HP StorageWorks 2/16 SAN Switch 2/16 version 3.1.x - Installation Guide
HP StorageWorks 2/16 - SAN Switch Manual
View all HP StorageWorks 2/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 2/16 manual content summary:
- HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 1
installation guide hp StorageWorks SAN switch 2/16 version 3.1.x Product Version: 3.1.x Third Edition (June 2003) Part Number: AA-RR84C-TE This installation guide provides basic procedures for setting up, configuring, and managing the SAN Switch 2/16 and SAN Switch 2/16 power pak models. - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 2
® is a registered trademark of The Open Group. BROCADE, the Brocade B weave logo, Brocade: the Intelligent Platform for Networking Storage, SilkWorm, and an additional warranty. Printed in the U.S.A. SAN Switch 2/16 Version 3.1.x Installation Guide Third Edition (June 2003) Part Number: AA-RR84C- - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 3
Conventions 11 Text Symbols 11 Equipment Symbols 12 Rack Stability 14 Getting Help 15 HP Technical Support 15 HP Storage Website 15 HP Authorized Reseller 16 1 Overview 17 SAN Switch 2/16 Features 18 Firmware 18 Hardware 19 SFP Media Side 20 Optical Ports 20 ISL Trunking 21 SFPs - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 4
Current Core PID Format 63 How to Change the Core PID Format 64 Modifying Domain IDs 65 Specifying Custom Status Policies 66 Connecting the Switch to the Fabric 66 Verifying Operation 67 Installing Multiple Switches into an Existing SAN 68 4 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 5
Switch 79 Changing the Admin Password and User ID 80 Configuring the IP and Fibre Channel Address 81 Displaying Devices within the Fabric 82 Checking the Firmware Version 82 Setting the Switch Date and Time 82 Displaying Switch (Japan 93 SAN Switch 2/16 Version 3.1.x Installation Guide 5 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 6
rack 50 17 Assembling the outer rails (HP 9000 Series or comparable EIA rack 51 18 Assembling the outer rails (HP System/e rack 52 19 Assembling the inner rails 53 20 Installing the switch into a rack (HP 9000 Series or comparable EIA rack 54 6 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 7
switch into a rack (HP System/e rack 55 22 Connecting the power cords 56 23 Connecting the Serial cable 59 24 Connecting the Ethernet cable 62 25 Inserting a cable into an SFP 67 Tables 1 Document Conventions 11 2 SAN Switch 2/16 is Used 103 SAN Switch 2/16 Version 3.1.x Installation Guide 7 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 8
Contents 8 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 9
this guide This installation guAidbe porouvitdetshinisforGmautioindtoehelp you set up and configure the HP StorageWorks SAN Switch 2/16. About this Guide About this Guide topics include: ■ Overview, page 10 ■ Conventions, page 11 ■ Rack Stability, page 14 ■ Getting Help, page 15 SAN Switch 2/16 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 10
2000®, Windows NT®, and IBM AIX ■ Web Tools Graphical User Interface (GUI), for configuring the switch via a supported Web browser Related Documentation For a list of related documents included with this product, see the Related Documents section of the HP StorageWorks SAN Switch 2/16 Version - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 11
text emphasis User input, hp.com Text Symbols The following symbols may be found in the text of this guide. They have the following meanings. WARNING: Text set off in this manner indicates that failure to follow directions in the warning could result in bodily harm or death. SAN Switch 2/16 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 12
these symbols indicates the presence of electrical shock hazards. Enclosed area contains no operator serviceable parts. WARNING: To reduce the risk of personal injury from electrical shock hazards , allow the surface to cool before touching. 12 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 13
About this Guide Power supplies or systems marked with these symbols indicate the presence of multiple sources of or damage to the equipment, observe local occupational health and safety requirements and guidelines for manually handling material. SAN Switch 2/16 Version 3.1.x Installation Guide 13 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 14
About this Guide Rack Stability Rack stability protects personnel and equipment. WARNING: To reduce the risk of personal injury or damage to the at any time. A rack may become unstable if more than one rack component is extended for any reason. 14 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 15
, specific questions HP Storage Website The HP website has the latest information on this product. Access storage at: http://thenew.hp.com/country/us/eng/prodserv/storage.html. From this website, select the appropriate product or solution. SAN Switch 2/16 Version 3.1.x Installation Guide 15 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 16
About this Guide HP Authorized Reseller For the name of your nearest HP authorized reseller: ■ In the United States, call 1-800-345-1518. ■ In Canada, call 1-800-263-5868. ■ Elsewhere, see the HP website for locations and telephone numbers: http://www.hp.com 16 SAN Switch 2/16 Version 3.1.x - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 17
HP StorageWorks SAN Switch 2/16 is offered in two configurations; the 2/16 and 2/16 power pak. Refer to the HP StorageWorks SAN Switch 2/16 Version 3.1.x Release Notes for a complete list of management features enabled on your specific switch. Note: This guide refers to both models as the SAN Switch - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 18
groups within a fabric. For more information refer to the HP StorageWorks Zoning Version 3.1.x/4.1.x User Guide. ■ Per port statistics to help technicians diagnose and isolate problem ports without disrupting switch operations. ■ Error detection and fault isolation, automatically disables failing - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 19
chassis, and an embedded processor that processes frames up to 1,024 bytes. ■ A real-time clock (RTC) with a 10-year battery and 56 bytes of NVRAM. SAN Switch 2/16 Version 3.1.x Installation Guide 19 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 20
SAN Switch 2/16 to link or cascade to other HP StorageWorks Fibre Channel switches running v2.6x and above, building a highly scalable SAN fabric. The Fibre Channel SAN Switch 2/16 supports , FC-PI specification for Fibre Channel SFP transceivers. 20 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 21
the combined bandwidth of up to four ISLs between two directly adjacent switches, while preserving in-order delivery. For specific information about ISL trunking, refer to the HP StorageWorks Trunking Version 3.1.x/4.1.x User Guide. SFPs The ports connect to SFP media. SFPs are universal and self - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 22
Hardware Kits HP provides the following optional hardware kits in support of the SAN Switch 2/16, see Table 2. Table 2: SAN Switch 2/16 Orderable Hardware 221691-B27** C7534A* C7534A* * premerger HP part number ** premerger Compaq part number 22 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 23
as a Stand-alone Unit, page 30 ■ Installing the SAN Switch 2/16 in an HP 9000 Series or Comparable EIA Rack, page 31 ■ Installing the Switch in the Optional HP System/e Rack, page 40 ■ Installing the Switch Using the HP StorageWorks SAN Switch Universal Rack Mount Kit, page 46 ■ Connecting AC Power - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 24
Unpack the shipping cartons. Note: The Rack Mount Kit shown in Figure 3 and Table 3 may not represent the kit that shipped with your switch. HP reserves the right to substitute Rack Mount Kits, providing applicable instructions with each switch. 24 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 25
Installing the SAN Switch 2/16 2 3 1 5 4 6 Figure 3: Carton contents SHR-2489A SAN Switch 2/16 Version 3.1.x Installation Guide 25 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 26
the adapter on the end of the cable) HP StorageWorks SAN Switch 2/16 *Rack Mount Kit containing: Slide Assembly, includes 3-hole Bar Nuts (4) • 10-32 x 3/8-inch Phillips pan-head screws (10) • 8-32 x 3/16-inch Phillips pan-head screws (10) switch. 26 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 27
As a fixed component using the optional HP StorageWorks SAN Switch Universal Rack Mount Kit. For instructions, see Installing the Switch Using the HP StorageWorks SAN Switch Universal Rack Mount Kit on page page 46. Note: Depending on time of purchase, the SAN Switch 2/16 ships with one of the rack - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 28
HP cautions that you must install the switch switch has a universal power supply capable of functioning worldwide without voltage jumpers or switches. The power supply is auto ranging in terms of accommodating input voltages and line frequencies. 28 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 29
Installing the SAN Switch 2/16 Electrostatic Discharge Precautions To prevent electrostatic damage, observe the following precautions: ■ Avoid ■ Always make sure you are properly grounded when touching a static-sensitive component or assembly. SAN Switch 2/16 Version 3.1.x Installation Guide 29 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 30
steps 3 through 5 for the remaining power supply. Note: Do not connect the switch to the network until the IP address is correctly set. For instructions on how to set the IP address, see "Configuring Network Addressing" later in this chapter. 30 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 31
Installing the SAN Switch 2/16 Installing the SAN Switch 2/16 in an HP 9000 Series or Comparable EIA Rack Read the following sections to install the switch in a rack using the Rack Mount Kit supplied with the switch. Obtain the following tools: ■ A #2 Phillips screwdriver ■ Torque screwdriver - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 32
same direction. a. HP recommended method: To allow the port side of the switch to slide out the switch. 2. Locate three Phillips head, 8-32 x 3/16-inch screws provided in the Rack Mount Kit. Secure the inner slide rail to the switch, see Figure 4. 32 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 33
the port side of the switch slides out the back of the HP 9000 Series rack. (For example, the switch should face the aisle where exhaust air is released. Air intake and exhaust for all components in the rack should flow in the same direction.) SAN Switch 2/16 Version 3.1.x Installation Guide 33 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 34
switch, see Figure 5. Figure 5: Attaching the rear rack mount brackets SHR-2490A 3. Tighten the screws and torque to 15-inch pounds. 4. Repeat steps 1 through 3 to install the left mount bracket on the left side of the switch, see Figure 5. 34 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 35
rails in the HP 9000 Series Rack. Obtain the following items, located in the Rack Mount Kit: ■ Four 3-hole bar nuts ■ Eight Phillips head 8-32 x 3/8-inch screws ■ Eight square alignment washers ■ # 2 Phillips screwdriver with torque capability SAN Switch 2/16 Version 3.1.x Installation Guide 35 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 36
the HP 9000 Series Rack. 1. Determine the appropriate placement for the switch inside the HP 9000 Series or EIA Rack. Note: The HP 9000 SAN Switch 2/16 requires one Unit of rack space. 3. Insert one square alignment washer on each of the eight 10-32 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 37
required. Delete this set of instructions 1 5 1 Phillips head 10-32 x 3/8-inch screw 2 3-hole bar nut 3 Outer slide rail SHR-2478A 4 L-Brackets 5 Power cord clip (1 of 6) Figure 6: Attaching the outer slide rails to the HP 9000 Series rack SAN Switch 2/16 Version 3.1.x Installation Guide 37 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 38
outer slide rails all the way toward the front or back of the rack. 2. Carefully lift the switch into the rear of the rack, inserting the inner slide rails (attached to the switch) into the outer slide rails (attached to the rack), see Figure 7. 38 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 39
rack mount bracket to the rack rails. 3. Tighten the screws, and torque to 25-inch pounds. 4. See the "Connecting AC Power" on page 56 for instructions on applying power to the switch. SAN Switch 2/16 Version 3.1.x Installation Guide 39 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 40
Installing the SAN Switch 2/16 Installing the Switch in the Optional HP System/e Rack This section provides instructions for installing the switch in the HP System/e rack. Items Required for the HP System/e Rack The HP System/e Rack Kit consists of the following items: ■ HP System/e Rack Rail Kit, - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 41
hardware is available. 2. Choose a mounting location in the rack for the switch. 3. Install each of the two mounting brackets with one M5 Torx head screw with captive lock washers as shown in Figure 8. Figure 8: Installing the mounting brackets SAN Switch 2/16 Version 3.1.x Installation Guide 41 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 42
Installing the SAN Switch 2/16 4. Install two M5 U-type Tinnerman clips for each of the front columns of the rack in the top and bottom portion of the outer rail flush against the rear rail-tray brackets. Install them as shown in Figure 10. 42 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 43
illustration as required. [8] Adjust the size of the outer graphic frame as required. Delete this set of instructions 1 2 1 Rubber washer (1 of 2) 2 Rear rail tray bracket (1 of 2) Figure 10: upper left and the lower right screws until later. SAN Switch 2/16 Version 3.1.x Installation Guide 43 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 44
Figure 11: Assembling the outer rails (HP rack) 7. Assemble the two inner rails (one on each side) to the switch using (6) #8-32 x 5/16 Phillips pan-head screws, and #8 flat washer as shown in Figure 12. Figure 12: Assembling the inner rails 44 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 45
the two remaining M5 Torx screws to complete the installation. See Figure 13. Figure 13: Installing switch into the HP rack SHR-2583 10. See the next section, "Connecting AC Power" on page 56, for instructions on applying power to the switch. SAN Switch 2/16 Version 3.1.x Installation Guide 45 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 46
the SAN Switch 2/16 Installing the Switch Using the HP StorageWorks SAN Switch Universal Rack Mount Kit This section provides instructions for installing the SAN Switch 2/16 in an HP rack using the Universal Rack Mount Kit, part number 331148-B21. The following items are required: ■ SAN Switch 2/16 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 47
prevents switch overheating, which may cause it to fail. To install the switch in a rack: 1. Check contents of the shipping carton to verify all the required parts and hardware are available. 2. Choose a mounting location in the rack for the switch. SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 48
of the two brackets with (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and (2) #10 adapter washers as shown in Figure 14. Figure 14: Installing the rear mounting brackets (HP 9000 Series or comparable EIA rack) 48 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 49
rack, install each of the two rear mounting brackets with (2) #10-32 x 1/2-inch Phillips pan-head screws and (2) #10 alignment washers as shown in Figure 15. Figure 15: Installing the rear mounting brackets (HP System/e rack-left rear upright) SAN Switch 2/16 Version 3.1.x Installation Guide 49 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 50
using (2) 1/4-20 hex nuts with captive star lock washers attached loosely as shown in Figure 16. Don't tighten them. The nuts will be tightened later in step 8. Figure 16: Installing the outer rails (HP 9000 Series or comparable EIA rack) 50 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 51
10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the left rail. See Figure 17. Figure 17: Assembling the outer rails (HP 9000 Series or comparable EIA rack) SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 52
install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 alignment washers in the upper and lower hole locations of the left rail. See Figure 18. Figure 18: Assembling the outer rails (HP System/e rack) 52 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 53
lengths can cause damage to internal components The inner rails work for all three SAN switches-SAN Switch 2/32, SAN Switch 2/16, and SAN Switch 2/8. The mounting holes in the inner rails are marked with 32, 16, and 8. Use the appropriately labeled mounting holes when installing the inner rails on - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 54
EIA rack. 7. Install (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers with one on each side. See Figure 20 and Figure 21. Figure 20: Installing the switch into a rack (HP 9000 Series or comparable EIA rack) 54 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 55
a rack (HP System/e rack) 8. Tighten the nuts installed in step a of step 4 on page 50. Note: To uninstall a switch, remove the middle #10-32 x 1/2-inch Phillips pan head screw with captive star lock washer from either side of the rack uprights. SAN Switch 2/16 Version 3.1.x Installation Guide 55 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 56
rails. However, the tabs on the clips can be on either side of the rail, provided all the tabs are on the same side. 56 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 57
state, (and this is not due to the switch being set to beacon), see "Interpreting LED Activity" on page 72 in Chapter 3. Note: For more information about beaconing, refer to the HP StorageWorks Fabric OS Version 3.1x/4.1x Procedures User Guide. SAN Switch 2/16 Version 3.1.x Installation Guide 57 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 58
Installing the SAN Switch 2/16 Checking POST Results Check the success/fail results of the diagnostic tests run during POST via LED activity, the error log, or Command Line Interface (CLI) using the errShow command. For more information about error messages, refer to the HP StorageWorks Fabric OS - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 59
the SAN Switch 2/16 Setting Network Addresses via a Serial Connection Use the following steps to verify or change the switch IP address removed to use the RJ-45 connector to create a Serial connection. 4. Verify that the switch power is on and POST is completed. See the "Power-On Self Test" section, - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 60
Installing the SAN Switch 2/16 Note: These steps show instructions specific to onto the switch (with administrative privileges). The default administrative logon is admin and the default password is password. a. Enter Enter "y" to set now. 60 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 61
only for use during the initial setting of the IP address and for service purposes. Using the Serial port during normal switch operation or for regular maintenance is not recommended. 8. Record the IP address on the label affixed to the switch. SAN Switch 2/16 Version 3.1.x Installation Guide 61 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 62
. Verify that the switch is not accessed from any other connections during the remaining steps. 4. Log on to the switch with administrative privileges by telnet. The default administrative logon is admin and the default password is password. 62 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 63
edge and the Core Switch 2/64 reside, you must verify that the edge switch (for example, SAN Switch 2/16) Core PID format matches the Core switch's PID format (always 1), before connecting to the SAN. If a switch is introduced to an existing SAN . SAN Switch 2/16 Version 3.1.x Installation Guide 63 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 64
62 for instructions on connecting Fibre Channel cables. 11. If necessary, type cfgEnable to re-establish zoning. Note: Once the switch PID format is set, it is stored in the flash memory of the switch, and it is NOT necessary to set it again during subsequent firmware upgrades. 64 SAN Switch 2/16 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 65
Installing the SAN Switch 2/16 Modifying Domain IDs Optional. Modify the domain IDs, if desired, as follows. Note: The default domain ID is 1. If the default domain ID is already in use when the switch is connected to the fabric, the domain ID for the new switch is automatically reset to a unique - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 66
Installing the SAN Switch 2/16 Specifying Custom Status Policies Optional. If switch ports as required. Note: The ports and cables used in trunking groups must meet specific requirements. For a list of these requirements, refer to the HP StorageWorks ISL Trunking Version 3.1.x/4.1.x User Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 67
to verify that the switch is running properly. 1. Access your browser. 2. At the URL address window, type http://your switch IP address. 3. If connected properly, the name of your switch appears (in green) at the prompt, indicating Healthy/OK. SAN Switch 2/16 Version 3.1.x Installation Guide 67 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 68
if required for a replacement switch. For instructions on how to back up the configuration, refer to "Backing Up System Configuration Settings" in Chapter 4. Installing Multiple Switches into an Existing SAN Use these steps to set up more than one edge switch in an existing SAN. 1. Connect the - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 69
Installing the SAN Switch 2/16 4. Set the switch Domain Address using the configure command to the next unused domain in the SAN. The default domain setting is 1. Note: If a switch boot failure occurs, the switch must be taken offline for repair or replacement. Contact your HP Technical Support for - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 70
the SAN Switch 2/16 device. Check the configuration information for your network components for specific requirements. See the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Procedures User Guide for a detailed command description. Cascading Switches The Domain ID number uniquely identifies a switch - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 71
Managing the SAN Switch 2/16 3 This chapter covers the following topics: ■ Interpreting LED Activity, page 72 ■ Management Overview, page 78 ■ Running Basic Switch Operations Using Telnet, page 79 ■ Diagnostic Tests, page 84 SAN Switch 2/16 Version 3.1.x Installation Guide 71 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 72
does not indicate a problem. Note: Any errors related to LED activity are listed in the error log. For information about the error log, refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Procedures Guide. Front Panel LEDs The front panel includes the following LEDs: ■ One Switch Power LED on - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 73
Managing the SAN Switch 2/16 Table 4: Front Panel LED Patterns During Normal Operation LED Port Status LED LED to port. No action required. No action required. No action required. No action required. Reset the switch from a management station. SAN Switch 2/16 Version 3.1.x Installation Guide 73 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 74
. The port is transmitting/receiving at 1 Gbps. The port is transmitting/receiving at 2 Gbps. Recommended Action Reset the switch from a management station. Reset the port from a management station. No action required. No action required. 74 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 75
boot has had time to complete. If there is still no light, contact the switch supplier. No action required. Errors may be listed in the error log. Refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Procedures Guide for more information. SAN Switch 2/16 Version 3.1.x Installation Guide 75 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 76
failed. Recommended Action Verify power supply is on and power cable is connected to a valid power source. No action required. Verify that the switch is on and boot had time to complete. If there is still no light, contact the switch supplier. 76 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 77
LEDs for fault indicators. Slow-flashing yellow Diagnostic failure on one or more ports. Errors may be listed in the error log. Refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Procedures Guide for more information. SAN Switch 2/16 Version 3.1.x Installation Guide 77 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 78
advantage of being virtually in front of any fabric, switch, or port. For more information refer to the HP StorageWorks Web Tools Version 3.1.x/4.1.x User Guide. Optional Management Features Refer to the HP StorageWorks SAN Switch 2/16 Version 3.1.x Release Notes for a complete list of management - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 79
sections to run common switch operations. Logging into the Switch Use these steps to log into the switch. 1. Open a telnet connection to the switch. The login prompt displays if the telnet connection successfully found the switch in the network. SAN Switch 2/16 Version 3.1.x Installation Guide 79 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 80
user without changing the password. Press Enter to leave the name as is. 4. At the Old Password prompt, enter the old password. 5. At the New Password prompt, enter the new password. The new password must be from 8 to 40 characters in length. 80 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 81
Managing the SAN Switch 2/16 6. At the New Password prompt, enter the new password exactly as entered to the previous prompt. 7. Press Enter to commit the configuration to the firmware. Configuring the IP and Fibre Channel Address The SAN Switch 2/16 is shipped with a default IP address of 10.77.77. - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 82
the SAN Switch 2/16 Displaying Devices within the Fabric To verify that you have fabric-wide connectivity when you install a new switch, display the fabric-wide device count from the newly installed switch. Use these steps to display the fabric. 1. Log in to the switch as the admin user. 2. At - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 83
Managing the SAN Switch 2/16 Note: Year values greater than 69 are interpreted as 1970-1999; year values less than 70 are interpreted as 2000-2069. The date function does not support daylight saving time or time zones. Displaying Switch Configuration Settings Use these steps to display the system - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 84
about error messages, refer to the HP StorageWorks Fabric OS Procedures Version 3.1.x/4.1.x User Guide. Diagnostic Tests Diagnostic tests are provided to help troubleshoot the hardware and the firmware. The diagnostic tests provided on the switch include tests of internal connections and circuitry - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 85
the Configuration and Upgrading Firmware 4 This chapter covers the following topics: ■ Backing Up System Configuration Settings, page 86 ■ Upgrading or Restoring the Switch Firmware, page 88 ■ Downloading Firmware from the HP Website, page 89 SAN Switch 2/16 Version 3.1.x Installation Guide 85 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 86
prompt you for each parameter, as follows: Example: switch:admin> configupload Server Name or IP Address [host]: 123.45.678.901 User Name [user]: kelev File Name [config.txt]: switch1 Protocol (RSHD or FTP) [rshd]: ftp Password: upload complete 86 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 87
location and filename of the system configuration file, and password is the password for the user ID specified. Note: The password operand is only required if you are using FTP. 5. Reboot the switch by entering the following command: fastBoot SAN Switch 2/16 Version 3.1.x Installation Guide 87 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 88
is the path location and filename of the new firmware file, and password is the password for the user ID specified. Note: The password operand is only required if you are using FTP. 4. Reboot the switch by entering the following command: fastBoot 88 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 89
and Upgrading Firmware Downloading Firmware from the HP Website To download the firmware from the HP website, go to http://www.hp.com. The website contains the required loaders and instructions for downloading the firmware to a switch. SAN Switch 2/16 Version 3.1.x Installation Guide 89 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 90
Backing Up the Configuration and Upgrading Firmware 90 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 91
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment which case the FCC could void the user's authority to operate the equipment. SAN Switch 2/16 Version 3.1.x Installation Guide 91 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 92
product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. Spécification ATI Classe A (France) DECLARATION D' 7779:1999 (Typprüfung) VCCI EMC Statement (Japan) 92 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 93
Harmonics Conformance (Japan) BSMI EMC Statement (Taiwan) Regulatory Compliance Notices RRL EMC Statement (Korea) SAN Switch 2/16 Version 3.1.x Installation Guide 93 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 94
as a Class 1 Laser product, conforming to the requirements contained in Department Of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification is indicated by a label on the metal established by the IEC and U.S. DHHS. 94 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 95
replacement or proper disposal, contact your HP authorized reseller or your authorized service provider. WARNING: Your switch contains an internal lithium manganese dioxide system or return them to HP, your authorized HP partners, or their agents. SAN Switch 2/16 Version 3.1.x Installation Guide 95 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 96
Regulatory Compliance Notices 96 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 97
removing them from their containers. ■ Avoid touching pins, leads, or circuitry. ■ Always make sure you are properly grounded when touching a static-sensitive component or assembly. SAN Switch 2/16 Version 3.1.x Installation Guide 97 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 98
conductive field service tools. ■ Use a portable field service kit with HP authorized reseller install the part. Note: For more information on static electricity, or for assistance with product installation, contact your HP authorized reseller. 98 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 99
Technical Specifications This appendix covers the following topics: ■ Dimensions, page 100 ■ Power Supply Specifications, page 101 ■ Environmental Requirements, page 102 ■ Memory Specifications, page 103 C SAN Switch 2/16 Version 3.1.x Installation Guide 99 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 100
2/16 dimensions. Table 6: Physical Specifications Height Dimension Depth Width Weight (with both power supplies) Value 1.72 +/- 0.01 inches (4.37 +/- 0.03 cm) 24.5 +/- 0.03 inches (62.2 +/- 0.1cm) 17 inches (43.2 cm) 28.0 lbs (12.7 kg) 100 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 101
power supply is universal and capable of functioning worldwide without using voltage jumpers or switches. It meets IEC 61000-4-5 surge voltage requirements. The power supply has its 300 usec - hot/cold start Fused in both hot & neutral lines . SAN Switch 2/16 Version 3.1.x Installation Guide 101 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 102
environmental ranges that are acceptable when the switch is operating, and the acceptable ranges when the switch is not operating. .Table 8: Environmental Requirements sq.wave 5G, 0-3 kHz at 1.0 octave/minute 10G, 0-5kHz at 1.0 octave/minute 102 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 103
switch utilizes the following memory. ■ Main Memory (SDRAM): 32 MB per switch ■ Flash Memory: Dual 8 MB ■ Boot Flash: 512K bytes of 8-bit for system boot The centralized memory maximizes the overall switch 2, 3, and 5 are supported; if pin 7 is SAN Switch 2/16 Version 3.1.x Installation Guide 103 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 104
Technical Specifications 104 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 105
interface with a set of services. Arbitrated Loop A shared 100 MBps or 200 MBps Fibre Channel transport structured as a loop. Can support up to 126 devices and one an arbitrating L_Port waits for a response before beginning loop initialization. SAN Switch 2/16 Version 3.1.x Installation Guide 105 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 106
is seven. See also Fabric, ISL. Chassis The metal frame in which the switch and switch components are mounted. Circuit An established communication path between two ports. Consists of two as through telnet or SNMP, and does not involve a GUI. 106 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 107
; the number of receive buffers allocated by a recipient port to an originating port. Used by Class 1 and 2 services to manage the exchange of frames across the fabric between source and destination. See also End-to-end Flow Control, BB_Credit. SAN Switch 2/16 Version 3.1.x Installation Guide 107 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 108
Protocol; mapping of protocols onto the Fibre Channel standard protocols. For example, SCSI FCP maps SCSI-3 onto Fibre Channel. Fibre Channel Transport A protocol service that supports communication between Fibre Channel service providers. 108 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 109
Channel. Set the gateway address on one switch to the Fibre Channel IP address of another switch to enable the other switch to forward IP traffic to the Ethernet port on the second switch. Gbps Gigabits per second (1,062,500,000 bits/second). SAN Switch 2/16 Version 3.1.x Installation Guide 109 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 110
Channel link from the E_Port of one switch to the E_Port of another. See also Services A protocol for link-related actions. Link As applies to Fibre Channel, a physical connection between two ports, consisting of both transmit and receive fibers. 110 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 111
Initialization Primitive; the signal used to begin initialization in a loop. Indicates either loop failure or resetting of a node. Looplet A set of devices connected in a loop to a port that is the open originator, and then enters the Open state. SAN Switch 2/16 Version 3.1.x Installation Guide 111 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 112
Power On Self-Test; a series of tests run by a switch after it is turned on. Private Device A device that supports arbitrated loop protocol and can interpret 8-bit addresses, but cannot and can communicate with either private or public NL_Ports. 112 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 113
can log into the fabric and support 20-bit addresses (or has 20-bit phantom addresses created for it by the switch). Public Loop An arbitrated loop that direction between two N_Ports. Service Rate The rate at which an entity can service requests. SAN Switch 2/16 Version 3.1.x Installation Guide 113 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 114
be accessed by an L_Port in the Open state. Translative Mode A mode in which private devices can communicate with public devices across the fabric. 114 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 115
when it is not connected or has not yet assumed a specific function in the fabric. UDP User Datagram Protocol; a protocol that runs on top of IP and provides port multiplexing for upper-level the XMITTED CLOSE state cannot attempt to arbitrate. SAN Switch 2/16 Version 3.1.x Installation Guide 115 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 116
partitioning of the fabric into logical groupings of devices. Devices in a zone can only access and be accessed by devices in the same zone. 116 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 117
28 airflow direction through switch 19 authorized reseller, HP 16 automatic self-discovery 18 26 cascading switches 70 changing switch password 80 changing the admin password 80 changing the admin user ID 80 checking default 65 domain IDs 65 SAN Switch 2/16 Version 3.1.x Installation Guide 117 - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 118
20 G getting help 15 H hardware features 19 help, obtaining 15 HP authorized reseller 16 storage website 15 technical support 15 hyperterminal 59 hyperterminal port settings 60 I ID domain 70 inner slide rails 32 installing 31, 32, 34, 35, 39, 68 interpreting LEDs 72 118 interpreting POST results - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 119
location 27 SAN Switch 2/16 Version 3.1.x Installation Guide Index separating inner support, HP 15 telnet 79 managing by 78 temperature, requirements 102 tests, diagnostic 84 text symbols 11 thermometers 19 three hole bar nuts 35 tips for installing 31 U upgrading or restoring the switch firmware - HP StorageWorks 2/16 | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 120
Index W warning rack stability 14 symbols on equipment 12 web tools 78 websites HP storage 15 weight, switch 100 Z zoning summary 18 120 SAN Switch 2/16 Version 3.1.x Installation Guide
installation
guide
hp
StorageWorks
SAN switch 2/16
version 3.1.x
Product Version:
3.1.x
Third Edition (June 2003)
Part Number:
AA-RR84C-TE
This installation guide provides basic procedures for setting up, configuring, and managing
the SAN Switch 2/16 and SAN Switch 2/16 power pak models.