firmware version specific for the Edge Switch 2/12, Version 05.05.00-12. This firmware cannot be used for any other edge switch or director. This interim version is compatible with firmware Versions 05.01.00 - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 19
section describes the known issues related to the Director 2/64 and Director 2/140. Embedded Web Server access to modify zones 255) zone. This will be corrected in a future firmware release. Workaround Using HAFM to manage directors and edge switches will allow you to modify zones in zone sets with - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 20
the IP address information in the Director 2/140. Occasionally the maintenance port of the Director 2/140 may be set at an incorrect firmware. Upgrading Firmware in Director 2/64 may Time-out if Very Busy When upgrading firmware on Director 2/64 which is very busy with fabric operations, the firmware - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 21
Director 2/64 and Director 2/140. Transparent mode is not supported at this time. Workaround None. HSG80 Transparent Mode Not Recommended with Controller in SCSI-3 Mode with HP between directors or switches, the Fibre Channel Adapter model FCA2354 transmits a Not Operational Sequence (NOS) error. - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 22
for Speed Auto-Negotiate Auto-negotiate is supported. However, HP recommends that the port speed for E_Ports (for Interswitch Links, or ISLs) be set to a specific port speed (1Gb/sec or 2Gb/sec, as appropriate for the speed of the directors or edge switches being connected) instead of to Negotiate - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 23
may not be completed. Workaround If this error occurs when trying to change port speed of all ports on a Director 2/140, you can change the port speeds individually. Adding a Defective ISL Connection May Cause all ISLs to Segment Between the Two Switches or Directors Adding a defective ISL (due to - HP StorageWorks 2/140 | FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 24
Firmware: System File Error Firmware Successfully Loaded Although the error message indicates that the firmware has been successfully loaded, no changes were actually made to the switch or its firmware. Workaround Perform the firmware 602 and 604 occur in a Director 2/64 and coincide with very high
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
Release Notes
hp
StorageWorks
Director
Product Version:
FW V05.02.00-13
HAFM Notebook SW V07.01.00-09
HAFM 1U Appliance SW V07.02.00-09
Fourth Edition (December 2003)
Part Number:
AA–RTDVD–TE/958–000276–004
These Release Notes contain late-breaking and supplemental information for the
HP StorageWorks Director 2/64 and Director 2/140.
For the latest version of these Release Notes and other director documentation, access the HP
storage website at:
.