HP StorageWorks 2/16 Brocade Web Tools Administrator's Guide (53-0000194-01, N
HP StorageWorks 2/16 - SAN Switch Manual
View all HP StorageWorks 2/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 2/16 manual content summary:
- HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 1
Web Tools Administrator's Guide Supporting Fabric OS v5.2.0 Publlication Number: Publication Number: 53-0000194-01 Publlication Date: Publication Date: 09/29/06 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 2
or service names are or may be trademarks or service marks of, and are used to identify, products or services of their code, please visit http://www.brocade.com/support/oscd. Export of technical data contained in Communications Systems, Inc. 1745 Technology Drive San Jose, CA 95110 Tel: 1-408-333 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 3
Guide Advanced Web Tools Administrator's Guide 53-0000522-07 Web Tools Administrator's Guide 53-0000522-08 Web Tools Administrator's Guide , user administration, and zoning wizards. September 2004 Updates to support new switch types (200E, 48000) and Fabric OS v5.0.1, including switchAdmin - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 4
Document Title Web Tools Administrator's Guide Web Tools Administrator's Guide Web Tools Administrator's Guide Publication Number 53-1000049-01 53-1000049-02 53-1000194-01 Summary of Changes Publication Date Updates to support new switch types (4900, 7500) and Fabric OS v5.1.0, including FCR, - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 5
Chapter 1 Introducing Web Tools Requirements, Installation, and Support 1-1 Requirements 1-2 Installing a Web Tools License 1-6 11 Admin Domains and Switch WWN 1-11 Admin Domains and Zoning 1-12 Role-Based Access Control 1-12 Web Tools Administrator's Guide iii Publication Number: 53 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 6
2-12 AD/User/Role Indicator 2-12 Displaying Tool Tips 2-12 Refresh Rates 2-13 Displaying Switches in the Fabric 2-14 Using Web Tools and Secure Mode 2-15 Web Tools Access and 16 Working with Web Tools: Recommendations 2-16 iv Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 7
Activating a License on a Switch 3-15 Removing a License from a Switch 3-15 Administering High Availability 3-16 Launching the High Availability Module 3-16 Synchronizing Services on the CP 3-18 Initiating a CP Failover 3-19 Web Tools Administrator's Guide v Publication Number: 53-0000194 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 8
Switch Using Beaconing 3-28 Maintaining Configurations and Firmware Maintaining Configurations 4-1 Backing Up a Configuration File 4-2 Restoring a Configuration 4-3 Performing a Firmware Download Trunking Mode on a Port 6-3 vi Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 9
, and Tunnels 7-9 Enabling Persistently Disabled Ports 7-11 Managing the FCIP Tunneling Service 7-11 Managing IP Interfaces for a GbE Port 7-12 Managing IP Routes for Domain Module 8-8 Creating and Populating Domains 8-8 Web Tools Administrator's Guide vii Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 10
Creating and Populating Zones 9-11 Adding and Removing Members of a Zone 9-12 Renaming Zones 9-13 Copying Zones 9-13 Deleting Zones 9-14 viii Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 11
, and Zones 9-31 Searching for Zone Members 9-31 Clearing the Zoning Database 9-32 Using Zoning Wizards 9-32 Best Practices for Zoning 9-35 Web Tools Administrator's Guide ix Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 12
Printing Graphs 10-15 Modifying Graphs 10-16 Chapter 11 Using the FC-FC Routing Service Supported Switches for Fibre Channel Routing 11-1 About Fibre Channel Routing 11-1 McData Interoperability 11-2 Setting Fabric ID 11-11 x Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 13
Alarm Information 13-7 Displaying an Alarm Configuration Report 13-7 Displaying Alarms 13-8 Configuring Email Notifications 13-9 Configuring the Email Server on a Switch 13-9 Configuring the Email Alert Recipient 13-9 Web Tools Administrator's Guide xi Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 14
Chapter 15 Administering the iSCSI Target Gateway Supported Platforms for iSCSI 15-1 About the iSCSI Service 15-1 Common Functions in the iSCSI iSCSI Fibre Channel Zone 15-20 Managing and Troubleshooting Accessibility 15-23 Chapter 16 Routing Traffic About Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 15
13 Configuring SNMP Information 17-14 Managing RADIUS Service 17-15 Enabling and Disabling RADIUS Service 17-16 Configuring the RADIUS Service 17-17 Modifying the RADIUS Server 17-17 Port Connectivity Configuration 18-12 Web Tools Administrator's Guide xiii Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 16
Chapter 19 Limitations General Web Tools Limitations 19-1 Platform-Specific Limitations 19-6 Limitations of Using a Mozilla Browser 19-7 Index xiv Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 17
on how to manage your fabric and switches using the Web Tools interface. • Chapter 4, "Maintaining Configurations and Firmware", provides information about uploading and downloading configuration files and downloading firmware. • Chapter 5, "Managing Your Ports", provides information about - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 18
Fabric Watch", provides information on how to use the Fabric Watch feature to monitor the performance and status of switches and alert you when problems arise. • Chapter 14, "Administering Extended Fabrics", provides information on how to configure a port for long distance. • Chapter 15 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 19
switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware configurations are tested and supported to specific switches. This document does not support all Fabric OS versions. This document is specific to - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 20
For readability, command names in the narrative portions of this guide are presented in mixed lettercase: for example, switchShow. In actual examples, command lettercase is often all lowercase. Otherwise, this manual specifically notes those cases in which a command is case sensitive. Notes - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 21
Brocade and industry-specific documentation that you Guide • Secure Fabric OS Administrator's Guide SilkWorm 48000 • SilkWorm 48000 Hardware Reference Manual • SilkWorm 48000 QuickStart Guide • FR4-18i Hardware Reference Manual • FC4-48 Hardware Reference Manual Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 22
Mount Kit Installation Procedure • Mid-Mount Rack Kit Installation Procedure SilkWorm 7500 • SilkWorm 7500 Hardware Reference Manual • SilkWorm 7500 QuickStart Guide • SilkWorm 7500 Fan Assembly Replacement Procedure • SilkWorm Mid Sized Power Supply Replacement Procedure SilkWorm 4900 • SilkWorm - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 23
Reference Manual • SilkWorm Multiprotocol Router Model AP7420 QuickStart Guide • SAN performance analysis to enhance performance tuning, increase productivity, optimize resource utilization, and reduce costs. Extended Fabrics Supports the reliable, high-speed connectivity of SilkWorm switches - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 24
Information • Technical Support contract number, if applicable • Switch model • Switch operating system version • Error numbers and messages received • supportSave command output • Detailed description of the problem and specific questions • Description of any troubleshooting steps already performed - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 25
SilkWorm 3800 and 3900- Nonport side of the chassis • SilkWorm 4100, 4900, and 7500-On the switch ID pull-out tab located inside the chassis on the port side on the left • SilkWorm 12000, your suggestions for improvement. Web Tools Administrator's Guide xxiii Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 26
xxiv Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 27
for Brocade Advanced Fabric Services, including Advanced Zoning, Guide for information about the EZSwitchSetup interface. This chapter contains the following sections: • "Requirements, Installation, and Support and Support Before you install Web Tools on your workstation, verify that your switches - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 28
0_06 1. Java Plug-in 1.4.2_08 is also supported, although Java Plug-in 1.5.0_06 is the and fully tested. Table 1-2 Supported Platforms Operating System Browser RH Enterprise fabrics comprising 15 switches or less • 512 MB or more RAM for fabrics comprising more than 15 switches A minimum of - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 29
is also supported. If you try to launch Web Tools without any Java Plug-in installed, • Internet Explorer automatically prompts and downloads the proper Java Plug-in. • Firefox downloads the most uses the existing Java Plug-in. Web Tools Administrator's Guide 1-3 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 30
change without notice. 2. Select JRE 5.0 Update 6. 3. Follow the instructions to install the JRE. 4. Create a symbolic link from this location the browser to a switch running Fabric OS 5.2.0 or later to install JRE 1.5.0_06. Web Tools will guide you through the steps to download the proper Java Plug - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 31
Configuring the Java Plug-In If you are managing fabrics with more than 10 switches or 1000 ports, or if you are using the iSCSI Gateway module extensively, the Java Runtime Parameters field to insert your cursor in the field. Web Tools Administrator's Guide 1-5 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 32
support multiple logical switches (domains), a license key applies to all domains within the chassis. To determine whether a license is already installed on a switch, follow the instructions 1. Log in to the switch via telnet (see the Fabric OS Administrator's Guide for more information), using an - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 33
instructions provided. Value Line Licenses If your fabric includes a switch with a limited switch license and you are launching Web Tools using that switch, if the fabric exceeds the switch warn you that your fabric size exceeds the supported switch configuration limit and tells you how long you - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 34
compatible with Fabric OS 5.2.0, see Table 1-1. Web Tools also supports HTTPS protocol, if that protocol is enabled for the switch. For more information on enabling the HTTPS protocol on your switch, see the Fabric OS Administrator's Guide. To launch Web Tools 1. Launch the Web browser and type - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 35
1 Figure 1-4 EZSwitchSetup Interface Figure 1-5 Web Tools Interface Web Tools Administrator's Guide 1-9 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 36
presented within an Admin Domain does not hide fabrics, chassis, switches, and slots; however, the attributes of switch ports and end devices are filtered based on Admin Domain membership. such as Accounting or Engineering. 1-10 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 37
switches specifically Switch WWN Admin Domains are treated as fabrics. Because switches cannot belong to more than one fabric, switch WWNs are converted so that they appear as unique entities in different Admin Domains (fabrics). The switch switch - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 38
that can be performed on a fabric and its associated fabric elements. When you log in to a switch, your user account is associated with a pre-defined role. The role that your account is associated Accounts" on page 17-1. 1-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 39
a lot of time setting up a zoning scheme without actually sending information to the switch. Web Tools does not display a warning when the session is about to time out view the Switch Explorer (shown in Figure 1-5 on page 1-9). Web Tools Administrator's Guide Publication Number: 53-0000194-01 1-13 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 40
a new password and confirm the new password. Optional: Click Options to select an Admin Domain other than your default home domain. 1-14 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 41
can choose a valid Admin Domain or click Cancel to log in to your home domain. Figure 1-10 Invalid Admin Domain Dialog Box Web Tools Administrator's Guide Publication Number: 53-0000194-01 1-15 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 42
Your currently selected Admin Domain is removed from your Admin Domain list. • You initiate a firmware download from the Web Tools Switch Admin module. In this case, you are logged out a few minutes later when the switch reboots. • Your session times out. If you are logged out involuntarily, you are - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 43
and fabric. You should familiarize yourself with these areas, as the procedures in this guide refer to them as follows: • Fabric Tree, which displays a list of all the switches in the fabric. • Fabric Toolbar, which provides access to fabric-wide management interfaces, such as Name Server, zoning - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 44
Switch the Switch Switch Explorer and all windows opened from it. Clicking some of the buttons and icons in the Switch switch. The format of the Switch Explorer varies, Switch Explorer. The following lists these callouts. 1 Fabric Tree 2 Fabric Toolbar 3 Switch View 4 Switch View Button Menu 5 Switch - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 45
. 1 3 Active CP LED Indicators 5 7 2 6 8 4 Active CP Arrow Figure 2-1 Web Tools Switch Explorer View for a SilkWorm 24000 Director (see key to callouts on page 2-2) The active CP in the as shown in the figure. Web Tools Administrator's Guide 2-3 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 46
an example with pointers displaying the various parts of the Web Tools Switch Explorer for a SilkWorm 48000 director. 1 7 3 Active CP LED Indicators 5 Active CP Arrow 8 2 6 4 Figure 2-2 Web Tools Switch Explorer for a SilkWorm 48000 Director (see key to callouts on page 2-2) 2-4 Web - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 47
switch. This is the same format as the Switch Explorer used in Web Tools for the SilkWorm 200E, 3250, 3850, 3900, 4900, and 7500 switches. 1 3 4 7 2 5 8 6 Figure 2-3 Web Tools Switch Explorer View for a SilkWorm 4100 Switch (see key to callouts on page 2-2) Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 48
2 Blade View Figure 2-4 is a view of the Web Tools switch view of the blades you can install in a SilkWorm 48000 director. FR4-18i FC-16 FC4-16IP FC-32 FC4-48 Figure 2-4 Web Tools Switch View of Blades 2-6 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 49
status. You can manually refresh the status of a switch within the fabric by right-clicking that switch in the Fabric Tree support different features, so the information displayed might not always be the same for switches running different versions of Fabric OS. Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 50
2 Admin Domain Context The Admin Domain field in the Switch Explorer displays the currently selected Admin Domain and allows you to change to a different from the Admin Domain drop-down menu. Figure 2-5 Changing the Admin Domain 2-8 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 51
in the previous Admin Domain context are disabled; you must close these windows manually. There might be a delay of up to 30 seconds before the child windows are disabled. You do not need to relog in to the switch, but your account must have access to the requested Admin Domain. Web Tools - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 52
these ports. E_Ports are visible in all domains. In Figure 2-7, only ports 16 through 31 (and not the switch) are owned by the current Admin Domain. E_Ports are visible in all domains. As shown in the figure: • you are using. 2-10 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 53
the SilkWorm 24000 and 48000 directors; therefore, the HA Admin button displays in the Switch View button menu only for those directors. The iSCSI button displays only for the the status legend (see "Status Legend", below). Web Tools Administrator's Guide Publication Number: 53-0000194-01 2-11 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 54
logged in to the switch, and the role switch. In the Switch View, you can mouse over a blade to view the blade ID and its status. It is easier to use the top of the blade to display the tool tip so that you do not inadvertently display the port tool tips. 2-12 Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 55
to view a brief description of the function of the button. Figure 2-9 Mouseover View of Switch Information Refresh Rates Different panels of Web Tools refresh at different rates. Table 2-1 lists the refreshing the fabric: Web Tools Administrator's Guide Publication Number: 53-0000194-01 2-13 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 56
earlier than v5.0.1, the selected switch displays in the same browser window.) The graphic of the selected switch is displayed in the Switch View. Additional switch information is displayed in the Switch Information View. 2-14 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 57
not included in this policy, the Interface Disabled page is displayed when you attempt to access a switch. For instructions on including your workstation in HTTP_POLICY, see the Secure Fabric OS Administrator's Guide. Note If a secure mode change is made in the fabric-that is, secure mode is enabled - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 58
on sectelnet or SSH, see the Secure Fabric OS Administrator's Guide. The SNMP Access Control List is replaced with RSNMP_POLICY and (CLI). You should use the most recently released firmware on your switches. • If switches are accessed simultaneously from different connections (for example, - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 59
the currently selected Admin Domain, regardless of what permission level you have. The exception is the User tab, most of whose functionality does not require switch membership in the current Admin Domain. Web Tools Administrator's Guide 3-1 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 60
Telnet Window" on page 3-3 for information on how to launch a telnet window using Web Tools. The remainder of this section describes basic Switch Admin module procedures that are useful for many switch management operations. 3-2 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 61
. These capabilities are not accessible from Web Tools. For more information on sectelnet or SSH, see the Secure Fabric OS Administrator's Guide. To access telnet through Web Tools 1. Select a switch from the Fabric Tree. You are prompted to log in if the OS is version 5.2.0. Otherwise, the selected - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 62
Channel IP and subnet mask from Web Tools, there is a normal loss of network connection to the switch. If the IP properties have changed, you must close all current windows and restart Web Tools with return to the Network tab. 3-4 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 63
on the system configuration. When one or more IP addresses are configured, the switch forwards all error log entries to the syslog on the specified servers. Up to six servers are supported. See Fabric OS Administrator's Guide for more information on configuring the syslog daemon. When you configure - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 64
section applies only to the SilkWorm 24000 and 48000 directors (bladed switches). To enable or disable a blade 1. Launch the Switch Admin module as described on page 3-3. 2. Click the Blade tab the CP blades. 4. Click Apply. 3-6 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 65
Some system messages identify a switch service by the chassis name, so if you assign meaningful chassis names in addition to meaningful switch names, logs will be more useful. You change the chassis name using the CLI. See the Fabric OS Administrator's Guide for instructions on changing the chassis - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 66
IDs are assigned dynamically when a switch is enabled, you can request a specific ID to resolve a domain ID conflict when you merge fabrics. To change the switch domain ID 1. Launch the Switch Admin module as described on page 3-3. 2. Disable the switch, as described in "Enabling and Disabling - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 67
procedure to reboot the CP and execute the normal power-on booting sequence. To perform a switch reboot 1. Launch the Switch Admin module as described on page 3-3. 2. Click the Firmware Download tab (see Figure 4-2 on page 4-5). 3. Click the Reboot radio button. 4. Click Apply. Changing System - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 68
R_A_TOV Resource allocation timeout value (in milliseconds). This variable works with the E_D_TOV to determine switch actions when presented with an error condition. The default is 10000. The possible range is FICON data. 3-10 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 69
" on page 3-7. 3. Click the Configure tab. 4. Click the Fabric subtab. 5. Make the fabric parameter configuration changes. 6. Click Apply. 7. Enable the switch as described in "Enabling and Disabling a Switch" on page 3-7. Web Tools Administrator's Guide Publication Number: 53-0000194-01 3-11 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 70
setting for the switch is insistent; that is, the same ID is requested during switch reboots, power cycles, CP failovers, firmware downloads, and fabric tuning for a specific application. You cannot modify the first two virtual channels, which are reserved for switch internal functions. - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 71
Apply. 7. Enable the switch as described in "Enabling and Disabling a Switch" on page 3-7. Configuring System Services You can enable or disable Apply. 6. Enable the switch as described in "Enabling and Disabling a Switch" on page 3-7. Web Tools Administrator's Guide Publication Number: 53-0000194 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 72
support multiple logical switches (domains), a license key applies to all domains within the chassis. The licensed features currently installed on the switch are listed in the License tab of the Switch Figure 3-5 License Tab 3-14 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 73
, you must obtain a license key. You can either use the license key provided in the paperpack document supplied with switch software or see the Fabric OS Administrator's Guide for instructions on how to obtain a license key at the Brocade Web site (www.brocade.com). Note Some licenses (for example - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 74
Admin Domain, Synchronized Services and Initiate Failover will be disabled. To launch the High Availability module 1. Select a SilkWorm 24000 or 48000 director from the Fabric Tree. The selected director appears in the Switch View. 3-16 Web Tools Administrator's Guide Publication Number: 53 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 75
color of the Hi Avail button. The HA Admin module contains two tabs: • The Service tab displays information about the switch. When the hardware is configured as a dual switch, the Service tab displays information about both switches. • The CP tab displays information about slot 5 and slot 6. In the - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 76
Status field displays Disruptive Failover Ready, continue with step 3. 3. Click the Synchronize Services button. The Warning dialog box displays. 4. Click Yes and wait for the CPs to complete frame traffic on the fabric. 3-18 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 77
3 Figure 3-7 HA Module Services Tab Initiating a CP Failover A nondisruptive failover might take about 30 4. Click Yes to initiate a nondisruptive failover. 5. When prompted, close the Web Tools Switch Explorer window and all associated windows, and relaunch Web Tools. Web Tools Administrator - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 78
and Switch Events" on page 3-23. Table 3-1 Event Severity Levels Icon and Level Description Critical Critical-level messages indicate that the software has detected serious problems that offline status of a fabric port. Info 3-20 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 79
to sort the events by a particular column. Drag the column divider to resize a column. You can also filter events, as described in "Filtering Fabric and Switch Events" on page 3-23. Web Tools Administrator's Guide Publication Number: 53-0000194-01 3-21 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 80
sort the events by a particular column, and drag the column divider to resize a column. You can also filter events, as described in "Filtering Fabric and Switch Events," next. 3-22 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 81
intervals Note For two-switch configurations, clicking the Events button for a given switch automatically filters out switch service events from the other switch. Chassis service is shown in both the finish time and date. Web Tools Administrator's Guide Publication Number: 53-0000194-01 3-23 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 82
page 3-22. 2. Click Filter. The Event Filter dialog box displays. 3. Click Service. The event service drop-down menu is enabled. 4. Select either Switch or Chassis from the drop-down menu to show only those messages from the logical switch or from the chassis. 5. Click OK. The filter is enabled and - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 83
button is located at the top and bottom of the report. Both buttons have the same function. Figure 3-11 Fabric Topology Report Web Tools Administrator's Guide Publication Number: 53-0000194-01 3-25 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 84
click the Auto Refresh checkbox and specify a time interval at which the Name Server entries will be automatically refreshed To view a list of the switches in the Name Server 1. Click the Name Server icon on the Fabric Toolbar. The Name Server Table displays. Figure 3-12 Name Server Window 3-26 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 85
the Page Setup dialog box. The Print dialog box displays. 5. Select a printer and click OK in the Print dialog box. To display detailed Name Server information displays accessible zone member information specific to that device. Web Tools Administrator's Guide Publication Number: 53-0000194-01 3- - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 86
GUI) light up on the physical switch in a pattern running back and forth across the switch itself. The beaconing is not shown in the GUI. 3. Look at the physical switches in your installation location to identify the switch. 3-28 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 87
Firmware Download" on page 4-4 Maintaining Configurations It is important to maintain consistent configuration settings on all switches /download to gather all the configuration files for the fabric, including Admin Domains and iSCSI Target Gateway information. Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 88
individual backup files for all switches in the fabric. You should avoid copying configurations from one switch to another. When you back the current Admin Domain does not own the switch and you are logged in with any role that allows config upload/download, the following will be saved in the config - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 89
and Disabling a Switch" on page 3-7. You can download configurations only to a disabled (offline) switch. You will only be able to disable the switch if you the Admin Domain you are logged into owns the switch. 3. Click the Configure tab. Web Tools Administrator's Guide 4-3 Publication Number - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 90
enough space, Web Tools displays a message and the download does not occur. If this happens, contact your switch support supplier. Note You can perform a firmware download only when the current Admin Domain owns the switch. 4-4 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 91
//directory_1/my_directory/v5.2.0/release.plist 5. Click Apply. The firmware download begins. You can monitor the firmware download status on the Firmware Download progress bar. About halfway through the download process, connection to the switch is lost and Web Tools invalidates the current session - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 92
4 4-6 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 93
5-2. You access the Port Management module through the Switch View, by clicking the icon for any accessible port. See "Switch View" on page 2-10 for information about accessible ports , you can only view the port information. Web Tools Administrator's Guide 5-1 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 94
an accessible port in the Switch View to launch the Port module displays information about the ports on the switch. Admin Domain considerations: In fabrics where there . • Indirect members are: - non-owned ports on a member switch - non-owned ports to which member devices are attached • All active - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 95
display a table of all the ports for a slot or switch, click the slot or switch in the tree (see Figure 5-2 on page 5-4). - To display information about a specific port, click a port in the tree (see Figure for that GbE port. Web Tools Administrator's Guide 5-3 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 96
and indirect member ports on non-owned switches are accessible in read-only mode and the current Admin Domain and for all ports on switches that are owned by the current Admin Domain, if functionality is enabled. Ports on a non-owned switch that are not E_Ports and are neither direct nor - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 97
the explicit steps are not documented here. To configure FC ports 1. Click a port in the Switch View to launch the Port Management module (see Figure 5-1 on page 5-2). 2. Click the FC in the same state after configuration. Web Tools Administrator's Guide 5-5 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 98
port can be used to connect to another switch. U_Port For a physical FC port: the switch comes up, depending on what type of device or switch switch must be capable of supporting FCR/FCIP features. The EX_Port option is disabled in the wizard if the switch Domain owns the switch. The following - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 99
, IP routes, and FCIP tunnels. You must have an FCIP license installed on the switch to configure the GbE ports. Without an FCIP license, you can view existing FCIP tunnels only when the current Admin Domain owns the switch. Web Tools Administrator's Guide 5-7 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 100
the explicit steps are not documented here. To configure GbE ports 1. Click a port in the Switch View to launch the Port Management module (see Figure 5-1 on page 5-2). 2. Click the GigE port names be unique, it is recommended. 5-8 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 101
to a device, that device is no longer accessible from the fabric. For more information, see the Fabric OS Administrator's Guide. To enable or disable a port 1. Click a port in the Switch View to launch the Port Management module (see Figure 5-1 on page 5-2). 2. Click the FC Ports or GigE Ports tab - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 102
procedure to enable or disable an FC port so that it remains enabled or disabled across switch reboots. Note Ports cannot be persistently enabled or disabled when FMS is enabled. To enable or Yes in the confirmation window. 5-10 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 103
as an N_Port, and is therefore capable of registering with all services of the fabric. The NPIV license must be installed on a switch before NPIV functionality can be enabled on any port. Note NPIV enable/disable is not supported on EX_Ports. To configure NPIV ports, see the Fabric OS Administrators - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 104
switch firmware. Its license might be part of the licensed Paper Pack supplied with switch software, or you can purchase the license separately from your switch the Brocade Ports on Demand licensed product. For instructions, see "Activating a License on a Switch" on page 3-15. 2. Enable the ports, - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 105
two ports, swaps the area IDs, and enables the ports. To swap ports 1. Click a port in the Switch View to launch the Port Management module (see Figure 5-1 on page 5-2). 2. Click the FC Ports tab. 3. the port has been swapped. Web Tools Administrator's Guide Publication Number: 53-0000194-01 5-13 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 106
5 Figure 5-6 Swapping a Port Index Port Index attribute indicates whether the port has been swapped. 5-14 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 107
installing licensed features, see "Managing Licensed Features" on page 3-14.) For additional information about ISL Trunking, see the Fabric OS Administrator's Guide. Use the Trunking tab of the Switch Admin module to view and manage trunks through Web Tools (see Figure 6-1). Web Tools Administrator - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 108
about ISL Trunking groups: • Trunk group number identifier • Master port • Member ports To view information on a trunk group 1. Launch the Switch Admin module as described on page 3-3. 2. Click the Trunking tab. 3. Optional: Click Refresh to refresh the information. 6-2 Web Tools Administrator - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 109
reenable trunking if it has been disabled. Trunking is not supported on logical ports, GbE ports, or EX_Ports. Admin or reenable trunking mode on a port 1. Click a port in the Switch View to launch the Port Management module (see Figure 5-1 on page 5-2). Guide 6-3 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 110
6 6-4 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 111
network, also known as a MetaSAN topology. The GbE ports on the FC4-16IP do not support FCIP tunneling. Note You must have an FCIP license installed on the switch to use the FCIP Tunneling Service. GbE ports configured for FCIP are called "virtual E_Ports" (VE_Ports) or "virtual EX_Ports" (VEX_Ports - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 112
to any domain in particular, but are configurable wherever the switch is owned. For additional information about the FCIP Tunneling Service, see the Fabric OS Administrator's Guide. Fibre Channel initiator Data Center FC SAN SilkWorm VE_Port Fibre Channel initiator IP WAN Network Office FC - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 113
state and resources held for the SCSI write I/O. Note Switches at both end of the tunnels must enable fastwrite; it is supported only on switches running Fabric OS 5.2.0 or higher. FCIP fastwrite reduces will be I/O failure. Web Tools Administrator's Guide 7-3 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 114
supported when there are two or more tunnels going between two SilkWorm 7500 switches and FR4-18i blades. Tape pipelining is not supported (IP) networks through the use of cryptographic security services. IKE (Internet Key Exchange) is the protocol used Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 115
in the denial-of-service of applications, services, or the network • supported on an interface with a secure tunnel. Unsupported with IKE/IPSec The following implementations are currently not supported with IKE/IPSec: • IPV6 • ESP in transport mode • NAT Traversal Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 116
from 1 through 32. You can define up to 32 IKE and 32 IPSec policies per switch. 1 through 32 Encryption Algorithm A mathematical procedure for performing encryption on data. Through the use . Specify the number of seconds 7-6 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 117
the two fabrics. You must configure and enable both the local and remote switch ports to use the FCIP ISL/IFL. Note Admin Domain membership is required tunnel. To configure an IKE or IPSec policy 1. Launch the Switch Admin module as described on page 3-3. 2. Select the IPSec Policies tab. 3. - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 118
of seconds. Configuring Virtual Ports Each GbE port support up to eight virtual ports. To enable FCIP on instructions on configuring the virtual ports. You must configure and enable the ports on both the local and remote switches to utilize an FCIP ISL/IFL. 7-8 Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 119
4 ge0 21 5 ge0 22 6 ge0 23 7 ge1 24 0 ge1 25 1 ge1 26 2 ge1 27 3 ge1 28 4 ge1 29 5 ge1 30 6 ge1 31 7 Web Tools Administrator's Guide 7-9 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 120
values. 6. Follow the steps outlined in the wizard. The wizard guides you through the process of creating an IP interface, an IP route "Managing the FCIP Tunneling Service" on page 7-11 for adding or editing any of the components. 8. Repeat the above steps on the remote switch. 9. Enable the ports - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 121
Enabling and Disabling Ports" on page 5-10 for instructions on enabling persistently disabled ports. Managing the FCIP Tunneling Service This section describes how you can add, edit, , and finally the port configuration. Web Tools Administrator's Guide Publication Number: 53-0000194-01 7-11 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 122
must first delete the corresponding FCIP tunnel. To add a new IP interface 1. Click a port in the Switch View to launch the Port Management module in a separate window (see Figure 5-1 on page 5-2). 2. interface. 7. Click Add. 7-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 123
size for the IP interface and click OK. To delete an IP interface 1. Click a port in the Switch View to launch the Port Management module in a separate window (see Figure 5-1 on page 5-2). 2. Yes in the confirmation window. Web Tools Administrator's Guide Publication Number: 53-0000194-01 7-13 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 124
one default IP route will be automatically created. To add a new IP route 1. Click a port in the Switch View to launch the Port Management module in a separate window (see Figure 5-1 on page 5-2). 2. Click route per GbE port. 7-14 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 125
port in the Switch View to delete an IP route 1. Click a port in the Switch View to launch the Port Management module in a separate • IP address of the remote switch • IP address of the local interface port. • (Optional) WWN of the remote switch • Whether compression, fastwrite, tape pipelining, or - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 126
additional information on configuring the tunnels. To add a new FCIP tunnel 1. Click a port in the Switch View to launch the Port Management module in a separate window (see Figure 5-1 on page 5-2). 2. and corresponding VE_Port. 7-16 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 127
Resize the column to view the full message. To delete an FCIP tunnel 1. Click a port in the Switch View to launch the Port Management module in a separate window (see Figure 5-1 on page 5-2). 2. Yes in the confirmation window. Web Tools Administrator's Guide Publication Number: 53-0000194-01 7-17 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 128
7 7-18 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 129
to assign an Admin Domain to a specific user account is performed in the User tab of the Switch Admin module and not in the using administrative domains: • Admin Domains are supported on fabrics with switches running Fabric OS 5.2.0 or higher. • You 's Guide 8-1 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 130
explicitly added (similar to user-defined Admin Domains), it contains all online devices, switches, and switch ports that have not been assigned to any user-defined Admin Domain. AD0 also zone database") with a legacy fabric. 8-2 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 131
connected to a port has been added to the Admin Domain. - A switch to which the port belongs is a member of the Admin Domain. • all devices. To begin implementing an Admin Domain structure within a SAN, you must set the default zone mode to No Access. Guide 8-3 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 132
the Admin Domains, as shown in Figure 8-1. You can also select a specific Admin Domain from the tree to display detailed information about that Admin Domain, about the online switch, port, and device members of the selected Admin Domain. 8-4 Web Tools Administrator's Guide Publication Number: 53 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 133
a file. • Click Print to print the contents of the table. • Click Search to search for a specific text string in the table. Type the text string in the box that displays on the table, as shown in the table, the text turns red. Web Tools Administrator's Guide 8-5 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 134
-down menu, select Physical Fabric. 3. Click the AD button in the Switch View. The Admin Domain module displays (see Figure 8-1). Refreshing Fabric Information the status for the fabric, including switches, ports, and devices. 8-6 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 135
the changes. That means that any other user looking at the Admin Domain information for the switch will not see the changes you have made until you save them. Click Save in the during the Admin Domain configuration session. Web Tools Administrator's Guide 8-7 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 136
can log in to an active Admin Domain. You cannot log in to an Admin Domain that has been deactivated. The following procedures provide detailed instructions for creating an Admin Domain and for activating or deactivating an existing Admin Domain. 8-8 Web Tools Administrator - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 137
Ports to add all of the ports in the selected switch or slot. • Select a switch, slot, or port and click Add Devices to add all of the devices for the selected element. Optional: Click the Manual button to add offline devices. Web Tools Administrator's Guide 8-9 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 138
is correct. Figure 8-6 Summary View 9. Click Finish to close the wizard. 10. Repeat step 2 through step 9 to create additional Admin Domains. 8-10 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 139
deactivate an Admin Domain no one can use this Admin Domain to log in to a switch. Managing Administrative Domains This section provide information on how to manage Admin Domains after they have want to modify in the left pane. Web Tools Administrator's Guide Publication Number: 53-0000194-01 8-11 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 140
Add Devices to add all of the devices for the selected element. Optional: Click Manual to add offline switches and devices. 5. Remove members from the Admin Domain by selecting them in the as the effective configuration. 8-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 141
save the new Admin Domain configuration to persistent storage. 6. Click Apply to enforce the new Admin Domain configuration as the effective configuration. Web Tools Administrator's Guide Publication Number: 53-0000194-01 8-13 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 142
Admin Domain configuration, all user-defined Admin Domains are deleted and all fabric resources (switches, ports, and devices) are returned to AD0. You cannot clear the Admin Domain configuration No to cancel the operation. 8-14 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 143
SAN) into logical groups of devices that can access each other. For example, you can partition a SAN more switches running different fabric operating systems-you should use the switch specific information about zoning concepts, see the Fabric OS Administrator's Guide. Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 144
are linked to the physical fabric (AD255). The only zone operation supported from AD255 is viewing the complete hierarchical zone database (zone databases of the command line interface. See the Fabric OS Administrator's Guide for additional information. If you implement Admin Domains, the default - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 145
supports default zoning on switches running firmware v5.1.0 or higher. Default zoning on legacy switches (switches running firmware versions prior to v 5.1.0) are not supported. Legacy switches : either All Access or No Access. Web Tools Administrator's Guide 9-3 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 146
the Zone Admin icon is displayed in the Fabric Toolbar but not activated. For specific information on secure fabrics, see the Secure Fabric OS Administrator's Guide. You must be logged into the switch using a user name with one of the following roles associated with it to make changes to the zoning - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 147
means copying the current state of the zoning database on the switch to the Web Tools buffer, overwriting its current contents. In the and logical FC ports; however, GbE ports are not supported for zoning. To verify whether you have any unzoned devices 's Guide 9-5 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 148
all zoning operations. Refreshing Fabric Information This function refreshes the display of fabric elements only (switches, ports, devices, and AL_PAs). It does not affect any zoning element changes or ) or from the View menu. 9-6 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 149
save the changes. That means that any other user looking at the zone information for the switch will not see the changes you have made until you save them. Saving the changes propagates Zone Configurations" on page 9-23. Web Tools Administrator's Guide 9-7 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 150
Fabric Resources View. 3. In the dialog box that appears, select one of the following: • Mixed Zoning • Port Zoning • WWN Zoning • AL_PA Zoning 9-8 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 151
of individual members. You can specify members of an alias using the following methods: • A switch domain and port area number pair, for example, 2, 20 • Device node and device port "Enabling Zone Configurations" on page 9-23. Web Tools Administrator's Guide 9-9 Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 152
Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. 9-10 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 153
9-23. Managing Zones A zone is a region within the fabric in which specified switches and devices can communicate. A device can communicate only with other devices connected to the Zone. The Create New Zone dialog box displays. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-11 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 154
Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. 9-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 155
to save the configuration changes. Since no changes were made to the effective configuration, you do not need to enable the configuration. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-13 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 156
they are on the same arbitrated loop. QuickLoop can be administered using Fabric OS 5.x; however, switches or directors running Fabric OS 5.x cannot be members of a QuickLoop. SilkWorm 24000 and 48000 in the QuickLoop. 9-14 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 157
you want to delete. Note There is a limit of two members per QuickLoop. Only switches capable of running QuickLoop are displayed in the Member Selection List. 5. Click Add Member to Zone Configurations" on page 9-23. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-15 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 158
Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. 9-16 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 159
across the fabric. Fabric Assist zones can be administered using Fabric OS 5.x; however, switches or directors running Fabric OS 5.x cannot be members of a Fabric Assist zone. SilkWorm that is not currently a part of the fabric. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-17 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 160
Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. 9-18 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 161
. 6. Click Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-19 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 162
a group of zones; zoning is enabled on a fabric by enabling a specific configuration. You can specify members of a configuration using the following methods: • 6; WWN7 Other E lements WWW 9 Figure 9-3 Sample Zoning Database 9-20 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 163
. 9. Click Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-21 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 164
click OK. The configuration is renamed in the configuration database. 5. Click Zoning Actions > Save Config Only to save the configuration changes. 9-22 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 165
save the configuration changes. Enabling Zone Configurations Several zone configurations can reside on a switch at once, and you can quickly alternate between them. For example, you might selected zone configuration is enabled. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-23 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 166
on page 9-3. 2. Click Zoning Actions > Disable Zoning. The Disable Config warning displays. 3. Click Yes to save and disable the current configuration. 9-24 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 167
The selected switch appears in the Switch View. The current zone configuration name (if one is enabled) is displayed in the lower portion of the Switch Information View. If no zone configuration is enabled, the field displays "No configuration in effect". Web Tools Administrator's Guide Publication - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 168
. This information is automatically updated every 15 seconds. It is also updated if you manually refresh the Zone Admin module contents by clicking the refresh icon at the lower-right corner from what is seen from the switch. 9-26 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 169
configuration analysis report lists the following: • SAN components (ports, WWNs, and AL_PAs) that are not included in the configuration. • SAN components (ports, WWNs, and AL_PAs) the fabric before running the analysis. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-27 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 170
must click the devices from the Select Devices list and click Add to move them to the Evaluate for Accessibility list. 9-28 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 171
• "Removing Offline Devices from the Zoning Database" on page 9-34 • "Replacing Offline Devices" on page 9-34 • "Defining Device Aliases" on page 9-34 Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-29 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 172
you to configure a WWN as a member in a zone configuration prior to adding that device to the fabric. Specifically, it is useful if you want to add a WWN to all or most zoning entities. The added WWN in the Zone Admin buffer. 9-30 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 173
is an alias, zone, QuickLoop, or FA zone, then the search domain includes elements like switch names and domain numbers, port names and "domain, port" addresses, device WWNs and manufacturer names begin the zone member search. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-31 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 174
and the procedure for accessing the wizards for each task. The wizards are selfexplanatory, so the specific steps are not documented here. Note The left side of each wizard window lists the steps you numbering in this panel. 9-32 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 175
continue to add those unzoned devices or exit the wizard. If there are no more unzoned devices, you must exit the wizard. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-33 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 176
device port. The alias definitions of the devices are saved in the zoning database on the switch, which has a size limit. If database size becomes a concern, reconsider your use of alias The Define Device Alias wizard starts. 9-34 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 177
using the core switch versus an edge switch. • Zone using a director over a switch. A director has more resources to handle zoning changes and implementations. • Zone on the switch you connect to when bringing up Web Tools (the proxy switch). Web Tools Administrator's Guide Publication Number: 53 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 178
9 9-36 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 179
throughput (in megabytes per second) for each port and for the entire switch. The basic-mode Performance Monitor is standard in the Web Tools software. on performance monitoring, see the Fabric OS Administrator's Guide. Web Tools Administrator's Guide Publication Number: 53-0000194-01 10-1 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 180
when the graphs are tiled. Admin Domain considerations: • If you are not the switch owner, you will see the following ports: - E_ports, including EX_Ports - directly basic monitoring graphs on all switches; advanced monitoring graphs are available only on switches that have a Brocade Advanced - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 181
24000 and 48000 directors. Switch Throughput Utilization The port throughput read/write commands on a given port to a specific LUN. For more information, see "Creating SCSI Command support the logical FC ports and GbE ports. Web Tools Administrator's Guide Publication Number: 53-0000194-01 10 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 182
supported port types for each. The port selection lists for each graph display the supported ports for that graph. Table 10-3 Supported 3 1. Blade Aggregate Throughput graph is not supported on the SilkWorm 7500 switch. 2. ALPA Error graph is not supported on the SilkWorm 7500 or on the SilkWorm - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 183
sec in multiples of 2. • For SilkWorm 200E, 3250, 3850, 3900, 4100, 4900, and 7500 switches, the X-axis scales up to 4.0 Gbit/sec in increments of 0.4 Gbps. Port throughput utilization is 10-1 Accessing Performance Graphs Web Tools Administrator's Guide Publication Number: 53-0000194-01 10-5 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 184
different scenarios. Each canvas is saved with a name and an optional brief description. Figure 10-2 Canvas of Eight Performance Monitoring Graphs 10-6 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 185
switch from the Fabric Tree and log in when prompted. 2. Click the Perf button on the Switch the port into the Enter/drag slot,port field, or manually type the slot and port information in the field, in the , 3250, 3850, 3900, 4100, 4900, and 7500 switches enter only a port number. 4. Click OK. The - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 186
to customize. See "Creating Basic Performance Monitor Graphs" on page 10-7 for instructions on creating a graph. 2. For SilkWorm 24000 and 48000 directors, to , 3850, 3900, 4100, 4900, and 7500 switches, proceed to step 3. 10-8 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 187
. Figure 10-3 shows an example of the setup dialog box for the Switch Throughput Utilization graph. Figure 10-3 Switch Throughput Utilization Setup Dialog Box 4. You can perform the following in the displayed in the graph. Web Tools Administrator's Guide Publication Number: 53-0000194-01 10-9 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 188
sections that follow. The advanced monitoring graphs are not supported for GbE ports. Note You must have an Advanced graph displays the traffic between a SID-DID pair on the switch being managed. To create an SID/DID performance graph 1. Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 189
PIDs, a confirmation dialog box displays, reminding you that one graph will be opened for each selection. Click Yes to display the graphs. Web Tools Administrator's Guide Publication Number: 53-0000194-01 10-11 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 190
SCSI vs. IP Traffic Setup dialog box. Only the selected ports are displayed in the SCSI vs. IP traffic graph. 10-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 191
a given port or to a specific LUN on a given port. a SCSI Command Graph 3. Navigate to a switch > slot > port in the Slot/Port supported on the following: • SilkWorm 200E, 4100, 4900, and 7500 • SilkWorm 48000 with an FR4-18i, FC4-16IP, or FC4-48 blade(s) installed Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 192
box displays (see Figure 10-6 on page 10-14). 3. Navigate to a switch > slot > port in the Slot/Port or Alpa Selection List. 4. Click it into the "Enter/drag slot,port" field. You can also manually type the slot and port number, in the format slot,port. 5. Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 193
Save Canvas. A message displays, confirming that the configuration was successfully saved to the switch. Adding Graphs to a Canvas The following procedure assumes that a canvas is already created Graphs" on page 10-10. Web Tools Administrator's Guide Publication Number: 53-0000194-01 10-15 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 194
to save the changes and close the Performance Monitor Canvas dialog box. 8. Click Close to close the Canvas Configuration List. 10-16 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 195
FC-FC Routing Service is supported only on the following switch models: • SilkWorm 7500 switch • SilkWorm 48000 director, when configured with an FR4-18i blade (see the Fabric OS Administrator's Guide for more information) • SilkWorm AP7420 Any of the supported switches listed above are considered - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 196
11 11-2 Fibre Channel routing requires some additional terminology: FC Router A switch running FC-FC Routing Service. EX_Port A type of port that functions somewhat like an E_Port, but does not propagate fabric services or routing topology information from one fabric to another. A VEX_Port is - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 197
switch will operate natively in the future, there is no guarantee that the 5.2.0 version of FCR will work with any future version of McDATA fabric. Note McDATA fabrics are supported clicking New. Follow the instructions in the wizard. See "Viewing and Configuring EX_Ports" on page 11-6. - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 198
Router is connected to a switch in the backbone fabric. 5. switch must be FC Router-capable, as described in "Supported Switches the FC-FC Routing service is disabled, the LSAN Switch View launches the FC Routing module. This button is displayed only for the following switches: • SilkWorm 7500 switch - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 199
to your switch, in both a tabular and tree form. (If FC-FC Routing is disabled, the tables and tree nodes in this tab are empty.) For more detailed information about a specific LSAN fabric http://ip-address-of-lsan-fabric-switch Web Tools Administrator's Guide Publication Number: 53-0000194-01 11-5 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 200
on page 11-7) displays all of the EX_Ports on the switch, including configuration and status information. The ports are sorted by until FC Routing is enabled. For more detailed information about a specific port, click a port name in the table and then click 's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 201
. 3. Click New in the task bar to configure one or more EX_Ports. This launches the port configuration wizard, which guides you through the port configuration process. 4. Follow the instructions in the wizard to configure the EX_Port. You will need to specify the Fabric ID and, if configuring an FC - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 202
port to configure, by clicking in the row. 4. Click Edit Configuration in the task bar. This launches the port configuration wizard, which guides you through the port configuration process. The current configuration values are displayed in the wizard steps. If you choose to configure a disabled port - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 203
port cost 1. Access the Switch Manager in Web Tools. 2. Click FCR in the Switch View. 3. Click the Ex and tree nodes in this tab are empty.) For more detailed information about a specific LSAN zone, click a zone name in the table and then click View Guide Publication Number: 53-0000194-01 11-9 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 204
a count of all the physical and proxy LSAN devices. Note that this count is for all of the LSAN fabrics. 11-10 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 205
tree for more detailed information about a specific device, as shown in Figure 11-7. ID The FC-FC Routing Service must be disabled when , you can enable these ports again manually. The fabric ID for a backbone 1. Access the Switch Manager in Web Tools. 2. Click the FCR in the Switch View. 3. Click - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 206
you select a fabric ID that is already in use. 8. Click OK. 9. Reenable all of the EX_Ports after Web Tools automatically reenables the FC-FC Routing Service. 11-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 207
switch. The dump can be used by developers and troubleshooters at Brocade to help understand what might be contributing to a specific switch A trace dump is generated when: • It is triggered manually (use the traceDump command). • A critical-level LOG Guide Publication Number: 53-0000194-01 12-1 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 208
Switch the supportSave command on the affected switch. This command packages all error You can also configure your switch to automatically copy trace manually or when certain system error messages are logged. This is normally done with assistance from Brocade customer support when diagnosing switch - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 209
problem occurs you can provide your customer support representative with the most detailed information possible. To ensure the best service, you should set up for automatic transfer as part of standard switch configuration, before a problem problem. See the Fabric OS Administrator's Guide manually - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 210
switch (such as fan, temperature, and power supply) as well as how to display other detailed switch information (such as firmware the contents of the table. • Click Search to search for a specific text string in the table. Type the text string in the box that Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 211
selected switch appears in the Switch View. The background color of the Fan button indicates the overall status of the fan. 2. Click the Fan button on the Switch View. The detailed fan status for the switch is displayed, as shown in Figure 12-3. Web Tools Administrator's Guide Publication Number - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 212
switch from the Fabric Toolbar. The selected switch appears in the Switch on the Switch View. The detailed temperature sensor states for the switch are more information regarding switch power modules, refer to Select a switch from the Fabric Tree. The selected switch appears in the Switch View. - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 213
Switch The Status button displays the operational state of the switch. The background color of the button displays the real-time status of the switch If no data is available from a switch, the most recent background color remains If the switch status is marginal or critical, information on the - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 214
Monitoring (SAM). Note The Port Detail Report and Switch Availability Monitor (SAM) reports display the details of only those ports which are members of the current Admin Domain context and the E_Ports of the switch. 12-8 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 215
the report • View the data in raw XML format • View the style sheet for the report • View the XML schema for the report Figure 12-7 Switch Report Action Menu Web Tools Administrator's Guide Publication Number: 53-0000194-01 12-9 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 216
SilkWorm 24000 The blinking LEDs indicate port status and port speed. Figure 12-8 Port and LED Status Color-Coded Information in the Port Icon in Switch View 12-10 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 217
port 4. Port Status LED for the left port Figure 12-9 Port LEDs for the FC4-32 Port Blade in the SilkWorm 48000 Web Tools Administrator's Guide Publication Number: 53-0000194-01 12-11 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 218
12 12-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 219
can automatically alert you when problems arise, before they become costly failures. Note The Fabric Watch module is read-only if you do not own the switch. Owning ports on a switch is not enough to enable Fabric Watch on that switch. Fabric Watch tracks a number of SAN fabric elements, events, and - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 220
Click the Watch button in the Switch View to access the Fabric Watch module, shown in Figure 13-1. Note Unless the switch is a member of the Fabric Watch navigation tree, lists the available classes for the switch Summary of actions Figure 13-1 Fabric Watch Module The last time the - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 221
. The classes are organized in a set of folders. Not all classes are available for all switches. You should use the Fabric Watch module if you want to: • Configure custom threshold values used in event-setting comparisons Web Tools Administrator's Guide Publication Number: 53-0000194-01 13-3 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 222
If you select the FRU class from the Fabric Watch navigation tree, there is a separate set of instructions. See "Configuring Alarms for FRUs" on page 13-7. 5. Select an area from the Area Selection in the System Default column. 13-4 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 223
notification method for each event type (Changed, Below, Above, Inbetween). The available alarm actions are ERROR_LOG, SNMP_TRAP, RAPI_TRAP, and EMAIL_ALERT. 8. Click Apply. Web Tools Administrator's Guide Publication Number: 53-0000194-01 13-5 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 224
Individual Elements Use the Element Configuration subtab to configure element-specific alarm settings. To enable or disable threshold alarms for an Watch for that switch; not all alarm options are available for all switches. For more information, see the Fabric Watch Administrator's Guide. 3. Click - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 225
if you want to apply the changes to the switch. 8. Click OK in the confirmation dialog box to save the changes to the switch. Displaying Fabric Watch Alarm Information From the Fabric for Individual Elements" on page 13-6). Web Tools Administrator's Guide Publication Number: 53-0000194-01 13-7 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 226
column refers to either a fan or a fan FRU, depending on the switch model. See "Displaying Detailed Fan Hardware Status" on page 12-5 for more area display. For troubleshooting responses to alarms, see the Fabric Watch Administrator's Guide. 13-8 Web Tools Administrator's Guide Publication Number: - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 227
for the SilkWorm 24000 and 48000 directors, it is on a logical-switch basis. This means that for each logical switch, you must set up the email notification recipient's DNS server and method is assigned to monitored areas. Web Tools Administrator's Guide Publication Number: 53-0000194-01 13-9 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 228
working correctly. You can send a test email only after you have applied your settings. . Figure 13-3 Fabric Watch Email Configuration 13-10 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 229
operate at a reduced bandwidth instead of being disabled for lack of buffers. Buffer-limited operation is supported for the L0 and LD extended ISL modes only and is persistent across reboots, switch disabling and enabling, and port disabling and enabling. • Port Speed-The port speed is displayed as - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 230
-Table 14-1 describes the long-distance settings and identifies which settings require a Brocade Extended Fabrics license. Figure 14-1 Extended Fabric Tab 14-2 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 231
The maximum supported link No specific: For SilkWorm 24000 and 48000 directors, click the slot subtab that corresponds to the correct slot for the logical switch. For SilkWorm 200E, 3250, 3850, 3900, 4100, 4900, and 7500 switches, proceed directly to the next step. Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 232
, the port operates in bufferlimited mode. c. Press Enter or click another port entry for the value to be accepted. 5. Click Apply. 14-4 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 233
and utilize storage in a Fibre Channel SAN. • "Supported Platforms for iSCSI," next • "About the iSCSI Service" on page 15-1 • "Setting Up iSCSI Target Gateway Services" on page 15-5 Supported Platforms for iSCSI The iSCSI target gateway service is supported only on the SilkWorm 48000 director with - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 234
through ge7. The FC4-16IP blade does not support FCIP functionality. The iSCSI standard defines several naming to print out the contents of a table to a local printer. • Click Search to search for a specific text string in the table. Type a text string in the Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 235
target gateway is implemented. Table 15-1 iSCSI Gateway Services Terminology Term Definition iSCSI Internet-SCSI. A transport initiators in an IP SAN to access and utilize storage in a Fibre Channel SAN. the FC416IP embedded switch in a SilkWorm 48000 Guide Publication Number: 53-0000194-01 15-3 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 236
15 Table 15-1 iSCSI Gateway Services Terminology (Continued) Term Definition iSCSI session An iSCSI session for an IP connection to an RJ-45 copper connector. FC4-16IP has 8 ports of this type that support 1 Gbps speed. PDU Protocol Data Unit. A unit of data with a header and an optional data - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 237
will be transfered from the Web Tools database to the switches database and distributed throughout the fabric. • Abort-Click Gateway Services The following procedure provides an overview of the basic steps for setting up iSCSI target gateway services. Guide Publication Number: 53-0000194-01 15-5 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 238
Target Gateway Admin Module The iSCSI button in the Switch View launches the iSCSI Target Gateway Admin module. Gateway Admin module 1. Select a switch from the Fabric Tree. 2. Log in to the switch (see "Logging In" on page 1-13.) The selected switch appears in the Switch View. Make sure that your - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 239
on the Switch View. The iSCSI target gateway services module is displayed. Note If the iSCSI target gateway services is disabled, been activated. When you click the iSCSI button from Switch View to launch the iSCSI Target Gateway Admin module switch in the left pane, the right pane lists the - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 240
GbE port that will be used. 4. Select the IP Interface tab and click Add. 5. Enter the IP address and subnet mask. 15-8 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 241
port that will be used. 4. Select the IP Interface tab. 5. Click Edit. The following dialog box displays. Figure 15-5 Warning Dialog Box Web Tools Administrator's Guide Publication Number: 53-0000194-01 15-9 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 242
. To edit the IP route 1. Launch the iSCSI Target Gateway Admin module as described on page 15-6. 2. Select the iSCSI Port tab. Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 243
the iSCSI Target Gateway Admin module as described on page 15-6. 2. Select the Targets tab. 3. Click Create. The VT Configuration wizard displays. Web Tools Administrator's Guide Publication Number: 53-0000194-01 15-11 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 244
actual LUN. 7. Click Add LUN(s). This will add the selected LUNs to your virtual target. 8. Click Next and click Finish. 15-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 245
Select the Targets tab 3. Click Easy Create. Figure 15-10 Easy Create Wizard 4. Follow the instructions in the wizard to create a virtual target in iSCSI. The wizard is self-explanatory, so where you want to edit the targets. Web Tools Administrator's Guide Publication Number: 53-0000194-01 15-13 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 246
instructions in the wizard to edit an iSCSI virtual target. The wizard is self-explanatory, so the individual steps are not described in this document. Note The Remove LUN(s) button is available only for virtual targets that have not been fully initialized as a target. To search for a specific switch - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 247
list will have current members of the DD being viewed. Discovery domains can be created with virtual targets, iSCSI initiators, or both. Web Tools Administrator's Guide Publication Number: 53-0000194-01 15-15 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 248
15-6. 2. Select the Discovery Domains tab. 3. Click Create DD. The Create DD wizard is launched. Figure 15-13 Create DD Wizard 4. Follow the instructions in the wizard to create an iSCSI discovery domain. The wizard is self-explanatory, so the individual steps are not described in this document - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 249
one discovery domain associated in it. Only floating discovery domains are allowed. Note You cannot rename a discovery domain or discovery domain set. Web Tools Administrator's Guide Publication Number: 53-0000194-01 15-17 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 250
Create DDSet wizard is launched. Figure 15-14 Discovery Domain Set Creation Wizard 4. Follow the instructions in the wizard to create an iSCSI Discovery Domain Set The wizard is self-explanatory, so the changes that you made. 15-18 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 251
. 4. Enter the CHAP user name. Optional: To add more than one user at a time, click Add. 5. Enter a CHAP secret and click Apply. Web Tools Administrator's Guide Publication Number: 53-0000194-01 15-19 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 252
or no zoning implemented, you do not need to create one for iSCSI target gateway service. The following default zoning conditions apply: • If default zoning is set to No already talk to each other. However, to avoid SAN congestion in the future, you should implement a zoning plan for your devices - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 253
be placed into a defined configuration or automatically enabled. 4. Add the ISCSI FC ZONE into a configuration. See "Creating Zone Configurations" on page 9-21. Web Tools Administrator's Guide Publication Number: 53-0000194-01 15-21 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 254
the effective configuration and then the configuration will be re-enabled. This affects the entire SAN; the zoning database needs to update itself and then replicate its changes into the fabric is modified and reenabled. 15-22 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 255
15 Managing and Troubleshooting Accessibility The Web Tool iSCSI accessibility feature helps you: • Verify that both host and target are online. an iSCSI Fibre Channel zone with an effective zone configuration" on page 15-22. Web Tools Administrator's Guide Publication Number: 53-0000194-01 15-23 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 256
15 15-24 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 257
16-4 About Routing For Fabric OS 5.2.0, the supported routing policies are: • Port-based routing Port-based conditions. See the Fabric OS Administrator's Guide for more information. To optimize port and link cost. The Routing tab of the Switch Admin module displays routing information. Figure 16-1 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 258
type specific: For SilkWorm 24000 or 48000 directors, click a slot number under the FSPF Route category in the navigation tree. For SilkWorm 200E, 3250, 3850, 3900, 4100, 4900, and 7500 switches, click the FSPF Route category in the navigation tree. 16-2 Web Tools Administrator's Guide Publication - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 259
However, if the fabric contains destination devices that do not support out-of-order delivery, you can force in-order frame Guide. When you enable or disable IOD for a SilkWorm 24000 that is configured for two logical switches, it is on a logical-switch basis. This means that for each logical switch - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 260
the Switch Admin module as described on page 3-3. 2. Click the Routing tab. 3. This step is switch-specific: For SilkWorm 24000 and 48000 directors, click the slot number of the logical switch under that port. 6. Click Apply. 16-4 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 261
Service" on page 17-15 Creating and Maintaining User-Defined Accounts In addition to the default accounts-root, factory, admin, and user-Fabric OS supports up to 256 userdefined accounts in each logical switch defined accounts Web Tools Administrator's Guide Publication Number: 53-0000194-01 17-1 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 262
can perform these operations only on the primary FCS switch. For legacy users with no Admin Domain specified, will not be allowed to log in to any switch in the fabric. If no Home Domain is tab displays and changes information in the switch database. If you have RADIUS configured, note - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 263
17 Figure 17-1 User Tab To display account information 1. Launch the Switch Admin module as described on page 3-3. 2. Click the User tab. A list of the default and user-defined accounts displays. If you are logged in using - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 264
how to create and delete user-defined accounts. To create a user-defined account 1. Launch the Switch Admin module as described on page 3-3. 2. Click the User tab. 3. Click the Add button button to enable or disable the account. 17-4 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 265
displayed. If all the Admin Domains in the list are inactive then you can't login to the switch. The All option does not mean all of the listed Admin Domains; it means all Admin Domains . All other buttons are grayed out. Web Tools Administrator's Guide Publication Number: 53-0000194-01 17-5 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 266
displayed. If all the Admin Domains in the list are inactive then you can't login to the switch. The All option does not mean all of the listed Admin Domains; it means all Admin Domains and click Apply to apply your changes. 17-6 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 267
in, Web Tools requires the user to provide a new password. Note You have to own the switch in order to modify password rules. A password becomes locked if a user has exceeded the maximum number Click Apply to save your changes. Web Tools Administrator's Guide Publication Number: 53-0000194-01 17-7 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 268
17 To set the rules for passwords 1. Launch the Switch Admin module as described on page 3-3. 2. Click the User tab. 3. Click the Set Password Click Apply to save your changes. Figure 17-3 Configure Password Rules Dialog Box 17-8 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 269
save your changes. Configuring Access Control List Policies Support for the Access Control List (ACL) policies is currently defined in the Switch Connection Control (SCC) and Device Connection Control view of the fabric. Web Tools Administrator's Guide Publication Number: 53-0000194-01 17-9 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 270
add to an DCC policy by clicking Add or Add All. 9. Click Finish to confirm the changes to the switch. You must activate the policy in order to implement it. See "To activate an SCC or DCC policy" on page 17-11, for instructions. Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 271
the policy type you want to edit. 6. Click Next and click Modify. 7. Select a switch or highlight multiple switches to add to the policy by clicking Add or Add All. 8. Click Next and click Finish to the rest of the fabric: Web Tools Administrator's Guide Publication Number: 53-0000194-01 17-11 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 272
switches • Tolerant means that the policy will allow legacy switches • Strict means that only Fabric OS version 5.2.0 switches and if some of the fabric switches don't accept the distribution, then switch. Configuring SNMP This section describes how to manage the do not own the switch. For more information, - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 273
with two logical switches, it is on a logical-switch basis. This means that for each logical switch, you must set trap levels individually. To set trap levels 1. Launch the Switch Admin module as prompt a trap. 4. Click Apply. Web Tools Administrator's Guide Publication Number: 53-0000194-01 17-13 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 274
section and type a new IP address. 5. Click Apply. To set SNMPv3 configuration parameters 1. Launch the Switch Admin module as described on page 3-3. 2. Click the SNMP tab (see Figure 17-5). 3. Select a . 5. Click Apply. 17-14 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 275
, you can have no secondary AAA service, which means that only the primary service will be used for authentication. Use the AAA Service tab of the Switch Admin module to manage the RADIUS service (see Figure 17-6). Web Tools Administrator's Guide Publication Number: 53-0000194-01 17-15 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 276
Timeout from the Secondary AAA Service drop-down menu. To disable RADIUS service, select Switch Database from the Primary AAA Service drop-down menu and select None from the Secondary AAA Service drop-down menu. 4. Click Apply. 17-16 Web Tools Administrator's Guide Publication Number: 53-0000194 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 277
switches in a configuration download. You should configure at least two RADIUS servers so that if one fails, the other will assume service. You can configure the RADIUS service return to the AAA Service tab and click Apply. Web Tools Administrator's Guide Publication Number: 53-0000194-01 17-17 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 278
the Switch Admin module as described on page 3-3. 2. Click the AAA Service tab. Services tab. 5. Click Apply in the AAA Services tab. A confirmation displays, warning you that you are about to remove the selected RADIUS server. 6. Click Yes in the confirmation 17-18 Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 279
OS. A Brocade switch or director that supports CUP (SilkWorm 3900 , 24000, or 48000) can be controlled by one or more host-based management programs or director consoles, such as Brocade Web Tools or Brocade Fabric Manager. (Refer to the Fabric Manager Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 280
port and destination only. This also includes user-configured paths. All SilkWorm 4100 and 48000 switches with FICON devices attached must have port-based routing policy enabled. Port-based routing is Apply to save your changes. 18-2 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 281
FMS Mode FICON Management Server (FMS) is used to support switch management using CUP. To be able to use the CUP functionality, all switches in the fabric must have FICON Management Server mode (FMS mode) enabled. FMS mode is a per-switch setting. After FMS mode is enabled, you can activate - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 282
or alternate managers are saved in this IPL file. It keeps the current active configuration persistent across switch reboots and power cycles. You cannot directly modify the IPL file or save a file as an be reset by Web Tools. 18-4 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 283
is enabled, the director console (Web Tools, in this case) displays warning indications when the switch timestamp is changed by a user application. When it is disabled, you can activate a function to Tools, as it is read-only. Web Tools Administrator's Guide Publication Number: 53-0000194-01 18-5 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 284
FICON-enabled switch from the Fabric Tree. 2. Launch the Switch Admin neutral or a switched state. When it device is switched, it . It might cause the switch to be unmanageable with CUP stuck. The Web Tools Switch Admin displays the control recent update. You can manually reset allegiance to bring - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 285
Switch enable/disable • Switch name change To display the control device state 1. Click a FICON-enabled switch from the Fabric Tree. 2. Launch the Switch displayed as neutral or switched in the Control on switch." on the switch. You from the switch. When switch allows in the switch. This attribute - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 286
-9. To display the CUP Port Connectivity Configurations list 1. Click a FICON-enabled switch from the Fabric Tree. 2. Launch the Switch Admin module as described on page 3-3. 3. Click the FICON CUP tab. FMS mode is enabled. 18-8 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 287
18 4. Click the CUP Port Connectivity subtab (see Figure 18-3). Figure 18-3 Configuring CUP Port Connectivity Web Tools Administrator's Guide Publication Number: 53-0000194-01 18-9 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 288
box displays all ports and port names on the selected switch (similar to the dialog box shown in Figure 18-4). displays the content of the selected configuration from the switch in a table format (see Figure 18-4). 3. from the switch. • Click Cancel to cancel all changes without saving. 18 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 289
Configuration When you activate a saved CUP port connectivity configuration on the switch, the preceding configuration (currently activated) is overwritten. To activate a 2. Click the saved configuration from the list. Web Tools Administrator's Guide Publication Number: 53-0000194-01 18-11 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 290
Port Connectivity Configuration confirmation dialog box displays. 4. Click Yes to delete the selected configuration; click No to cancel the deletion. 18-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 291
-Specific Limitations switch platforms. Table 19-1 Web Tools Limitations Area Details Browser The Fabric Watch, Switch switch Web server (either by normal HA failover, reboot, or other causes). Workaround: If the Fabric Watch, Switch Switch Admin, Name Server, and Topology modules from Switch - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 292
downloaded firmware , and 7500 switches: loss of switch or to send a request to the switch: Failed to get switch switch, but the connection was down, probably caused by a temporary loss of the Web server on the switch switch, resubmit it. Executing a refresh from Web Tools retrieves a copy of switch - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 293
to resubmit your request after closing this message. If the temporary switch connection loss is caused by switch hot code load, or other similar operation, the Switch Explorer you are currently running can be downloaded from a different firmware version than the new one. In this case the following - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 294
use the CLI to manually delete these counters. switch name or domain ID will not be updated on the header of the Switch Admin page. Clicking the Refresh button will not fix the problem. Workaround: Click the Switch tab and the Switch Admin header will update. 19-4 Web Tools Administrator's Guide - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 295
must manually close these windows. Switch View Occasionally, switches might display switch" message on the Switch View, even though the Ethernet connection has been lost. You might still be able to invoke various features from Switch View, such as Status, Fan Temp, Power, and Beacon. This problem - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 296
Plug-in might sometimes have problems focusing on a particular field in an open applet if you have the same window open for both logical switches. Workaround: When this problem occurs, close and relaunch the affected applet. 19-6 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 297
, some pop-up windows (for example, the firmware download completion message and performance monitor dialog boxes) display tab in the Switch Admin module; then click the Routing tab again. Telnet Mozilla browsers do not support the telnet application 's Guide Publication Number: 53-0000194-01 19-7 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 298
19 19-8 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 299
. See ACL access control. See RBAC. accessing Switch Admin module 3-3, 11-5 switch event report 3-22 telnet window 3-3 activating CUP 5-2 modifying 8-11 Web Tools Administrator's Guide Publication Number: 53-0000194-01 module, frequency, setting 1-3 supported 1-2 buffer-limited ports 14-1 Index-1 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 300
ID 3-8 passwords 17-7 switch name 3-7 CHAP authentication backing up 4-2, 4-3 downloading 4-3 restoring 4-3 saving services 3-13 threshold alarms, Fabric Watch 13-5 virtual channel settings 3-12 Configuring an IKE or IPSEC Policy 7-7 contacting technical support Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 301
Server mode 18-3 ports 5-9, 5-10 RADIUS service 17-16 RLS probing 3-13 switch 3-7 telnet access 2-16 trunking mode 6-3 zone switch events 3-22 switch information 3-7, 3-8 temperature status 12-6 user account information 17-3 DLS 16-3 domain ID, changing 3-8 downloading configuration file 4-3 firmware - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 302
-3 supported switches 11 service, about 7-1 tunnels, configuring 5-7, 7-15 FCR router cost 11-8 feature licenses 3-14 Fibre Channel Association xxii FICON Management Server mode, enabling and disabling 18-3 parameters 18-4 filtering events 3-23 firmware download Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 303
iSCSI Target Gateway about 15-1 activating the service 15-7 CHAP authentication 15-4 CHAP secrets, editing DD), 15-15 Web Tools Administrator's Guide Publication Number: 53-0000194-01 discovery managing/troubleshooting accessibility 15-23 PDU 15-4 search for FC target 15-14 supported switches 15-1 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 304
per-frame routing priority 3-10 persistently disable a port 5-10 physically locating switch using beaconing 3-28 PID format 3-10 platforms, supported 1-2 platform-specific limitations 19-6 polling rates 2-13 Port Management module 5-1 Web Tools Administrator's Guide Publication Number: 53-0000194-01 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 305
17-16 modifying 17-17 modifying server order 17-18 removing 17-18 RAM requirements 1-2 RBAC pre-defined roles 1-12 rebooting the switch 3-9 Web Tools Administrator's Guide Publication Number: 53-0000194-01 recommendations configuration tasks 2-16 for Web Tools 2-16 for zoning 9-35 mixed fabric 2-16 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 306
2-12 switch information, displaying 3-7, 3-8 switch name, changing 3-7 Index-8 switch PID format 3-10 switch report 3-8 switch status report 12-8 Switch View 2-10 Switch View button menu 2-11 syslog IP address configuring 3-5 removing 3-5 system services, configuring 3-13 T technical support xxii - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 307
LSAN fabrics 11-5 LSAN zones 11-9 swapped ports 5-13 Switch Explorer 2-1 switch report 3-8 switch status 12-7 switches in the fabric 2-14 trunk groups 6-2 Viewing and , disabling 9-24 zoning, saving changes 8-7, 9-7 Web Tools Administrator's Guide Publication Number: 53-0000194-01 Index-9 - HP StorageWorks 2/16 | Brocade Web Tools Administrator's Guide (53-0000194-01, N - Page 308
Index-10 Web Tools Administrator's Guide Publication Number: 53-0000194-01
Publlication Number: Publication Number: 53-0000194-01
Publlication Date: Publication Date:
09/29/06
Web Tools
Administrator’s Guide
Supporting Fabric OS v5.2.0