HP StorageWorks 2/16V Brocade Fabric OS Documentation Addendum - Supporting Fa
HP StorageWorks 2/16V - SAN Switch Manual
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 2/16V manual content summary:
- HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 1
Fabric OS Documentation Addendum Supporting Fabric OS v5.2.X Publication Number: 53-1000429-01-HP Publication Date: 01/29/2007 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 2
or service names are or may be trademarks or service marks of, and are used to identify, products or services of their code, please visit http://www.brocade.com/support/oscd. Export of technical data contained in Communications Systems, Inc. 1745 Technology Drive San Jose, CA 95110 Tel: 1-408-333 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 3
Message Reference Updates to the Introduction Chapter 2-2 New Chapter, AG System Messages 2-2 AG-1001 2-2 Fabric OS v5.2.X Documentation Addendum iii Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 4
.1.3 3-5 connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 3-6 connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 3-7 connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 3-7 connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 3-7 iv Fabric OS v5.2.X Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 5
5 connUnitLinkTable 1.3.6.1.3.94.1.12 3-7 connUnitSnsTable 1.3.6.1.3.94.5.2.1 3-8 Web Tools Administrator's Guide Global Changes 4-1 Updates for the Brocade 5000 Switch 4-1 Updates for SilkWorm 4012, 4016, 4018, 4020, and 4024 Switches . . . . 4-1 Add Using WebTools on a Brocade Access Gateway - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 6
vi Fabric OS v5.2.X Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 7
's Guide" on page 5-1 Supported Hardware and Software This document is specific to Fabric OS v5.2.1 running on the following Brocade SilkWorm product models: • Brocade 5000 • Brocade SilkWorm 200E switch • Brocade SilkWorm 3250 switch • Brocade SilkWorm 3850 switch • Brocade SilkWorm 3900 switch - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 8
switches but not to others, this guide identifies which switches are supported guide are presented in mixed lettercase: for example, switchShow. In actual examples, command lettercase is often all lowercase. Otherwise, this manual specifically potential damage to hardware, firmware, software, or data. - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 9
• Web Tools Administrator's Guide • EZSwitchSetup Administrator's Guide Brocade 5000 • Brocade 5000 Hardware Reference Manual • Brocade 5000 QuickStart Guide SilkWorm 48000 • SilkWorm 48000 Hardware Reference Manual Fabric OS v5.2.X Documentation Addendum vii Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 10
3900 Hardware Reference Manual (for v4.x software) • SilkWorm 3900 QuickStart Guide (for v4.x software) • SilkWorm 3900 Fan Assembly Replacement Procedure • SilkWorm 3900 Motherboard Assembly Replacement Procedure viii Fabric OS v5.2.X Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 11
Guide (for v4.x software) SilkWorm 200E • SilkWorm 200E Hardware Reference Manual (for v5.x software) For practical discussions about SAN design, implementation, and maintenance, you can obtain Building SANs with Brocade Fabric Switches with the Fabric OS firmware. Optional Brocade Features Optional Brocade - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 12
fabric access and communication. Enables IBM host-based management programs to manage FICON fabric switches in-band by sending commands to the Fabric OS emulated control device. Other Industry .fibrechannel.org x Fabric OS v5.2.X Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 13
Information • Technical Support contract number, if applicable • Switch model • Switch operating system version • Error numbers and messages received • supportSave command output • Detailed description of the problem and specific questions • Description of any troubleshooting steps already performed - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 14
3014, 3016, 3250, 3800, 3850, 3900, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 7500 switches and SilkWorm 24000, and 48000 directors: Provide the license ID. Use the licenseIdShow command to display the license ID. . xii Fabric OS v5.2.X Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 15
1-2 • "Commands Updated in v5.2.1" on page 1-9 • "Commands Deprecated" on page 1-59 • "Updates for 5.2.0" on page 1-59 Fabric OS Documentation Addendum 1-1 Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 16
2-14. • Add the "licensePort" after licenseIDRemove on page 2-334. • Add "portcfgnport" after portcfgLPort on page 2-465. 1-2 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 17
to configure N_Port failover and failback policies. AG only supports embedded switch platforms that use the Goldneye ASIC. Operands This to the specified N_Port only. --mapset Maps F_Ports to a specific N_Port to the fabric. Any F_Port can be mapped to only one N_Port. -HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 18
:admin> ag --show Name : switch NodeName : 10:00:00:05:1e:35:10:57 Number of Ports : 16 IP Address(es) : 10.115.74.54 Firmware Version : v5.2.1.v5.2.x_maint_061106_2 N_Ports : 3 F_Ports : online information. 1-4 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 19
(1=enabled/0=disabled) : 1 Current F_Ports : 9;10;11;12; Configured F_Ports : 9;10;11;12; See Also portcfgnport, portcfgnpivport Fabric OS Documentation Addendum 1-5 Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 20
make adjustments to the dynamic assignments to adjust to specific site requirements. These options are used in the case where there can support. Operands This command has the following operands: --release portnumber Releases a license assignment from a port when the switch is 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 21
method is in use 15 port assignments are provisioned for use in this switch: 10 port assignments are provisioned by the base switch license 5 port assignments are provisioned by the first POD license * 5 (1), licenseHelp(1) Fabric OS Documentation Addendum 1-7 Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 22
switch that supports NPIV. The N_Port must have NPIV capability enabled. Note NPIV capability should be enabled on the ports connected to the Access Gateway. Use portCfgNPIVPort to enable NPIV capability on the specific 1-8 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 23
in v5.2.1 1 Commands Updated in v5.2.1 The commands in this section were changed to support the new Access Gateway mode and DPOD features. • Replace the "agshow" command. • Replace • Replace the "switchshow" command. Fabric OS Documentation Addendum 1-9 Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 24
The IP address of the Access Gateway. Firmware The version of the Access Gateway firmware running on Access Gateway. Local/Remote Describes Access Gateway. Use portCfgNPIVPort to enable NPIV capability on the specific port. Operands This command has the following operands: ag_name -01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 25
display the locally registered Access Gateways: switch:admin> agshow --local Name Ports Enet IP Addr Firmware Local/Remote WT_Stealth 16 10.202.90. display all registered Access Gateways: switch:admin> Name Ports Enet IP Addr Firmware Local/Remote WT_Stealth 16 10.202 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 26
switch: • "Switch Services Settings" • "Portlog Events Enable/Disable Settings" • "Application Attributes" Note If executed on an enabled switch switch using saves changes made. Switch Fabric Settings There are specific applications or operating environments but must be in agreement among all switches - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 27
(R_A_TOV) is displayed in milliseconds. This variable works with the variable E_D_TOV to determine switch actions when presented with an error condition. Allocated circuit resources with detected errors are not the fabric. Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-13 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 28
related. Assigning a specific value to one each parameter. To reduce problems, the configuration utility switches to avoid the need to reboot host systems when static PID binded is used. Per-frame Route Priority In addition to the eight virtual channels used in frame routing priority, support HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 29
The switch enables fine-tuning for a specific switch. Table 2-3 F_Port Login Parameters Field Type Default Range Maximum logins per switch Number 15*ports 1 to 126*ports Maximum logins per port Number 126 1 to 255 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 30
in table. Table 2-4 RSCN Transmission Modes Field End-device RSCN Transmission Mode Domain RSCN to End-device for switch IP address or name change Type number number Default 1 0 Range 0 to 2 0 to 1 End- are not sent. 1-16 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 31
/Off Descriptions of the system service settings are as follows: rstatd this information is supported by a number of operating systems that support RPC. On most UNIX-based systems (HP-UX, Irix, interface to a switch, including sectelnet. If you are using SSH to manage a switch, you can disable - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 32
-D) When entered at a prompt with no preceding input, terminates the command and saves changes made. 1-18 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 33
Level number 0 0, 1, 2 rpcd RPCd Enabled boolean On On/Off Secure RPCd Callback boolean Off On/Off cfgload Secure Config Upload and Download boolean Off On/Off Note The secure protocols must not be enabled before setting SSL attributes correctly. Fabric OS Documentation Addendum - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 34
send RSCN?: (0..1) [0] Do Not Allow AL_PA 0x00?: (0..1) [0] System services(yes, y, no, n): [no] yes rstatd(on, off): [off telnetd (on, off): [on] Portlog events enable (yes, y, no, n): [no] yes start(a switch start or re-start event ) (on, off): [on] disable(a port is disabled ) (on, -01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 35
on] (on, off): [on] (on, off): [on] (on, off): [on] create(a task is created start(a switch start or re-start event disable(a port is disabled enable(a port is enabled ioctl(a port I/O control is executed) Tx(a frame page) Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-21 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 36
event(fss event log ) msg(fss message log ) switch(switch driver log ) ficonq(ficon queue and ELS measurements ) routing(switch/blade drivers routing logs ) Committing configuration...done. (on, off): , 1 1. 1-22 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 37
and modify threshold information for the Fabric Watch configuration. Switch elements monitored by Fabric Watch are divided into classes, port. Note This command requires a Fabric Watch license. Not all platforms support fans or power supplies. If you attempt to configure values for these 01-HP 1-23 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 38
The execution of this command is subject to Admin Domain restrictions that may be in place. In Access Gateway mode, only the following classes are supported. F/FL Port (Copper) class is supported only on Embedded platforms. 1-24 Fabric OS Documentation Addendum Publication Number: 53-1000429-01 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 39
Performance TX Performance Filter Performance Monitor Customer Defined Resource Flash Note Not all platforms support fans or power supplies. If you attempt to configure values for these items --enable --port portNumber Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-25 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 40
a Fabric Watch license. Examples To configure thresholds in Fabric OS mode: switch:admin> fwconfigure 1 : Environment class 2 : SFP class 3 : Port 5 : return to previous page Select choice => : (1..5) [5] switch:admin> fwConfigure --disable --port 1 1-26 Fabric OS Documentation Addendum - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 41
a threshold 3 : enable a threshold 4 : advanced configuration 5 : return to previous page Select choice => : (1..5) [5] 5 See Also fwClassInit, fwConfigReload, fwShow Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-27 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 42
disabled. In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper) class threshold is supported only on Embedded platforms. Table 2-8 Access Gateway mode classes Class disabled. 1-28 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 43
fwShow 1 Examples To display thresholds and port persistence time: switch:user> fwshow 1 : Show class thresholds 2 : Detail threshold information 3 : Show console envFan002 Env Fan 2 2518 RPM envFan003 Env Fan 3 2481 RPM switch:user> fwshow 1 : Show class thresholds 2 : Detail threshold - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 44
switch:user> fwshow --port --persistence FW: current port persistence time = 18s switch:user> fwShow --disable --port Port Threshold Status 1 disabled See Also fwClassInit, fwConfigReload, fwConfigure, fwSet 1-30 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 45
switch or CP. The command's usage varies depending on whether it is being used on a chassis-based system or non chassis-based switch set the switch IP address use -sw. When setting the switch, the command and Gateway IP address. Valid switch and CP numbers depend on of logical switch 0. 1 Sets - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 46
only; mixed case is for readability Examples To set the IP address details for switch number 1 on a chassis-based system: switch:admin> ipaddrset -sw 1 Ethernet IP Address [192.168.166.148]: Ethernet Also ipAddrShow 1-32 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 47
To display the IP address for logical switch 0: switch:admin> ipaddrshow -sw 0 Ethernet IP Address: 192.168.166.147 Ethernet Subnetmask: 255.255.255.0 Fibre Channel IP Address: 0.0.0.0 Fibre Channel Subnetmask: 0.0.0.0 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-33 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 48
only; mixed case is for readability Examples To set the IP address details for switch number 1 on a chassis-based system.: switch:admin> ipaddrset -sw 1 Ethernet IP Address [192.168.166.148]: Ethernet See Also ipAddrSet 1-34 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 49
displays port configuration settings for all ports on a switch, except gigabit Ethernet (GbE) ports. Additionally, use this command to display specific FCIP parameters configured for a gigabit Ethernet port, command. Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-35 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 50
valid ports. This operand is optional; if omitted, this command displays information for all ports. 1-36 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 51
portCfgShow 1 Examples To display the configuration settings for a switch: switch:user> portcfgshow Ports of Slot 2 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Speed AN AN where AN:AutoNegotiate, ..:OFF, ??:INVALID Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-37 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 52
lowercase only; mixed case is for readability To display the configuration settings for a port: switch:user> portcfgshow 2/16 Area Number: 144 Speed Level: AUTO Trunk Port ON Long portCfgSpeed, portCfgTrunkPort 1-38 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 53
iscsi| mode ] [slot] [ge port] Description Use this command to display general or switch and port-specific status information for the specified port. portshow with operands other than slot or ge port will ) present. Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-39 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 54
WWN of the front domain. Pr Switch Info Information on the principal switch of the edge fabric attached to this the domain ID and WWN of the principal switch. BB XLate Information on the xlate (translate switch with no security, then the authentication is displayed as "None". If the edge switch - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 55
"DH_CHAP". DH-CHAP is the only supported authentication type. DH Group If the EX_Port is connected to an edge switch with no security, then the value is "N/A". If the edge switch is in secure mode, then the received. Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-41 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 56
displayed, relative to its slot for bladed systems. See switchShow for a list of valid ports. 1-42 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 57
: 0 Port part of other ADs: Yes Frjt: 0 Fbsy: 0 To display IP interfaces on a GbE port: switch:admin> portshow ipif ge0 GE Port 0/ge0 Interface IP Address NetMask MTU 0 192.168.255.20 255.255.255.0 .0 1500 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-43 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 58
case is for readability To display the connection parameter information on an FCIP tunnel on a GbE port: switch:admin> portshow fciptunnel ge1 0 -params Port: ge1 Tunnel ID 0 Remote IP Addr 192.168.255 ) [Output Truncated] 1-44 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 59
168.255.25 00:01:02:03:04:60 Permanent, Resolved, To display IP routes on a GbE port: switch:admin> portshow iproute ge0 GE Port 0/ge0 IP Address Mask Gateway Metric Flags 192.168.255.0 255.255.255 168.255.25 1 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-45 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 60
1 portshow Note: Enter commands in lowercase only; mixed case is for readability To display iSCSI Port WWN and Sessions: switch:admin> portshow isci 2/ge0 GE Port 2/ge0 Port WWN Sessions 50:06:06:9e:40:09:a2:00 0 See Also authUtil, portCfg, portCfgLongDistance, portLoginShow, portName, - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 61
.The FFDC data will be removed after the command. If there are BP blades installed in the switch, it also retrieves support file (as a .tar.gz file) from each slot. Operands The operands are as follows: other options. Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-47 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 62
support information to an FTP server in noninteractive mode: switch support information for switch support information for switch:routing1, module:TRACE_NEW... ..._files/routing1-S6-200508280151-new-tracedump.dmp: 12.00 MB 1.91 MB/s Saving support information for switch support information for switch - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 63
for switch:routing1, slot 9... slot 9 support file transfer done To save RASLOG, TRACE, and supportShow, core file, FFDC data, and other support information to an FTP server in interactive mode on a dual CP system: Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-49 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 64
Directory: tmp Saving support information for switch:routing1, module:RASLOG... support information for switch:routing1, module:RCS_Log... ...sipportSave_files/routing1-S6-200508280207-RCS_Log.ss: 4.65 kB 1.55 kB/s Saving support information for switch Saving support information for switch:swd76, - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 65
support information for switch:routing1, module:CORE_FFDC... No core or FFDC data files found! Saving support information for switch:routing1 support information for switch:routing1, slot 3... slot 3 support file transfer done Saving support information for switch:routing1, slot 9... slot 9 support - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 66
switchBeacon Synopsis Description Sets switch beaconing mode on or off. switchbeacon [mode] Use this command to enable or disable switch beaconing mode. When To turn beaconing mode on: switch:admin> switchbeacon 1 To turn beaconing mode off: switch:admin> switchbeacon 0 See Also switchShow - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 67
will continue to the maximum port of the platform. Index is to identify the port number relative to the switch. Index column is only displayed for slot-based platforms. Slot Slot number; 1-4 and 7-10. Port Port number Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-53 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 68
in sync. Laser_Flt Module signaling a laser fault. Port_Flt Port marked faulty. Diag_Flt Port failed diagnostics. 1-54 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 69
by GE port. ISCSI Ports support ISCSI. FCIP Ports support FCIP. The comment field is blank, or displays: Disabled Port is disabled. Bypassed Port is bypassed (loop only). Loopback Port is in loopback mode. E_Port Fabric port; displays WWN and name of attached switch. If the port is configured - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 70
the number of ports on the switch. -iscsi Causes the switchShow command to switch. To display the port count: switch:admin> switchshow -portcount ports= 64 To display GE ports with iSCSI sessions: switch switchShow displays WWN of the of the border switch attached to this N_Port as a 24-bit Port - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 71
switchshow 1 To display switch information: top_4a3_a10:admin> switchshow switchName: top_4a3_a10 switchType: 42.1 switchState: Online switchMode: Native switchRole: Subordinate 8 ge1 id 1G Online FCIP Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP 1-57 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 72
case is for readability To display switchShow with agmode enabled: switch:admin> switchName: switchType: switchState: switchMode: switchWwn: switchBeacon: switchshow switch 34.0 Online Access Gateway Mode 10:00:00:05: 1-58 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 73
functionality is available using the auditcfg -show command. Updates for 5.2.0 Update the slTest command Update the supported platform list in the slTest command as follows: The slTest command is supported only on SilkWorm 200E, 4012, 4100, and 48000 platforms. Note that the SilkWorm 4900 is not - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 74
1 Updates for 5.2.0 Note: Enter commands in lowercase only; mixed case is for 1-60 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 75
following sections: • "Updates to the Introduction Chapter" on page 2-2 • "New Chapter, AG System Messages" on page 2-2 Fabric OS Documentation Addendum 2-1 Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 76
to a fabric port that does not support NPIV Probable Cause Recommended Action Severity Indicates support NPIV. Enable NPIV on the port connected to the Access Gateway using the portCfgNpivPort command on the fabric switch. Refer Fabric OS Command Reference Manual switch service provider. WARNING 2-2 Fabric - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 77
over N_Port . Fail over across different fabric is not supported. Probable Cause Recommended Action Severity Indicates that an F_Port could not FTP transfers; then run the supportSave command and contact your switch service provider. ERROR AG-1005 Message , [AUTH-1005], 01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 78
driver configuration of the host connected to the specified F_Port. Access Gateway supports to the fabric switch is not online Gateway N_Port and the fabric switch port. WARNING AG-1008 Message that the fabric switch management server did the configuration on the fabric switch that is connected to the - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 79
contact your switch service provider. problem with the Secure Fabric OS. Cause Recommended Action Verify the configuration of the fabric switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 80
as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. WARNING AG-1013 Message , [AG-1013], ,, INFO, - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 81
to the MIB-II (RFC1213-MIB)" on page 3-3 • "Updates to the FibreAlliance MIB Objects" on page 3-4 Fabric OS Documentation Addendum 3-1 Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 82
a switch in Access Gateway does support name server services. FE-MIB No Disabled in Access Gateway because the conventions are specific to fabric switches. CPQ-Rack MIB Limited Supported on embedded switches only. 3-2 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 83
following information. sysDescr 1.3.6.1.2.1.1.1 Default The switch type. The default value is either Fibre Channel Switch or Access Gateway. sysObjectID 1.3.6.1.2.1.1.2 type. The default value is either: • Fibre Channel Switches: iso.org.dod.internet.private.enterprises.bcsi.commDev.fibrechannel. - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 84
justified with leading 0s if required. If this value is not applicable, return all bits to 1. Set to the switch domain ID (as per FC-SW). For a Brocade Access Gateway device, the value is hard coded as "11 returns "unknown." 3-4 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 85
maximum number of system supported ports, use the SNMP GET command on swFcPortCapacity. Each switch supports 0 to maximum number of system supported ports. The maximum number of supported ports is as N_Port (n-port) only. Fabric OS Documentation Addendum 3-5 Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 86
supported in Fabric OS v2.6.1) • ssa (19) Serial storage architecture. (Not supported in Fabric OS v2.6.1.) connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 Bit mask that specifies the classes of service value is 0x0008. An Access Gateway supports class-three services only, therefore the value is 8 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 87
service supports class-three services a Fibre Channel switch. A Fibre Channel switch port FC ID .1.22 Not supported in Fabric , if the switch has WWN 10 switch. The N_Ports on a Brocade Access Gateway are the WWN of the switch switch data and Y is other end. Fabric OS Documentation - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 88
Access Gateway: connUnitSnsTable 1.3.6.1.3.94.5.2.1 This table contains an entry for each object registered with this port in the switch. Implementation of the Connectivity Unit Service Tables group is mandatory for all systems. A Brocade Access Gateway has no name server information; therefore this - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 89
This section explains the global changes required to support hardware specific instructions: • "Updates for the Brocade 5000 Switch" on page 4-1 • "Updates for SilkWorm 4012, 4016, 4018, 4020, and 4024 Switches" on page 4-1 Updates for the Brocade 5000 Switch Add the Brocade 5000 everywhere that the - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 90
Access Gateway When Access Gateway mode is enabled on switches managed through Web Tools, only a limited subset of menus and options related management are available. A switch in Access Gateway mode is considered a device management tool and not a fabric switch, therefore all fabric related - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 91
supported switches only). Ports on Demand is ready to be unlocked in the switch firmware. Its license might be part of the licensed Paper Pack supplied with switch switch type, and the Not supported For the SilkWorm 4018, 4016, 4020, and 4024 switches only OS Administrator's Guide. In the - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 92
Ports on Demand licensed product. For instructions, see "Activating a License on a Switch" on page 3-15. 2. Enable supported on the SilkWorm 4018, 4020, and 4024 switches only. If you click the Enable DPOD button on an unsupported switch, an error message displays. 1. Click a port in the Switch HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 93
DPODs causes traffic disruption. Any prior port associations and assignments are lost the next time the switch is rebooted. You must be logged in as Admin to enable or disable the Dynamic PODs feature. 1. Click set to static. Fabric OS Documentation Addendum 4-5 Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 94
PODs feature is supported on the SilkWorm 4018, 4020, and 4024 switches only. You must disable the port or switch before reserving or releasing a license. 1. Click a port in the Switch View to launch the (see Figure 4-2). 4-6 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 95
are for the iSCSI Administrators Guide, part number 53-1000412-01 # iSCSI blades in a switch # iSCSI sessions per FC4-16IP blade # iSCSI sessions per switch # TCP connections per switch 8 4 512 1024 1024 only gets addresses from targets that support the ReportLuns command. Fabric OS Documentation Addendum 5-1 - HP StorageWorks 2/16V | Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 96
5 Replace iSCSI Target Gateway Scalability Guidelines Table 5-2 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP
Publication Number: 53-1000429-01-HP
Publication Date:
01/29/2007
Fabric OS
Documentation Addendum
Supporting Fabric OS v5.2.X