HP StorageWorks 2/140 FW 08.01.00 HP StorageWorks Director and Edge Switch Rel
HP StorageWorks 2/140 - Director Switch Manual
 |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 2/140 manual content summary:
- HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 1
HP StorageWorks Director and Edge Switch release notes Part number: AA-RW8NA-TE/958-000276-009 First edition: (November 2005) - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 3
may not allow setting of RADIUS server properties • HSG80 transparent mode not recommended in SCSI-3 mode with HP-UX • Error can occur if multiple UPM cards are hot inserted too quickly • Support for speed Auto-Negotiate • Certain applications do not receive SNMP traps • Possible switch reset after - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 4
appropriate Director or Edge Switch service manual. Other documentation In addition to these release notes, HP provides additional documentation available on the following HP web site: http://h18006.www1.hp.com/storage/saninfrastructure.html. Supported configurations Operation of multiple switches - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 5
hop count in a single path through a fabric is three. Because this number is subject to change, contact your HP-authorized service representative for the current hop count supported by a single fabric path. The hop count is equal to the number of ISL connections traversed in a single path, not - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 6
is automatically blocked, and the user is notified. Users can unblock ports manually to allow the ISL or node to recover when the source of the problem is identified. Malfunctions in connected hardware or Denial of Service (DoS) attacks can cause devices to attempt repeated log-ins, which in extreme - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 7
snmp-Commands that display the switch SNMP configuration, Access table values, Target table values, users configured in the USM table, Security-to-Group HAFM is manages products in larger SANs. HAFM Basic provides configuration support for Port Fencing policies, and enables you to back up configuration - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 8
universal port module (UPM) on the Director 2/64 or Director 2/140. Support for this feature in the Edge Switch and Director management applications is as follows new command to display overall optic health for ports that support enhanced digital diagnostics, and a command that displays the overall - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 9
Fabric mode only) cannot be activated. This prevents fabric merge problems when zones are removed accidentally or when new unzoned devices are added support added to firmware 07.xx.xx for CLI management. • Support for standard syslog logging functions. You can configure a central logging service - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 10
modifications. Documentation released with firmware 08.01.00 To support these products, McDATA Corporation (the product developer) and HP (the product OEM) provide documentation. The HP documents include all information that HP has incorporated into the products to date. The McDATA documents include - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 11
-14 08.01.00-14 08.01.00-14 HAFM version (minimum) 04.00.01 (HP EFCM) 04.01.02-14 (SDCM) 04.02.00-40 (HP EFCM) 04.02.00-40 (SDCM) 06.00.00-45 (HP EFCM) 06.00.02-06 06.03.01-05 07.01.00-09 (Notebook Server - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 12
rmware 08.01.00 requires HAFM 07.01.00 or later, check with HP Customer Support for the latest shipping version of HAFM. HAFM should be at the minimum rmware, HP recommends that you back up the Director or Edge Switch configuration. See the HP StorageWorks Director Element Manager user guide for more - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 13
Contact HP Customer Support if you receive this message. Some customer environments use application or host software that is affected by the restart of the Director CTP during a HotCAT download operation. Applications that rely on inband management servers are especially prone to problems - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 14
running an earlier version of firmware, the risk of an outage increases due to the NVRAM issue. If an outage compromises system integrity, HP recommends that the Edge Switch firmware upgrade be a scheduled maintenance action that anticipates the failure of switch connectivity. This issue has been - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 15
or Director installation and service manual-Provides complete procedures for obtaining firmware from the HP web site and downloading firmware to the Edge Switch or Director using HAFM. • The Edge Switch or Director Element Manager online help and user guide-Provide instructions for downloading firmware - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 16
05.xx.xx fabric, HP recommends that you downgrade the unit before installation. Downgrading to 05.05.00 is supported only on first-generation 01.00 before downgrading any products in the fabric to 05.xx.xx. This problem only exists with Director 2/140s in the fabric. HAFM displays a warning message - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 17
. For more information on upgrading software versions, see the HP StorageWorks HA-Fabric Manager user guide. The features of this software version are described in the . Zoning limits Table 3 lists the supported zoning limits for the Edge Switches and Directors. Director and Edge Switch release notes - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 18
HAFM Zoning Library Number of zones in HAFM Zoning Library Number of zone sets in HAFM Zoning Library Number of end ports Number of devices supported (including loop devices) Maximum value 2048 1024 2048 4096 32 2048 1024 64 1024 1024 Using the same firmware level All Directors and Edge Switches - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 19
After purchasing and installing the feature key, you can configure for E_Port connections on any of the active ports. The feature key includes distance support. With firmware 06.00.00 and later, the Edge Switch 2/12 ships with five BB_credits allocated to each port. After activation of the Full Fabric - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 20
cards. Workaround To avoid this problem, wait longer than one minute between hot insertion of each UPM card. HP recommends waiting at least two this error, reseat the UPM card. Support for speed Auto-Negotiate Auto-negotiate is supported. However, HP recommends that the port speed for E_Ports - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 21
Possible switch reset after power failure or power-down sequence In extremely rare instances, after a power failure or power-down sequence, an Edge Switch or Director configuration may be reset to factory default settings. This is evident when HAFM is unable to communicate with the Edge Switch or - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 22
make-ssh-known-hosts script is no longer included - TSS has been removed - MD5 is now external, in the OpenSSL library - RC4 support has been replaced with ARC4 support from OpenSSL - Blowfish is now external, in the OpenSSL library [The licence continues] Note that any information and cryptographic - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 23
RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 24
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 25
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 26
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - HP StorageWorks 2/140 | FW 08.01.00 HP StorageWorks Director and Edge Switch Rel - Page 27
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
 |
 |
HP StorageWorks
Director and Edge Switch release
notes
Part number: AA-RW8NA-TE/958–000276–009
First edition: (November 2005)