HP StorageWorks 4400 Brocade Web Tools Administrator's Guide v6.2.0 (53-100119
HP StorageWorks 4400 - Enterprise Virtual Array Manual
View all HP StorageWorks 4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 4400 manual content summary:
- HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 1
53-1001194-01 November 24, 2008 Web Tools Administrator's Guide Supporting Fabric OS v6.2.0 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 2
or implied, concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade and product availability. Export of technical data contained in this document may require please visit http://www.brocade.com/support/oscd. Brocade Communications Systems, Incorporated - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 3
new switch types: Brocade 3250, 3850, 24000. Structural changes, Support changes, Installation changes. December 2003 Advanced Web Tools User's Guide 53-0000522-06 Clarifications on software and hardware support, minor enhancements in procedure text, minor rearranging of content. March 2004 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 4
now available from the Brocade Data Center Fabric Manager (DCFM). July 2008 53-1001133-01 Updates to add support for Brocade Encryption Switch and FS8-18 Encryption Blade. August 2008 Web Tools Administrator's Guide 53-1001194-01 Updates to add support for Virtual November 2008 Fabrics, IPSec - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 5
Web Tools Administrator's Guidev 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 6
viWeb Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 7
xxiii Supported hardware Installing patches on Solaris 8 Installing the Java plug-in on Windows 8 Java plug-in configuration 8 Configuring the Java plug-in for Windows 9 Configuring the Java plug-in for Mozilla family browsers . . . . . 10 Value line licenses 10 Web Tools Administrator's Guide - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 8
out 16 Role-Based Access Control 16 Session management 17 Ending a Web Tools session 17 Requirements for IPv6 support 18 Using the Web Telnet or SSH client window 36 Collecting logs for troubleshooting 36 Managing Fabrics and Switches In this chapter 39 Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 9
47 Configuring fabric settings 48 Enabling insistent domain ID mode 49 Configuring virtual channel settings 49 Configuring arbitrated loop parameters 50 Configuring system services 51 Configuring signed firmware 51 Licensed feature management 52 Activating a license on a switch 52 Removing - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 10
firmware download 75 Switch configurations for mixed fabrics 76 Enabling interoperability 77 Managing Your Ports In this chapter 79 Port management overview 79 Opening the Port Administration window 79 Port Administration window components 81 Controllable 95 User-defined Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 11
117 Admin Domain considerations 118 Predefined performance graphs 118 User-defined graphs 121 Canvas configurations 122 Opening the 125 Creating SID-DID Performance Graphs 125 Creating a SCSI vs. IP Traffic Graph 127 Creating SCSI command graphs 127 Saving graphs to a canvas 128 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 12
and Zones 148 Searching for zone members 148 Clearing the Zoning Database 149 Zone configuration analysis 149 Best practices for zoning 149 x Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 13
10 Chapter 11 Chapter 12 Web Tools Administrator's Guide 53-1001194-01 Working With Diagnostic Features In this Director LEDs 160 Using the FC-FC Routing Service In this chapter 161 Fibre Channel routing overview 161 Supported switches for Fibre Channel routing 162 Setting up FC-FC routing 162 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 14
buffer allocation overview 187 Configuring a port for long distance 189 Administering the iSCSI Target Gateway In this chapter 191 iSCSI service overview 191 Supported platforms for iSCSI 192 Common iSCSI Target Gateway Admin functions 192 Terminology 193 Saving Changes 194 xii Web Tools - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 15
or Removing CHAP users 208 iSCSI Fibre Channel Zone configuration 208 Creating an iSCSI Fibre Channel zone with no effective zone configuration 209 Creating an iSCSI Fibre Channel zone with an effective zone configuration 209 Managing and Troubleshooting Accessibility 210 Routing Traffic - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 16
Domain considerations 216 Viewing user account information 217 Creating user-defined accounts 217 Deleting user-defined accounts 219 Changing user account parameters 220 Maintaining passwords 221 Access control list policy configuration 225 Virtual Fabrics considerations 225 Admin Domain - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 17
an IPSec transform policy 253 Adding an IPSec selector 255 Manually creating an SA 257 Editing an IKE or IPSec policy code page information 267 Viewing the control device state 268 CUP port Configuration 272 Displaying Request Node Identification Data (RNID 272 Limitations In this - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 18
xvi Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 19
Internet Explorer 6 Temporary Internet Settings dialog box 7 Java Control Panel 9 Java Runtime Settings 9 Default Java for browsers interface 12 Signed applet certificate 13 Login dialog box 13 Virtual Fabric login option 14 Login dialog box with Admin Domain Guide xvii 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 20
USB configuration download 70 USB Port Management wizard 73 Firmware Download tab 74 Firmware Download tab for bladed switches 76 Configure tab, Interoperability an SID/DID performance graph 126 Creating a SCSI command graph 128 Zone Administration window 134 Sample 's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 21
User tab 217 Figure 107 Add User Account dialog box (VF 218 Figure 108 Add User Account dialog box (AD 218 Figure 109 Configure Password Rules dialog box 222 Figure 110 Role Mapping (Virtual Choices in the Secondary AAA Service drop-down menu 234 Figure 116 AAA Service tab 235 Figure 117 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 22
254 Figure 129 Selectors tab 255 Figure 130 Add Selector dialog box 256 Figure 131 Add Manual-SA dialog box 257 Figure 132 Device Authentication Policy Mode 259 Figure 133 Device authentication Shared Figure 137 Switch RNID Information 272 xx Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 23
switches 120 Zoning features supported in DCFM Professional and Enterprise Edition . . . . 131 Qos zone name prefixes 132 Alarm notification table fields 183 Long-distance settings and license requirements 189 iSCSI gateway services terminology 193 User role and permissions 216 Relevant - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 24
xxii Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 25
•Supported interface, including system requirements and installation instructions. • Chapter 2, "Using the Firmware", provides information about uploading and downloading configuration files and downloading firmware FC Routing Service," provides information on using the FC-FC Routing Service to share - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 26
performance and status of switches and alert you when problems arise. • Chapter 14, "Administering Extended Fabrics Security Features," provides information on managing user accounts, SNMP, and RADIUS server. to others, this guide identifies exactly which switches are supported and which are - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 27
Enterprise-class platform What's new in this document The following changes have been made since this document was last released: • Changes to GUI icon images and operator components to be consistent with DCFM. • Support for the new DCX-4S Data Center Backbone. • Support for Virtual user- guide - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 28
, or data. DANGER A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to you. Safety labels are also attached directly to products to warn of these conditions or situations. Key terms For definitions specific to Brocade and Fibre Channel, see - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 29
www.t11.org For information about the Fibre Channel industry, visit the Fibre Channel Industry Association Web site: http://www.fibrechannel.org Getting technical help Contact your switch support supplier for hardware, firmware, and software support, including product repairs and part ordering. To - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 30
Detailed description of the problem, including the switch or fabric behavior immediately following the problem, and specific questions • Description of any troubleshooting steps already performed and number and your suggestions for improvement. xxviii Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 31
DCFM 2 •Java installation on the workstation 7 •Java plug-in configuration 8 •Value line licenses 10 •Opening Web Tools 11 •Role-Based Access Control 16 •Session management 17 •Requirements for IPv6 support 18 Web Tools overview Brocade Web Tools is an embedded graphical user interface (GUI - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 32
only for 8 Gbps platforms, such as the Brocade DCX and DCX-4S enterprise-class platforms, the Encryption Switch, and the 300, 5100, and 5300 Tools Web Tools with EGM License Active Directory yes yes support AD Context Switching no yes AD filtered views yes yes Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 33
ACL) Switch Info tab yes yes Switch Status yes yes Switch View right click yes yes options Trace dump yes yes USB Management yes yes User Management yes yes Verify and trouble no yes shoot accessibility between devices Web Tools Administrator's Guide 3 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 34
Web Tools into DCFM is applicable to both DCFM Professional and DCFM Enterprise. The following table details these changes. TABLE 2 Function Web Tools Module > GigE Configure > FCIP Tunnel tab Viewing FCIP tunnels is still supported in Web Tools 6.1.1, but New, Edit Config, and delete are only - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 35
System requirements Before you install Web Tools on your Enterprise Server 5 Advanced Platform SUSE Linux Enterprise Server 10 Internet Explorer 7.0 Internet Explorer 7.0 Internet Explorer 7.0 Internet Explorer 7.0 1.6.0_05 1.6.0_05 1.6.0_05 1.6.0_05 TABLE 4 Supported Guide 5 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 36
internet files used by Java applications For Web Tools to operate correctly, you must delete the temporary internet files used by Java applications. 1. From the Control Panel, open Java. 2. Click the General tab and click Settings. 6 Web Tools Administrator - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 37
files check box if you want to keep those files. 5. Click OK. 6. On the Java Control Panel, click View to review the files that are in the Java cache. If you have notice. 2. Select JRE 5.0 Update 6. 3. Follow the instructions to install the JRE. Web Tools Administrator's Guide 7 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 38
running Fabric OS 5.2.0 or later to install JRE 1.6.0. Web Tools guides you through the steps to download the family browser (Firefox, Netscape), you should set the default browser in the Java control panel. The following procedures instruct you in increasing the default heap size in the Java Control - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 39
Java plug-in configuration 1 FIGURE 3 Java Control Panel 3. In the section Java Applet Runtime Settings, apply your settings and close the Java Control Panel. Configuring the Java plug-in for Mozilla family browsers 1. From the Start menu, select Settings > Control Panel. 2. Click the Advanced tab - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 40
Mozilla family and click OK. 4. Click Apply to apply your settings and close the Java Control Panel. you that your fabric size exceeds the supported switch configuration limit and tells you how switches in the fabric that have lower or higher firmware versions. It is important to note that when - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 41
with a compatible Web browser installed. For a list of Web browsers compatible with Fabric OS 6.2.0, see Table 3. Web Tools supports both HTTP and HTTPS protocol procedure for smaller switches. See the EZSwitchSetup Administrator's Guide for information about the EZSwitchSetup interface. If you want - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 42
displays every time you access the switch. When you are presented with the login screen you must provide a user name and a password. Your home Admin Domain is automatically selected. You can choose to log into an when you open Web Tools again. 12 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 43
fabric. The following platforms support virtual fabrics: • Brocade DCX and DCX-4S • Brocade 5300 • Brocade 5100 1. Select Options to display the Virtual Fabric options. You are given a choice between Home Logical Fabric and User Specified Virtual Fabric (Figure 9). Home Logical Fabric is the default - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 44
to a logical fabric other than the home logical fabric, select User Specified Logical Fabric, type in the fabric ID number, and click OK. Logging in to an Admin Domain If you are logging in to a platform that is capable of supporting Admin Domains, the log in dialog box provides the option of - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 45
Opening Web Tools 1 FIGURE 10 Login dialog box with Admin Domain options If the user name or password is incorrect, a dialog box displays indicating an authentication failure. If you your home domain. FIGURE 11 Invalid Admin Domain dialog box Web Tools Administrator's Guide 15 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 46
• You initiate a firmware download from the Web Tools Based Access Control Role-Based Access Control (RBAC) defines the capabilities that a user account has securityadmin switchadmin zoneadmin fabricadmin basicswitchadmin user You have full access to can do except create new users. You have a subset - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 47
automatically ends if no information was sent to the switch for more than two hours. Because user key strokes are not sent to the switch until you apply or save the information, it and the Switch status windows open, you must manually close them. Web Tools Administrator's Guide 17 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 48
list provides requirements for Web Tools IPv6 support: • In a pure IPv6 environment, the IPv4 address to launch the switch. • Use a switch with v5.3.0 or higher firmware to manage a mixed fabric of IPv4 and IPv6 switches. • Switches running on version Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 49
clone operations for zoning, the EGM license must be installed on the switch; otherwise, access to this feature platforms, such as the Brocade DCX and DCX4S enterprise-class platforms, the Encryption Switch, the 300, You must use DCFM Professional or Enterprise Edition to print the zone database - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 50
EGM license must be installed on the switch; temperature, power, and fan data, beaconing, and the legend can perform management tasks, all access control is established when you first log user name with which you logged in to the switch, and the role associated with your user Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 51
table with Figure 12 to identify the areas of Switch Explorer. 1 Tasks and Fabric Tree 2 Menu bar 3 Switch View buttons 4 Changing the Virtual Fabric ID, or Changing the Admin Domain 5 Switch Events and Switch Information 6 Indicator bar 7 Professional Management Tool offering 8 Switch View Web - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 52
Generic port Zone Zone Admin Zone config Zone folder Status button - Healthy Status button - Marginal Status button - Critical Status button - Unmonitored 22 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 53
TABLE 5 Icon image changes (Continued) Image Name Old Image New Image Switch event - Fatal Switch event - Informational Switch event - Warning Refresh Enable Disable Prohibit Viewing Switch Explorer 2 Web Tools Administrator's Guide 23 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 54
fabric configuration server (FCS) switch. If the selected switch has a zoning license installed but is not the primary switch, the Zone Admin icon is displayed but not (present only on the base switch when the Virtual Fabrics capability is enabled. 24 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 55
display the IP address and current status. To manually refresh the status of a switch within the installed. Other switches must be managed through the Fabric OS command line interface (CLI) or another management application or by using DCFM Professional Edition or Enterprise Guide 25 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 56
. For most administrative tasks, you must be in either AD0 or the physical fabric. FIGURE 15 Login dialog with Admin Domain 26 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 57
to Switch Explorer. NOTE The Telnet window and the Fabric Details are not AD-filtered and do not need to be closed. Web Tools Administrator's Guide 27 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 58
21. NOTE In Switch View, for the Brocade 7500E Extension switch, the Model Type field distinguishes the 7500E from the 7500. Without the 7500E license installed, FC ports 2-15 are disabled. With the 7500E license installed, all the FC ports are enabled. 28 Web Tools Administrator - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 59
is connected and traffic is flowing. Ports that are not accessible do not display the port type and do not have borders. Web Tools Administrator's Guide 29 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 60
information. NOTE For detailed information on ISL Trunking, F_Port Trunking, and long distance, you must install the EGM license on the switch; otherwise access to these features is denied and an error message FIGURE 17 USB port storage management 30 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 61
use it with the Enhanced Group Management license to manage groups of switches, download firmware, manage security settings, and deploy configurations across groups of switches. Contact your preferred FIGURE 18 Professional Management tool offering Web Tools Administrator's Guide 31 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 62
you can hover over a switch to view its type, Ethernet IP, Fibre Channel IP, and status of the switch. In Switch View, you can tip so that you do not inadvertently display the port tool tips. Firmware versions and IP addressing are displayed for CP blades. When you hover over Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 63
• OS-Job Scheduling if you are using a host-system in the data center impacts the refresh rate. • JVM-Performance can contribute to causing interval (This feature requires the EGM license) Port Management FC Routing User-defined; 15 sec minimum 60 sec 15 sec 30 sec 's Guide 33 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 64
firmware, use the switches or directors with the latest firmware versions to control can be up to a few minutes. • Some data collection and processing operations in the iSCSI Gateway module of time (30-40 seconds) to collect and display data before taking any action or assuming the application is " - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 65
supports Telnet user credentials at the login prompt. 7. To close the session, type exit at the prompt. Collecting logs for troubleshooting If you encounter problems using the Web Tools interface, collect Java logs for use in troubleshooting. From Microsoft Windows, do the following: 1. Open Control - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 66
2 Collecting logs for troubleshooting 36 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 67
not a member of the selected Admin Domain, most tabs in the Switch Administration window display in read-only mode, regardless of your permission level. The User tab is editable because most of its information does not require switch membership in the current Admin Domain. Web Tools Administrator - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 68
Web Tools. The remainder of this section describes basic Switch Administration window procedures that are useful for many switch management operations. 40 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 69
. Note that when you click a different tab in the Switch Administration window, the information in the newly selected tab is automatically refreshed. Web Tools Administrator's Guide 41 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 70
configure the Ethernet IP interface. This includes the subnet mask, gateway IP address, or Fibre Channel IP interface, and subnet mask for your system. When you configure or change the chassis (eight per chassis, and eight per each installed CP). 42 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 71
to the appropriate log files or users, depending on the system configuration. When six servers are supported. See Fabric OS Administrator's Guide for more information service/destination port, protocol, and action as necessary. 7. Click OK. After you create a policy, you can use the controls - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 72
applies only to the Brocade 48000 and Brocade DCX and DCX-4S enterprise-class platforms. Enabling or disabling a blade 1. Open the Switch Administration 22 Blade tab The Firmware Version columns display the firmware loaded onto each blade. A blade can have more than one firmware image loaded onto it - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 73
the Blade tab. 3. Click Show IP Address. 4. Scroll through the list to view all the information. 5. When you are finished, click Close. Web Tools Administrator's Guide 45 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 74
is enabled, the maximum number of characters is 24. NOTE Some system messages identify a switch service by the chassis name. If you assign meaningful chassis names and switch names, system logs are in "Enabling and disabling a switch" on page 46. 46 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 75
the Switch Administration window as described on page 41. 2. Click Reboot. 3. On the Reboot Confirmation window, click Yes to continue. 4. Click Apply. Web Tools Administrator's Guide 47 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 76
configuration parameters: • Switch fabric settings • Virtual channel settings • Arbitrated loop parameters • System services • Signed firmware Configuring fabric settings 1. Open the Switch described in "Enabling and disabling a switch" on page 46. 48 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 77
Datafield size The largest possible data field size (in bytes). virtual channel ID is used in conjunction with a frame header to form the final virtual channel wide to transmit FICON data. Enabling insistent domain ID virtual channel settings You can configure parameters for eight virtual channels - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 78
on page 41. 2. Disable the switch as described on page 46. 3. Click the Configure tab. 4. Click the Virtual Channel subtab. 5. Type a value in the VC Priority field you want to change. Valid values for all fields are disable 0x00 as an AL_PA value. 50 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 79
feature management 3 Configuring system services You can enable or disable the Firmware subtab. 3. Select the Enable Signed Firmware Download check box. 4. Click Apply. Licensed feature management The licensed features currently installed on . Web Tools Administrator's Guide 51 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 80
copy data, or search the table. Activating a license on a switch Before you can unlock a licensed feature, you must obtain a license key. You can either use the license key provided in the paperpack document supplied with switch software or see the Fabric OS Administrator's Guide for instructions on - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 81
enterprise-class platforms. See the Fabric OS Administrator's Guide for additional information about High Availability. The High Availability window (see Figure 25 on page 54) displays information about the status of the HA feature on each control , the Synchronize Services and Initiate Failover - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 82
tabs: • The Service tab displays information about the switch. When the hardware is configured as a dual switch, the Service tab displays information about both switches. • The CP tab displays information about slot 5 and slot 6. In the Service tab - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 83
Status field displays Disruptive Failover Ready, continue with step 3. 3. Click Synchronize Services. The Warning dialog box displays. 4. Click Yes and wait for the CPs to complete a and all associated windows, and re-open Web Tools. Web Tools Administrator's Guide 55 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 84
Icon and Level Description Critical Critical-level messages indicate that the software has detected serious problems that will eventually cause a partial or complete failure of a subsystem if not corrected of each logical switch for convenience. 56 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 85
Filtering Switch Events You can filter the fabric and switch events by time, severity, message ID, and service. You can apply either one type of filter at a time or multiple types of filters at the Click Filter. The Event Filter dialog box appears. Web Tools Administrator's Guide 57 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 86
levels you want to display. 5. Click OK. The filter is enabled and the window is refreshed to show the filtered information. 58 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 87
Events" on page 56. 2. Click Filter. The Event Filter dialog box appears. 3. Check Service. The event service menu is enabled. 4. Select either Switch or Chassis from the menu to show only those the request node identification (RNID) information. Web Tools Administrator's Guide 59 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 88
a device from the Domain column. 3. Click Detail View. The Name Server Information dialog box displays the information specific to that device. 60 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 89
the LEDs glow across all the blades. 3. Look at the physical switches in your installation location to identify the switch. Locating logical switches using chassis beaconing Use the Chassis Beacon the blades associated with the logical switch. Web Tools Administrator's Guide 61 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 90
and management is done from either the Data Center Management Program (DCFM), or the Fabric OS command line interface. For information about configuring and managing Virtual Fabrics, refer to the DCFM User Manual if you are using DCFM, or Fabric OS Administrator's Guide if you are using the Fabric - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 91
Virtual Fabrics overview 3 Selecting a logical switch from the Switch View You can log in to a specific logical switch, as described in Chapter associated with fabric ID 2. Note that the Logical Switch selector is relocated above the Switch View. Web Tools Administrator's Guide 63 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 92
, fabric ID 2. Under System Information, Base Switch, Default Switch, and Allow XISL Use are specific to VIrtual Fabrics: • Base Switch indicates whether or not the logical switch can act as a base switch. A (XISL). Only base switches may use XISLs. 64 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 93
Virtual Fabrics overview 3 Viewing Logical ports When the logical switches. Logical ports are created in the respective switches to support the logical link. Logical ports are software constructs, and have no corresponding Logical port properties Web Tools Administrator's Guide 65 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 94
3 Virtual Fabrics overview 66 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 95
Domain configuration maintenance 71 •Uploading and downloading from USB storage 72 •Performing a firmware download 73 •Switch configurations for mixed fabrics 76 Creating a configuration backup file Keep as the source of the configuration file. Web Tools Administrator's Guide 67 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 96
the Host Name or IP field, the user ID and password required for access to the host in the User Name and Password fields, and choose the you choose "Secure Copy Protocol (SCP)," you cannot specify "anonymous" in the User Name field. If you choose USB as the configuration file source, the network - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 97
the logical switch from which the configuration file is to uploaded. The selector will show all the virtual fabric IDs that have been defined, the default of 128 for the physical switch, chassis level the source of the configuration file. Web Tools Administrator's Guide 69 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 98
the Host Name or IP field, the user ID and password required for access to the host in the User Name and Password fields, and choose the you choose "Secure Copy Protocol (SCP)," you cannot specify "anonymous" in the User Name field. 7. If you choose USB as the configuration file source, the network - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 99
which the configuration file is to downloaded. The selector will show all the virtual fabric IDs that have been defined, the default of 128 for the have the admin domain of AD255 or AD0, if no other user-defined Admin Domains exist. A config upload/download gathers all the Guide 71 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 100
to change Admin Domain context requires installing the EGM license. Refer to "Changing the Admin Domain context" on page 26 for complete instructions. The EGM license is required only for 8 Gbps platforms, such as the Brocade DCX and DCX-4S enterprise-class platforms, the Encryption Switch, the - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 101
installed and activated on the switch. You must close all of the Web Tools windows and log in again to avoid a firmware and re-log in. When you request a firmware download, the system first checks the file size contact your switch support supplier. NOTE You can perform a firmware download only when - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 102
in the Protocol Type field. If you choose "Secure Copy Protocol (SCP)," you cannot specify "anonymous" in the User field. 7. Click Apply. The firmware download begins. You can monitor the progress by looking at the Firmware Download progress bar. 74 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 103
you can continue to monitor its progress. Encryption firmware download If you have an FS8-18 blade installed, you must remove the blade if you want area appears on the Firmware Download tab to show application firmware information. NOTE SAS firmware download is not supported on the Brocade Encryption - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 104
for mixed fabrics FIGURE 39 Firmware Download tab for bladed switches Domain ID only accepts 1-31. When you turn on McDATA Open Fabric Mode, which supports M-EOS switches v9.6.2 and higher, the following features are not available: • Admin . 76 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 105
you choose. The domain ranges are: • The normal domain ID range is 1-239. • The McDATA Fabric mode supports domain ID range of 1-31. • The Open Fabric mode range is 97-131. • Before making changes to the mode and click Apply. 5. Enable the switch. Web Tools Administrator's Guide 77 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 106
4 Switch configurations for mixed fabrics 78 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 107
of switchadmin, admin, basicswitchadmin, operator, or fabricadmin. If you are logged in with a user, securityadmin, or zoneadmin role, you can only view the port information. Opening the Port Administration for information about accessible ports. Web Tools Administrator's Guide 79 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 108
Show Advanced Mode button in the upper-right corner of the window to see more port management options (see Figure 42). 80 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 109
FIGURE 42 Port Administration window, FC Ports, Advanced Mode Admin Domain considerations In fabrics with user-defined Admin Domains, the Port Administration window is filtered to show only ports that are ports, the GigE Ports tab does not appear. Web Tools Administrator's Guide 81 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 110
accumulated statistics of all the FCIP tunnels for that GbE port. - IP Interfaces-GbE ports only - IP Routes-GbE ports only 82 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 111
the current Admin Domain, if your role gives you Modify permission for ports. If a port is controllable, all configuration functionality is enabled. Ports on a non-owned switch that are not E_Ports and are in the Port Administration window. Web Tools Administrator's Guide 83 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 112
displays. FIGURE 44 Missing EGM license The EGM license is required only for 8 Gbps platforms, such as the Brocade DCX and DCX-4S enterprise-class platforms, the Encryption Switch, the 300, 5300, and 5100 switches. For non-8 Gbps platforms, all functionalities are available without EGM license. 84 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 113
select the check box, the disabled port is automatically enabled after configuration; otherwise, the port remains in the same state after configuration. Web Tools Administrator's Guide 85 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 114
an E_Port and L_Port. NOTE To configure a port as an EX_Port, the switch must be capable of supporting FCR/FCIP features. The EX_Port option is disabled in the wizard if the switch does not meet these Extended Fabrics". FIGURE 46 Missing EGM license 86 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 115
-trip times required to write data. FC Fastwrite is a available as a feature on the 7500 and 7500E Extension switches and Brocade 48000 and Brocade DCX and DCX-4S enterprise-class platforms with FR4-18i cannot select multiple ports from the tree. Web Tools Administrator's Guide 87 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 116
you cannot enable it until you install the appropriate license, such as a Ports on Demand or N_Port ID Virtualization license (see "Port activation" on the fabric. For more information, see the Fabric OS Administrator's Guide. Persistent enabling and disabling ports Use the following procedure to - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 117
The NPIV license must be installed on a switch before NPIV functionality can be enabled on any port. NOTE NPIV enable/disable is not supported on EX_Ports. NPIV is supported on all ports on the Brocade FS-8-18 Encryption blade and Encryption Switch with a maximum of 255 virtual devices per port for - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 118
, see the Fabric OS Administrator's Guide. In the Port Administration window, instructions to generate the key. Enabling Ports on Demand 1. Install the Brocade Ports on Demand licensed product. For instructions feature. NOTE The Dynamic PODs feature is supported on the Brocade 4018, 4020, and 4024 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 119
to the ports if the switch is a member of the current Admin Domain. The Dynamic PODs feature is supported on the Brocade 4018, 4020, and 4024 switches only. You must disable the port or switch before License field contains the value Possible. Web Tools Administrator's Guide 91 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 120
one port to another (swap ports) without changing the I/O Configuration Data Set (IOCDS) on the mainframe computer. When you perform a swaps the area IDs, and enables the ports. NOTE Port swapping is supported on the Brocade Encryption Switch and the FS8-18 Encryption blade. Port Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 121
Port swapping index 5 FIGURE 47 Port Swapping Index Web Tools Administrator's Guide 93 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 122
5 Port swapping index 94 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 123
between 0 and 255. NOTE ADs and Virtual Fabrics are mutually exclusive. Virtual Fabrics must be disabled if you want supported on fabrics with switches running Fabric OS v5.2.0 or higher. • To manage Admin Domains, you must be a physical fabric administrator. A physical fabric administrator is a user - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 124
user-defined Admin Domains. These user user-defined Admin Domains), it to any user-defined Admin v5.2.0 or higher. Unlike user-defined Admin Domains, AD0 user-defined Admin Domain. The only difference between AD0 and user AD255 or physical fabric AD255 is a virtual domain that contains all devices, switches - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 125
The EGM license is required only for 8 Gbps platforms, such as the Brocade DCX and DCX-4S enterprise-class platforms, the Encryption Switch, the 300, 5300, and 5100 switches. For non8 Gbps platforms, created. Indirect port members cannot be zoned. Web Tools Administrator's Guide 97 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 126
Figure 49. If you are not using Web Tools with the EGM licensed installed, managing Admin Domain operations is denied and the following error message displays. for 8 Gbps platforms, such as the Brocade DCX and DCX-4S enterprise-class platforms, the Encryption Switch, the 300, 5300, and 5100 switches - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 127
detailed view displays summary information as well as information about the online switch, port, and device members of the selected Admin Domain. Web Tools Administrator's Guide 99 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 128
to enable the functionality of Export and Copy. • Click Export to save the contents of the table to a tab-delimited file. 100 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 129
at any time. 1. In the Admin Domain window, click Refresh. The status for the fabric, including switches, ports, and devices is refreshed. Web Tools Administrator's Guide 101 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 130
refresh the Admin Domain information at any time to reflect changes that might have been made by other users or to back out of current, unsaved work and start again. ATTENTION When you refresh the buffered Admin Domain changes" on page 102). 102 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 131
administer the Admin Domains, even if no other users are assigned (see "Changing user account parameters" on page 220). When you Domain that was deactivated. The following procedures provide detailed instructions for creating an Admin Domain and for activating or deactivating Guide 103 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 132
you must do it from the Manual button, which launches the Add Member wizard. FIGURE 53 Adding members to an Admin Domain NOTE The tree only displays two FC ports and all logical ports if the 7500E upgrade license is not installed. 8. Click Next. 104 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 133
configuration. Adding ports or switches to the fabric 1. From the Create Admin Domain wizard, click Manual. The Add Member window displays. FIGURE 55 Add Member wizard 2. Select Port and enter the , and then click OK to accept the changes. Web Tools Administrator's Guide 105 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 134
left, select the Admin Domain you want to modify. 3. Click Modify. The Modify Admin Domain wizard opens on the Membership step. 106 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 135
and click Add Devices to add all of the devices for the selected element. Optional: Click Manual to add offline switches and devices. 5. Remove members from the Admin Domain by selecting them in Domain configuration as the effective configuration. Web Tools Administrator's Guide 107 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 136
Domain configuration When you clear the Admin Domain configuration, all user-defined Admin Domains are deleted and all fabric resources ( clear the Admin Domain configuration if zone configurations exist in any of the user-defined Admin Domains. 1. Open the Admin Domain window. 2. Click Actions - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 137
trunk. For details on obtaining and installing licensed features, see "Licensed feature management ISL Trunking, see the Fabric OS Administrator's Guide. You must use Web Tools with the EGM for 8 Gbps platforms, such as the Brocade DCX enterprise-class platform, the Encryption Switch, the 300, 5300 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 138
procedure to disable trunking on a port or to re-enable trunking if it has been disabled. Trunking is not supported on logical ports, GbE ports, or EX_Ports. 1. Click a port in the Switch View to open the configured in physical fabric/255 mode. 112 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 139
port state, either master or slave. • Trunk master port (does not apply to F_Port trunking). • Trunk index (applies only to F_Port trunking). Web Tools Administrator's Guide 113 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 140
F_Port trunking: • The F_Port trunking feature requires installing the EGM license; otherwise if you attempt NOTE If F_Port trunking is configured, a firmware downgrade is not allowed. Creating and maintaining F_Port trunk groups User this procedure to create an F_Port trunk 's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 141
Members. To remove a port from the trunk group, select the port and then select Remove Members. 9. Click OK when you are finished. Web Tools Administrator's Guide 115 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 142
7 F_Port trunk groups 116 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 143
Brocade DCX and DCX-4S enterprise-class platforms, the Encryption Switch Domain context. Only users with the admin data across reboots). The Advanced Monitoring menu in Performance Monitor is an optionally licensed feature. To utilize the Advanced Monitoring feature you must have a license installed - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 144
to track the following: • The number of words received and transmitted in Fibre Channel frames with a defined SID/ DID pair. • The number of times you define a user with a switchadmin role and give that user access to AD255 for the purpose of data collecting using the 's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 145
48000 and Brocade DCX and DCX-4S enterprise-class platforms, this graph displays the CRC a specific LUN. For more information, see "Creating SCSI command graphs" on page 127. The Brocade Encryption support the logical FC ports and GbE ports. Web Tools Administrator's Guide 119 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 146
SCSI Commands P SCSI vs. IP Traffic P 1. Blade Aggregate Throughput graph is supported only on the Brocade 48000 and Brocade DCX and DCX-4S enterprise 48000 and Brocade DCX and DCX-4S enterprise-class platforms, the X-axis scales up Virtual ports on logical switches cannot be graphed. - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 147
installed. Note that the slot number is identified. FIGURE 61 Accessing performance graphs User on page 123 for more information). These user-defined graphs can be added and saved The graphs can be either the Web Tools predefined graphs or user-defined graphs. Each canvas can hold up to eight graphs - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 148
monitor graphs listed in Table 10 on page 119. 1. Open the Performance Monitor window. 2. Click Performance Graphs > Basic Monitoring > Graph Type. 122 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 149
monitor graph 3. If prompted, drag the port into the Enter/drag slot,port field, or manually type the slot and port information in the field, in the format slot,port. For . For the Brocade 48000 and Brocade DCX and DCX-4S enterprise-class platforms, you can also customize these graphs to display - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 150
Creating basic performance monitor graphs" on page 123 for instructions on creating a graph. 2. For Brocade 48000 and Brocade DCX and DCX-4S enterprise-class platforms, display detailed port throughput utilization rates to select multiple ports. 124 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 151
graphs are not supported for GbE ports. NOTE You must have an Advanced Performance Monitoring license installed to use the Advance Performance Monitor features. If user-defined Admin Domains the port, Source ID and Domain ID, skip to step 4. Web Tools Administrator's Guide 125 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 152
want to save the monitor. If you click OK, the monitor is saved, and will persist if the switch is rebooted. 126 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 153
enterprise-class platforms, the slot and port name are identified in the graph. In a trunk group, the SCSI > SCSI vs. IP Traffic. The SCSI vs. SCSI vs. IP Traffic Setup dialog box. Only the selected ports are displayed in the SCSI vs. IP traffic graph. Creating SCSI SCSI Commands > Graph Type. The - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 154
8 Saving graphs to a canvas FIGURE 66 Creating a SCSI command graph 3. Navigate to a switch > slot > port in the Slot/Port Selection List. 4. Click the A message displays, confirming that the configuration was successfully saved to the switch. 128 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 155
the list and click Edit. The Performance Monitor Canvas: Canvas Name dialog box displays. 4. Select a graph from the list and click Edit. Web Tools Administrator's Guide 129 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 156
Save to save the changes and close the Performance Monitor Canvas dialog box. 8. Click Close to close the Canvas Configuration List. 130 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 157
features that are no longer supported in Web Tools, but are supported in DCFM Professional and Enterprise Edition. . TABLE 13 Zoning features supported in DCFM Professional and Enterprise Edition Description DCFM Professional Edition DCFM Enterprise Edition Member selection yes yes Zone - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 158
supported in DCFM Professional and Enterprise Edition Description DCFM Professional Edition DCFM Enterprise controlling traffic rather than partitioning access to storage. LSAN zone requirements An LSAN enables device connectivity between fabrics connected in fibre channel Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 159
of Service (QoS virtual circuits, 60% of available bandwidth Four virtual circuits, 40% of available bandwidth Two virtual supports default zoning on switches running firmware v5.1.0 or higher. Default zoning on legacy switches (switches running firmware versions prior to v 5.1.0) are not supported - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 160
Zoning license installed, but is switch using a user name with one of Virtual Fabric ID you selected are displayed in the member selection list. You can use the Add Other button to add ports of other switches in the fabric. FIGURE 67 Zone Administration window 134 Web Tools Administrator's Guide - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 161
Enterprise Edition to analyze zone configurations. The Member Selection List displays virtual Virtual Initiators. If the chassis has the Brocade 7500E Extended Switch license installed without the extended license installed. Admin Domain considerations user- defined Admin Domains are present on the switch, - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 162
status for the fabric, including switches, ports, and devices. NOTE Depending on the role associated with your user name or if the switch is owned by the current Admin Domain you are logged in to, you may . Any unsaved zoning changes are deleted. 136 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 163
are buffered until you save the changes. That means that any other user looking at the zone information for the switch will not see the imported physical devices (by WWN), and a list of the FC Virtual Initiators on switches that support iSCSI. In the Fabric View, you can select ports for port - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 164
modified in the Zone Admin buffer. At this point you can either save your changes or save and enable your changes. 138 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 165
changes. 6. Click Zoning Action > Save Config to save the configuration changes. To enable the configuration, see "Enabling zone configurations" on page 145. Web Tools Administrator's Guide 139 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 166
you want to include in your zone, or highlight an element in the Zone Members list that you want to delete. 140 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 167
NOTE To perform clone operations for zoning, the EGM license must be installed on the switch; otherwise, access to this feature is denied and for 8 Gbps platforms, such as the Brocade DCX and DCX-4S enterprise-class platforms, the Encryption Switch, the 300, 5300, and 5100 Guide 141 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 168
are finished, click OK. You return to the Traffic Isolations Zones view. 9. Click Apply to save the traffic isolation zone configuration. 142 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 169
page 133. 2. Select a format to display zoning members in the Member Selection List as described in "Select a zoning view" on page 137. Web Tools Administrator's Guide 143 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 170
page 133. 2. Click the Zone Config tab. 3. Select the configuration you want to rename from the Name list and click Rename. 144 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 171
database size exceeds the maximum allowed, you cannot enable the zone configuration. The zoning database summary displays the maximum zoning database size. Web Tools Administrator's Guide 145 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 172
is displayed to that effect. NOTE The enabled configuration is listed in the lower-right corner of the Zone Administration window. 146 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 173
Administration window is identified in the lower-right corner. It is also updated if you manually refresh the Zone Administration window contents by clicking the refresh icon at the lower-right corner no active zoning configuration on the switch. Web Tools Administrator's Guide 147 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 174
. This launches the print dialog box. NOTE You must use DCFM Professional or Enterprise Edition to print the zone database summary configurations, display zone configuration summaries and create Edit > Replace WWN. The Replace WWN dialog box opens. 148 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 175
133. 2. Click Actions > Clear All. The Disable Config warning opens. 3. Click Yes to do all of the following: • Disable the current configuration. Web Tools Administrator's Guide 149 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 176
already named and are not displayed. Zone configuration analysis You must use DCFM Professional or Enterprise Edition to analyze the following zone configurations: • Add unzoned devices • Remove offline bringing up Web Tools (the proxy switch). 150 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 177
Brocade switch. The dump can be used by developers and troubleshooters at Brocade to help understand what might be contributing to a trace dump." A trace dump is generated when: • It is triggered manually (use the traceDump command). • A critical-level LOG message occurs. • Guide 151 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 178
occurs you can provide your customer support representative with the most detailed information possible. To ensure the best service, you should set up for automatic transfer as part of standard switch configuration, before a problem occurs. 152 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 179
name. The password is optional if you log in as an anonymous user. 5. Click Apply. Enabling automatic transfer of trace dumps You can If automatic uploading of a trace dump is disabled, you must manually upload the trace dump or else the information is overwritten when a Guide 153 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 180
appropriate hardware documentation. You can display status information about the fans, as shown in Figure 72. FIGURE 72 Fan States window 154 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 181
indicates the overall status of the power supply status. For more information regarding switch power modules, refer to the appropriate hardware documentation. Web Tools Administrator's Guide 155 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 182
of the switch. The icon on the button displays the real-time status of the switch. If no data is available from a switch, the most recent background color remains displayed. For all statuses that are based displayed in the Switch Information view. 156 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 183
cursor on the Action bar (see Figure 76) and click an action to: • Refresh the information displayed in the report • Customize the report • View the data in raw XML format Web Tools Administrator's Guide 157 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 184
10 Port LED interpretation • View the style sheet for the report • View the XML schema for the report FIGURE 76 Switch Report Action menu Port LED interpretation switches and port blades do not have port speed LEDs, but only port status LEDs. 158 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 185
on the physical blade. Figure 78 on page 160 compares the LEDs on the physical port card and the Web Tools display. Web Tools Administrator's Guide 159 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 186
4. Port Status LED for the left port FIGURE 78 Port LEDs for the FC4-32 port blade in the Brocade 48000 160 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 187
tape drives across multiple fabrics without the administrative problems, such as change management, network management, scalability, reliability, availability, and serviceability that might result from merging the fabrics. Fibre Channel routing lets you create logical storage area networks (LSANs - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 188
Supported switches for Fibre Channel routing The FC-FC Routing Service is supported only on the following switch models: • Brocade 5100 and 5300 switches, and the 7500 and 7500E Extension Switches. • Brocade 48000 director, when configured with an FR4-18i blade. • Brocade DCX and DCX-4S enterprise - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 189
instructions perform Fibre Channel routing described in "Fibre Channel routing overview" user, zoneadmin, or securityadmin, you can only view the data. If the FC-FC Routing service enterprise-class platforms, when configured with FR4-18i, FR8-16, FR8-32, or FR8-48 blades. NOTE When the Virtual - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 190
LSAN Fabric in the task bar. A browser window is launched with the following url: http://ip-address-of-lsan-fabric-switch 164 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 191
• Edit an EX_Ports configuration • Rename an EX_Port • Swap the Port Index of an EX_Port (described in "Port swapping index" on page 92) Web Tools Administrator's Guide 165 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 192
as an EX_Port; otherwise, the two fabrics merge and you lose the benefit of Fibre Channel routing. You can enable or disable multiple ports at one time. Use Shift-click This opens the port configuration wizard, which guides you through the port configuration process. 166 Web Tools Administrator - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 193
FCR router port cost 11 4. Follow the instructions in the wizard to configure the EX_Port. You 4. Click Edit Configuration in the task bar. This opens the port configuration wizard, which guides you through the port configuration process. The current configuration values are displayed in the wizard - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 194
more detailed information about a specific device, as shown in Figure 82. FIGURE 82 FC Routing module with LSAN Devices tab selected 168 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 195
you invoke this operation. After the fabric ID is changed, you can enable these ports again manually. The fabric ID for a backbone fabric must be different from the fabric IDs of all Web Tools automatically re-enables the FC-FC Routing Service. Web Tools Administrator's Guide 169 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 196
11 Configuring the backbone fabric ID 170 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 197
is compatible with different types of fabrics, including Brocade Enterprise OS (EOS), and Cisco-based fabrics. When the Access Gateway, see Brocade Access Gateway Administrator's Guide. NOTE When Access Gateway mode is enabled on unavailable, and fabric-related service requests are forwarded to the - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 198
view can be customized. 1. Click Access Gateway Devices in the Monitor section under Tasks. The Access Gateway Device Display window opens. 172 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 199
automatically based on device and switch connections and internal load-balancing and grouping; user controls are disabled. When you configure ports, perform the tasks in the following order prevents failover of F_Ports across N_Port groups. Web Tools Administrator's Guide 173 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 200
Edit a port group • Delete a port group 4. Make the appropriate changes and click Close. Defining custom primary and secondary mapping You can also manually change port mappings. 1. Click a port in the Switch View to open the Port Administration window. 2. Click the FC Ports tab. 3. Click Configure - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 201
F_Port failover is to any online N_Port. 6. After you have made the appropriate changes, click Save. Access Gateway policy modification Although you can control a number of policies on switches in Access Gateway mode, Web Tools only provides the ability to enable and disable the policies. For more - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 202
open the Port Administration window. 2. Click the Port Configuration Policy menu and select Automatic. FIGURE 87 Port Administration window, enabling APC 176 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 203
3. Click Yes in the confirmation window. Access Gateway policy modification 12 Web Tools Administrator's Guide 177 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 204
12 Access Gateway policy modification 178 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 205
Watch can automatically alert you when problems arise, before they become costly , you must have a Fabric Watch license installed on the switch. Fabric Watch tracks a well as operational values for supported models of Finisar "Smart" Guide. Web Tools Administrator's Guide 177 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 206
(configure threshold boundaries). • Configure Fabric Watch to alert you to errant values. • Configure Fabric Watch to identify unacceptable values (threshold traits). 178 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 207
zone used in event-setting comparisons 1. Click Fabric Watch in the Manage section of the Tasks menu. 2. Click the Threshold Configuration tab. Web Tools Administrator's Guide 179 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 208
in the High Boundary field. 10. Type the size of the buffer zone in the Buffer Size field. 11. Click Apply. 180 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 209
by Fabric Watch for that switch; not all alarm options are available for all switches. For more information, see the Fabric Watch Administrator's Guide. 3. Click the Threshold Configuration tab. 4. Under Area Selection, choose the area with the alarms that you want to enable or disable. 5. Click the - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 210
to apply the changes to the switch. 8. Click OK in the confirmation dialog box to save the changes to the switch. 182 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 211
Value Time The string assigned to the element that had an event The current state of the element The event type that was triggered The data value of the element when the event was triggered The current data value of the element Time when the event occurred Web Tools Administrator - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 212
select the area that you want to check for alarms from the list. All alarms for that area display. For troubleshooting responses to alarms, see the Fabric Watch Administrator's Guide. E-mail notification You can be notified of an alarm condition through an e-mail alert. If you have configured alarms - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 213
is working correctly. You can send a test e-mail only after you have applied your settings. FIGURE 90 Fabric Watch Email Configuration tab Web Tools Administrator's Guide 185 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 214
13 E-mail notification 186 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 215
platforms, such as the Brocade DCX and DCX-4S enterprise-class platforms, the Encryption Switch, the 300, 5300 extended fabrics, see the Fabric OS Administrator's Guide. The Extended Fabric tab displays the following lack of buffers. Buffer-limited operation is supported for the LS and LD extended ISL - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 216
license. FIGURE 91 Extended Fabric tab For Brocade DCX and DCX-4S enterprise-class platforms, the slots for CP are not available. You can view license. The Brocade Encryption Switch and the FS8-18 Encryption blade support auto-negotiated link speeds of 1, 2, 4, and 8 Gbps. The GE - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 217
Required? L0 No long-distance setting is enabled. The maximum supported link distance is No 10 km, 5 km, or This step is switch-specific: For Brocade DCX and Brocade 48000 enterprise-class platforms, click the slot subtab that corresponds to the correct Administrator's Guide 189 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 218
port operates in buffer-limited mode. c. Press Enter or click another port entry for the value to be accepted. 6. Click Apply. 190 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 219
•iSCSI service overview 191 •Supported platforms for iSCSI 192 •Setting up iSCSI Target Gateway Services 194 •Discovery Domain management 202 •Discovery domain sets (DDSet 205 •CHAP Configuration 206 •iSCSI Fibre Channel Zone configuration 208 •Managing and Troubleshooting Accessibility 210 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 220
platforms for iSCSI The iSCSI target gateway service is supported on the Brocade 48000 director with CP blades running Fabric OS v5.2.0 and later releases, and configured with in the table, the text appears in red color. FIGURE 92 Search screen 192 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 221
services terminology Term Definition iSCSI iSCSI target gateway iSCSI port iSCSI virtual target Internet-SCSI. A transport carrier of the SCSI protocol over IP. An intermediate device in the network that allows the iSCSI initiators in an IP SAN to access and utilize storage in a Fibre Channel - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 222
is restored to the last saved data point. • Clear All-The Clear virtual targets, iSCSI initiators, discovery domains, discovery domain sets, and all CHAP users services. The iSCSI Setup wizard guides you through the steps to set up iSCSI connectivity between IP networks and your Fibre Channel - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 223
Gateway Services 15 FIGURE 93 iSCSI Target Gateway Admin with the Targets tab selected 1. Select a switch from the Fabric Tree and log in, if necessary. The selected switch appears in Switch View. Make sure that your Admin Domain Context is either AD0 or AD255. Generally, the default user Admin - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 224
disabled. If a switch has iSCSI disabled or there is no iSCSI virtual target created, Web Tools assumes that iSCSI is not activated. 1. Ensure . 4. Click Apply. Encryption Services for the iSCSI Gateway Data-At-Rest encryption services for the iSCSI hosts is supported for the Encryption Switch and - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 225
Setting up iSCSI Target Gateway Services 15 Configuring the IP interface This step configures iSCSI ports (GbE Ports) found on the FC4-16IP. You must have is optional because when an IP address is set up, a route is automatically set up as well. Web Tools Administrator's Guide 197 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 226
15 Setting up iSCSI Target Gateway Services 1. Open iSCSI Target Gateway Admin as described on page 194. 2. Select the iSCSI Port tab. 3. In the left pane, select the IP address for this interface, as there can be only one IP address per interface. 198 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 227
Setting up iSCSI Target Gateway Services 15 Configuring the IP route (optional) 1. Launch the iSCSI Target Gateway Admin module as described on page 194. 2. other than the metric, you must delete this route and create another in its place. Web Tools Administrator's Guide 199 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 228
Services Creating iSCSI virtual targets SCSI virtual target creation is done from the first pane in the iSCSI Target Gateway Admin module. The iSCSI Virtual The text field displays the value "iqn" and you must enter the remaining data. 5. Click Add LUNs. 6. On LUN Addition Dialog, select LUNs to add - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 229
Services 15 Using Easy Create to create iSCSI virtual targets Easy Create is an alternative method for creating iSCSI virtual FIGURE 98 Easy VT Creation Dialog 4. Follow the instructions in the wizard to create a virtual target in iSCSI. The wizard is self-explanatory Guide 201 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 230
instructions in the wizard to edit an iSCSI virtual target. The wizard is self-explanatory, so the individual steps are not described in this document. NOTE The Remove LUN(s) button is available only for virtual targets that are fully initialized as a target. Searching for a specific Fibre Channel - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 231
sets for managing iSCSI device access control. The Discovery Domains pane displays all a discovery domain object, you can edit or delete the data contained in the object. Discovery domains are placed in a virtual targets, iSCSI initiators, or both. Web Tools Administrator's Guide 203 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 232
on page 194. 2. Select the Discovery Domains tab. 3. Click Create DD. The Create DD wizard opens. FIGURE 101 Create DD wizard 4. Follow the instructions in the wizard to create an iSCSI discovery domain. The wizard is self-explanatory, so the individual steps are not described in this document - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 233
access. (This functionality is similar to Fibre Channel zoning.) Use the Discovery Domains tab to view and manage access from iSCSI initiators to iSCSI virtual targets. The DD view displays all DDSets Create DDSet. The Create DDSet wizard opens. Web Tools Administrator's Guide 205 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 234
Follow the instructions in the virtual target through the Microsoft iSCSI Initiator. You can create, view, and change CHAP users and their associated secrets. After a CHAP user user name and chap secret in encrypted format (*). You can add, delete, or modify CHAP entries. Each CHAP secret has: • User - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 235
194. 2. Select the CHAP tab. 3. Click Create. 4. Enter the CHAP user name. Optional: To add more than one user at a time, click Add. 5. Enter a CHAP secret and click Apply the CHAP secret, but not the CHAP user name. 4. Fill in the fields in the dialog box to edit a CHAP secret. Web Tools - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 236
. 3. Click Bind/Remove Chap(s). 4. Select a virtual target. 5. Enter a new CHAP user, if necessary. 6. Select the CHAP users and click Add or Remove to move them into the appropriate list (unassociated or associated CHAP users). 7. Click Apply. iSCSI Fibre Channel Zone configuration After you have - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 237
Fibre Channel . Creating an iSCSI Fibre Channel zone with an effective non-effective configuration, the iSCSI Fibre Channel zone is added into that You must add the iSCSI Fibre Channel zone to the effective effective configuration, the iSCSI Fibre Channel zone is added into iSCSI Fibre Channel zoning - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 238
and re-enabled. Managing and Troubleshooting Accessibility The Web Tools iSCSI Fibre Channel zone has been set up and, if appropriate, enable the defined configuration. See "Creating an iSCSI Fibre Channel zone with an effective zone configuration" on page 209. 210 Web Tools Administrator's Guide - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 239
be installed on the switch; otherwise, access to these features is denied and an error message displays. For Fabric OS 6.2.0, the supported routing path based on current traffic conditions. See the Fabric OS Administrator's Guide for more information. To optimize port-based routing, the DSL can - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 240
Routing tab. 3. This step is switch-type specific: For the Brocade 48000 and Brocade DCX and DCX-4S enterprise-class platforms, click a slot number under the FSPF Route category in the navigation tree. For Brocade 200E, and cannot be disabled. 212 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 241
changes. However, if the fabric contains destination devices that do not support out-of-order delivery, you can force in-order frame delivery across . For more information regarding IOD, see the Fabric OS Administrator's Guide. NOTE Enabling in-order delivery can cause a delay in the establishment - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 242
Click the Routing tab. 3. This step is switch-specific: For the Brocade 48000 and Brocade DCX, enterprise-class platforms, click the slot number of the logical switch under Link Cost in the navigation tree. For value for that port. 6. Click Apply. 214 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 243
Virtual Fabrics and Admin Domains are mutually exclusive. Access rights for any user session are determined both by the user's role-based access rights. See Chapter 1, "Introducing Web Tools" for additional information about Role-Based Access Control (RBAC). Web Tools Administrator's Guide 215 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 244
predefined or userdefined accounts basicswitchadmin user Change your own password accounts Virtual Fabrics considerations If no home logical fabric ID is specified for a user, the user has access to AD0 only. If some Admin Domains were defined for the user and all of them are inactive, the user - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 245
window as described on page 41. 2. Click the User tab. 3. Click Add. The Add User Account dialog box opens. For switches that support Virtual Fabrics, refer to Figure 107. For switches that support Administrative Domains (AD), refer to Figure 108. Web Tools Administrator's Guide 217 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 246
17 User-defined accounts FIGURE 107 Add User Account dialog box (VF) FIGURE 108 Add User Account dialog box (AD) 218 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 247
-Based Access Control" on page Virtual Fabrics or Admin Domains that the user can access. For Virtual User tab, click Apply to apply your changes. Deleting user-defined accounts 1. Open the Switch Administration window as described on page 41. 2. Click the User tab. Web Tools Administrator's Guide - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 248
user user name of the account using this procedure. To change the user name, you must delete the account and create a new account. Users can select their own accounts in the user User user User Account dialog box displays. 5. Select a role from the menu. You can change the role only on user user user user - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 249
the password of an account 1. Open the Switch Administration window as described on page 41. 2. Click the User tab. 3. Select the account to modify. If you are logged in as admin, you can change the Click OK. 9. Click Apply to save your changes. Web Tools Administrator's Guide 221 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 250
window as described on page 41. 2. Click the User tab. 3. Click Set Password Rule. The Configure 99999 minutes) • Number of days to warn user before password expiration (0-999) 5. Choose whether If you choose to disable the lockout administration, the user is never locked out of the system. 6. Click - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 251
window as described on page 41. 2. Click the User tab. 3. Select the account. 4. Click Expire Administration window as described on page 41. 2. Click the User tab. 3. Select the account. 4. Click Unlock Password logical fabrics You can display user role assignments for logical fabrics. 1. Open - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 252
17 User-defined accounts The Role Mapping for that user is displayed (Figure 110). FIGURE 110 Role Mapping (Virtual Fabrics) 224 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 253
control list policy configuration Support for the Access Control List (ACL) policies is currently defined in the Switch Connection Control (SCC) and Device Connection Control DCC/FCS policy configuration Virtual Fabrics considerations ACL user-defined Admin Domains. Both AD0 (when no other user - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 254
17 Access control list policy configuration Creating an SCC, DCC, or FCS policy You can create the FCS policy only once. 1. Open the policy in order to implement it. See "Activating an SCC, DCC, or FCS policy" on page 227, for instructions. 226 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 255
Access control list policy configuration 17 Editing an SCC, DCC, or FCS policy 1. Open the Switch Administration window as described on page distribute it to the remaining fabric: To deactivate a policy, you must activate a new or empty policy. Web Tools Administrator's Guide 227 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 256
17 Access control list policy configuration Distributing an FCS policy You must perform this procedure to distribute an FCS policy. 1. Open the from and to positions. 6. Click Apply. After you move all the member switches, click Apply and Close. 228 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 257
function (like SHA or MD5)is used for authentication. Off The switch does not support authentication. Any authentication negotiation is rejected. 6. Select a DH-Group type. 7. Optionally 5. Choose whether the is off or passive. 6. Click Apply. Web Tools Administrator's Guide 229 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 258
switches. The switch initiating the distribution must accept distribution. Re-authenticating policies A user who has changed authentication policy parameters or a shared secret key pair can reinitialize the Shared Secret Keys subtab. 5. Click Add. 230 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 259
Security Policies tab. 3. Click Authentication on the Security Policies menu. 4. Use the Switch Policy Authentication Mode selector to choose the authentication policy. Web Tools Administrator's Guide 231 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 260
SNMPv1 and SNMPv3 sections. The level you select identifies the minimum event level that will prompt a trap. NOTE Adding or editing the user name can be done only through the CLI and by selecting a user name from the User Name menu in the SNMPv3 section. 4. Click Apply. 232 Web Tools Administrator - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 261
SNMP tab (see Figure 114). 3. Double-click an access host IP address in the Access Control List section and type a new host IP address. Note that the list is scrollable. If you do not see your user name, scroll down using the scroll bar or by clicking the Access Host heading. You - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 262
a permission for the host from the Access Control List menu. Options are Read Only and Read Write. 5. Click Apply. NOTE The port number is not included. RADIUS service management Fabric OS supports RADIUS authentication, authorization, and accounting service (AAA). When configured for RADIUS, the - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 263
Failed, or Switch Database when RADIUS Login Timeout from the Secondary AAA Service menu. To disable RADIUS service, select Switch Database from the Primary AAA Service menu and select None from the Secondary AAA Service menu. 5. Click Apply. Web Tools Administrator's Guide 235 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 264
change it, CHAP will be the authentication protocol. 9. Click OK to return to the AAA Service tab. 10. Click Apply. Modifying the RADIUS Server Use the following procedure to change the OK to return to the AAA Service tab and click Apply. 236 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 265
service management Active Directory is the directory server that holds all the user profiles. Active Directory provides user the AAA Service tab. 3. To enable Active Directory service, select Active Directory from the Primary AAA Service menu. Web Tools Administrator's Guide 237 53 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 266
Service menu. To disable Active Directory service, select Switch Database from the Primary AAA Service dropdown menu and select None from the Secondary AAA Service the AAA Service tab. 3. Service tab and click Apply. Removing Active Directory service Services tab. 5. Click Apply in the AAA Services - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 267
security services for IP networks. Several protocols are available for providing authentication and secure transmission of data. From you may need to do a significant amount of research and planning. The supported protocols and algorithms are defined and described in the RFCs listed in Table - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 268
visual comparison of how transport mode and tunnel mode modify an IP datagram. FIGURE 117 Transport mode and tunnel mode comparison 240 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 269
(AH) • Encapsulating Security Payload (ESP) Authentication Header AH can be used to authenticate a data stream, but does not provide encryption needed for privacy. The AH contains a message authentication code in transport mode and tunnel mode Web Tools Administrator's Guide 241 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 270
Gateway In an endpoint to gateway configuration, a protected endpoint connects through an IPSec protected tunnel. This can be used as a virtual private network (VPN) for connecting a roaming computer, like a service laptop, to a protected network. 242 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 271
256 bit block cipher. RFC 4869 Hash algorithms Hash message authentication codes (HMAC) check data integrity through a mathematical calculation on a message using a hash algorithm combined with a produces a 160-bit hash. FIPS Pub 180-1 Web Tools Administrator's Guide 243 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 272
) Algorithm The PRF algorithm generates output that appears to be random data, using the HMAC chosen as the hash algorithm as the seed each other to jointly establish a shared secret key over an insecure communications channel. DH group choices are 1(modp768), 2(modp1024), 14(modp2048), and 18 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 273
between two parties over a secure channel before it is used. Typically, the Each user possesses a private user data. To verify the contents of digitally signed data, the recipient generates a new message digest from the data data that has been encrypted with the corresponding private key. - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 274
FCIP IPSec over FCIP 7500 extension switches and FR4-81i blades use FCIP protocol to IP to carry Fibre Channel traffic over IP networks. IPSec can be used to secure the IP flows over an FCIP tunnel. shows the IKE tab. FIGURE 120 IKE Policies (FCIP) 246 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 275
expires, the security association (SA) is rekeyed. This limits the amount of time a given key is available to a potential attacker. 9. Click OK. Web Tools Administrator's Guide 247 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 276
choices are SHA-1, MD5, and AESXCBC. The remaining three fields are grayed out. They apply only to IKE policies. 7. Click OK. 248 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 277
establish a secure connection between a PC or workstation and Web Tools. The connection can be used as a virtual private network (VPN) interface to Web Tools. At a high level, the steps to take are as 123 IPSec Policies (Ethernet management port) Web Tools Administrator's Guide 249 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 278
Local Identifier field. This is normally the IP address in IPv4 or IPv6 format, but it may also be a DNS name. 250 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 279
displayed. 2. Select the SA tab. 3. Select Add. The Add SA dialog box is displayed (Figure 125). FIGURE 125 Add SA dialog box Web Tools Administrator's Guide 251 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 280
type an SPI number. An SPI (Security Parameter Index) number is automatically assigned, but may be manually overridden. 9. Click OK. Creating an SA proposal An SA proposal is sent from one endpoint to another FIGURE 126 Add SA-Proposal dialog box 252 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 281
both inbound and outbound flows. 1. Select the Transforms tab. The Transforms screen is displayed (Figure 127). FIGURE 127 Transforms tab 2. Select Add. Web Tools Administrator's Guide 253 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 282
6. Select the IPSec Protection Type. The choices are discard, bypass, and protect. - Discard causes data packets to be rejected if there is an invalid pair of source and destination addresses or invalid port local and peer IP address. 9. Click OK. 254 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 283
IP address, and a specific transform. 1. Select the Selectors tab. The Selectors screen is displayed (Figure 129). FIGURE 129 Selectors tab 2. Select Add. Web Tools Administrator's Guide 255 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 284
the Peer IP Address field. 7. Choose the Transform Name. 8. The Protocol Name selector allows you to choose a specific protocol. 9. Click OK. 256 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 285
3. Type a security parameter index number in the SPI (Hexadecimal) field. The SPI must be manually applied when manually adding an SA. 4. Enter the IP address of the endpoint that sends the SA in the . - For the flow from source to peer choose out. Web Tools Administrator's Guide 257 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 286
the IPSec Protection Type. The choices are discard, bypass, or process. - Discard causes data packets to be rejected if there is an invalid pair of source and destination addresses or Security Policies, select Ethernet IPSec or Ethernet IPSec. 258 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 287
), or 4 (2048 bit). 9. Use the Device Authentication Policy Mode selector to set the desired mode. The choices are On, Off, or Passive. Web Tools Administrator's Guide 259 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 288
in the Switch WWN: Name/Domain ID field. 14. Generate shared secrets. Several tools and methods are available for this purpose. 260 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 289
. 17. Click Add. An entry is added in the Switch WWN box. 18. Click OK. 19. Add more shared secrets if needed. Web Tools Administrator's Guide 261 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 290
17 Establishing authentication policies for HBAs 262 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 291
Data (RNID 272 FICON CUP fabrics overview Control supports CUP can be controlled by one or more host-based management programs or director consoles, such as Brocade Web Tools or Brocade Fabric Manager. (Refer to the Fabric Manager Administrator's Guide 4S enterprise-class must: • Install a FICON CUP - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 292
based on ingress port and destination only. This also includes user-configured paths. All ports with FICON devices attached must have 41. 3. Click the FICON CUP tab. If the EGM license is not installed on the switches using CUP protocol, access to this feature is denied and Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 293
Server mode FICON Management Server (FMS) is used to support switch management using CUP. To be able to use the the director. You can use Web Tools to install a CUP license. For more information on installing licenses, see "Activating a license on a Tools Administrator's Guide 265 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 294
This parameter is set as enabled by the hardware after system installation, and can be reset by Web Tools. User Alert Mode Controls director console behavior for alerts. Enabling this mode prompts the on, the parameter is reset to disabled. 266 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 295
control of port connectivity; otherwise, host programming can manage port connectivity. This parameter is set as disabled by the hardware after system installation that the parameter is enabled. You cannot configure the User Alert Mode parameter in Web Tools, as it is read Guide 267 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 296
control device accepts commands from any channel that has established a logic path with it and accepts commands from alternate managers. When the control click Refresh to get most recent update. You can manually reset allegiance to bring the control device back to the neutral state by clicking Reset - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 297
configuration file is the IPL. Any other files displayed are user-defined configurations and are stored on the switch. You can those characters are displayed as dots (.). When initially installed, a switch allows any port to dynamically communicate with Tools Administrator's Guide 269 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 298
for the configuration file. • Click Refresh to refresh the information from the switch. • Click Cancel to cancel all changes without saving. 270 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 299
connectivity configuration to a new configuration. 1. Display the CUP port connectivity configuration list. 2. Click a saved configuration or the active configuration from the list. Web Tools Administrator's Guide 271 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 300
18 Displaying Request Node Identification Data (RNID) 3. Click Copy. The Copy CUP Port Connectivity Configuration . Displaying Request Node Identification Data (RNID) Web Tools displays RNID information for the local switch, and for attached FICON devices and FICON channel paths. RNID information for - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 301
Displaying Request Node Identification Data (RNID) 18 RNID information for attached FICON devices and channel paths displays on the Name Server view. To view this information Type • Model • Manufacturer • Manufacturer Plant • Unit Type • Tag Web Tools Administrator's Guide 273 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 302
18 Displaying Request Node Identification Data (RNID) 274 Web Tools Administrator's Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 303
functionality if you want to use it. Launching the default telnet is not supported in Windows Vista and Windows 2008 server. Fabric Watch, Switch Admin, HA, Maximize button is disabled. Web Tools does not support NAT router configurations and will not function correctly with switches behind - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 304
install. A reboot is required to activate the newly downloaded firmware -4S enterprise-class Control Panel. Occasionally, you might see the following message when you try to get data data. If your data at that moment; the data from the Java Control Panel, you Web Tools supports only one browser - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 305
try to retrieve data from the firmware version than the new problem, increase the default heap size in the Java Control Panel. See "Java plug-in configuration" on page 8 for instructions users are actually using them, use the perfdeleemonitor or perfcleareemonitor command to free the resources. For SCSI - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 306
button will not fix the problem. Workaround: Click the able to click the data entry fields to enter manually close these windows. Occasionally, switches might display the port icons correctly, but be missing one or more control Explorer 6.0, when the user launches Switch Explorer Guide 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 307
Domains (DD), 203 Access Control List. See ACL access control. See RBAC. Access Gateway mode limitations, 275, 278 refresh frequency, setting, 6 supported, 5 buffer-limited ports, 187 C Challenge Handshake CHAP authentication, 193 secret, editing, 207 user, creating, 207 class F traffic, 49 clearing - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 308
domains (DD), 204 iSCSI fibre channel zones with an effective zone configuration, 209 iSCSI fibre channel zones with no effective zone configuration, 209 SCC/DCC policy, 225 SCSI command graphs, 127 SCSI vs. IP traffic graphs, 127 SID-DID performance graphs, 125 virtual targets for iSCSI Target - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 309
89 RADIUS service, 235 Control user account information, 217 DLS, 212 domain ID, changing, 46 downloading configuration file, 69 firmware, 73 Dynamic Load Sharing. See DLS E E_D_TOV, 49 edge fabrics about, 162 editing DDset, 206 discovery domains (DD), 205 iSCSI fibre channel Guide 281 53-1001194-01 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 310
, 193 FC virtual initiator, 193 GbE, 193 IQN, 193 iSCSI fibre channel zone members, editing, 208 iSCSI fibre channel zone, creating, 208 iSCSI fibre channel zone, creating with an effective zone configuration, 209 iSCSI fibre channel zone, creating with no 282 Web Tools Administrator's Guide 53 - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 311
, 193 iSCSI virtual target, 193 launching module, 194 LUN mapping, 193 managing/troubleshooting accessibility, 210 PDU, 193 search for FC target, 202 supported switches, 192 VT LUN, 193 iSCSI target, editing for iSCSI Target Gateway, 201 ISL trunking, 111 J Java Plug-ins configuring, 8 installing - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 312
, 49 persistently disable a port, 89 platforms, supported, 5 polling rates, 34 port membership in Admin probing enabling and disabling, 51 Role-Based Access Control. See RBAC router cost path, 167 routes, 227 delete, 227 edit, 227 SCSI command graph, 127 SCSI vs. IP traffic graph, 127 searching - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 313
43 removing, 43 system services, configuring, 51 T user accounts, managing, 215 V value line licenses, 10 VC Priority, 50 viewing EX_Ports, 165 LSAN devices, 168 LSAN fabrics, 164 LSAN zones, 167 swapped ports, 93 Switch Explorer, 19 switch status, 156 viewing FCR router cost, 167 virtual channel - HP StorageWorks 4400 | Brocade Web Tools Administrator's Guide v6.2.0 (53-100119 - Page 314
access, 133 zoning database clearing, 149 maximum size, 136, 145 zoning views, 137 zoning, disabling, 146 zoning, saving changes, 102, 136 286 Web Tools Administrator's Guide 53-1001194-01
53-1001194-01
November 24, 2008
Web Tools
Administrator’s Guide
Supporting Fabric OS v6.2.0