HP StorageWorks 4/32 Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602-
HP StorageWorks 4/32 - SAN Switch Manual
View all HP StorageWorks 4/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 4/32 manual content summary:
- HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 1
53-1000602-01 October 19, 2007 Fabric OS MIB Reference Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x, v5.0.x, v5.1.x, v5.2.x, v5.3.x, v6.0.0 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 2
license agreements. To find-out which open source software is included in Brocade products, view the licensing terms applicable to the open source software, and obtain a copy of the programming source code, please visit http:// www.brocade.com/support/oscd. Export of technical data contained in this - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 3
. October 2003 Update to support the December 2003 Brocade 3250, 3850, and 24000 switches. Updated to support September the Brocade 4100. 2004 Updated to support the Brocade 48000 and 200E. April 2005 Updated to support the Brocade 4900, 7500, and FR4-18i blade. January 2006 Changed name - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 4
- HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 5
MIBs 6 MIB Loading Order 7 Brocade 7500 / FR4-18i and Brocade MIBs 9 Access Gateway and Brocade MIBs 9 Firmware Upgrades and Enabled Traps 9 Fabric OS Commands for Configuring SNMP 10 Support for Administrative Domains 10 Support for Role Based Access Control 10 Support for IP V6 Addressing - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 6
Chapter 3 Chapter 4 IP Group 25 ICMP Group 32 TCP Group 36 UDP Group 39 EGP Group 40 Transmission Group 40 SNMP Group 40 ifMIB Group 44 FE MIB Objects FE MIB Overview 49 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 7
Flash Administration 140 swFabric Group 145 SW Agent Configuration Group 148 Fibre Channel Port Group 150 Name Server Database Group 156 Event Group 159 Fabric Watch Group 161 End Device Group 169 Switch Group 170 ASIC Performance Monitoring Group 172 Trunking Group 174 High-Availability - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 8
MIB Objects 200 Definitions for FCMGMT-MIB 205 ConnSet Group 207 Statistics Group 233 Service Group 241 SNMP Trap Registration Group 244 Revision Number Scalar 246 Unsupported Tables 246 273 MIB Object Groupings Switch Variables 277 Sensor Variables 277 Port Variables 277 Event Variables - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 9
Appendix B Index MIB OIDs and Their Matching Object Names MIB OIDs 281 Fabris OS MIB Reference ix 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 10
x Fabris OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 11
Supported Hardware and Software Brocade SNMP" provides an introduction to Brocade support for 7500 switches and FC4-18i blades. • Chapter 10, "iSCSI MIB Objects"provides information on iSCSI MIB support for 7500 switches and FC4-18i blades. • Appendix A, "MIB Object Groupings" is a function-based - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 12
• Brocade 7500 Switch • Brocade 7600 Switch • Brocade 12000 Director • Brocade 24000 Director • Brocade 48000 Director • Brocade DCX Director • FA4-16 Blade • FC10-6 Blade • FC4-16IP Blade • FC4-48C Blade • FR4-18i Blade • FC8-16 Blade • FC8-32 Blade • FC8-48 Blade Although many different software - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 13
in the narrative portions of this guide are presented in mixed lettercase: for lettercase is often all lowercase. Otherwise, this manual specifically notes those cases in which a command caution alerts you to potential damage to hardware, firmware, software, or data. A warning alerts you to - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 14
Secure Fabric OS Administrator's Guide For practical discussions about SAN design, implementation, and maintenance, you can obtain Building SANs with Brocade Fabric Switches through: http://www.amazon.com For additional Brocade documentation, visit the Brocade SAN Info Center and click the Resource - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 15
over all levels of fabric access and communication. FICON® CUP Enables IBM host-based management programs to manage FICON fabric switches in-band by sending commands to the Fabric OS emulated control device. FCIP Support The FCIP Tunneling Service is an optional feature that enables you to use the - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 16
guides, including the SAN Security Best Practice Guide, white papers, online demos, data sheets, and other documentation is available through the Brocade .org Getting Technical Help Contact your switch supplier for hardware, firmware, and software support, including product repairs and part ordering - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 17
located inside the chassis on the port side on the left - Brocade 5000-On the switch ID pull-out tab located on the bottom of the port side of the switch - Brocade 7600-On the bottom of the chassis - Brocade 48000 and Brocade DCX-Inside the chassis next to the power supply bays. 3. World Wide Name - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 18
xviii Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 19
enterprise-level management process. Every Brocade switch and director supports SNMP. This chapter discusses the following: • Setting the SNMP Security Level 1 • Understanding SNMP Basics 2 • Loading Brocade MIBs 6 • Brocade 7500 / FR4-18i and Brocade MIBs 9 • Firmware Upgrades and Enabled Traps - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 20
privilege are allowed. Not allowed. Traps Not Sent. Sent only for authPriv users. Not Sent. Understanding SNMP Basics Every Brocade switch carries an agent and management information base (MIB), as shown in Figure 1. The agent accesses information about a device and makes it available to an SNMP - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 21
base (MIB) is a database of monitored and managed information on a device, in this case a Brocade switch describe object names, while integers allow software to create compact, encoded representations of standards are: • FibreAlliance (FA) MIB: Brocade supports version 3.0. • Fabric Element (FE) MIB - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 22
Fibre Alliance MIB (FA-MIB), this MIB manages SAN switches and devices from any company that complies with Fibre Alliance specifications. • Brocade-specific MIB trap - Associated with the Brocade-specific Brocade MIB (SW-MIB), manages Brocade switches only. There is some overlap in the functionality - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 23
command. SW Traps There are six specific traps defined in Brocade SW-TRAP: 1. swfault (no longer supported) 2. swSensorScn (no longer supported) 3. swFCPortScn This trap is generated by a port state change. 4. swEventTrap This trap is generated by any switch event reported to the system error log - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 24
number in SNMP because SNMP numbering starts at 1; switch port numbering starts at 0. Loading Brocade MIBs The Brocade MIB is a set of variables that are private extensions to the Internet standard MIB-II. The Brocade agents support many other Internet-standard MIBs. These standard MIBs are - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 25
supported. MIB LOADING ORDER Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS section near the top of the MIB. When loading the Brocade 5.x BRCD_v5_0.mib Brocade-REG-MIB Brocade-TC FOS 2.6.x, 3.x, 4.x, 5.x snmpUsmMIB User-based Security Model FOS - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 26
organizations.| All versions of Fabric OS support SNMPv1. Fabric v2.6.x and v3.2.x partially support SNMPv2. Fabric OS v4.4.0 and v5.0.1 support SNMPv3-USM (snmpUsmMIB) MIB. Fabric OS version 5.3.0 supports the FCIP MIB and ifXtable. FIGURE 5 Brocade SNMP MIB Dependencies and Advised Installation - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 27
specific to fabric switches. The connUnitSnsTable is not supported because a switch in Access Gateway does support name server services. Disabled in Access Gateway because the conventions are specific to fabric switches. Supported on embedded switches only. Implemented to support WAN interfaces in - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 28
to provide service providers with a means to assign portions of a fabric to individual consumers. An AD may contain switches, devices, and ports. An AD may also limit access to a configured set of users. Support for Role Based Access Control Role Based Access Control (RBAC) is supported in Fabric - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 29
18 • Interfaces Group 20 • AT Group 24 • IP Group 25 • ICMP Group 32 • TCP Group 36 • UDP Group 39 • EGP Group 40 • Transmission Group 40 The notes that follow the descriptions refer to Brocade-specific information and are provided by Brocade. MIB-II Object Hierarchy Figure 6 through Figure - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 30
2 MIB-II Object Hierarchy FIGURE 6 - snmp - iFMIB MIB-II Overall Hierarchy - system (1.3.6.1.2.1.1) - sysDescr 1.3.6.1.2.1.1.1 - sysObjectID 1.3.6.1.2.1.1.2 - sysUpTime 1.3.6.1.2.1.1.3 - sysContact 1.3.6.1.2.1.1.4 - sysName 1.3.6.1.2.1.1.5 - sysLocation 1.3.6.1.2.1.1.6 - sysServices - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 31
12 - ifInDiscards 1.3.6.1.2.1.2.2.1.13 - ifInErrors 1.3.6.1.2.1.2.2.1.14 - ifInUnknownProtos 1.3.6.1.2.1.2.2.1.15 - ifOutOctets 1.3.6.1.2.1.2.2.1.16 - ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 - ifOutNUcastPkts 1.3.6.1.2.1.2.2.1.18 - ifOutDiscards 1.3.6.1.2.1.2.2.1.19 - ifOutErrors 1.3.6.1.2.1.2.2.1.20 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 32
- ipOutNoRoutes 1.3.6.1.2.1.4.12 - ipReasmTimeout 1.3.6.1.2.1.4.13 - ipReasmReqds 1.3.6.1.2.1.4.14 - ipReasmOKs 1.3.6.1.2.1.4.15 - ipReasmFails 1.3.6.1.2.1.4.16 - ipFragOKs 1.3.6.1.2.1.4.17 - ipFragFails 1.3.6.1.2.1.4.18 - ipFragCreates 1.3.6.1.2.1.4.19 - ipAddrTable 1.3.6.1.2.1.4.20 - ipAddrEntry - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 33
12 - icmpInAddrMaskReps 1.3.6.1.2.1.5.13 - icmpOutMsgs 1.3.6.1.2.1.5.14 - icmpOutErrors 1.3.6.1.2.1.5.15 - icmpOutDestUnreachs 1.3.6.1.2.1.5.16 - icmpOutTimeExcds 1.3.6.1.2.1.5.17 - icmpOutParmProbs 1.3.6.1.2.1.5.18 - icmpOutSrcQuenchs 1.3.6.1.2.1.5.19 - icmpOutRedirects 1.3.6.1.2.1.5.20 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 34
- udpNoPorts 1.3.6.1.2.1.7.2 - udpInErrors 1.3.6.1.2.1.7.3 - udpOutDatagrams 1.3.6.1.2.1.7.4 - udpTable 1.3.6.1.2.1.7.5 - udpEntry 1.3.6.1.2.1.7.5.1 - udpLocalAddress 1.3.6.1.2.1.7.5.1.1 - udpLocalPort 1.3.6.1.2.1.7.5.1.2 FIGURE 13 udp Hierarchy 16 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 35
11.12 - snmpInTotalReqVars 1.3.6.1.2.1.11.13 - snmpInTotalSetVars 1.3.6.1.2.1.11.14 - snmpInGetRequests 1.3.6.1.2.1.11.15 - snmpInGetNexts 1.3.6.1.2.1.11.16 - snmpInSetRequests 1.3.6.1.2.1.11.17 - snmpInGetResponses 1.3.6.1.2.1.11.18 - snmpInTraps 1.3.6.1.2.1.11.19 - snmpOutTooBigs 1.3.6.1.2.1.11.20 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 36
is returned. sysDescr 1.3.6.1.2.1.1.1 A textual description of the entity. This value should include the full name and version identification of the hardware type, software operating system, and networking software. Format This must contain only printable ASCII characters. Set command Set this value - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 37
either: • Fibre Channel Switches: iso.org.dod.internet.private.enterprises.bcsi.commDev.fibrechannel.fcSwitch.sw • Brocade Access Gateway: iso.org. together with information on how to contact this person. Field Support Set this value using the snmpconfig command. sysName 1.3.6.1.2.1.1.5 Default - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 38
support is added in Fabric OS 5.3.0 and higher. To support FCIP tunneling, entries are created in the ifTable for each WAN interface (GbE port), each FC port dynamic for the Brocade DCX director and depends on the number of GbE ports, FC ports, transport interfaces. All non-bladed systems will have - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 39
. The ifDescr for non-bladed switches includes: lo, eth0, and fc0. The ifDescr for Brocade 12000, 24000, and 48000 directors includes: lo, eth0, For interfaces that are used to transmit network datagrams, the value is the size of the largest network datagram that can be sent on the interface (these - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 40
total number of octets received on the interface, including framing characters. ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 The number of subnetwork-unicast packets delivered to a higher-layer protocol. Not supported. 22 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 41
packets received by way of the interface that were discarded because of an unknown or unsupported protocol. Not supported. ifOutOctets 1.3.6.1.2.1.2.2.1.16 The total number of octets transmitted out of the interface, including framing characters. ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 The total number - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 42
that could not be transmitted because of errors. ifOutQLen 1.3.6.1.2.1.2.2.1.21 The length of the output packet queue (in packets). Not supported. ifSpecific 1.3.6.1.2.1.2.2.1.22 Returns A reference to MIB definitions specific to the particular media being used to realize the interface. If the - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 43
atEntry 1.3.6.1.2.1.3.1.1 2 The Address Translation tables contain the network address to physical address equivalences. Some interfaces do not use translation tables for determining address equivalences (for example, DDN-X.25 has an algorithmic method); if all interfaces are of this type, then - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 44
successfully but discarded because of an unknown or unsupported protocol. ipInDiscards 1.3.6.1.2.1.4.8 The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (for example, for lack of buffer space). This counter - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 45
The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, 1.3.6.1.2.1.4.15 The number of IP datagrams successfully reassembled. ipReasmFails 1.3.6.1.2.1.4.16 The number of failures detected by the IP reassembly algorithm (for - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 46
2 ipFragFails 1.3.6.1.2.1.4.18 ipFragFails 1.3.6.1.2.1.4.18 The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be (for example, because their Don't Fragment flag was set). ipFragCreates 1.3.6.1.2.1.4.19 The number of IP datagram - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 47
ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5 2 ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5 The size of the largest IP datagram that this entity can reassemble from incoming IP fragmented datagrams received on this interface. ipRouteTable 1.3.6.1.2.1.4.21 The IP routing table - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 48
mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. ipRouteAge 1.3.6.1.2.1.4.21.1.10 The number of seconds since this route was last updated or otherwise determined to be correct. 30 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 49
be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 50
. icmpInErrors 1.3.6.1.2.1.5.2 The number of ICMP messages that the entity received but determined to have ICMP-specific errors (bad ICMP checksums, bad length, and so on). 32 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 51
icmpInTimeExcds 1.3.6.1.2.1.5.4 The number of ICMP Time Exceeded messages received. icmpInParmProbs 1.3.6.1.2.1.5.5 The number of ICMP Parameter Problem messages received. icmpInSrcQuenchs 1.3.6.1.2.1.5.6 The number of ICMP Source Quench messages received. icmpInRedirects 1.3.6.1.2.1.5.7 The number - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 52
The number of ICMP messages that this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should error that contribute to this counter's value. icmpOutDestUnreachs 1.3.6.1.2.1.5.16 The number of ICMP Destination Unreachable messages sent. icmpOutTimeExcds - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 53
icmpOutTimestamps 1.3.6.1.2.1.5.23 2 icmpOutTimestamps 1.3.6.1.2.1.5.23 The number of ICMP Timestamp (request) messages sent. icmpOutTimestampReps 1.3.6.1.2.1.5.24 The number of ICMP Timestamp Reply messages sent. icmpOutAddrMasks 1.3.6.1.2.1.5.25 The number of ICMP Address Mask Request messages - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 54
of the UBOUND quantity described in RFC 793. tcpMaxConn 1.3.6.1.2.1.6.4 The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1. tcpActiveOpens 1.3.6.1.2.1.6.5 The number of times - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 55
tcpAttemptFails 1.3.6.1.2.1.6.7 2 tcpAttemptFails 1.3.6.1.2.1.6.7 The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 56
to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used. tcpConnLocalPort 1.3.6.1.2.1.6.13.1.3 The local port number for this TCP connection. tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4 The remote IP address for this TCP connection. 38 Fabric OS MIB Reference - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 57
delivered to UDP users. udpNoPorts 1.3.6.1.2.1.7.2 The total number of received UDP datagrams for which there was no application at the destination port. udpInErrors 1.3.6.1.2.1.7.3 The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 58
datagrams for any IP interface associated with the node, the value 0.0.0.0 is used. udpLocalPort 1.3.6.1.2.1.7.5.1.2 The local port number for this UDP listener. EGP Group Brocade does not support the EGP Group. This section is not applicable. Refer to the RFC1213 for complete information regarding - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 59
.6 The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP messages. NOTE 1.3.6.1.2.1.11.7 is not supported. snmpInTooBigs 1.3.6.1.2.1.11.8 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 60
Mandatory The total number of SNMP Get-Request PDUs that have been accepted and processed by the SNMP protocol entity. snmpInGetNexts 1.3.6.1.2.1.11.16 The total number of SNMP Get-Next PDUs that have been accepted and processed by the SNMP protocol entity. snmpInSetRequests 1.3.6.1.2.1.11.17 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 61
were generated by the SNMP protocol entity and for which the value of the error-status field is "badValue." NOTE 1.3.6.1.2.1.11.23 is not supported. snmpOutGenErrs 1.3.6.1.2.1.11.24 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 62
FCIP tunnels. There are entries in the ifXTable for each WAN interface (GbE port), each FC port, and each FCIP tunnel (transport interface). The ifXtable is used to support 64 bit FC statistics counters. ifXTable 1.3.6.1.2.1.31.1.1 A list of interface entries. The number of entries is given by - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 63
at other times as indicated by the value of ifCounterDiscontinuityTime. Not supported. ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 The number of packets, delivered by this on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 64
times as indicated by the value of ifCounterDiscontinuityTime. Not supported. ifHCInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.9 The number of packets, delivered by those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 65
ifCounterDiscontinuityTime Not supported. ifHCOutBroadcastPkts sent. This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities Gbps, the value 2000, etc. ifPromiscuousMode 1.3.6.1.2.1.31.1.1.1.16 This object has a value of false(2) if this ports, it is always false. Fabric OS MIB - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 66
much storage is already occupied by the current values for other interfaces." Not supported. ifCounterDiscontinuityTime 1.3.6.1.2.1.31.1.1.1.17 The value of sysUpTime on the most recent occasion at , then this object contains a zero value. Not supported. 48 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 67
information: • FE MIB Overview 49 • FIBRE-CHANNEL-FE-MIB (MIB-II branch 49 • FCFABRIC-ELEMENT-MIB (Experimental Branch) . . . 73 FE MIB Overview Brocade supports two versions of the FE MIB: • FIBRE-CHANNEL-FE-MIB (RFC2837) in the MIB-II branch. • FCFABRIC-ELEMENT-MIB in the experimental branch - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 68
from the FIBRE-CHANNEL-FE-MIB itself. The notes that follows the descriptions typically pertain to Brocade-specific information and are provided by Brocade. NOTE Brocade does not support the settable "Write" function for any of the Fibre Channel FE MIB objects except fcFxPortPhyAdminStatus. The - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 69
FIBRE-CHANNEL-FE-MIB Organization 3 - fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 - fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4 - fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5 - fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 - fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 - fcFxPortEdtov 1.3.6.1.2.1.75 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 70
3 FIBRE-CHANNEL-FE-MIB Organization FIGURE 18 fcFeConfig Hierarchy - fcFeStatus - fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 - fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 - fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 - fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 - fcFxPortOperMode 1.3.6.1.2.1.75 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 71
FIBRE-CHANNEL-FE-MIB Organization 3 - fcFeAccounting - fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 - fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 - fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 - fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 - fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 - - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 72
The name identifier associated with a port. Valid formats include: IEEE 48 IEEE extended Local A 24-bit value unique within the address space of a fabric. Receive data field size of an Nx_Port or Fx_Port. Buffer-to-buffer credit of an Nx_Port or Fx_Port. Version of FC-PH supported by an Nx_Port or - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 73
FcFeModuleCapacity Integer Integer Integer from 1 to 256 Description 1 (other) None of below 2 (one-eighth) 155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.0 MB/s) 16 (full) 1 Gbaud (100 MB/s) 32 (double) 2 Gbaud (200 MB/s) 64 (quadruple) 4 Gbaud (400 MB/s) bit - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 74
16. For the Brocade 3900 and 4100, this value is 32. For the Brocade 4900, this value is 64. For the Brocade 5000, this value is 32 For the Brocade 12000, this value is 128. For the Brocade 24000, this value is 128. For the Brocade 48000, this value is 256. For the Brocade to support its switch - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 75
Value The valid value for all Brocade switches is 1. fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 A of the module. This value should include the full name and version identification of the module. It identifier 1.3.6.1.4.1.99649.3.9 to its "FeFiFo-16 PlugInCard." See "sysObjectID 1.3.6.1.2.1.1.2" on - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 76
5000 Brocade 7500 Brocade 7600 Brocade 12000 / 24000 Brocade 48000 Brocade DCX 8 ports 12 ports 16 ports 32 ports 50 ports 32 ports 16 ports 16 ports 128 ports 256 ports 384 ports fcFeModuleName 1.3.6.1.2.1.75.1.1.4.1.7 Return The Name_Identifier of the module. Displays the WWN of the switch - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 77
port. fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 The highest or most recent version of FC-PH that the Fx_Port is configured to support. This value is always 32 applicable) to Fx_Port. fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 The largest Data_Field Size (in octets) for an FT_1 frame that can - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 78
1.3.6.1.2.1.75.1.1.5.1.9 A value indicating the set of Classes of Service supported by the Fx_Port. fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection. 1 - true 2- false fcFxPortStackedConnMode 1.3.6.1.2.1.75 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 79
Nx_Port(s) during fabric login. fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. fcFxPortOperMode 1.3.6.1.2.1.75 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 80
3 fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 An entry containing physical level status and parameters of an Fx_Port. fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 The desired state of the Fx_Port. A management station might place the Fx_Port in a desired - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 81
table contains one entry for each Fx_Port in the fabric element and the service parameters that have been established from the most recent fabric login, whether version of FC-PH that the Fx_Port has agreed to support from the fabric login. fcFxPortNxPortBbCredit 1.3.6.1.2.1.75.1.2.3.1.3 The total - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 82
Data Field Size for an FT_1 frame that can be received by the Nx_Port. The value is a number of bytes in the range 128 to 2112, inclusive. fcFxPortCosSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.5 Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of services and the - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 83
since the management agent reinitialized, one entry for each Fx_Port in the fabric element. The first six columnar objects after the port index correspond to the counters in the link error status block. fcFxPortErrorEntry 1.3.6.1.2.1.75.1.3.1.1 Augments An entry containing error counters of - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 84
3 fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3 fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3 The number of loss of signal errors detected by the Fx_Port. fcFxPortPrimSeqProtoErrors 1.3.6.1.2.1.75.1.3.1.1.4 The number of primitive sequence protocol errors detected by the Fx_Port. fcFxPortInvalidTxWords - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 85
feFcAccounting Group 3 feFcAccounting Group The Accounting group is supported only in Fabric OS v4.x. The Accounting group consists of the following tables: • Class 1 accounting table • Class 2 accounting table • Class 3 accounting table Each table contains - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 86
3 fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 The number of F_BSY frames generated by this Fx_Port against Class 1 connect-request. fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 The number of F_RJT frames generated by this Fx_Port against Class 1 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 87
fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 3 fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 The number of Class 2 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port. fcFxPortC2OutOctets 1.3.6.1.2.1.75.1.4.2.1.4 The number of Class 2 frame octets, - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 88
table describing information about what each Fx_Port is inherently capable of operating or supporting. A capability might be used, as expressed in its respective object 1.3.6.1.2.1.75.1.5.1 A table that contains the capabilities of the port within the fabric element, one entry for each Fx_Port. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 89
receiving from its attached Nx_Port. fcFxPortCapRxDataFieldSizeMin 1.3.6.1.2.1.75.1.5.1.1.6 The minimum size (in bytes) of the data field in a frame This flag is only valid if the port is capable of supporting Class 1 service. fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.9 A value indicating - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 90
1.3.6.1.2.1.75.1.5.1.1.12 fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12 The maximum holding time (in microseconds) that the Fx_Port is capable of supporting. fcFxPortCapHoldTimeMin 1.3.6.1.2.1.75.1.5.1.1.13 The minimum holding time (in microseconds) that the Fx_Port is capable of - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 91
-ELEMENT-MIB 77 • fcFeConfig Group 79 • fcFeOp Group 85 • fcFeError Group 90 • fcFeAcct Group 92 • fcFeCap Group 92 NOTE Brocade does not support the settable "Write" function for any of the Fibre Channel FE MIB objects except "fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1". Fabric OS MIB - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 92
3 FCFABRIC-ELEMENT-MIB Organization FIGURE 23 - fcFxPortOperTable - fcFxPortPhysTable - fcFxlogiTable - fcFeError - fcFxPortErrorTable - fcFeAcct - fcFxPortC1AcctTable - fcFxPortC2AcctTable - fcFxPortC3AcctTable - fcFeCap - fcFxPortCapTable FCFABRIC-ELEMENT-MIB Overall Tree Structure 74 Fabric - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 93
42.2.1.1.5.1.13 - fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.14 - fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15 - fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16 - fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.17 - fcFxPortTxType 1.3.6.1.3.42.2.1.1.5.1.18 - fcFxPortDistance 1.3.6.1.3.42.2.1.1.5.1.19 FIGURE - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 94
3 FCFABRIC-ELEMENT-MIB Organization - fcFeOp - fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 - fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 - fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 - fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 - fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 - fcFPortAttachedPortName - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 95
fcFeAcct (-- Not Supported --) FIGURE 27 16 Type Definition Value Display string Octet string of size 0 to 255 Milliseconds Microseconds FcNameId Integer from values: 0 (Ignored) 1 (IEEE 48-bit address) 2 (IEEE extended) 3 (Locally assigned) 4 (32-bit IP address) Fabric OS MIB Reference - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 96
identifier associated with a port. Only the following formats . Receive Data_Field size. Buffer-to-buffer credit. Represents the version of FC-PH supported by an NxPort 8 (half) 532 Mbaud (50.0 MB/s) 16 (full) 1 Gbaud (100 MB/s) 32 (double) 2 Gbaud (200 MB/s) 64 (quadruple) 4 Gbaud (400 MB/s) bit 0 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 97
16 (tv) 32 (mi) 64 (stp) 128 (tw) 256 (lv) 1 (unknown) 2 (longWaveLaser (LL)) 3 (shortWaveLaser (SL)) 4 (longWaveLED (LE)) 5 (electrical (EL)) 6 (shortWaveLaser-noOFC (SN)) The FC-0 distance range associated with a port contains the configuration and service parameters of the fabric to support its - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 98
. The Brocade 12000, 24000, and 48000 directors do not support this MIB variable. The Value for fcFeModuleCapacity is always 1 for all the supported switches. fc Fabric textual description of the module. This value should include the full name and version identification of the module. It should - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 99
its 'FeFiFo-16 PlugInCard.' See switch. Fx_Port Configuration Table This table contains, one entry for each Fx_Port, the configuration parameters of the ports . fcFxConfTable 1.3.6.1.3.42.2.1.1.5 A table that contains, one entry for each Fx_Port in the fabric element, configuration and service - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 100
and service parameters port. fcFxPortFcphVersionHigh 1.3.6.1.3.42.2.1.1.5.1.4 The highest or most recent version of FC-PH that the Fx_Port is configured to support applicable) to Fx_Port. fcFxPortRxBufSize 1.3.6.1.3.42.2.1.1.5.1.7 The largest Data_Field Size (in octets) for an FT_1 frame that can be - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 101
an error condition. fcFxPortCosSupported 1.3.6.1.3.42.2.1.1.5.1.10 Values A value indicating the set of Classes of Service supported by the Fx_Port. Possible values are: • Class F (0) • Class 1 (1) • Class 2 (2) • Clas 3 (3) • Class 4 (4) • Class 5 (5) • Class 6 (6) fcFxPortIntermixSupported - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 102
frame. The value 0 means that the Fx_Port does not support this parameter. fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16 The FC-0 baud rate of the Fx_Port. The Brocade 12000, 24000, 48000 , and DCX directors do not support this MIB variable. fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.17 The FC-0 medium - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 103
group consists of tables that contain operational status and established service parameters for the fabric element and the attached Nx_Ports. attached Nx_Port(s) during fabric login. fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 The port name of the attached N_Port, if applicable. If the value - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 104
might be implemented for backward compatibility. fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. fcFxPortOperMode - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 105
Login might proceed. • offline (2) Login cannot proceed. • testing (3) Port is under test. • link-failure (4) Failure after online/testing. The contains one entry for each Fx_Port in the fabric element, and the Service Parameters that have been established from the most recent fabric login, whether - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 106
.2.1.2.4.1 An entry containing service parameters established from a FC-PH that the Fx_Port has agreed to support from the fabric login. fcFxPortNxPortBbCredit 1.3.6.1.3.42.2.1.2.4.1.5 The Data Field Size of the attached Nx_Port. This is a binary value that specifies the largest Data Field Size for - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 107
flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Possible values are: • yes (1) • no (2) fcFxPortNxPortName 1.3.6.1.3.42.2.1.2.4.1.12 The port name of the attached Nx_Port, if - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 108
element, and counters recording numbers of errors detected since the management agent reinitialized. The first six columnar objects after the port index correspond to the counters in the Link ErrorStatus Block. fcFxPortErrorEntry 1.3.6.1.3.42.2.1.3.1.1 Index An entry containing error counters of - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 109
fcFxPortLinkFailures 1.3.6.1.3.42.2.1.3.1.1.3 3 fcFxPortLinkFailures 1.3.6.1.3.42.2.1.3.1.1.3 The number of link failures detected by this Fx_Port. fcFxPortSyncLosses 1.3.6.1.3.42.2.1.3.1.1.4 The number of loss of synchronization errors detected by the Fx_Port. fcFxPortSigLosses 1.3.6.1.3.42 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 110
of Offline Sequence errors issued by this Fx_Port. fcFeAcct Group Brocade does not support Accounting tables; this section is not applicable. fcFeCap Group entry for each Fx_Port, and the capabilities of the port within the fabric element. fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 Index An entry - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 111
of receiving from its attached Nx_Port. fcFxPortCapRxDataFieldSizeMin 1.3.6.1.3.42.2.1.5.1.1.8 The minimum size (in bytes) of the Data Field in a frame that the 1 connection. This flag is only valid if the port is capable of supporting Class 1 service. Values Possible values are: • yes (1) • no - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 112
minimum holding time (in microseconds) that the Fx_Port is capable of supporting. fcFxPortCapBaudRates 1.3.6.1.3.42.2.1.5.1.1.16 A value indicating the set of baud rates that the Fx_Port is capable of supporting. This variable has been deprecated and might be implemented for backward compatibility - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 113
by a single SNMP agent. This MIB is supported only in Fabric OS v4.x, v5.x, and v6.0. The descriptions of each of the MIB variables in this chapter come directly from Entity MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific information and are provided by - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 114
47.1.1.1.1.13 - entPhysicalAlias 1.3.6.1.2.1.47.1.1.1.1.14 - entPhysicalAssetID 1.3.6.1.2.1.47.1.1.1.1.15 - entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16 FIGURE 30 entityPhysical Hierarchy - entityLogical - entLogicalTable 1.3.6.1.2.1.47.1.2.1 - entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1 - entLogicalIndex - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 115
1.3.6.1.2.1.47.1.3.2.1.2 - entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 - entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 - entPhysicalChildIndex 1.3.6.1.2.1.47.1.3.3.1.1 FIGURE 32 entityMapping Hierarchy - entityGeneral - entLastChangeTime 1.3.6.1.2.1.47.1.4.1 FIGURE 33 entityGeneral Hierarchy - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 116
The physical entity class is known but does not match any of the supported values. The physical entity class is unknown to the agent. The physical forwarding networking traffic, such as a shared backplane in a modular Ethernet switch. Note that an agent might model a backplane as a single physical - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 117
(empty or full) slot in a power-supplying supported). • For the Brocade 3016 or Brocade 4020 blades port number along with the private enterprise number and algorithm type used. An example of this type of snmpEngineID would be 00.00.06.34.00.00.00.A1.0A.20.93.CA (hex) OCTET STRING (SIZE(0..32 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 118
4 Entity MIB Objects Entity MIB Objects The Entity MIB objects are divided into the following groups: • Physical Entity Group 100 • Logical Entity Group 108 • Entity Mapping Group 111 • General Group 113 The following sections list the MIBs in each group. Physical Entity Group entPhysicalTable - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 119
for Brocade Switches Blades Fans Brocade 200E 1 3 fans not a FRU Brocade 3016 1 NA Power Supply 1 PS not a FRU NA Brocade 3250 1 3 fans 1 PS not a FRU not a FRU Brocade 3850 1 4 fans 2 PS not a FRU not a FRU Brocade 3900 1 6 fans in 3 FRUs 2 PS Brocade 4012 Brocade 4100 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 120
physical entity (physical name of the entity, such as chassis, blade, port, and so on). This object should contain a string that identifies the textual description of the type of the entry (for example, power supply, module, and so on). entPhysicalVendorType 1.3.6.1.2.1.47.1.1.1.1.3 An indication - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 121
: One entry for each FRU slot (eight port blades, two CPs, four power supplies, three fans) Module: Eight entries for port blades, two entries for CPs, four entries for power supplies, and three entries for fans. Brocade 12000, 24000, and 48000 directors can have the following hierarchy of physical - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 122
switch blade, two power supplies, three fans) - Module: 1 entry for switch blade, up to two entries for power supplies, and up to three entries for fans. Brocade 7500 and 7600 switches to a given set of sibling components, perhaps based on internal representation of the components. If the agent - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 123
the physical entity (physical name of the entity such as chassis, blade, port, and so on). The value of this object should be the name the textual description of the type of the entry (for example, power supply, module, and so on) entPhysicalHardwareRev 1.3.6.1.2.1.47.1.1.1.1.8 The vendor-specific - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 124
implementation-specific manner. If no specific firmware programs are associated with the physical component implementation-specific manner. If no specific software programs are associated with the physical component "false(2)" (for example, the repeater ports within a repeater module), do not need - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 125
4 Set to serial number and part number (if available), respectively. NOTE For the Brocade 4024 blade, entPhysicalSerialNum displays the vendor-specific serial number; for other switches it displays the factory serial number. entPhysicalMfgName 1.3.6.1.2.1.47.1.1.1.1.12 The name of the manufacturer - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 126
-length string. Set to empty string. entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16 The entPhysicalIsFRU object indicates whether this physical entity is considered this object. Set to True (1) for FRU entries (port blades, CPs, sensors, power supplies, and fans; False (2) for container and chassis type - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 127
hierarchy that represents the major MIB module, or the majority of the MIB modules, supported by the logical entity. • a logical entity of a regular host/router -> mib of all managed objects) and might also return a community string based on the privileges of the request used to read this object. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 128
(for example, tri-lingual agent support). entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5 The transport service address by which the logical entity the IP-address in network-byte order and the last 2 containing the UDP port in network-byte order. Refer to Transport Mappings for Version 2 of the Simple - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 129
and the power supply are not useful and should not be included. Also, only the most appropriate physical component that is closest to the root of a particular containment tree should be identified in an entLPMapping entry. Suppose a bridge is realized on a particular module and all ports on that - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 130
on page 112 for details.) Note that only entPhysicalIndex values that represent physical ports (that is, associated entPhysicalClass value is "port(10)") are permitted to exist in this table. entPhysicalIndex entAliasLogicalIndexOrZero entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 The - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 131
1.3.6.1.2.1.47.1.3.3 4 For example, suppose a physical port was represented by entPhysicalEntry.3, entLogicalEntry.15 existed for other mappings (besides interfaces and repeater ports) might be defined in the future, as required. Bridge ports are identified by examining the Bridge - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 132
4 Entity MIB Trap Entity MIB Trap This section lists the entityMIBTrap objects. entConfigChange 1.3.6.1.2.1.47.2.0.1 An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 133
. Note that the entAliasMappingTable may be useful for all agents, however implementation of the entityLogicalGroup or entityLogical2Group is required to support this table. 3. Type: Object Object: entPhysicalSerialNum Min access: not-accessible Description: Read and write access is not required for - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 134
of objects used to represent the associations between multiple logical entities, physical components, interfaces, and port identifiers, for which a single agent provides management information. Objects 1: entLPPhysicalIndex 2: entAliasMappingIdentifier 3: entPhysicalChildIndex entityGeneralGroup - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 135
entityLogical2Group 1.3.6.1.2.1.47.3.2.7 4 3: entPhysicalSoftwareRev 4: entPhysicalSerialNum 5: entPhysicalMfgName 6: entPhysicalModelName 7: entPhysicalAlias 8: entPhysicalAssetID 9: entPhysicalIsFRU entityLogical2Group 1.3.6.1.2.1.47.3.2.7 Objects The collection of objects used to represent - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 136
4 entityLogical2Group 1.3.6.1.2.1.47.3.2.7 118 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 137
Fibre Channel Port Group 150 • Name Server Database Group 156 • Event Group 159 • Fabric Watch Group 161 • End Device Group 169 • Switch Group 170 from the FC Switch MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. SW-MIB - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 138
5 SW MIB Overview FIGURE 37 - swAgtCfg - swFCport - swNs - swEvent - swFwSystem - swEndDevice - swGroup - swBlmPerfMnt - swTrunk - sw28k - sw21kN24k - sw20x0 - bsciReg - bsciModules - sw21kN24k - sw20x0 SW-MIB Overall Tree Structure - swTrapsV2 - swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 - swSensorScn - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 139
13 - swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 - swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 - swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 - swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18 - swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 - swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 140
5 SW MIB Overview - swFabric - swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 - swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 - swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 - swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.9 - swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.9.1 - swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.1 - - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 141
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 - swFCPortRxC3Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 - swFCPortRxLCs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 - 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 - swFCPortLipOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 - swFCPortLipLastAlpa 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 - swFCPortWwn - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 142
5 SW MIB Overview - swNs - swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 - swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 - swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 - swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 - swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 - swNsPortType 1.3.6.1.4.1.1588 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 143
1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 - swFwDefaultChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15 - swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 - swFwDefaultBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17 - swFwDefaultAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.18 - swFwDefaultInBetweenActs - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 144
.2.1 - swGroupID 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.1 - swGroupMemWwn 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.2 - swGroupMemPos 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.3 FIGURE 48 swGroup Hierarchy - swBlmPerfMnt - swBlmPerfALPAMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.1 - swBlmPerfALPAMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 145
SW MIB Overview 5 - swTrunk - swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 - swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 - swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 - swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 - swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 - swTrunkMaster - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 146
String of size 8 Integer of size 1 to 239 Integer of size 1 to 2048 Integer of size 1 to 1024 Integer32 SwTrunkMaster Integer32 SwFwActs Integer SwFwLevels Integer Description The World Wide Name (WWN) of Brocade-specific products and ports. Fibre Channel domain ID of the switch. Index of - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 147
13 swFwPortCrcs 14 swFwPortRXPerf 15 swFwPortTXPerf 16 swFwPortState 17 swFwFabricEd 18 swFwFabricFr 19 swFwEPortWords 30 swFwEPortCrcs 31 swFwEPortRXPerf 32 swFwEPortTXPerf 33 swFwEPortState 34 swFwFCUPortLink 46 swFwFOPPortPe 47 swFwFOPPortWords 48 swFwFOPPortCrcs 49 swFwFOPPortRXPerf 64 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 148
page 131 (not supported) "swSensorScn 2 1.3.6.1.4.1.1588.2.1.1.1.0.2" on page 132 "swFCPortScn 3 1.3.6.1.4.1.1588.2.1.1.1.0.3" on page 132 "swEventTrap 4 1.3.6.1.4.1.1588.2.1.1.1.0.4" on page 133 When During boot, if diagnostics fail Obsolete Port changes state Switch event Configure - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 149
in v2.6.x. The swGroupName, swGroupType, and swGroupMemPos variables are not supported in Fabric OS v4.x and above. Because FOS releases prior to whenever the diagnostics detect a fault with the switch. #TYPE #SUMMARY #ARGUMENTS #SEVERITY #TIMEINDEX #STATE Switch is faulty. Faulty reason: %d and - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 150
FC_Port's operational status, index, swFCPortName, and swSsn. swFCPortName and swSsn are optional. #TYPE #SUMMARY #ARGUMENTS A Fibre Channel Port changed its operational state. Port Index %d changed state to %d. Port Name: %s and SSN is #%s 1, 0, 2, 3 132 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 151
event occurs with a level that is at or below "swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1". #TYPE #SUMMARY #ARGUMENTS #SEVERITY #TIMEINDEX #STATE A firmware event has been logged. Event %d: %s (severity level %d) - %s SSN is #%s 0, 1, 2, 4, 5 Informational 1 Operational Each Trap recipient has - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 152
event %d with %d on %s. This event is %d and SSN is #%s 2, 0, 1, 6, 4, 5, 7, 8 Warning 1 Operational See the Fabric Watch Administrator's Guide for information on setting thresholds in Fabric Watch. Sample trap output for Fabric OS 4.4.0: swFwClassAreaIndex.1 = swFwEnvTemp(1) swFwThresholdIndex - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 153
is #%s 0, 1 Informational 1 Operational Some of the triggers that will generate this trap are: • Logout • Unsuccessful login • Successful login • Switch configuration changes • Track changes on and off Sample trap output for Fabric OS 4.4.0: swTrackChangesInfo.0 = Logout swSsn.0 = none This trap - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 154
hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 The date and time when the system last booted. The return string displays using the following format: ddd MMM DD hh - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 155
1.3.6.1.4.1.1588.2.1.1.1.1.3 The date and time when the firmware was last loaded to the switch. The return string displays using the following Thu Aug 17 15:16:09 2000 swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 The date and time when the firmware was last downloaded or the configuration file - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 156
= minor version f = software maintenance version For example, v6.0.0_main_bld36 described firmware version 6.0.0 and the specific switch. Possible values are: • online (1) The switch is accessible by an external Fibre Channel port. • offline (2) The switch is not accessible. • testing (3) The switch - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 157
the POST. • switchReboot (7) Set the current switch to reboot in 1 second. When the switch is in faulty state, only two states can be set: faulty and reboot/fastboot/switchReboot. For the Brocade 3250, 3850, 3900, 24000, 48000 and DCX director the testing (3), faulty (4) values are not applicable - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 158
is not supported in FOS v6.0.0. Possible values are: • swCurrent (1) The flash contains the current firmware image or configuration file. • swCfUpload (3) The switch configuration file is to be uploaded to the host specified. • swCfDownload (4) The switch configuration file is to be downloaded from - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 159
above. The value displayed is always NULL (zero-length).This is not supported in FOS v6.0.0. swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 The password to be used for FTP transfer of files in the download or upload operation. This OID cannot be used for either firmwareDownload or configDownload - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 160
1588.2.1.1.1.1.21 swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 The number of sensors inside the switch. The Brocade DCX value is between 1 and 57 (temperature =50, fan = 3, power supply = 4). The value might vary depending on the switch model. For Fabric OS v6.0.0, if no sensor is available, this - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 161
fan value is in RPM (revolutions per minute), and the power supply sensor reading is unknown. The unknown value -2147483648 indicates example: SLOT #0: TEMP #3 FAN #1 Power Supply #1 Return values for the Brocade 12000, 24000, and 48000 directors depend upon the configuration of your system. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 162
Track-changes on • Track-changes off swID 1.3.6.1.4.1.1588.2.1.1.1.1.24 Not supported in Fabric OS v3.2.0. The number of the logical switch (either 0 or 1). swEtherIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.25 Not supported in Fabric OS v3.2.0. Supported in Fabric OS v6.0.0 The IP address of the Ethernet - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 163
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.2 This is the port that has an ISL to another switch. This value is the same as the physical port number of the local switch +1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1. Fabric OS MIB Reference - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 164
Mbaud. • half (8) 532 Mbaud. • full (16) 1 Gbaud. • double (32) 2 Gbaud. • quadruple (64) 4 Gbaud. • octuple(128) 8 Gbaud. The valid values for the Brocade 12000, 24000, and 48000 directors switch are 16 (full) and 32 (double). The valid value for the Brocade 4100 is 64 (quadruple). The valid values - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 165
1588.2.1.1.1.2.9.1.8 5 swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.8 The WWN of the remote port. swFabricMemTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 Supported in Fabric OS v2.6.1 and not v3.2.0. This table contains information on the member switches of a fabric. This might not be available on all - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 166
by the "read" community string. In Secure Fabric OS, the community strings can only be modified on the primary switch. swAgtCmtyEntry 1.3.6.1.4.1.1588.2.1.1.1.4.11.1 An entry containing the community parameters. Index swAgtCmtyIdx swAgtCmtyIdx 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.1 The SNMPv1 community - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 167
swAgtCmtyStr 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2 5 swAgtCmtyStr 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2 This is a community string supported by the agent. If a new value is set successfully, it takes effect immediately. Default values for communities are as follows: • 1 (Secret Code) • 2 (OrigEquipMfr) • - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 168
16 ports Brocade 3900, 4100 32 ports Brocade 4900 64 ports Brocade 7500 16 ports Brocade 7600 16 ports Brocade 12000 64 ports (per logical switch) Brocade 24000 (2 logical switches64 ports (per logical switch) Brocade 24000 (1 logical switch) 128 ports Brocade 48000 256 ports Brocade - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 169
.2.1.1.1.6.2.1.1 The switch port index. Values The physical port number of the switch, plus 1. The valid values for the Brocade 12000, 24000, and 48000 directors are 0 through maximum number of ports. swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 The type of ASIC for the switch port. Values - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 170
of either explicit management action or per configuration information accessible by the switch, swFCPortAdmStatus is then changed to either the 1 (online) or is not supported. swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 Values Indicates the link state of the port. When the port's link - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 171
Indicates the media transmitter type of the port. Values Possible values are: • unknown (1) Cannot determine the port driver. • lw (2) Long wave laser. that the port has received. swFCPortRxC3Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 Counts the number of Class 3 frames that the port has received. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 172
errors detected for frames received. swFCPortRxTruncs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 Counts the number of truncated frames that the port has received. swFCPortRxTooLongs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 Counts the number of received frames that are too long. swFCPortRxBadEofs 1.3.6.1.4.1.1588 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 173
.8 Gbit/sec is only applicable to the Brocade DCX director. swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 Supported in Fabric OS v4.1.x and later. A string that indicates the name of the addressed port. NOTE The names should be persistent across switch reboots. Port names do not have to be unique - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 174
is expected. The format of the string is: port, 'slot' being present only for bladed systems. For directors, such as Brocade 48000: swFCPortSpecifier.64 = 4/15 For non-bladed systems, such as Brocade 4100: swFCPortSpecifier.31 = 30 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 This string - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 175
(2) swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 The Fibre Channel WWN of the port entry. swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 The contents of a symbolic name of the port entry. In FC-GS-2, a symbolic name consists of a byte array of 1 through 256 bytes, and the first byte of the array - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 176
5 swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 The class of services supported by the port. This value is a hard-coded bitmap and indicates the supported services as follows: • Class F (1) • Class 1 (2) • Class F-1 (3) • Class 2 (4) • Class F-2 (5) • Class 1-2 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 177
in the event table. Values (v3.0 only) The value ranges from 0 to 64. (v4.0 only) The value ranges from 0 to 255. (v4.2 only) 1.3.6.1.4.1.1588.2.1.1.1.8.5 The table of event entries. Only external RAS log messages are supported. Fabric OS v6.0.0 does not have Panic or Debug level messages. All - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 178
5 swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 The date and time that this event occurred. The return string is displayed using the following format: YYYY/MM/DD-hh:mm:ss Where: YYYY = Year MM = Month DD = Date hh = Hour mm = Minute ss = Seconds - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 179
• The scalar, swFwFabricWatchLicense, is used to tell is if the switch has proper license for Fabric Watch. • One table, "swFwClassAreaTable .2", contains classArea information such as threshold unit string, time base, low thresholds, and so forth. SwFwClassAreaEntry contains control information - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 180
value. swFwDefaultBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.7 A default buffer size value. swFwCustUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.8 A customizable unit polling period for the Fabric Watch classArea combination. swFwTbMin = port (class), link loss (area). swFwTbNone = environment (class), - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 181
10.2.1.11 A customizable high-threshold value for a Fabric Watch classArea combination. swFwCustBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12 A customizable buffer size value for a Fabric Watch classArea combination. swFwThLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13 swFwThLevel is used to point to the - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 182
this variable to swFwCancelWrite. swFwDefaultChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15 Default action matrix for changed event. swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 Default action matrix for an exceeded event. The exceeded value might be either above the high threshold or - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 183
swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 5 swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 Custom action matrix for an exceeded event. swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22 Custom action matrix for below event. swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 184
4 envTemp004: index of 5 envTemp005: index of 6 For port-related classes such as E_Port, the indexes are from 1 through (number of ports). For example, the indexes for E_Port classlink loss area: 14 eportLink014: index of 15 eportLink015: index of 16 166 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 185
1 GBIC Temperature 1 GBIC RX power 1 GBIC TX power 1 GBIC Current 1 E Port Invalid CRCs 7 E Port Link Failures 7 E Port Protocol Errors 7 E Port RX Performance 7 E Port Loss of Signal 7 E Port State Changes 7 E Port Loss of Sync 7 E Port TX Performance 7 E Port Invalid Words 7 Fabric Domain ID - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 186
Sync 13 FCU Port TX Performance 13 FCU Port Invalid Words 13 Port Invalid CRCs 0 Port Link Failures 0 Port Protocol Errors 0 Port RX Performance 0 Port Loss of Signal 0 Port State Changes 0 Port Loss of Sync 0 Port TX Performance 0 Port Invalid Words 0 FOP Port Invalid CRCs 13 FOP Port Link Failures - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 187
21.1.1 An entry of an individual end devices' RLS. Index swEndDevicePort, swEndDeviceAlpa Since Brocade switches start with port # 0, the SNMP port # should be physical port # plus 1. In turn, that means that SNMP port # 3 translates to port # 2. Fabric OS MIB Reference 169 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 188
21.1.1.1 swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 This object represents the port of the local switch to which the end device is connected. This 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 Invalid CRC count for the end device. Switch Group Not supported. 170 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 189
1.3.6.1.4.1.1588.2.1.1.1.22.2.1.2 This object identifies the WWN of the member switch. swGroupMemPos 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.3 This object identifies the position of the member switch in the group, based on the order that the switches were added in the group. Fabric OS MIB Reference 171 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 190
that occurred on the frames destined to each possible AL_PA attached to a specific port. For the Brocade 4100, this value will always be 0. CRC counters are not supported on this platform. swBlmPerfEEMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.2 End-to-end monitoring counter table. swBlmPerfEEMntEntry - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 191
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 This object identifies the port number of the switch. swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2 This object Filter-based monitoring counter. swBlmPerfFltMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.3.1 Index Filter-based monitoring counter for given port. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 192
actual reference key. swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3 Get statistics of filter-based monitor. Filter-based monitoring provides information about a filter hit count, such as: for the switch. For the Brocade 4100, cc ports per trunk are supported. swTrunkEntry 1.3.6.1.4.1. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 193
group. swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 The active trunk status of the member port. Values are enabled (1) or disabled (0). swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 Displays trunking performance information for the switch. swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 Entry for - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 194
. This value can be obtained through the CLI in the output of the portStatsShow command (stat_wtx value) for the corresponding trunk ports. swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4 Gives the aggregate value of the received words by this trunk group. The syntax for this MIB variable is an OCTET - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 195
HA MIB Overview The HA-MIB provides information about the High Availability features of Fabric OS v6.0.0. This MIB is supported only in Fabric OS v4.1.0 and later (and is not supported in Fabric OS v3.x or Fabric OS v2.6.x). The HA-MIB depends on the SW-MIB. This dependency requires a management - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 196
the objects or definitions that are imported into the HA-MIB and the modules from which they are imported. TABLE 16 Object Objects Imported into the HA-MIB MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE TimeTicks Integer32 IpAddress mib-2 fibrechannel entPhysicalIndex entPhysicalName DisplayString - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 197
the Various Brocade Switches Platform Blades Fans Power Supply WWN Card Brocade 3850 Brocade 3900 Brocade 4012 Brocade 4100 Brocade 4900 Brocade 5000 Brocade 7500 Brocade 7600 Brocade 12000 Brocade 24000 NA NA NA NA NA NA NA NA 8 port blades 2 CP blades 8 port blades 2 CP blades 4 fans (not - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 198
Brocade Switches Blades Fans Brocade 48000 Brocade DCX Data Center Backbone Director 8 port blades 2 CP blades 8 port blades 2 CP blades 3 fans 3 fans Power faulty(5) fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 The slot number of the blade, and the unit number for everything else. WWN Card - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 199
fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 6 fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 The supplier ID. fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 The supplier part number. fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.6 The supplier serial number. fruSupplierRevCode 1.3.6.1.4.1. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 200
• 9: fan(9) fruHistoryObjectNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.3 The slot number of the blade and the unit number for everything else. fruHistoryEvent 1.3.6.1.4.1.1588.2.1.2.1.6.1.4 Values Brocade part number of the FRU object. fruHistoryFactorySerialNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 The Brocade - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 201
entPhysicalIndex cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 Values The current status of the CP. Possible values are: • 1: other(1) • 2: unknown(2) • 3: active(3) • 4: standby(4) • 5: failed(5) cpIpAddress 1.3.6.1.4.1.1588.2.1.2.1.7.1.2 The IP address of the Ethernet interface of this CP. cpIpMask - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 202
triggers that will generate this trap are: • Enable or disable a FRU component Sample trap output for Fabric OS v6.0.0; The following trap is generated when switch is rebooted: entPhysicalName.11 = MODULE 5 fruStatus.11 = off(4) 184 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 203
cpStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.2 6 cpStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.2 Objects 1: cpStatus 2: cpLastEvent 3: swID 4: swSsn Status Current This trap is sent when the status of any CP object changes. The cpLastEvent variable provides the information about the event that - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 204
18 HA-MIB Traps and Example Triggers HA-MIB Traps Trigger fruStatusChanged cpStatusChanged fruHistoryTrap Example events that will trigger this trap: switch reboot Example events that will trigger this trap: Reboot firmwareDownload Example events that will trigger this trap: Add or remove a FRU - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 205
FICON MIB Overview The FICON MIB module (LINK-INCIDENT-MIB) defines support for FICON in Fabric OS v4.1.2 and later. This MIB addresses link incident and link failure data for FICON hosts and devices connected to a Brocade switch. The descriptions of each of the MIB variables in this chapter come - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 206
7 FICON MIB Overview FIGURE 53 - private - enterprises - bsci - commDev - fibreChannel - fcSwitch - linkIncidentMIB - ficonRNID - ficonLIRR - ficonRLIR - linkIncidentMIBTraps Overall Tree Structure for FICON MIB (linkIncidentMIB) - linkIncidentMIB - ficonRNID - nodeRNIDTableNumEntries - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 207
value of Model Number. Represents the link failure type. OCTET STRING (SIZE (3)) OCTET STRING (SIZE (3)) INTEGER { bitErrorRate(2), lossOfSignal(3), nOSRecognized(4), primitiveSequenceTimeout(5), invalidSeqForPortState(6), loopInitializationTimeout(7), lossOfSignalInLoopInit(8) } RNIDManufacturer - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 208
Sequence number of the self OCTET STRING (SIZE (12)) describing node. Represents the manufacturer OCTET STRING (SIZE (2)) plant name or code. Represents the value of Param. OCTET STRING (SIZE (3)) Represents the Port Type. INTEGER { n-port (1), nl-port (2) } Represents the value of RNID Flag - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 209
for each FICON RNID node attached to a switch. nodeRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 A entry containing the is an incident port. nodeRNIDPID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.3 PID for an Incident port. nodeRNIDFlags 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.4 RNID flags for an Incident port. Bits 0-2 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 210
Node identification tag of the connected port. nodeRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.14 Node parameters of the connected port. switchRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.3 The number of entries in an RNID table that corresponds to the switch. See the Fabric OS Command Reference - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 211
1588.2.1.1.50.2.4.1.7 Identifies the manufacturer plant of the switch. switchRNIDSequenceNumber 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.8 Identifies the sequence number of the switch. switchRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.9 Identification tag of the switch. Fabric OS MIB Reference 193 53-1000602 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 212
the parameters of the switch. ficonLIRR Group This port. LIRRListenerPID 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.3 PID for the Listener port. LIRRRegType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.4 Registration type: conditional or unconditional. LIRRProtocol 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5 Protocol type supported - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 213
port type. LIRRFormat 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 Registration type: conditional or unconditional. ficonRLIR Group This group contains all Registered Link Incident Report (RLIR) group objects for FICON. rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.1 The number of entries in a switch - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 214
RLIR Incident port number. This is a vendor-specific port number. rLIRConnectedPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8 RLIR Connected port WWN. Incident traps. linkRNIDDeviceRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 A device registered with the switch. 196 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 215
3: nodeRNIDConnectedPortWWN linkRNIDDeviceDeRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 Objects A device deregistered with the switch. 1: nodeRNIDIndex 2: nodeRNIDIncidentPortWWN 3: nodeRNIDConnectedPortWWN linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 A listener for link - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 216
7 linkRLIRFailureIncident 1.3.6.1.4.1.1588.2.1.1.50.21.0.5 198 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 217
in this chapter come directly from the FCMGMT-MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific information and are provided by Brocade. The object types in FCMGMT-MIB are organized into the following groups: • Connectivity • Trap Registration • Revision Number - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 218
8 FibreAlliance MIB Overview FCMGMT-MIB SYSTEM ORGANIZATION OF MIB OBJECTS Figure 56 to Figure 66 depicts the high level organization of the FCMGMT-MIB. - iso - org - dod - internet - experimental - fcmgmt - connSet - uNumber 1.3.6.1.3.94.1.1 - systemURL 1.3.6.1.3.94.1.2 + connUnitTable 1.3.6.1.3.94 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 219
94.1.6.1.13 - connUnitNumSensors 1.3.6.1.3.94.1.6.1.14 - connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15 - connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16 - connUnitNumRevs 1.3.6.1.3.94.1.6.1.17 - connUnitNumZones 1.3.6.1.3.94.1.6.1.18 - connUnitModuleId 1.3.6.1.3.94.1.6.1.19 - connUnitName - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 220
1.3.6.1.3.94.1.10.1.13 - connUnitPortVendor 1.3.6.1.3.94.1.10.1.14 - connUnitPortSpeed 1.3.6.1.3.94.1.10.1.15 - connUnitPortControl 1.3.6.1.3.94.1.10.1.16 - connUnitPortName 1.3.6.1.3.94.1.10.1.17 - connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 - connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 221
FibreAlliance MIB Overview 8 - connUnitLinkTable 1.3.6.1.3.94.1.12 - connUnitLinkEntry 1.3.6.1.3.94.1.12.1 - connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 - connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 - connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 - connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 - - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 222
connUnitPortStatCountClass1FBSYFrames 1.3.6.1.3.94.4.5.1.16 - connUnitPortStatCountClass1PBSYFrames 1.3.6.1.3.94.4.5.1.32 - connUnitPortStatCountRxLinkResets 48 - connUnitPortStatCountDelimiterErrors 1.3.6.1.3.94.4.5.1.49 - connUnitPortStatCountEncodingDisparityErrors 1.3.6.1.3.94.4.5.1.50 FIGURE 64 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 223
for this entry in the SNS table. Octet String of size An optional global-scope identifier for this connectivity unit. It MUST be a WWN for this 16 connectivity unit or 16 octets of value zero. Octet String of size 3 The Port Identifier for this entry in the SNS table. Fabric OS MIB Reference - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 224
3-14. 3 (hub) Passive connectivity unit supporting loop protocol. 4 (switch) Active connectivity unit supporting multiple protocols. 5 (gateway) Unit that not . 12 (module) Subcomponent of a system. 13 (swdriver) Software driver. 14 (storage-access-device) Provides storage management and access for - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 225
units present on this system (represented by this agent). Might be a count of the boards in a chassis or the number of full boxes in a rack. The connectivity unit is mapped to a switch. uNumber is always set to 1. systemURL 1.3.6.1.3.94.1.2 The top-level URL of the system; if it does not exist, the - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 226
as connUnitGlobalId if connUnitGlobalId is known and stable. The Brocade implementation maps the switch WWN to the top 8 octets of this variable unit or 16 octets of value 0. The following characteristics are required: • WWN formats requiring fewer than 16 octets must be extended to 16 octets with - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 227
18 ports Brocade 4020 20 ports Brocade 4024 24 ports Brocade 200E, 3800, 3850 16 ports Brocade 3900, 4100 32 ports Brocade 4900 64 ports Brocade 5000 32 ports Brocade 7500 16 ports Brocade 7600 16 ports Brocade 12000 128 ports Brocade 24000 128 ports Brocade 48000 256 ports - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 228
94.1.6.1.7 The connectivity unit vendor's product model name. This is the same as for sysDescr (set for as many as 79 bytes). If the switch is in Access Gateway mode, the default value is Access Gateway. connUnitSn 1.3.6.1.3.94.1.6.1.8 The serial number for this connectivity unit. Set to the SSN - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 229
if required. If this value is not applicable, return all bits to 1. Set to the switch domain ID (as per FC-SW). For a Brocade Access Gateway device, the value is hard coded as "11 11 11". A Brocade Access Gateway does not have a domain ID. connUnitProxyMaster 1.3.6.1.3.94.1.6.1.12 A value of "yes - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 230
a fabric switch it is set to 2 (no). For a Brocade Access Gateway device, since the switch is behaving as a device management tool and not a Fibre Channel switch, the value or connUnitPortStatus changed. Not supported. connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16 The sysuptime time stamp ( - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 231
this connUnit is not part of a module. Set to the WWN of the switch. connUnitName 1.3.6.1.3.94.1.6.1.20 A display string containing a name for this connectivity unit. be persistent between boots. For a fabric switch set to sysDescr and read-only. For a Brocade Access Gateway device set to "Access - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 232
cannot be used to perform meaningful Fibre Channel work. • onlineConnUnit (6): Enable switch. The addressed unit puts itself into an implementation-dependant online state. In can be defined in connUnitEventTable. For Fabric OS v3.0 this value is 64. For Fabric OS v4.0 this value is 255. For Fabric OS - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 233
agent. Usage Notes This table lists the versions of hardware and software elements in the switch. One entry for the hardware platform version and another entry for the Fabric OS version. For example, for the Brocade 4100 the hardware platform number is 32.0. The Fabric OS version for this release is - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 234
hardware version. Index 2 returns the software version. connUnitSensorTable 1.3.6.1.3.94.1.8 Table of the sensors supported by each connectivity unit managed by this agent. See Table 14 on page 142 for specific sensor counts on the various switches - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 235
the sensor. Returns the serial ID if this is for the power supply; otherwise, returns Null. connUnitSensorMessage 1.3.6.1.3.94.1.8.1.6 This describes the status are: • unknown (1) • other (2) • battery (3) • fan (4) • power-supply (5) • transmitter (6) • enclosure (7) • board (8) • receiver (9) The - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 236
• airflow (7) • frequency (8) • power (9) • door (10) Not supported in Fabric OS v2.6.1. connUnitPortTable 1.3.6.1.3.94.1.10 Generic information on ports for a specific connUnit NOTE Information about the GbE ports on a Brocade 7500 or FR4-18i blade is not supported. connUnitPortEntry 1.3.6.1.3.94 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 237
. The Brocade switches support 0 to maximum number of system supported ports. The maximum number of supported ports are as follows: Brocade 3200, 3250 8 ports Brocade 4012 12 ports Brocade 200E, 3800, 3850 16 ports Brocade 3900, 4100 32 ports Brocade 4900 64 ports Brocade 5000 32 ports - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 238
16 • class-five 32 • class-six 64 For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. For a Brocade Access Gateway, both the F_Port and N_Port this value is 0x0008. An Access Gateway supports class-three services only, therefore the value is 8 for both port - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 239
94.1.10.1.8 Values The technology of the port transceiver. Possible values are: • unknown (1) • other (2) • unused (3) • shortwave (4) • longwave (5) • copper (6) • scsi (7) • longwaveNoOFC (8) • shortwaveNoOFC (9) • longwaveLED (10) • ssa (11) (Not supported in Fabric OS v2.6.1.) Fabric OS MIB - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 240
. This is in IEEE Extended format, and the extension contains the internal port number of each port. NOTE The internal port number is 1 less than the port index. For example, if the switch has WWN 10:00:00:60:69:10:02:18, then port numbers 0 and 6 have WWN 20:00:00:60:69:10:02 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 241
per second. For example, the valid values for Brocade 12000, 24000, and 48000 directors: 125,000 KBps, 250,000 KBps, or 500,000 KBps depending on the configuration. connUnitPortControl 1.3.6.1.3.94.1.10.1.16 Controls the addressed connUnit's port. Valid commands are: • resetConnUnitPort If the - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 242
uses in-band communication (FC-IP) with the switch, either of the two following actions might result in a loss of in-band communication with the switch: • Disabling the FC port that is connected to the management station • Disabling the embedded port 224 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 243
Brocade switches support 0 through maximum number of ports. The maximum number of supported ports are as follows: Brocade 3200, 3250 8 ports Brocade 4012 12 ports Brocade 200E, 3800, 3850 16 ports Brocade 3900, 4100 32 ports Brocade 4900 64 ports Brocade 5000 32 ports Brocade 7500 16 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 244
this particular port. If this has a value of 0, then there are no statistics available for this port. The port type information 16 = VI • 32 = FICON connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21 Not supported in Fabric OS v2.6.1.Supported in v5.x, v6.0. This is the bit mask that specifies the driver - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 245
and 20:06:00:60:69:10:02:18, respectively. However, the embedded port has WWN 10:00:00:60:69:10:02:18, the same as the switch. The N_Ports on a Brocade Access Gateway are the WWN of the switch (i.e., it is the same as the connUnitId). The F_Ports are the WWN of - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 246
set back to 0 at reset. The relationship of this value to the index is that internal event ID might represent a smaller number than a 32-bit integer (for example, maximum 100 entries) and would only have a value range up to connUnitMaxEvents. Same function as connUnitEventIndex. connUnitREventTime - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 247
connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 8 DDMMYYYY HHMMSS Where: DD = day number MM = month number YYYY = year HH = hours MM = minutes SS = seconds If not applicable, returns a null string. connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 This is the sysuptime time stamp when the event occurred. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 248
to other connectivity units: X is switch data and Y is other end. The port for the information needed for the link table. This table is accessed either directly, if the management software has reset. The total number of entries is defined by the size of the table. For an entry to be considered valid - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 249
number of ports is reserved for ISL. Indexes maximum number of ports + 1 and above are reserved for end devices and are calculated based on equal to its connUnitID. WWN of the local switch. connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 The port number on the unit specified by connUnitLinkNodeIdX, - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 250
WWN of the remote switch. Device: Node name of the device. connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 The port number on the port number of the remote port. Device: -1. connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8 The port WWN on the unit specified by connUnitLinkNodeIdY, if known; otherwise, 16 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 251
. • ISL: Switch device. • End devices: End device types based on an FCP Inquiry. Brocade does not support Hubs. TABLE 21 connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a Big Endian value of 24 bits - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 252
for all other Tx objects. connUnitPortStatCountRxObjects 1.3.6.1.3.94.4.5.1.5 The number of frames, packets, IOs, and so forth, that have been received by this port. A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should not count frames passed through. This value represents - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 253
side is not providing any credit. This is a Fibre Channel statistic only. connUnitPortStatCountInputBuffersFull 1.3.6.1.3.94.4.5.1.9 Supported. The number of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to 0. There is no credit to provide - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 254
1.3.6.1.3.94.4.5.1.15 The number of Class 1 Frames transmitted out this port. This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames. Return value: 80 0 0 0 0 0 0 0 connUnitPortStatCountClass1FBSYFrames 1.3.6.1.3.94.4.5.1.16 The number of times that FBSY was returned to this - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 255
number of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected at the destination N_Port. This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames. Return value: 80 0 0 0 0 0 0 0 connUnitPortStatCountClass2RxFrames 1.3.6.1.3.94.4.5.1.20 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 256
.4.5.1.24 The number of times that FRJT was returned to this port as a result of a Class 2 Frame that was rejected by the fabric. This is a Fibre Channel only statistic. Not supported. Return value: 80 0 0 0 0 0 0 0 connUnitPortStatCountClass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 The number of times that - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 257
The number of broadcast frames or packets received at this port. Not supported. Return value: 80 0 0 0 0 0 0 0 connUnitPortStatCountTxBroadcastObjects 1.3.6.1.3.94.4.5.1.32 The number of broadcast frames or packets transmitted out this port. On a Fibre Channel loop, count only OPNr frames generated - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 258
connUnitPortStatCountLinkFailures 1.3.6.1.3.94.4.5.1.39 This is a Fibre Channel only statistic. Not supported. Return Value: 80 0 0 0 0 0 0 0 1.3.6.1.3.94.4.5.1.44 The number of instances of synchronization loss detected at port. This count is part of the Link Error Status Block (LESB - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 259
Fibre Channel only statistic. connUnitPortStatCountAddressErrors 1.3.6.1.3.94.4.5.1.48 The number of frames received with port. This is a Fibre Channel only statistic. Service Group Not supported in Fabric OS v2.6.1. Implementation of the Service group is mandatory for all systems. The Service - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 260
1.3.6.1.3.94.5.2.1 This table contains an entry for each object registered with this port in the switch. Implementation of the Connectivity Unit Service Tables group is mandatory for all systems. A Brocade Access Gateway has no name server information; therefore this table is disabled - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 261
the SNS table. connUnitSnsClassOfSvc 1.3.6.1.3.94.5.2.1.1.6 The Classes of Service offered by this entry in the SNS table. connUnitSnsNodeIPAddress 94.5.2.1.1.9 The FC-4 types supported by this entry in the SNS table. connUnitSnsPortType 1.3.6.1.3.94.5.2.1.1.10 The port type of this entry in - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 262
trapMaxClients 1.3.6.1.3.94.2.1 The maximum number of SNMP trap recipients supported by the connectivity unit. Set to 6. trapClientCount 1.3.6.1.3.94 . trapRegPort 1.3.6.1.3.94.2.3.1.2 The UDP port to send traps to for this host. Normally this would be the standard trap port (162). This object is an - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 263
trapRegFilter 1.3.6.1.3.94.2.3.1.3 8 trapRegFilter 1.3.6.1.3.94.2.3.1.3 This value defines the trap severity filter for this trap host. The connUnit sends traps to this host that have a severity level less than or equal to this value. The default value of this object is Warning. The mapping - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 264
Tables The Connectivity Unit Port Statistics Fabric Table (connUnitPortStatTable) is supported in v6.0, v5.x, and v2.6.1. Brocade does not support the following: • Connectivity Unit Port Statistics Hub Table • Connectivity Unit Port Statistics SCSI Table • Connectivity Unit Port Statistics LAN/WAN - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 265
.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.1 = warning(4) connUnitState.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.1 = offline(3) See the Fabric Watch Administrator's Guide on how the switch status is determined. connUnitDeletedTrap Enterprise fcmgmt Variables connUnitId A connUnit has been deleted - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 266
trap; the instance string is NULL, if the port name is not defined for the specified port. Sample trap output for Fabric OS v6.0.0: connUnitPortStatus.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.29 = ready(3) connUnitPortState.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.29 = online(2) connUnitPortName - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 267
come directly from the MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific information and are provided by Brocade. The following FCIP MIB tables are supported. • FCIP entity instance table • FCIP link table • FCIP extended link table The FCIP entity instance - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 268
OBJECTS Figure 67, Figure 68, Figure 69, and Figure 70 depict the high level organization of the FCIP MIB relevant to the supported tables. See RFC4044 for a description of the entire MIB. - iso - org - dod - internet - experimental - mgmt - mib-2 - fcipMIB 1.3.6.1.2.1.224 - fcipObjects - fcipconfig - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 269
on a 7500 or on an FC4-18i blade. There is an entry for each configured . Example: IP interface on gigE 0 port. fcipEntityAddressType 1.3.6.1.2.1.224.1.1.4.1.3 The type of Internet . Only address types IPv4 and IPv6 are supported. fcipEntityAddress 1.3.6.1.2.1.224.1.1.4.1.4 The Internet address for - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 270
port. The default is 0. Not used. fcipEntitySeqNumWrap 1.3.6.1.2.1.224.1.1.4.1.6 An indication of whether the FCIP Entity supports FCIP Entity supports PHB IP quality of service (QoS). Not can be changed if the row status is in active state. The object fcipEntityTcpConnPort takes the default value - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 271
The type of Internet address contained in the corresponding instance of fcipLinkLocalFcipEntityAddress. Only address types IPv4 and IPv6 are supported. fcipLinkLocalFcipEntityAddress 1.3.6.1.2.1.224.1.1.5.1.6 The Internet address for the local end of this FCIP Link. The format of this object is - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 272
the corresponding instance of fcipLinkRemFcipEntityAddress. Only address types IPv4 and IPv6 are supported. fcipLinkRemFcipEntityAddress 1.3.6.1.2.1.224.1.1.5.1.10 The Internet address for the remote end of can be changed if the row is in active(1) state. The object fcipLinkCost is set to - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 273
fcipExtendedLinkTcpDropped Packets 9 fcipExtendedLinkTcpDropped Packets A counter containing the number of packets lost for FC control traffic and data transfer over an FCIP tunnel. fcipExtendedLinkTcpSmoothedRTT The round trip time (latency) in milleseconds for a transfer over an FCIP tunnel. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 274
9 fcipExtendedLinkIfIndex 256 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 275
directly from the MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific information and are provided by Brocade. The following iSCSI MIB tables are supported. • iSCSI Instance Attributes table • iSCSI Node Attributes table • iSCSI Session Attributes table • iSCSI - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 276
SYSTEM ORGANIZATION OF MIB OBJECTS Figure 71 to Figure 76 depict the high level organization of the iSCSI MIB relevant to the supported tables. See RFC4544 for a description of the entire MIB. - iso - org - dod - internet - experimental - mgmt - mib-2 - iscsimibmodule - iscsiObjects - iscsiInstance - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 277
.1.1.5.1.1.15 iscsiNodeErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.5.1.1.16 iscsiNodeDiscontinuityTime 1.3.6.1.2.1.142.1.1.5.1.1.17 iscsiNodeStorageType 142.1.1.10.1.1.15 iscsiSsnConnectionNumber 1.3.6.1.2.1.142.1.1.10.1.1.16 iscsiSsnAuthIdentity 1.3.6.1.2.1.142.1.1.10.1.1.17 iscsiSsnDataSequenceInOrder - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 278
12 iscsiCxnDataIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.13 iscsiCxnRecvMarker 1.3.6.1.2.1.142.1.1.11.1.1.14 iscsiCxnSendMarker 1.3.6.1.2.1.142.1.1.11.1.1.15 iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.16 FIGURE 76 iscsiConnectionAttributesTable Hierarchy 260 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 279
persistent across reboots.This value is not accesible. iscsiInstDescr 1.3.6.1.2.1.142.1.1.1.1.2 A UTF-8 string to describe the iSCSI instance. Only a single instance is supported so the value will be 0. When used with mulitple iSCSI instances, it may be used in an implementation dependent manner to - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 280
failed. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiDiscontinuityTime. Not supported. iscsiInstLastSsnFailureType 1.3.6.1.2.1.142.1.1.1.1.11 Reason for failure taken from the iscsiInstSsnErrorStatsTable. A value of 0.0 is used if the reason - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 281
occurence of a discontinuity in one or more counters used by this instance. Not supported. iscsiNodeAttributesTable This table is a list of iSCSI nodes per each iSCSI instance 15 • iscsiNodeErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.5.1.1.16 • iscsiNodeDiscontinuityTime 1.3.6.1.2.1.142.1.1.5.1.1.17 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 282
be resolved into a set of addresses through various discovery services. iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 A character string that is a human end of the connection during a login request or response. Not supported. iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 A node can operate in a target role - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 283
minimum time, in seconds, to wait before attempting an explicit/implicit logout or active iSCSI task reassignment after an unexpected connection termination or a connection reset. Not supported. iscsiNodeDefaultTime2Retain 1.3.6.1.2.1.142.1.1.5.1.1.15 The minimum time, in seconds, to wait, after an - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 284
10 iscsiNodeErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.5.1.1.16 Not supported. iscsiNodeErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.5.1.1.16 The Error Recovery Level preference of this node. Not supported. iscsiNodeDiscontinuityTime 1.3.6.1.2.1.142.1.1.5.1.1.17 The value of SysUpTime at the most recent - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 285
1.3.6.1.2.1.142.1.1.10.1.1.14 • iscsiSsnMaxBurstLength 1.3.6.1.2.1.142.1.1.10.1.1.15 • iscsiSsnConnectionNumber 1.3.6.1.2.1.142.1.1.10.1.1.16 • iscsiSsnAuthIdentity 1.3.6.1.2.1.142.1.1.10.1.1.17 • iscsiSsnDataSequenceInOrder 1.3.6.1.2.1.142.1.1.10.1.1.18 • iscsiSsnDataPDUInOrder 1.3.6.1.2.1.142 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 286
10 iscsiSsnIndex 1.3.6.1.2.1.142.1.1.10.1.1.2 iscsiSsnIndex 1.3.6.1.2.1.142.1.1.10.1.1.2 An arbitrary integer that uniquely identifies a particular node within an iSCSI instance present on the local system. This value is not accesible.This index value must not be modified or reused by an agent - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 287
. iscsiSsnFirstBurstLength 1.3.6.1.2.1.142.1.1.10.1.1.14 The maximum length supported for unsolicited data sent within this session. iscsiSsnMaxBurstLength -In or Data-Out PDUs. iscsiSsnConnectionNumber 1.3.6.1.2.1.142.1.1.10.1.1.16 The number of transport protocol connections that currently belong - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 288
of this session's counters suffered a discontinuity. When a session is established, and this object is created, it is initialized to the current value of SysUpTime. Not supported. 270 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 289
10 iscsiSessionStatsTable The isciSessionStatsTable contains performance statistics based on iSCI data bytes and PDUs. A Low Capacity shadow object of iscsiSsnTxDataOctets for those systems that don't support Counter64. If this counter has suffered a discontinuity, the time of the - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 290
142.1.1.10.2.1.6 iscsiLCRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.6 A Low Capacity shadow object of iscsiSsnRxDataOctets for those systems that don't support Counter64. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 291
of active connections 15 • iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.16 iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 An arbitrary iSCSI login response with the final bit set has not been sent or received. • full - A valid iSCSI login response with the final bit set has been sent or received. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 292
is hard coded to value "full" iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4 The type port used by this connection. This object cannot have the value zero, since it represents an established connection. iscsiCxnMaxRecvDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.10 The maximum data payload size supported - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 293
identifies whether or not this connection is inserting markers in its outgoing data stream. Hardcoded to false. iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.16 Active version number of the SCSI specification negotiated on this connection. Hardcoded to 0. Fabric OS MIB Reference 275 53-1000602 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 294
10 iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.16 276 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 295
based listing of MIB objects. To see the correlation of various switch objects to MIB objects, including the following: • Switch Variables 277 • Sensor Variables 277 • Port assist in monitoring or modifying the status/state of fans, power supply, and temperature are in the following tables or - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 296
81 • fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 61 • Fx_Port Physical Level Table 61 • fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 70 • Fibre Channel Port Group 150 Variables for Statistics and Measurement • Statistics Group 233 • fcFxPortErrorTable 1.3.6.1.2.1.75.1.3.1 65 • fcFxPortC2AccountingTable - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 297
iSCSI Instance Information Variables A iSCSI Instance Information Variables MIB variables that assist in gathering information about iSCSI instances are in the following tables: • iscsiInstanceAttributesTable 261 • iscsiNodeAttributesTable 263 • iscsiNodeAttributesTable 263 • - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 298
A iSCSI Instance Information Variables 280 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 299
MIB OIDs and Their Matching Object Names Appendix B This appendix provides a listing of the MIB object names and the corresponding MIB Object ID (OID) associated with each. MIB OIDs The following matrix allows you to identify a MIB object name according to its related OID. TABLE 24 MIB Object - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 300
page 61 page 61 page 62 page 62 page 62 page 62 page 63 page 63 page 63 page 63 page 63 page 63 page 64 page 64 page 64 page 64 282 Fabric OS MIB Reference 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 301
75.1.4.1.1.5 1.3.6.1.2.1.75.1.4.1.1.6 1.3.6.1.2.1.75.1.4.1.1.7 1.3.6.1.2.1.75.1.4.1.1.8 1.3.6.1.2.1.75.1.4.1.1.9 1.3.6.1.2.1.75.1.4.1.1.10 1.3.6.1.2.1.75.1.4.2 1.3.6.1.2.1.75.1.4.2.1 1.3.6.1.2.1.75.1.4.2.1.1 Page No. page 64 page 64 page 64 page 65 page 65 page 65 page 65 page 65 page 65 page 65 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 302
B MIB OIDs TABLE 24 MIB Object Name/OID Matrix (Continued) MIB Object Name OID fcFxPortC2OutFrames fcFxPortC2InOctets fcFxPortC2OutOctets fcFxPortC2Discards fcFxPortC2FbsyFrames fcFxPortC2FrjtFrames fcFxPortC3AccountingTable fcFxPortC3AccountingEntry fcFxPortC3InFrames fcFxPortC3OutFrames - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 303
MIB OIDs B TABLE 24 MIB Object Name/OID Matrix (Continued) MIB Object Name OID fcFeErrorGroup fcFeClass1AccountingGroup fcFeClass2AccountingGroup fcFeClass3AccountingGroup fcFeCapabilitiesGroup experimental fibreChannel fcFabric fcFe fcFeConfig fcFabricName fcElementName fcFeModuleCapacity - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 304
fcFxPortCosSuppAgreed fcFxPortIntermixSuppAgreed 1.3.6.1.3.42.2.1.1.5.1.13 1.3.6.1.3.42.2.1.1.5.1.14 1.3.6.1.3.42.2.1.1.5.1.15 1.3.6.1.3.42.2.1.1.5.1.16 1.3.6.1.3.42.2.1.1.5.1.17 1.3.6.1.3.42.2.1.1.5.1.18 1.3.6.1.3.42.2.1.1.5.1.19 1.3.6.1.3.42.2.1.2 1.3.6.1.3.42.2.1.2.1 1.3.6.1.3.42 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 305
MIB OIDs B TABLE 24 MIB Object Name/OID Matrix (Continued) MIB Object Name OID fcFxPortStackedConnModeAgreed fcFxPortClass2SeqDelivAgreed fcFxPortClass3SeqDelivAgreed fcFxPortNxPortName fcFxPortConnectedNxPort fcFxPortBbCreditModel fcFeError fcFxPortErrorTable fcFxPortErrorEntry - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 306
1.3.6.1.3.42.2.1.5.1.1.14 1.3.6.1.3.42.2.1.5.1.1.15 1.3.6.1.3.42.2.1.5.1.1.16 1.3.6.1.3.42.2.1.5.1.1.17 1.3.6.1.3.94 1.3.6.1.3.94.1 1.3.6.1.3. 94.1.6.1.13 1.3.6.1.3.94.1.6.1.14 1.3.6.1.3.94.1.6.1.15 1.3.6.1.3.94.1.6.1.16 1.3.6.1.3.94.1.6.1.17 1.3.6.1.3.94.1.6.1.18 1.3.6.1.3.94.1.6.1.19 1.3.6.1.3.94 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 307
MIB OIDs B TABLE 24 MIB Object Name/OID Matrix (Continued) MIB Object Name OID connUnitContact connUnitLocation connUnitEventFilter connUnitNumEvents connUnitMaxEvents connUnitEventCurrID connUnitRevsTable connUnitRevsEntry connUnitRevsUnitId connUnitRevsIndex connUnitRevsRevId - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 308
connUnitLinkAgentAddressTypeY connUnitLinkAgentPortY connUnitLinkUnitTypeY 1.3.6.1.3.94.1.10.1.13 1.3.6.1.3.94.1.10.1.14 1.3.6.1.3.94.1.10.1.15 1.3.6.1.3.94.1.10.1.16 1.3.6.1.3.94.1.10.1.17 1.3.6.1.3.94.1.10.1.18 1.3.6.1.3.94.1.10.1.19 1.3.6.1.3.94.1.10.1.20 1.3.6.1.3.94.1.10 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 309
94.4.5.1.9 1.3.6.1.3.94.4.5.1.10 1.3.6.1.3.94.4.5.1.11 1.3.6.1.3.94.4.5.1.12 1.3.6.1.3.94.4.5.1.13 1.3.6.1.3.94.4.5.1.14 1.3.6.1.3.94.4.5.1.15 1.3.6.1.3.94.4.5.1.16 1.3.6.1.3.94.4.5.1.17 1.3.6.1.3.94.4.5.1.18 1.3.6.1.3.94.4.5.1.19 1.3.6.1.3.94.4.5.1.20 1.3.6.1.3.94.4.5.1.21 Page No. page 233 page - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 310
94.4.5.1.29 1.3.6.1.3.94.4.5.1.30 1.3.6.1.3.94.4.5.1.31 1.3.6.1.3.94.4.5.1.32 1.3.6.1.3.94.4.5.1.33 1.3.6.1.3.94.4.5.1.34 1.3.6.1.3.94.4.5.1.35 94.4.5.1.45 1.3.6.1.3.94.4.5.1.46 1.3.6.1.3.94.4.5.1.47 1.3.6.1.3.94.4.5.1.48 1.3.6.1.3.94.4.5.1.49 1.3.6.1.3.94.4.5.1.50 1.3.6.1.3.94.5 1.3.6.1.3.94 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 311
MIB OIDs B TABLE 24 MIB Object Name/OID Matrix (Continued) MIB Object Name OID connUnitSnsId connUnitSnsPortIndex connUnitSnsPortIdentifier connUnitSnsPortName connUnitSnsNodeName connUnitSnsClassOfSvc connUnitSnsNodeIPAddress connUnitSnsProcAssoc connUnitSnsFC4Type connUnitSnsPortType - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 312
swAgtCmtyTable swAgtCmtyEntry swAgtCmtyIdx swAgtCmtyStr swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.1.14 1.3.6.1.4.1.1588.2.1.1.1.1.15 1.3.6.1.4.1.1588.2.1.1.1.1.16 1.3.6.1.4.1.1588.2.1.1.1.1.18 1.3.6.1.4.1.1588.2.1.1.1.1.19 1.3.6.1.4.1.1588.2.1.1.1.1.20 1.3.6.1.4.1.1588.2.1.1.1.1.21 1.3.6.1.4.1.1588 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 313
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 1.3.6.1.4.1.1588 1588.2.1.1.1.6.2.1.30 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 1.3.6.1.4.1. - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 314
B MIB OIDs TABLE 24 MIB Object Name/OID Matrix (Continued) MIB Object Name OID swFCPortName swFCPortSpecifier swFCPortFlag swNs swNsLocalNumEntry swNsLocalTable swNsLocalEntry swNsEntryIndex swNsPortID swNsPortType swNsPortName swNsPortSymb swNsNodeName swNsNodeSymb swNsIPA swNsIpAddress swNsCos - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 315
.2.1.1.1.10.2.1.12 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.18 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.19 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.20 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 316
B MIB OIDs TABLE 24 MIB Object Name/OID Matrix (Continued) MIB Object Name OID swFwBehaviorType swFwBehaviorInt swEndDevice swEndDeviceRlsTable swEndDeviceRlsEntry swEndDevicePort swEndDeviceAlpa swEndDevicePortID swEndDeviceLinkFailure swEndDeviceSyncLoss swEndDeviceSigLoss swEndDeviceProtoErr - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 317
MIB OIDs B TABLE 24 MIB Object Name/OID Matrix (Continued) MIB Object Name OID swID swEtherIPAddress swEtherIPMask swFCIPAddress swFCIPMask swFabricMemTable swFabricMemEntry swFabricMemWwn swFabricMemDid swFabricMemName swFabricMemEIP swFabricMemFCIP swFabricMemGWIP swFabricMemType - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 318
B MIB OIDs TABLE 24 MIB Object Name/OID Matrix (Continued) MIB Object Name OID swTrunkGrpTable swTrunkGrpEntry swTrunkGrpNumber swTrunkGrpMaster swTrunkGrpTx swTrunkGrpRx sw28k sw21kN24k sw20x0 fcipEntityInstancetable fcipEntityInstanceEntry fcipEntityId fcipEntityName fcipEntityAddressType - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 319
10 ASIC performance monitoring group, 172 B before loading MIBs, 6 Brocade MIB files, 6 C capability group, 70, 92 commands, 10 agtcfgDefault organization of MIB objects, 200, 250, 258 FE MIB overview, 49 Fibre Channel port group, 150 Fibrealliance MIB overview, 199, 249, 257 Fibre-Channel-Fe-MIB ( - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 320
-availability group, 179 I ICMP group, 32 interfaces group, 20 interfaces table, 20 port variables, 277 R revision number scalar, 246 S sensor variables, 277 sensorShow command, 9 Series 3000 Variables, 278, 279 service 119 sw traps, 130 switch group, 170 switch variables, 277 switchStatusPolicySet - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 321
understanding SNMP bASICs, 2 unsupported tables, 246 unsupported traps, 246 Fabric OS MIB Reference 3 53-1000602-01 - HP StorageWorks 4/32 | Brocade Fabric OS MIB Reference Guide v6.0.0 (53-1000602- - Page 322
4 Fabric OS MIB Reference 53-1000602-01
53-1000602-01
October 19, 2007
Fabric OS
MIB Reference
Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x,
v5.0.x, v5.1.x, v5.2.x, v5.3.x, v6.0.0