HP StorageWorks 2000i HP StorageWorks 2000i G2 Modular Smart Array user guide
HP StorageWorks 2000i - G2 Modular Smart Array Manual
View all HP StorageWorks 2000i manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 2000i manual content summary:
- HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 1
HP StorageWorks 2000i G2 Modular Smart Array User Guide Part number: 481598-002 First edition: May 2009 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 3
configurations 32 Single controller configuration 32 One server/one HBA/single path 32 Dual controller configurations 32 One server/one HBA/dual path 32 Two servers/one HBA per server/dual path 32 Connecting remote management hosts 32 HP StorageWorks 2000i G2 Modular Smart Array User Guide 3 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 4
the drive enclosure back panel OK LED off 50 Is the drive enclosure Fault/Service Required LED amber 51 Controller failure in a single-controller configuration 52 If the controller has failed or does not start, is the Cache Status LED on/blinking 52 Transporting Cache 52 Isolating a host-side - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 5
A Environmental requirements and specifications 57 Safety requirements 57 Site requirements and guidelines 57 Site wiring and AC notice 67 Electrostatic discharge 67 Preventing electrostatic damage 67 Grounding methods 68 Index 69 HP StorageWorks 2000i G2 Modular Smart Array User Guide 5 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 6
6 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 7
dual-controller enclosure and one MSA70 drive enclosure 24 5 Cabling connections between a dual-controller enclosure and three MSA70 drive enclosures 25 6 Cabling connections between a dual-controller enclosure and mixed drive enclosures 26 HP StorageWorks 2000i G2 Modular Smart Array User Guide - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 8
8 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 9
55 9 Controller module temperature sensors 55 10 Power supply temperature sensors 56 11 Voltage sensor descriptions 56 12 Rackmount enclosure dimensions 59 13 Rackmount enclosure weights 59 14 Operating environmental specifications 59 HP StorageWorks 2000i G2 Modular Smart Array User Guide 9 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 10
10 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 11
(iSCSI) and Ethernet protocols Related documentation In addition to this guide, please refer to other documents for this product: • HP StorageWorks MSA2000 G2 Installation Instructions • HP StorageWorks 2000 G2 Modular Smart Array Cable Configuration Guide • HP StorageWorks 2000 G2 Modular Smart - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 12
Convention Medium blue text: Figure 1 Medium blue, underlined text (http://www.hp.com) Bold font Element Cross-reference links and e-mail addresses Web site data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 13
resources. • After signing up, you can quickly locate your products by selecting Business support and then Storage under Product Category. HP web sites For other product information, see the following HP web sites: • http://www.hp.com HP StorageWorks 2000i G2 Modular Smart Array User Guide 13 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 14
www.hp.com/go/msa • http://www.hp.com/service_locator • http://www.hp.com/go/storage • http://www.hp.com/support/ • http://www.docs.hp.com Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, please send a message to storagedocs.feedback@hp - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 15
of supported servers, operating systems, disk drives, and options. QuickSpecs can be found from your HP MSA products page at http://www.hp.com/go/msa. Select MSA SAN Arrays, and then select your product. The link for QuickSpecs will be on the right. HP StorageWorks 2000i G2 Modular Smart Array User - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 16
16 Overview - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 17
2 Disk drive Online/Activity LED 3 Disk drive Fault/UID LED Right ear MSA2000 4 Unit Identification (UID) LED 5 Fault ID LED 6 Heartbeat LED 4 5 6 Right ear MSA2000 4 Unit Identification (UID) LED 5 Fault ID LED 6 Heartbeat LED 4 5 6 HP StorageWorks 2000i G2 Modular Smart Array User Guide 17 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 18
G2 and 2324i G2 12 3 45 6 7 LINK iSCSI 1 ACT LINK iSCSI 2 ACT LINK iSCSI 1 ACT LINK iSCSI 2 ACT 9 - 8 12 1 AC Power supplies 2 AC Power switches 3 Host ports 4 CLI port 5 Network port 18 Components 6 Service port (used by service personnel only) 7 Expansion port 8 Optional iSCSI controller - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 19
firmware version 2.18 or later. For information about the MSA70, see the HP StorageWorks 70 Modular Smart Array Enclosure user guide located on the MSA2000 Software Support/Documentation CD shipped with your product or at http://hp.com/support/manuals. Cache To enable faster data access from disk - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 20
CompactFlash, you must transport the CompactfFlash from the failed controller to the replacement controller using a procedure outlined in the HP StorageWorks 2312i/2324i G2 controller replacement instructions, shipped with the replacement controller. Failure to use this procedure will result in the - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 21
2000 Modular Smart Array Software Support/Documentation CD shipped with your product. NOTE: For information on NEBS Level-3 compliant carrier-grade enclosures, see http://www.hp.com/products1/servers/carrier_grade/products/cgblades/enclosure. HP StorageWorks 2000i G2 Modular Smart Array User Guide - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 22
, including detailed steps to upgrade the firmware, see the HP StorageWorks 70 Modular Smart Array Enclosure User Guide located on the MSA2000 Software Support/Documentation CD shipped with your product, or at http://hp.com/support/manuals. Connecting controller and mixed-connect 3.5" and 2.5" drive - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 23
a single-controller enclosure and one MSA2000 3.5" 12-drive enclosure Controller A 1A Controller B 1B In Out 2A In Out 2B Figure 2 Cabling connections between a dual-controller enclosure and one MSA2000 3.5" 12-drive enclosure HP StorageWorks 2000i G2 Modular Smart Array User Guide 23 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 24
B 1B Out In 2A Out 2B In Out 3A In Out 3B In Out In 4A Out 4B In Figure 3 Cabling connections between a dual-controller enclosure and three MSA2000 3.5" 12-drive enclosures Controller A 0A Controller B 0B 1A In Out 1B In Out Figure 4 Cabling connections between a dual - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 25
Controller A 0A Controller B 0B 1A In Out 1B In Out 2A In Out 2B In Out 3A In Out 3B In Out Figure 5 Cabling connections between a dual-controller enclosure and three MSA70 drive enclosures HP StorageWorks 2000i G2 Modular Smart Array User Guide 25 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 26
options and associated illustrations, see the HP StorageWorks 2000 G2 Modular Smart Array Cable Configuration Guide. Testing enclosure connections 1. Press the power switches at the back of each drive enclosure to On. IMPORTANT: This ensures that the disks in the enclosures have enough time to - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 27
can cause management hosts to lose access to the storage system. 1. From your network administrator, obtain an IP address, subnet mask, and gateway address for controller A and controller B. HP StorageWorks 2000i G2 Modular Smart Array User Guide 27 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 28
2. Use the provided micro-DB9 serial cable to connect controller A to a serial port on a host computer. iSCSI 1 iSCSI 2 CLI CLI Service DIRTY CACHE SAS 1 ACTIVITY LINK Connect serial cable to CLI port on controller faceplate Your package contents include a micro-DB9-to-DB9 serial cable. If - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 29
Controller, communication with it is temporarily lost until it successfully restarts. Type the following command to restart the management controller on both controllers: restart mc both 10. When you are done using the CLI, exit the emulator. HP StorageWorks 2000i G2 Modular Smart Array User Guide - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 30
30 Installing the enclosures - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 31
. Each controller provides two iSCSI host ports - supporting data rates up to 1Gb/second, featuring a 1.8 GHz processor with128 MB memory, and 1 GB cache - using either one-way or mutual CHAP (Challenge-Handshake Authentication Protocol). HP StorageWorks 2000i G2 Modular Smart Array User Guide 31 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 32
Modular Smart Array and 2324i Modular Smart Array use Unified LUN Presentation (ULP) - a controller firmware feature enabling hosts to access mapped volumes via host ports - without the need for internal or external switches. Connecting direct attach configurations The 2312i G2 and 2324i G2 support - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 33
firmware version is shown as EMP B Revision. For software and firmware updates, including update instructions, go to http://www.hp.com/go/msa. Select MSA SAN Arrays, select your product, and go to Support for the upgrade is very important. HP StorageWorks 2000i G2 Modular Smart Array User Guide 33 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 34
updates, go to http://www.hp.com/go/msa. Select MSA SAN Arrays, select your product, and go to Support. For detailed steps on updating the firmware, see the reference guide or the CLI reference guide. For information on logging into SMU, see Configuring a system for the first time on page 41 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 35
has been identified, but the problem needs attention. Off - No fault condition exists. Green - The enclosure is powered on with at least one power supply operating normally. Off - Both power supplies are off; the system is powered off. HP StorageWorks 2000i G2 Modular Smart Array User Guide 35 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 36
Fault/UID (amber/blue) 2 Online/Activity (green) Table 6 Disk drive LED combinations Online/Activity (green) Fault/UID (amber/blue drive has been selected by a management application (SMU). Blue; solid The controller is driving I/O to the drive, and it has been selected by a management application - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 37
Port Link Status Off - The Ethernet port is not connected or the link is down. Green - The Ethernet link is up. 9 Network Port Activity Off - The Ethernet link has no I/O activity. Blinking green- The Ethernet link has I/O activity. HP StorageWorks 2000i G2 Modular Smart Array User Guide 37 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 38
See also If the controller has failed or does not start, is the Cache Status LED on/blinking? on page 52). If the LED is blinking evenly, a cache flush is in progress. When a controller module loses power and write cache is dirty (contains data that has not been written to disk), the super-capacitor - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 39
detailed steps to upgrade the firmware, see the HP StorageWorks 70 Modular Smart Array Enclosure User Guide located on the MSA2000 G2 Software Support/Documentation CD shipped with your product, or at http://hp.com/support/manuals. HP StorageWorks 2000i G2 Modular Smart Array User Guide 39 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 40
Green - Power is on and input voltage is normal. Off - Power is off or input voltage is below the minimum threshold. 2 DC Voltage/Fan Fault/Service Required Amber - DC output voltage is out of range or a fan is operating below the minimum required RPM. Off- DC output voltage is normal. 40 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 41
QuickSpecs for currently supported browsers. QuickSpecs can be found from your HP MSA products page at http://www.hp.com/go/msa. Select MSA SAN Arrays, and then select your product. The link for QuickSpecs controller password of a default HP StorageWorks 2000i G2 Modular Smart Array User Guide 41 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 42
a required setting. • Many tables can be sorted by a specific column. To do so, click the column heading to sort about using SMU, see the Getting Started topic in SMU's reference guide and help. Tips for using the . You can set the date and time manually or configure the system to use Network Time - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 43
Optional. If the system should retrieve time values from a specific NTP server, enter the address of an NTP server. If no IP server address is set, the system listens for time messages sent by an NTP server in broadcast mode. 3. Click Apply. HP StorageWorks 2000i G2 Modular Smart Array User Guide 43 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 44
• Password for default users. • Network-port configuration. • System-management services, including the following out-of-band and in-band services: • Web browser interface, known as SMU (Storage Management Utility). • Command Line Interface (CLI). • Storage Management Initiative Specification (SMIS - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 45
maximum number of disks to select. You can also assign spare disks to automatically replace any disks that fail. • Number and size of storage volumes to create in the vdisk. By default, the new Request dialog is displayed. 2. Click Sign Out. HP StorageWorks 2000i G2 Modular Smart Array User Guide 45 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 46
46 Configuring a system for the first time - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 47
drive module, controller module, or fault, review the enclosure disk if a user changes channel settings without taking the storage resources assigned to it into consideration. In addition, the type of fault can help you isolate the problem HP StorageWorks 2000i G2 Modular Smart Array User Guide 47 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 48
that both controllers are operating normally. 2. In the Configuration View panel, right-click the system and select Tools > Rescan Disk Channels. 3. . • Check the event log for specific information regarding the failure. Is the controller back panel Fault/Service Required LED amber? Answer No Yes - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 49
is powered on and operational. • In SMU, review event logs for indicators of a specific fault in a host data path component. • Contact an authorized service provider for assistance. • See Isolating a host-side connection fault on page 53. HP StorageWorks 2000i G2 Modular Smart Array User Guide 49 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 50
by a defective cable. Replace cable if necessary. • In SMU, review event logs for indicators of a specific fault in a host data path component. • Contact an authorized service provider for assistance. • See Isolating a controller module expansion port connection fault on page 54 Is a connected port - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 51
the fault. • Isolate the fault. • Contact an authorized service provider for assistance. • Replace if necessary. • If installing an I/O module FRU, try removing and reinstalling the new I/O module, and check the event log for errors. HP StorageWorks 2000i G2 Modular Smart Array User Guide 51 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 52
disks. If the problem persists, replace the controller. Transporting Cache To preserve the existing data stored in the CompactFlash, you must transport the CompactFlash from the failed controller to a replacement controller using a procedure outlined in the HP StorageWorks 2312i/2324i G2 controller - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 53
the host link status LED on? • No - The controller module's port has failed. Replace the controller module. • Yes - Monitor the connection for a period of time. It may be an intermittent problem, which can occur with damaged cables and HBAs. HP StorageWorks 2000i G2 Modular Smart Array User Guide 53 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 54
one variable at a time can complicate the troubleshooting process. 1. Halt all I/O to the storage link status. This step isolates the problem to the expansion cable or to the controller module's expansion port. Is the each power supply's DC Voltage/Fan Fault/Service Required LED is off or by using - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 55
alert you to problems. Power, cooling fan, temperature, and voltage sensors are located at key points in the enclosure. In each controller module and Critical operating Shutdown values range > 90°C 0°C 100°C None 0°C 100°C None None HP StorageWorks 2000i G2 Modular Smart Array User Guide 55 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 56
Table 9 Controller module temperature sensors (continued) Description Onboard temperature 2 Onboard temperature 3 (Capacitor temperature) CM temperature Normal operating Warning range voltage, 5V Power supply 1 voltage, 3.3V < 11.00V > 13.00V < 4.00V > 6.00V < 3.00V > 3.80V 56 Troubleshooting - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 57
specifications Safety requirements Install the system in accordance with the local safety codes and regulations at the facility site. Follow all cautions and instructions each other, and each must be controlled by a separate circuit breaker at HP StorageWorks 2000i G2 Modular Smart Array User Guide 57 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 58
components for servicing. Removing a controller enclosure. After you configure one or both of the controller modules with an Internet Protocol (IP) address, you then use a remote management host on an Ethernet network to configure, manage, and monitor. 58 Environmental requirements and specifications - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 59
enough to support the combined weight of the rack, controller enclosures, expansion controller or expansion modules, and two power supplies installed. .Table 12 Rackmount enclosure dimensions Specifications 500 Hz to 5 Hz, swept-sine HP StorageWorks 2000i G2 Modular Smart Array User Guide 59 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 60
, connect the two power cords to two separate circuits; for example, to one commercial circuit and one uninterruptible power source (UPS). 60 Environmental requirements and specifications - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 61
on conductive floors or dissipating floor mats. • Use conductive field service tools. • Use a portable field service kit with a folding static-dissipating work mat. If you do with product installation, contact an authorized reseller. HP StorageWorks 2000i G2 Modular Smart Array User Guide 61 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 62
62 Electrostatic discharge - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 63
operation. For questions regarding your product, visit http://www.hp.com. For questions regarding this FCC declaration, contact us by mail or telephone: • Hewlett-Packard Company P.O. Box 692000, Mailstop 510101 Houston, Texas 77269-2000 HP StorageWorks 2000i G2 Modular Smart Array User Guide 63 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 64
array is located behind the left ear on the side of the chassis. Laser device All HP systems equipped with a laser device comply with safety standards, including International Electrotechnical Commission (IEC) 825. With specific no user-serviceable components inside. • Do not operate controls, make - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 65
Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family. This compliance hp.com/go/certificates. Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany HP StorageWorks 2000i G2 Modular Smart Array User Guide - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 66
is a danger of explosion and risk of personal injury if the battery is incorrectly replaced or mistreated. Replacement is to be done by an HP authorized service provider using the HP spare part designated for this product. For more information about battery replacement or proper disposal, contact an - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 67
(12 ft). If you have questions about the type of power cord to use, contact an HP authorized service provider. Route power cords so that they will not be walked on and cannot be pinched by and storing products in static-safe containers. HP StorageWorks 2000i G2 Modular Smart Array User Guide 67 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 68
tools. • Use a portable field service kit with a folding static-dissipating work mat. If you do not have any of the suggested equipment for proper grounding, have an HP authorized reseller install the part. NOTE: For more information on static electricity, or assistance with product installation - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 69
59 troubleshooting 47 ESD (electrostatic discharge) prevention measures 67 storing products 67 transporting products 67 Ethernet cables requirements 32 European Union, regulatory compliance notice 65 expansion port LED troubleshooting 54 HP StorageWorks 2000i G2 Modular Smart Array User Guide 69 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 70
G ground strap specifications 68 grounding methods 68 straps, wearing 68 suggested equipment for 68 H hard drive bay numbers 18 heel straps, using 68 help, obtaining 13 HP address for FCC questions 63 series number 64 storage web site 14 Subscriber's choice web site 13 technical support 13 telephone - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 71
initialize 47 using system LEDs 48 V ventilation requirements 58 version information checking 33 vibration operating range 59 virtual disks viewing status 45 voltage compliance rating 67 volumes verifying 45 W warnings lasers, radiation 64 HP StorageWorks 2000i G2 Modular Smart Array User Guide 71 - HP StorageWorks 2000i | HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 72
rack stability 13 voltage and temperature 54 web sites HP documentation 11 HP storage 14 HP Subscriber's choice 13 web-browser configuration 41 work mat, static-dissipating 68 wrist straps specifications 68 using 68 72
HP StorageWorks
2000i G2 Modular Smart Array
User Guide
Part number: 481598-002
First edition: May 2009