HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua
HP StorageWorks 64 - SAN Director Switch Manual
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 64 manual content summary:
- HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 1
E/OS SNMP Support Manual P/N 620-000131-620 REV A - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 2
Manual Update to manual Update to manual Update to support EFCM 6.1and 6.2 Update to support EFCM 6.1, 6.2, & 6.3 Update to support E/OS 5.1 and EFCM 7.0 Update to support E/OS 5.2 and EFCM 7.2 Update to support E/OS 6.0 Update to support assumes no responsibility for any errors that may appear. All - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 3
Enterprise MIBs 1-5 Traps and Their Purpose 1-5 Chapter 2 McDATA SNMP Support Overview 2-1 E/OS Trap Overview 2-3 E/OS Trap summary table 2-4 2-8 Enterprise-specific FRU Traps 2-8 Enterprise-specific Link Traps 2-10 FA MIB Switch Status Change Trap 2-10 FA MIB Event Trap 2-11 FA MIB Sensor - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 4
Appendix B FC Management MIB FCMGMT-MIB Definitions B-1 Connectivity unit group B-4 Sensor table B-20 Port Table B-24 Event Group B-37 Link Table B-42 Port Statistics B-49 FC Simple conventions for this MIB C-2 Enterprise Specific Object Identifiers C-5 iv McDATA SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 5
Translation group E-14 IP group E-16 ICMP group E-33 TCP group E-40 SNMP group E-50 Appendix F Fabric Element Management MIB FCFE.MIB F-1 Configuration group F-6 Operation group F-18 F_Port Fabric Login table F-21 FxPort Fabric Login table F-25 Error group F-30 Accounting Groups F-35 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 6
Contents vi McDATA SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 7
documentation suite that supports the McDATA® Sphereon™ 3016 Fabric Switch, Sphereon 3032 Fabric Switch, Sphereon 3216 Fabric Switch, Sphereon 3232 Fabric Switch, Sphereon 4500 Fabric Switch, Sphereon 4300 Fabric Switch, ES-1000 Switch, ED-5000 Director, Intrepid® 6064 Director, and Intrepid 6140 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 8
and 6064 Director Product Manager User Manual (620-000153) • McDATA Intrepid 6140 Director Installation and Service Manual (620-000157) • McDATA SANpilot User Manual (620-000160) • McDATA Sphereon 3016 and 3216 Fabric Switch Product Manager User Manual (620-000151) viii E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 9
) • McDATA Sphereon 4300 Switch Installation and Service Manual (620-000171) • Planning User Manual (P/N 620-000220-010) • Event Management User Manual (P/N 620-000224-010) • EFC Manager Software Upgrade Instructions Release 8.6 (P/N 958-000336-030) • SANavigator User Guide (P/N 621-000013) Preface - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 10
object to highlight it. Where to Get Help For technical support, McDATA® end-user customers should call the phone number located on the service label attached to the front or rear of the hardware product or (720) 558-3910 Fax: (720) 558-3851 E-mail: [email protected] x E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 11
service representative for technical support. Forwarding Publication Comments We sincerely appreciate any comments about this publication. Did you find this manual a paper copy of this manual, submit a purchase order as described in Ordering McDATA Documentation Instructions, which is found on - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 12
Preface All other trademarked terms, indicated by a registered trademark symbol (®) or trademark symbol (™) on first use in this publication, are trademarks of their respective owners in the United States, other countries, or both. xii E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 13
1 Introduction to SNMP Network management is a broad term, including workstation configuration, assignment of IP addresses, network design, architecture, network security, and topologies. All this can fall within the scope of a network manager. Any protocol for managing networks must allow - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 14
a change of status on the agent (issue a trap). With SNMP, administrators can manage the switch configuration, faults, performance, accounting, and security from remote SNMP management stations. SNMP is the only is used to retrieve lists and tables of management data. 1-2 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 15
In a Managed Device Variables are the means by which a switch or director (and other devices) keep track of their performance, control their port back on. Some variables just hold values that indicate status (for example error counts). SNMP allows the network managers to have access to some of the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 16
MIB) as described in RFC 1213: supported by all switches and directors. • Fibre Alliance (FCMGMT) MIB, version 3.1: supported by EFC Server, Sphereon 4500 Fabric Switch, Sphereon™ 3216 Fabric Switch, Sphereon 3232 Fabric Switch, Intrepid™ 6064 Director, Intrepid 6140 Director, ES-3016, ES-3032, and - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 17
Private Enterprise MIBs Traps and Their Purpose Introduction to SNMP 1 • Fibre Channel Fabric Element (FCFE), version 1.10: supported by all switches and directors. Private MIBs are those provided by the manufacturer of the managed devices to allow management of device-specific items. Chapter 2 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 18
Introduction to SNMP 1 1-6 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 19
as specified in RFC1213. • Fabric Element MIB containing support for FL ports as specified in Fibre Channel standards. • Fibre Alliance MIB (also referred to as the FC Management MIB). • FCEOS MIB, the McDATA enterprise specific MIB supporting the McDATA switch and director firmware. McDATA SNMP - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 20
McDATA SNMP Support 2 • SNMP Framework MIB. NOTE: The remainder of this document refers only to the 3.1 version of the Fibre Alliance MIB, and uses its nomencature. If you have need of information about the 3.0 version, refer to the MIB itself. 2-2 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 21
McDATA SNMP Support 2 E/OS Trap Overview NOTE: All E/OS traps are SNMPv1 format, regardless of MIB definition syntax. SNMP traps are specific types of SNMP messages enclosed in - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 22
, and Trap PDUs Contain the Same Fields: [PDU type | Request ID | Error status | Error index | Object/Value 1 | Object/Value 2] For the SNMPv2 trap pdu, This table shows the different kinds of traps supported by the switch E/OS firmware. All E/OS traps are SNMPv1 format, regardless SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 23
FRU active* ES FRU backup* ES FRU update* ES FRU failed* ES link bit error event* ES link no signal event* ES link NOS event* ES link failure event elapse after link is added before trap is sent. McDATA SNMP Support 2 Trap OID 1.3.6.1.4.1.289.2 1.3.6.1.4.1.289.3 1.3.6.1.4.1.289.4 E/OS EFCM YES - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 24
McDATA SNMP Support 2 Trap Switch SCN Switch Deletion Event SCN Sensor SCN Port SCN Severity Sent because Alert Change in switch status. Alert A switch is removed from management control. Info the actual variable OID would be 1.3.6.1.4.1.289.2.1.1.2.3.1.1.3.6. 2-6 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 25
McDATA SNMP Support 2 Enterprise-specific Port Status Change Trap This trap is sent for each port the following values: 0x01, Backplane 0x02, Control Processor card 0x03, Serial Crossbar 0x04, Shasta 32 center fan module 0x05, Fan module 0x06, Power supply module 0x07, Reserved 0x08, Longwave, - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 26
McDATA SNMP Support 2 Enterprise-specific Invalid Attachment Trap This trap is sent when an invalid attachment occurs (a device is attached, with a backup, FRU update, FRU failed: type codes 5-9) share the same bindings. There are 4 variable bindings for these traps: 2-8 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 27
16.0 fcEosSysSwitchId FRU Code Description 1 Backplane 2 Control Processor card 3 Serial Crossbar 4 Shasta 32 Mode, MT-RJ connector, 1 Gig 15 Mixed, MT-RJ connector, 1 Gig 16 F-Port, internal, 1 Gig McDATA SNMP Support 2 Value The FRU code for this FRU. See table below. The FRU position - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 28
. Binding 1 OID 1.3.6.1.2.1.8888.1.1.3.1.6. fcConnUnitStatus. Where unit-id is the WWN of the switch with 8 zeros appended for a total length of 16. Example: 1.2.3.4.5.6.7.8.0.0.0.0.0.0.0.0 Value Unit status. See definition for fcConnUnitStatus. 2-10 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 29
McDATA SNMP Support 2 Binding 2 OID 1.3.6.1.2.1.8888.1.1.3.1.5. fcConnUnitState. Where unit-id is the WWN of the switch with 8 zeros appended for a total length of 16. Example: 1.2.3.4.5.6.7.8.0.0.0.0.0.0.0.0 Value Unit state. See definition for fcConnUnitState. FA MIB Event - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 30
SNMP Support 2 WWN of the switch with 8 zeros appended for a total length of 16. Example: 1.2.3.4.5.6.7.8.0.0.0.0.0.0.0.0 is the port number normalized to the range 1-140. 1.3.6.1.2.1.8888.1.1.6.1.5. . number normalized to the range 1-140. Value See definition for - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 31
SNMP Support 2 Description An fcEosPortScn(1) is generated whenever a Fc_Port changes its operational state. For instance, the Fc_Port goes from online Description An fcEosPortBindingViolation(3) is generated whenever the switch detects that a port binding violation occurs. fcEosThresholdAlert - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 32
McDATA SNMP Support 2 Description fcEosSysSwitchName fcEosSysSwitchId An fcEosFruRemoved trap is generated when a FRU is removed or its status Trap Variables 8 Generated when a FRU status changes to update/busy. fcEosFruCode fcEosFruPosition fcEosSysSwitchName 2-14 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 33
McDATA SNMP Support 2 Description fcEosSysSwitchId An fcEosFruFailed trap is generated when a FRU status changes ErrorEvent Type Number Product Mapping Trap Variables Description 10 Generated when the bit error rate for a link exceeds the threshold. fcEosPort Index fcEosPortName fcEosPort WWN - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 34
McDATA SNMP Support 2 Description An fcEosLinkNoSignalEvent trap is generated when there is a loss of signal or sync. Trap Variables 14 Generated when an invalid primitive sequence is detected. fcEosPortIndex fcEosPortName fcEosPortWWN fcEosSysSwitchName 2-16 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 35
Support 2 Description An fcEosLinikInvalidEvent trap is generated when an invalid primitive sequence is detected. fcEosLinkAddedEvent Type Number Product Mapping Trap Variables Description 15 Generated when the firmware trap information from HP OpenView The output from HP OpenView for a online - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 36
which identifies this as a switch SCN trap (from table in section 2.3). After the trap OID, the variable bindings are listed. HP OpenView calls them "ARGS" and for the unit-id than the E/OS firmware (see below). In both cases the unit-id is a string of 16 numbers. Following the unit-id is the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 37
Support 2 EXAMPLE: Interpretation of trap information from MG-SOFT MIB Browser 1. 3: Specific trap #3 trap(v1) received from: 172.16.7.243 at 09/25/2002 3:06:45 PM Time stamp: 0 days 00h:00m:12s.36th Agent address: 172.16 Bindings (4) Binding #1: fcConnUnitId.16.0.8.0.136.122.40.0.0.0.0.0.0.0.0.0 *** - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 38
16.7.243 at 09/25/2002 3:06:45 PM As displayed by the MG-SOFT browser, the output above is shown in hierarchical tree form. Trap number 3 has been expanded to show the details of the information contained in the trap. The agent address is the IP address of the switch . 2-20 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 39
Definitions: MIB-II There are eleven groups of objects specified in MIB-II. The E/OS SNMP agent supports eight groups: • System Group . This group provides general information about the managed system. • Interfaces Group • Address Translation Group • This group is implemented, but the corresponding - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 40
McDATA SNMP Support 2 Description The vendor's authoritative identification of the network management subsystem contained in the entity. This value is Description DisplayString (0..255) RW The physical location of this node (e.g., `telephone closet, 3rd floor'). 2-22 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 41
McDATA SNMP Support 2 sysServices Type Access Description INTEGER R A value which indicates the set of services that this entity primarily offers. The of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 42
McDATA SNMP Support 2 Interfaces Table The interfaces table contains information on the entity's interfaces. Each interface is thought of as being attached protocol stack. Values: other(1), none of the following regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), 2-24 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 43
(14), fddi(15), lapb(16), sdlc(17), ds1(18), T-1 e1(19), european equivalent of T-1 basicISDN(20), primaryISDN(21), proprietary serial propPointToPointSerial(22), ULTRA technologies ds3(30), --T-3 sip(31), -- SMDS frame-relay(32) McDATA SNMP Support 2 MIB Definitions: MIB-II 2-25 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 44
McDATA SNMP Support 2 ifMtu Type Access Description INTEGER R The size of the largest datagram which can be sent/received on the interface, specified in RW The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. 2-26 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 45
McDATA SNMP Support 2 ifOperStatus Type Access Description INTEGER R The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. ifLastChange Type - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 46
McDATA SNMP Support 2 ifInDiscards Type Access Description Counter R The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a , including those that were discarded or not sent. 2-28 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 47
McDATA SNMP Support 2 ifOutNUcastPkts Type Access Description Counter R The total number of packets that Counter R The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 48
McDATA SNMP Support 2 by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the 2-30 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 49
McDATA SNMP Support 2 corresponding entry in the atTable object. That is, it effectively disassociates the interface identified with said entry from the mapping identified with said entry. It - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 50
input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, Time-To-Live exceeded, errors discovered in processing their IP via this entity, and the Source-Route option processing was successful. 2-32 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 51
SNMP Support 2 ipInUnknownProtos Type Acccess Description Counter R The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. ipInDiscards Type Access Description Counter R The number of input IP datagrams for which no problems - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 52
McDATA SNMP Support 2 Description The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., Type Access Description Counter R The number of IP datagrams successfully. 2-34 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 53
McDATA SNMP Support 2 ipReasmFails Type Access Description Counter R The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 54
McDATA SNMP Support 2 IP Address Table The IP address table contains this entity's IP addressing information. ipAdEntAddr Type Access Description IpAddress R The to both the subnet and network broadcasts addresses used by the entity on this (logical) interface. 2-36 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 55
McDATA SNMP Support 2 ipAdEntReasmMaxSize Type Access Description INTEGER (0..65535) R The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 56
McDATA SNMP Support 2 ipRouteProto value. If this metric is not used, its value should be set to -1. ipRouteMetric2 Type Access Description INTEGER RW An which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.) 2-38 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 57
of values for gateway routing protocols is not intended to imply that hosts should support those protocols. other(1) none of the following local(2) -protocol information, e.g., manually configured entries netmgmt(3) set via a network management protocol icmp(4) e.g., obtained via ICMP, Redirect - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 58
being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the be noted that all IP routing subsystems implicitly use this mechanism. 2-40 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 59
McDATA SNMP Support 2 ipRouteMetric5 Type Access Description INTEGER RW An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 60
McDATA SNMP Support 2 Description The media-dependent `physical' address. ipNetToMediaNetAddress Type IpAddress Access RW Description The IpAddress the following invalid(2), an invalidated mapping dynamic(3), static(4) ipRoutingDiscards Type Access Counter R 2-42 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 61
McDATA SNMP Support 2 Description The number of routing entries which were chosen to be discarded even The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). icmpInDestUnreachs Type Access Description Counter R - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 62
McDATA SNMP Support 2 Description The number of ICMP Parameter Problem messages received. icmpInSrcQuenchs Type Access Description Counter R The number of ICMP Source Quench of ICMP Timestamp (request) messages received. icmpInTimestampReps Type Access Counter R 2-44 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 63
McDATA SNMP Support 2 Description The number of ICMP Timestamp Reply messages received. ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 64
Support 2 Access Description R The number of ICMP Destination Unreachable messages sent. icmpOutTimeExcds Type Access Description Counter R The number of ICMP Time Exceeded messages sent. icmpOutParmProbs Type Access Description Counter R The number of ICMP Parameter Problem SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 65
McDATA SNMP Support 2 icmpOutEchoReps Type Access Description Counter R The number of ICMP Echo Reply messages sent. icmpOutTimestamps Type Access Description Counter R The number of ICMP Timestamp (request) messages - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 66
McDATA SNMP Support 2 TCP Group Note that instances of object types that represent information about a particular TCP connection are transient; they persist of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the 2-48 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 67
described in RFC 793. tcpMaxConn Type Access Description INTEGER R The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1. tcpActiveOpens Type Access Description Counter - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 68
Description Counter R The total number of segments received, including those received in error. This count includes segments received on currently established connections. tcpOutSegs Type Access transmitted containing one or more previously transmitted octets. 2-50 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 69
McDATA SNMP Support 2 TCP Connection Table The TCP connection table contains information about this entity's existing TCP connections. tcpConnState Type Access Description INTEGER RW The state of this - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 70
McDATA SNMP Support 2 Description The local IP address for this TCP connection. In TCP connection. tcpInErrs Type Access Description Counter R The total number of segments received in error (e.g., bad TCP checksums) tcpOutRsts Type Access Description Counter R The number of TCP segments sent - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 71
McDATA SNMP Support 2 UDP Group udpInDatagrams Type Access Description Counter R The total number of UDP datagrams delivered to UDP users. udpNoPorts Type Access Description Counter R The total number - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 72
objects defined below will be zero-valued in those SNMP implementations that are optimized to support only those functions specific to either a management agent or a management station. In particular messages delivered to the SNMP entity from the transport service. 2-54 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 73
McDATA SNMP Support 2 snmpOutPkts Type Access Description Counter R The total number of SNMP messages which were passed from the SNMP protocol entity to the transport service. snmpInBadVersions Type Access Description Counter R The total number of SNMP messages which were delivered to the SNMP - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 74
the error-status field is `readOnly.' It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP. 2-56 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 75
McDATA SNMP Support 2 snmpInGenErrs Type Access Description Counter R The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr.' snmpInTotalReqVars Type Access Description Counter R The total number of MIB objects - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 76
McDATA SNMP Support 2 snmpInSetRequests Type Access Description Counter R The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.' snmpOutNoSuchNames Type Access Description Counter R The total number of SNMP - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 77
McDATA SNMP Support 2 snmpOutBadValues Type Access Description Counter R The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue.' snmpOutGenErrs Type Access Description Counter R The total number of SNMP PDUs - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 78
McDATA SNMP Support 2 snmpOutGetResponses Type Access Description Counter R The total number of SNMP Get-Response PDUs which have been generated by it remains constant between re-initializations of the network management system. Values: enabled(1), disabled(2) 2-60 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 79
McDATA SNMP Support 2 Fabric Element Management MIB There are five groups of objects hex values: 0: ignored, 1: IEEE 48-bit address, 2: IEEE extended, 3: Locally assigned, 4: 32-bit IP address. FabricName Syntax Description FcNameId The Name Identifier of a Fabric. Each Fabric shall provide - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 80
within the address space of a Fabric. FcRxDataFieldSize Syntax Description INTEGER (128..2112) Receive Data_Field Size. FcBbCredit Syntax Description INTEGER (0..32767) Buffer-to FcCosCap Syntax Description INTEGER (0..127) bit 0 - Class F bit 1 - Class 1 2-62 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 81
(2) 155 Mbaud (12.5MB/s) quarter(4) 266 Mbaud (25.0MB/s) half(8) 532 Mbaud (50.0MB/s) full(16) 1 Gbaud (100MB/s) double(32) 2 Gbaud (200MB/s) quadruple(64) 4 Gbaud (400MB/s) Fc0BaudRateCap Syntax Description INTEGER (0..127) bit 0 other bit 1 oneEighth bit 2 quarter bit 3 half - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 82
wire (tw) long video (lv) reserved for future use. Fc0Medium Syntax Description INTEGER The values are defined as follows: unknown(1) sm(2) m5(4) m6(8) tv(16) mi(32) stp(64) tw(128) lv(256) Fc0TxType Syntax Description INTEGER The values are defined as follows: 2-64 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 83
unknown(1) longWaveLaser(2) - (LL) shortWaveLaser(3)-(SL) longWaveLED(4) - (LE) electrical(5) - (EL) shortWaveLaser-noOFC(6) - (SN) McDATA SNMP Support 2 Fc0Distance Syntax Description INTEGER The values are defined as follow: unknown(1), long(2), intermediate(3), short(4). FcFeModuleCapacity - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 84
McDATA SNMP Support 2 FcFxPortMode Syntax Description INTEGER The values are defined as follow: unknown(1), fPort(2), flPort(3). FcBbCreditModel Syntax Description in the Fabric Element, containing information about the modules Fabric Element MIB Object Name 2-66 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 85
McDATA SNMP Support 2 fcFeModuleDescr Type Provided By Access Description DisplayString (SIZE(256)) McK DEV_TBL R Access Description INTEGER SNMP R This object indicates the operational status of the module: online(1) - the module is functioning properly; offline(2) - the module is not available; - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 86
McDATA SNMP Support 2 offline(2): the module is not available if any of the ports on the current module is offline. Table A table that contains one entry for each Fx_Port in the Fabric Element, containing configuration and service parameters of the Fx_Ports. 2-68 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 87
FcphVersion Provided By FC2 Access R Description The highest or most recent version of FC-PH that the Fx_Port is configured to support. Since the switch is not capable of changing its support for FC-PH version, the version reported is the one currently in use for this port. If there is no device - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 88
The lowest or earliest version of FC-PH that the Fx_Port is configured to support. Since the switch is not capable of changing its support for FC-PH version, the version reported is the one currently in use for This is fixed at 2112. FcFxPortRatov Type MilliSeconds 2-70 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 89
. FcFxPortCosSupported Type Provided By Access Description FcCosCap SNMP R A value indicating the set of Classes of Service supported by the Fx_Port. This is fixed at CLASS_2 | CLASS_3 (0x0C). fcFxPortIntermixSupported Type INTEGER Provided By SNMP Access R Description A flag indicating - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 90
indicating the mode of Stacked Connect supported by the Fx_Port. This is fixed whether or not Class 2 Sequential Delivery is supported by the Fx_Port. The values are defined as flag indicating whether or not Class 3 Sequential Delivery is supported by the Fx_Port. The values are defined as follow - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 91
shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this parameter. This is equal to quarter of d the E_D_TOV which is obtained from PCP. FcFxPortBaudRate Type Provided By Access Description Fc0BaudRate FPM - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 92
McDATA SNMP Support 2 Description The FC-0 transmitter type of the Fx_Port. 1 Unknown (long distance laser) 2 LongwaveLaser (LC version) 3 ShortwaveLaser 6 until the module is re-initialized. FcFxPortID Type Provided By Access FcAddressId Login Server R 2-74 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 93
this F_Port has no NxPort attached to it. This variable has been deprecated and may be implemented for backward compatibility. Not supported for NL_ports. FcFPortConnectedPort Type Provided By Access Description FcAddressId SNMP R The address identifier of the destination Fx_Port with which this - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 94
McDATA SNMP Support 2 FcFxPortOperMode Type Provided By Access Description FcFxPortMode AS R The current operational mode of the Fx_Port. This value is identified Fx_Port until the module is re-initialized. FcFxPortPhysAdminStatus Type INTEGER Provided By PCP, FPM 2-76 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 95
McDATA SNMP Support 2 Access Description R/W The desired state of the Fx_Port. A management state if and only if there is a fault that prevents it from going to the online(1) state. The values are defined as online(1) - Login may proceed, offline(2) - Login cannot proceed, testing(3) - port is - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 96
detect Loss of Synchronization. This value is fixed at 100ms. An entry containing service parameters established from a successful Fabric Login. fcFxlogiFxPortIndex Type Provided By Access Description the attachment for which the entry contains information. 2-78 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 97
The version of FC-PH that the Fx_Port has agreed to support from the Fabric Login. FcFxPortNxPortBbCredit Type Provided By Access Description in number of bytes and ranges from 128 to 2112 inclusive. FcFxPortCosSuppAgreed Type FcCosCap Provided By Login Server Access R Fabric Element Management - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 98
for the support of classes of services and only valid if Class 1 service is supported. The values are defined support stacked connect from the Fabric Login. This is only meaningful if Class 1 service support Class 2 sequential delivery from the Fabric Login. This is only meaningful if Class 2 service - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 99
Provided By Login Server Access R Description A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if Class 3 service has been agreed. The values are defined as yes(1) and no(2). FcFxPortNxPortName Type Provided - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 100
McDATA SNMP Support 2 Access Description Fx_Port Error Table R This object identifies the BB_Credit model used by the Fx_Port. The regular model refers to the Buffer By Access Description Counter PSCC R The number of loss of synchronization detected by the Fx_Port. 2-82 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 101
McDATA SNMP Support 2 FcFxPortSigLosses Type Provided By Access Description Counter PSCC R The number of loss of signal detected by the Fx_Port. FcFxPortPrimSeqProtoErrors Type Counter Provided By PSCC Access R Description The number of primitive sequence protocol errors detected by the Fx_Port. - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 102
McDATA SNMP Support 2 FcFxPortAddressIdErrors Type Counter Provided By PSCC Access R Description The number of address identifier errors detected by this Fx_Port. FcFxPortLinkResetIns Type Provided By Fx_Port. FcFxPortOlsOuts Type Provided By Access Counter PSCC R 2-84 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 103
the Fabric Element, Class 1 accounting information. These entries are all zero excep for the index, since class 1 is not supported. fcFxPortC1AcctFxPortIndex Type FcFeFxPortIndex Provided By SNMP Access R Description This object identifies the Fx_Port within the module. This number ranges from - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 104
McDATA SNMP Support 2 Provided By Access Description SNMP R The number of F_BSY frames generated by this Fx_Port against Class 1 connect-request. This value than Class 1 connect-request) received by this Fx_Port from its attached Nx_Port. This value is fixed at 0. 2-86 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 105
McDATA SNMP Support 2 FcFxPortC1OutFrames Type Provided By Access Description Counter SNMP R The number of Class 1 frames (other than Class 1 connect-request) delivered through this Fx_Port to its attached - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 106
McDATA SNMP Support 2 Class 2 Accounting table A table that contains one entry for each Fx_Port in the Fabric Element, Class 2 accounting 2 frames delivered through this Fx_Port to its attached Nx_Port. FcFxPortC2InOctets Type Provided By Access Counter PSCC R 2-88 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 107
FcFxPortC2Discards Type Provided By Access Description Counter SNMP R The number of Class 2 frames discarded by this Fx_Port. This value is not supported. It's always zero. FcFxPortC2FbsyFrames Type Provided By Access Description Counter PSCC R The number of F_BSY frames generated by this Fx_Port - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 108
McDATA SNMP Support 2 Class 3 Accounting table A table that contains one entry for each Fx_Port in the Fabric Element, Class 3 accounting 3 frames delivered through this Fx_Port to its attached Nx_Port. FcFxPortC3InOctets Type Provided By Access Counter PSCC R 2-90 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 109
McDATA SNMP Support 2 Description The number of Class 3 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port. FcFxPortC3OutOctets Type Provided By Access Description - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 110
2 or Class 3 frames from the attached Nx_Port. This value is fixed at 16. FcFxPortCapBbCreditMin Type FcBbCredit Provided By SNMP Access R Description The minimum number of receive at 1. FcFxPortCapRxDataFieldSizeMax Type FcRxDataFieldSize Provided By SNMP Access R 2-92 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 111
of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service. The values are defined as follow: yes(1) and no(2). This value is fixed no(2). FcFxPortCapStackedConnMode Type FcStackedConnMode Fabric Element Management MIB - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 112
indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting. This value is fixed at none(1). FcFxPortCapClass2SeqDeliv Type INTEGER Provided By ) that the Fx_Port is capable of supporting. This value is not supported. It's always zero. 2-94 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 113
indicating the set of baud rates that the Fx_Port is capable of supporting. This variable has been deprecated and may be implemented for backward compatibility set of media that the Fx_Port is capable of supporting. NOTE: All the counters are 32-bit counters. Fabric Element Management MIB 2-95 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 114
Support Syntax Description OCTET STRING (SIZE(16)) Represents the World wide Name (1), emergency (2), alert (3), critical (4), error (5), warning (6), notify (7), info (8), debug connectivity unit supporting loop protocol, switch (4) - active connectivity unit supporting multiple protocols, - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 115
McDATA SNMP Support 2 For example, FC ATM, converter (6) - unit that converts from one interface to another, For devices. FcPortFCClass Syntax Description Connectivity Unit Group BITS Represents the class(es) of service represented on a given port, in a given operational context. The values are - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 116
McDATA SNMP Support 2 Value Access Description http://switch's IP-addr R The top-level URL of the system. If it on the system's units *fcConnUnitId Type Product Mapping Access Description OCTET STRING Switch's WWN. R The unique identification for this connectivity unit among those within this - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 117
Product Mapping Access Description FcGlobalId Switch's WWN. R An optional global-scope identifier for this connectivity unit. It MUST be a WWN for this connectivity unit or 16 octets of value zero. WWN formats requiring fewer than 16 octets MUST be extended to 16 octets with trailing zero octets - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 118
(1), online (2), offline (3). FcConnUnitStatus Type Product Mapping INTEGER This value will be mapped from current status of switch in such a way that operational status indicates ok (3), degraded status indicates warning (4), failed status indicate failed (5). 2-100 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 119
McDATA SNMP Support 2 Access Description R This object reports the overall status of the connectivity unit. The warning (4) value means that the connectivity unit needs attention; all other values - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 120
Mapping Access Description OCTET STRING (SIZE (3)) FFCCXX XX is the active domainId of the switch. R 24-bit Fibre Channel address ID of this connectivity unit. Following the fibre channel defined as unknown (1), no (2), yes (3). FcConnUnitNumSensors Type Unsigned32 2-102 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 121
Type Product Mapping Access Description OCTET STRING(SIZE(16) return 16 zeros.(currently not supported) R This is a unique id, persistent a module. FcConnUnitName Type Product Mapping Access Description SnmpAdminString switch's configured name. Writable and persistent across IPL. R/W - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 122
be supported by PCP. ResetConnUnitWarmStart (4) indicates IPL on the switch is performed. ResetConnUnitColdStart (3) is not supported. R/W 'online' state. In general, if a unit is in an online state, it is capable of performing meaningful Fibre Channel work. 2-104 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 123
values not supported by a given implementation, the agent will return the SNMP WrongValue PDU error code. The intended to facilitate contacting someone in case of problems, questions, etc. (e.g., the help desk SnmpAdminString The physical location of the switch. Writable and persistent across IPL. - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 124
, the value of this object MUST be zero. Firmware Table The revisions table lists the revisions supported by the associated connectivity units. *fcConnUnitRevsIndex Type Product value of fcConnUnitId, in the range between 1 and fcConnUnitNumRevs[fcConnUnitId]. 2-106 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 125
Type SnmpAdminString Product Mapping Switch Firmware Level Access R Description Description of a component in the fcConnUnit to which the revision corresponds. Sensor Table The sensor table lists the sensors(for fan and power supplies) supported by each switch. For each switch, the table will - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 126
McDATA SNMP Support 2 FcConnUnitSensorName Type Product Mapping Access Description SnmpAdminString The module name of the FRU, Mapping Access Description SnmpAdminString The serial number of the FRUs. It's not supported if the module is failed. R Miscellaneous static information about the sensor - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 127
battery (3), fan (4), powerSupply (5), transmitter (6), enclosure (7), board (8), and receiver (9). FcConnUnitSensorCharacteristic Type INTEGER Product Mapping Not supported. Always other (2). Access R Description The characteristics being monitored by this sensor. The unknown (1) and other - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 128
Support 2 Access Description R A unique value among all fcConnUnitPortEntrys on this connectivity unit, between 1 and fcConnUnitNumPorts. FcConnUnitPortType Type Product Mapping Access Description INTEGER If the port is Not installed notPresent(3) else if the Port State is online Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 129
16) public loop fabric port fabric expansion port generic fabric port domain controller hub controller parallel SCSI port escon port LAN port WAN port McDATA SNMP Support ) Access R Description Bit mask that specifies the classes of service capability of this port. If this object is not applicable, - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 130
The current state of the port hardware. The bypassed value (4) means that the port is online but is currently being isolated from the loop or fabric for some reason; the other values value (7) means that the port is in the process of coming into service; the 2-112 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 131
McDATA SNMP Support 2 bypassed value (8) means that the port has been manually or automatically isolated from the loop or fabric; the other values are essentially self-explanatory. Any value for this object may co-exist with any - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 132
in form of [domain, area, node]. If it's E_Port, return left-adjusted domain ID of the switch. R This is the assigned Fibre Channel ID of this port. This value is expected to be a Big FcConnUnitPortVendor Type Product Mapping Access SnmpAdminString Not applicable. R 2-114 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 133
Support 2 FcConnUnitPortSpeed Type Product Mapping Access Description Gauge32 Return 100000 kilobytes for 1 Gb/s switches and 200000 kilobytes for 2 Gb/s switches bypass' operation. Examples of these operations are: transitioning from online to offline, a request (NON-PARTICIPATING) command to the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 134
performed to this port, the addressed port performs a vendor-specific 'online' operation. Examples of these operations are: enabling a port's and values not supported by a given implementation, the agent will return the SNMP WrongValue PDU error code. FcConnUnitPortName Type E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 135
McDATA SNMP Support 2 FcConnUnitPortProtocolCap (added from Mib3.0) Type OCTET STRING (SIZE (2)) Product Mapping If the - 0, Loop - 1, Fabric - 2, SCSI - 4, TCP/IP - 8, VI - 16, FICON - 32. FcConnUnitPortProtocolOp (added from Mib3.0) Type OCTET STRING (SIZE (2)) Product Mapping If the port is - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 136
the same definition as fcConnUnitPortProtocolCap. FcConnUnitPortNodeWwn (added from Mib3.0) Type FcNameId Product Mapping switch WWN Access R Description The Node World Wide Name of the port if applicable (3) port failed diagnostics FCAL bypass loop only, 2-118 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 137
Port in ext loopback Transmitter fault media not installed waiting for activity (rx sync) McDATA SNMP Support 2 The Event Table The table of connectivity unit events. Errors, warnings, and information should be reported in this table. *fcConnUnitEventIndex Type Product Mapping Access Description - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 138
Type FcEventSeverity Product Mapping The mapping from switch event severity level to FcEventServerity: Access Description SWITCH MIB informational info(8) minor error(5) major critical(4) severe emergency(2) R The event severity level: unknown (1) 2-120 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 139
emergency (2) alert (3) critical (4) error (5) warning (6) notify (7) info (8) debug (9) mark (10) McDATA SNMP Support 2 FcConnUnitEventType Type Product Mapping Access Description INTEGER Always status(3). R The type of this event. The values are defined as follows: unknown (1) other (2) status - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 140
the table in as best it can. One of the methods to fill this in would be to use the RNID ELS (ANSI document 99-422v0). This allows one to query a port for the information needed for the link table. This total number of entries are defined by the size of the table. 2-122 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 141
McDATA SNMP Support 2 NOTE: (for E/OS firmware): A reset or firmware load will cause this table to is reset and the first value to be used is 1. FcConnUnitLinkNodeIdX Type OCTET STRING (SIZE(16)) Product Mapping The WWN of the local fcConnUnit is returned. This information is available for both - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 142
WWN of the unit specified by fcConnUnitLinkNodeIdX if known, otherwise 16 octets of binary 0. FcConnUnitLinkNodeIdY Type OCTET STRING (SIZE(16)) Product Mapping The attached node WWN on the link. This For E_Ports, returns the WWN of the connected switch. Access R 2-124 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 143
Support 2 Description The port WWN on the unit specified by fcConnUnitLinkNodeIdY if known, otherwise 16 octets of binary 0. FcConnUnitLinkAgentAddressY Type OCTET STRING (SIZE(16 Type FcUnitType Product Mapping If it's E_Port, return switch (4). Otherwise return RNID type Y. Access R Description - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 144
[fcConnUnitPortUnitId]. fcConnUnitPortStatCountError Type Counter64 Product Mapping This MIB object counts: address ID errors, CRC errors, delimiter errors, frames too short, invalid transmission words, link failures, primitive sequence errors, signal losses, 2-126 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 145
2 Access Description synchronization losses. (Only supports low 32-bits of counter, high 32-bits are set to zero). R A count of the errors that have occurred on this port. FcConnUnitPortStatCountTxObjects Type Counter64 Product Mapping stTxFrames (64-bit counter). Access R Description The number - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 146
Support Type Counter64 Product Mapping stRxOctets (64-bit counter). Access R Description The FcConnUnitPortStatCountBBCreditZero Type Counter64 Product Mapping Not supported. Access R Description Number of transitions Type Counter64 Product Mapping Not supported. Access R Description Number - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 147
of all classes. If you cannot keep the by class counters, then keep the sum counters. FcConnUnitPortstatisticCountFRJTFrames Type Counter64 Product Mapping Not supported. Access R Description Number of times that FRJT was returned to this port as a result of a Frame that was rejected by the fabric - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 148
. FcConnUnitPortStatCountPRJTFrames Type Counter64 Product Mapping Not supported. Access R Description Number of times Type Counter64 Product Mapping Not supported. Access R Description Number of Type Counter64 Product Mapping Not supported. Access R Description Number of - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 149
frames (the frames that establish a connection). NOTE: This is a Fibre Channel only statistic. FcConnUnitPortStatCountClass1FRJTFrames Type Counter64 Product Mapping Not supported. Access R Description Number of times that FRJT was returned to this port as a result of a Class 1 Frame that was - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 150
only statistic. FcConnUnitPortStatCountClass2TxFrames Type Counter64 Product Mapping stC2FramesOut (64-bit counter). Access R Description Number of Class 2 Counter64 Product Mapping stC2FabricBusy (Only supports low 32 bits of counter, high 32 bits are set to zero). Access SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 151
establish a connection). NOTE: This is a Fibre Channel only statistic. FcConnUnitPortStatCountClass2FRJTFrames Type Counter64 Product Mapping stC2FabricReject (Only supports low 32 bits of counter, high 32 bits are set to zero). Access R Description Number of times that FRJT was returned to this - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 152
McDATA SNMP Support 2 FcConnUnitPortStatCountClass3RxFrames Type Counter64 Product Mapping stC3FramesIn (64-bit counter). Access R Description Number of only statistic. FcConnUnitPortStatCountRxMulticastObjects Type Counter64 Product Mapping Not supported. Access R 2-134 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 153
this port. On a Fibre Channel loop, count only OPNr frames generated. FcConnUnitPortStatCountRxLinkResets Type Counter64 Product Mapping StLinkResetsIn (Only supports low 32 bits of counter, high 32 bits are set to zero). Access R Description Number of Link resets. This is the number of LRs received - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 154
Product Mapping stLinkResetsOut (Only supports low 32 bits of counter, high 32 bits are set to StLinkResetsIn + stLinkResetsOut (Only supports low 32 bits of counter, high 32 bits are set to zero Counter64 Product Mapping StOlssIn (Only supports low 32 bits of counter, high 32 bits are set to zero). - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 155
link failures. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). NOTE: This is a Fibre Channel only statistic. FcConnUnitPortStatCountInvalidCRC Type Counter64 Product Mapping stInvalidCrcs (Only supports low 32 bits of counter, high 32 bits are set to zero). Access R Fibre - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 156
Type Counter64 Product Mapping stSigLosses (Only supports low 32 bits of counter, high 32 bits are set to zero). Access R Description Number of instances of signal loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). 2-138 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 157
Type Counter64 Product Mapping stSyncLosses (Only supports low 32 bits of counter, high 32 bits are set to zero). Access R Description Number of instances of synchronization loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 158
Product Mapping stFramesTooShort (Only supports low 32 bits of counter, high 32 bits are set to Product Mapping stAddrIDErrors (Only supports low 32 bits of counter, high 32 bits are set to zero Product Mapping stDelimiterErrors (Only supports low 32 bits of counter, high 32 bits are set to - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 159
2 FcConnUnitPortStatCountEncodingDisparityErrors Type Counter64 Product Mapping Not supported. Access R Description Number of disparity errors received at this port. NOTE: This is a Fibre Channel only statistic. Name Server Table This table is accessed either directly (if the management software - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 160
this data to be present, IP address must have been registered with the switch. fcConnUnitSnsProcAssoc Type OCTET STRING (SIZE) (8)) Product Mapping Process Associator. Access R Description The Process Associator for this entry in the SNS table. See FC-PH sec. 19.4. 2-142 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 161
OCTET STRING (SIZE) (32)) FC4 type. R The FC-4 Types supported by this entry in the SNS table. Bitmap of FC-4 types supported. See FC-GS2 SIZE) (16)) Product Mapping Port IP Address. Access R Description In order for this data to be present, IP address must have been registered with the switch. See - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 162
McDATA SNMP Support 2 fcConnUnitSnsHardAddress Type FcGlobalId Product Mapping Bytes address from name server in the number of SNMP trap recipients can be supported in the system. R The maximum number of SNMP trap recipients supported by the connectivity unit. FcTrapClientCount Type Unsigned32 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 163
McDATA SNMP Support 2 Product Mapping Access Description TrapRegTable The current number of trap recipients. R The current number of rows in the trap table. A table containing a row for each - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 164
Types fcConnUnitStatusChange Type Number 1 Product Mapping Generated when the switch's online status or operational status changes. OID and Value ".1.3.6.1.2.1.8888.1.1.3.1.6" of the connectivity unit has changed. Recommended severity level (for filtering): alert. 2-146 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 165
Type Number Product Mapping OID and Value Description 2 Not supported on the connUnit. N/A An fcConnUnit has been deleted from this agent. Recommended severity level (for filtering): warning. fcConnUnitEventTrap Type Number Product Mapping OID and Value - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 166
McDATA SNMP Support 2 OID and Value Description ".1.3.6.1.2.1.8888.1.1.6.1.6" + unitId + port_nbr fcConnUnitPortStatus, ".1.3.6.1.2.1.8888.1.1.6.1.5" + unitId + port_nbr status of the connectivity unit has changed. Recommended severity level (for filtering): alert. 2-148 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 167
A Fibre Alliance MIB FA MIB Changed snsPortIndex to counter32 (8/12/02) Modified UTCTime from 13 digits (200XXXXX0000Z) to 11 digits (0XXXXX0000Z). Changed the Syntax of fcConnUnitPortSpeed from gauge32 to Unsigned32. Rename the MIB from fcmgmt.mib to fa.mib May 14, 2002 lxw FIBRE-CHANNEL-MGMT-MIB - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 168
.com" Description REVISION Description The fibre channel management MIB module. 0105080000Z Changed fcConnUnitId and fcConnUnitPortIndex from not-accessible to read-only REVISION 0012040000Z A-2 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 169
Fibre Alliance MIB A Description Made the following edits: Used FcPortFCClass as the type for the fcConnUnitPortFCClassCap and fcConnUnitPortFCClassOp objects in the FcConnUnitPortEntry SEQUENCE statement. Used fcConnUnitGlobalId instead of fcConnUnitId as notification objects in the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 170
with a Fibre Channel (FC) entity. OCTET STRING (SIZE(16)) FcEventSeverity Status Description Syntax current The set of values which define . INTEGER { unknown (1), emergency (2), alert (3), critical (4), error (5), warning (6), notify (7), info (8), debug (9), A-4 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 171
FcUnitType Status Description Syntax current unknown (1) other (2) hub (3) switch (4) gateway (5) converter (6) hba (7) proxyAgent (8) storageDevice (9) of the following passive connectivity unit supporting loop protocol. active connectivity unit supporting multiple protocols. unit that converts - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 172
class(es) of service represented on a given port, in a given operational context. BITS { unknown (0), classF (1), class1 (2), class2 (3), class3 (4), class4 (5), class5 (6), class6 (7) } Connectivity unit group fcConnUnitNumber Syntax Max-Access Unsigned32 read-only A-6 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 173
Fibre Alliance MIB A Status Description Sequence current The number of connectivity units present on this system. May be a count of the boards in a chassis or the number of full boxes in a rack. ::= { fcMgmtConfig 1 } fcConnURL Syntax Max-Access Status Description Sequence Connectivity table - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 174
, fcConnUnitProxyMaster INTEGER, fcConnUnitPrincipal INTEGER, fcConnUnitNumSensors Unsigned32, fcConnUnitNumRevs Unsigned32, fcConnUnitModuleId OCTET STRING, fcConnUnitName SnmpAdminString, fcConnUnitInfo SnmpAdminString, fcConnUnitControl INTEGER, A-8 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 175
An optional global-scope identifier for this connectivity unit. It MUST be a WWN for this connectivity unit or 16 octets of value zero. WWN formats requiring fewer than 16 octets MUST be extended to 16 octets with trailing zero octets. If a WWN is used for fcConnUnitId, the same WWN MUST be used for - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 176
. ::= { fcConnUnitEntry 2 } fcConnUnitType Syntax Max-Access Status Description Sequence FcUnitType read-only current The type of this connectivity unit. ::= { fcConnUnitEntry 3 } fcConnUnitNumPorts Syntax Unsigned32 A-10 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 177
unit (internal/embedded, external). ::= { fcConnUnitEntry 4 } Fibre Alliance MIB A fcConnUnitState Syntax Max-Access Status Description Sequence INTEGER { unknown(1), online(2), offline(3) } read-only current This object reports the overall state of the connectivity unit. The meaning of all - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 178
same as the top-level URL. This has the same definition as fcConnURL for keywords. ::= { fcConnUnitEntry 10 } fcConnUnitDomainId Syntax OCTET STRING (SIZE(3)) A-12 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 179
Fibre Alliance MIB A Max-Access Status Description Sequence read-only current 24 bit Fibre Channel address ID of this connectivity unit. Following the fibre channel standard, the right-most bit of the right-most octet is for the least significant bit of the address value; the left-most bit of the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 180
15 } fcConnUnitModuleId Syntax Max-Access Status Description Sequence OCTET STRING (SIZE(16)) read-only current This is a unique id, persistent between boots unit is not part of a module. ::= { fcConnUnitEntry 16 } fcConnUnitName Syntax Max-Access Status Description Sequence SnmpAdminString read- - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 181
Fibre Alliance MIB A fcConnUnitInfo Syntax Max-Access Status Description Sequence SnmpAdminString read-write current Information about this connectivity unit. This object value should be persistent between boots. ::= { fcConnUnitEntry 18 } fcConnUnitControl Syntax Max-Access Status Description - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 182
in case of problems, questions, etc. (e.g., the a help desk internal to a company). ::= { fcConnUnitEntry 20 } fcConnUnitLocation Syntax Max-Access Status Description Sequence SnmpAdminString read-write current Location information for this connectivity unit. ::= { fcConnUnitEntry 21 } A-16 E/OS - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 183
Fibre Alliance MIB A fcConnUnitEventFilter Syntax Max-Access Status Description Sequence FcEventSeverity read-write current This value defines the event severity that will be logged by this connectivity unit. All events of severity less than or equal to fcConnUnitEventFilter are logged in the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 184
not-accessible current Description Table of the revisions of components (e.g., firmware, hardware, etc.) supported by the connectivity units managed by this agent. ::= { SnmpAdminString } fcConnUnitRevsIndex Syntax Max-Access Status Unsigned32 not-accessible current A-18 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 185
a component in the ConnUnit to which the revision corresponds. Sequence ::= { fcConnUnitRevsEntry 3 } The sensor table list the sensors supported by each connectivity unit. fcConnUnitSensorTable Syntax Max-Access Status Description Sequence SEQUENCE OF FcConnUnitSensorEntry not-accessible current - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 186
all fcConnUnitSensorEntrys with the same value of fcConnUnitId, in the range between 1 and fcConnUnitNumSensors[fcConnUnitId]. ::= { fcConnUnitSensorEntry 1 } fcConnUnitSensorName Syntax Max-Access Status SnmpAdminString read-only current A-20 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 187
3 } fcConnUnitSensorInfo Syntax Max-Access Status Description Sequence SnmpAdminString read-only current Miscellaneous static information about the sensor such as its serial number. ::= { fcConnUnitSensorEntry 4 } FA MIB A-21 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 188
sensor. The unknown (1) and other (2) values meanings analogous to those for the fcConnUnitSensorStatus object; all other values are essentially self-explanatory. ::= { fcConnUnitSensorEntry 6 } A-22 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 189
Fibre Alliance MIB A fcConnUnitSensorCharacteristic Syntax INTEGER { unknown(1), other(2), temperature(3), pressure(4), emf(5), currentValue(6), airflow(7), frequency(8), power(9) } Max-Access read-only Status current Description The characteristics being monitored by this sensor. The - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 190
, fcConnUnitPortControl INTEGER, fcConnUnitPortName SnmpAdminString, fcConnUnitPortPhysicalNumber Unsigned32, fcConnUnitPortProtocolCap OCTET STRING, fcConnUnitPortProtocolOp OCTET STRING, fcConnUnitPortNodeWwn FcNameId, fcConnUnitPortHWState INTEGER } A-24 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 191
-Access Status INTEGER { unknown (1), other (2), notPresent (3), hubPort (4), nPort (5), lPort (6), flPort (7), fPort (8), ePort (9), gPort (10), domainController (11), hubController (12), scsi (13), escon (14), lan (15), wan (16) } read-only current FA MIB A-25 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 192
mask that specifies the classes of service capability of this port. If this object is not applicable, the agent MUST return all bits set to zero. Sequence ::= { fcConnUnitPortEntry 3 } fcConnUnitPortFCClassOp Syntax FcPortFCClass Max-Access read-only Status current A-26 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 193
MIB A Description Sequence Bit mask that specifies the classes of service that are currently operational at this port. If this object is state of the port hardware. The bypassed value (4) means that the port is online but is currently being isolated from the loop or fabric for some reason; the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 194
that the port is in the process of coming into service; the bypassed value (8) means that the port has been manually or automatically isolated from the loop or fabric; the other { fcConnUnitPortEntry 7 } fcConnUnitPortModuleType Syntax INTEGER { unknown(1), other(2), A-28 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 195
Fibre Alliance MIB A Max-Access Status Description Sequence gbic(3), embedded(4), glm(5), gbicSerialId(6), gbicNoSerialId(7), gbicNotInstalled(8), smallFormFactor(9) } read-only current The module type of the port connector. This object refers to the hardware implementation of the port. The - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 196
-Access Status Description Sequence Unsigned32 "kilobytes per second" read-only current The speed of the port in kilobytes per second. ::= { fcConnUnitPortEntry 14 } A-30 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 197
operation to be performed to this port, the addressed port performs a vendor-specific 'bypass' operation. Examples of these operations are: transitioning from online to offline, a request (NON-PARTICIPATING) command to the Loop Port state machine, or removal of the port from an arbitrated loop by - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 198
addressed port performs a vendor-specific 'online' operation. Examples of these operations supported by a given implementation, the agent will return the SNMP WrongValue PDU error 16 } fcConnUnitPortPhysicalNumber Syntax Unsigned32 Max-Access read-only Status current A-32 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 199
bits set to zero. The bits have the following definition: unknown - 0 Loop - 1 Fabric - 2 SCSI - 4 TCP/IP - 8 VI - 16 FICON - 32 Sequence ::= { fcConnUnitPortEntry 18 } fcConnUnitPortProtocolOp Syntax OCTET STRING (SIZE (2)) Max-Access read-only Status current Description Bit mask that - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 200
will have the ame Node WWN. Sequence ::= { fcConnUnitPortEntry 20 } fcConnUnitPortHWState Syntax INTEGER { unknown (1), failed (2), bypassed hardware detected state of the port. ::= { fcConnUnitPortEntry 21 } Event group fcConnUnitEventTable Syntax Max-Access SEQUENCE OF FcConnUnitEventEntry - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 201
Fibre Alliance MIB A Status Description Sequence current The table of connectivity unit events. Errors, warnings, and information should be reported in this table. ::= { fcMgmtConfig 7 } fcConnUnitEventEntry Syntax Max-Access Status Description Sequence FcConnUnitEventEntry not-accessible - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 202
MM=month number YYYY=year number HH=hour number MM=minute number SS=seconds number If not applicable, return a NULL string. ::= { fcConnUnitEventEntry 2 } A-36 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 203
Fibre Alliance MIB A fcConnUnitSEventTime Syntax Max-Access Status Description Sequence TimeTicks read-only current This is the sysuptime timestamp when the event occurred. ::= { fcConnUnitEventEntry 3 } fcConnUnitEventSeverity Syntax FcEventSeverity Max-Access read-only Status current - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 204
. A connectivity unit should fill the table in as best it can. One of the methods to fill this in would be to use the RNID ELS (ANSI document 99-422v0). This allows one to query a port for the information needed for the link table. A-38 E/OS SNMP - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 205
Fibre Alliance MIB A This table is Max-Accessed either directly if the management software has an index value or via GetNexts. The value of the indexes are not required to be contiguous. Each entry created in this table will be assigned an index. This relationship is kept persistent until the entry - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 206
the first value to be used is 1. ::= { fcConnUnitLinkEntry 1 } fcConnUnitLinkNodeIdX Syntax OCTET STRING (SIZE(64)) Max-Access read-only Status current Description The node WWN of the unit at one end of the Syntax Integer32 Max-Access read-only Status current A-40 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 207
::= { fcConnUnitLinkEntry 3 } fcConnUnitLinkPortWwnX Syntax OCTET STRING (SIZE(16)) Max-Access read-only Status current Description The port WWN if known, otherwise 16 octets of binary 0. Sequence ::= { fcConnUnitLinkEntry 4 } fcConnUnitLinkNodeIdY Syntax OCTET STRING (SIZE(64)) Max-Access read - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 208
agent for the node identified by fcConnUnitLinkNodeIdY, if known; otherwise 16 octets of binary 0. Sequence ::= { fcConnUnitLinkEntry 8 } fcConnUnitLinkAgentAddressTypeY 9 } fcConnUnitLinkAgentPortY Syntax Unsigned32 Max-Access read-only Status current A-42 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 209
This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a 24-bit Big Endian value. If this is each individual port. For all objects in statistics table, if the object is not supported by the conn unit then the high order bit is set to 1 with all other - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 210
, Counter64, fcConnUnitPortStatC1TxFrames fcConnUnitPortStatC1FBSYFrames Counter64, Counter64, fcConnUnitPortStatC1PBSYFrames Counter64, fcConnUnitPortStatC1FRJTFrames Counter64, fcConnUnitPortStatC1PRJTFrames Counter64, fcConnUnitPortStatC2RxFrames Counter64, A-44 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 211
fcConnUnitPortStatC2TxFrames fcConnUnitPortStatC2FBSYFrames fcConnUnitPortStatC2PBSYFrames fcConnUnitPortStatC2FRJTFrames fcConnUnitPortStatC2PRJTFrames fcConnUnitPortStatC3RxFrames fcConnUnitPortStatC3TxFrames fcConnUnitPortStatC3Discards fcConnUnitPortStatRxMcastObjects - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 212
Syntax Max-Access Status Description Sequence Counter64 read-only current A count of the errors that have occured on this port. ::= { fcConnUnitPortStatEntry 2 } fcConnUnitPortStatTxObjects Syntax port. Note: A Fibre Channel frame starts with SOF and ends with A-46 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 213
Fibre Alliance MIB A Sequence EOF. FC loop devices should not count frames passed through. This value represents the sum total for all other Rx objects. ::= { fcConnUnitPortStatEntry 4 } fcConnUnitPortStatTxElements Syntax Counter64 Max-Access read-only Status current Description The number - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 214
is the sum of all classes. If you cannot keep the by class counters, then keep the sum counters. Sequence ::= { fcConnUnitPortStatEntry 10 } A-48 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 215
Fibre Alliance MIB A fcConnUnitPortStatFRJTFrames Syntax Counter64 Max-Access read-only Status current Description Count of times that FRJT was returned to this port as a result of a Frame that was rejected by the fabric. Note, this is the total for all classes and is a Fibre Channel only stat - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 216
occur on SOFc1 frames (the frames that establish a connection). Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 16 } fcConnUnitPortStatC1FRJTFrames Syntax Counter64 Max-Access read-only Status current Description Count of times that FRJT was returned to this - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 217
Counter64 Max-Access read-only Status current Description Count of Class 2 Frames transmitted out this port. Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 20 } fcConnUnitPortStatC2FBSYFrames Syntax Counter64 Max-Access read-only Status current FA MIB A-51 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 218
a connection). Note, this is a Fibre Channel only stat. ::= { fcConnUnitPortStatEntry 21 } fcConnUnitPortStatC2PBSYFrames Syntax Counter64 Max-Access read-only Status current Description Count of times destination N_Port. Note, this is a Fibre Channel only stat. A-52 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 219
Sequence ::= { fcConnUnitPortStatEntry 24 } Fibre Alliance MIB A fcConnUnitPortStatC3RxFrames Syntax Counter64 Max-Access read-only Status current Description Count of Class 3 Frames received at this port. Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 25 } - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 220
port. On a Fibre Channel loop, count only OPNr frames generated. Sequence ::= { fcConnUnitPortStatEntry 31 } fcConnUnitPortStatRxLinkResets Syntax Counter64 Max-Access read-only Status current A-54 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 221
Sequence Count of Link resets. This is the number of LRs received. Note, this is a Fibre Channel only stat. ::= { fcConnUnitPortStatEntry 32 } fcConnUnitPortStatTxLinkResets Syntax Counter64 Max-Access read-only Status current Description Count of Link resets. This is the number LRs transmitted - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 222
of frames received with invalid CRC. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Loop ports should not count CRC errors passing through when monitoring. Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 39 } A-56 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 223
read-only Status current Description Count of instances of signal loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 42 } fcConnUnitPortStatLossOfSync Syntax Counter64 Max - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 224
current Description Count of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat. Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 46 } A-58 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 225
only stat. Sequence ::= { fcConnUnitPortStatEntry 48 } fcConnUnitPortStatEncodingErrs Syntax Counter64 Max-Access read-only Status current Description Count of disparity errors received at this port. Note, this is a Fibre Channel only stat. Sequence ::= { fcConnUnitPortStatEntry 49 } Fibre Channel - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 226
an entry for each object registered with this port in the switch. ::= { fcMgmtSNS 1 } fcConnUnitSnsEntry Syntax Max-Access Status Description { fcConnUnitId, fcConnUnitSnsPortIndex, fcConnUnitSnsPortIdentifier } ::= { fcConnUnitSnsTable 1 } FcConnUnitSnsEntry ::= A-60 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 227
Fibre Alliance MIB A SEQUENCE { fcConnUnitSnsPortIndex Counter32, fcConnUnitSnsPortIdentifier FcGlobalId, was FcAddressId (undefined) fcConnUnitSnsPortName FcNameId, fcConnUnitSnsNodeName FcNameId, fcConnUnitSnsClassOfSvc OCTET STRING, fcConnUnitSnsNodeIPAddress OCTET STRING, - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 228
of Service offered by this entry in the SNS table. Sequence ::= { fcConnUnitSnsEntry 5 } fcConnUnitSnsNodeIPAddress Syntax OCTET STRING (SIZE(16)) Max-Access read-only Status current Description The IPv6 formatted address of the Node for this entry in the SNS table. A-62 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 229
Status Description Sequence OCTET STRING (SIZE (32)) read-only current The FC-4 Types supported by this entry in the SNS table table. ::= { fcConnUnitSnsEntry 9 } fcConnUnitSnsPortIPAddress Syntax OCTET STRING (SIZE(16)) Max-Access read-only Status current Description The IPv6 formatted address of - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 230
Syntax DisplayString (SIZE (0..79)) Max-Access read-only Status current Description The Symbolic Node Name of this entry in the SNS table. Sequence ::= { fcConnUnitSnsEntry 14 } A-64 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 231
fcTrapMaxClients Syntax Max-Access Status Description Sequence Unsigned32 read-only current The maximum number of SNMP trap recipients supported by the connectivity unit. ::= { fcMgmtNotifyFilter 1 } fcTrapClientCount Syntax Max-Access Status Description Sequence Unsigned32 read-only current The - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 232
host. The fcConnUnit will send to the designated target entity traps that have a severity level less than or equal to this value. A-66 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 233
Sequence ::= { fcTrapRegEntry 3} Fibre Alliance MIB A fcTrapRegRowState Syntax Max-Access Status Description Sequence RowStatus read-create current Specifies the operational status of the row. A RowStatus object may take any of six defined values: active: traps may be sent as specified in this - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 234
} current An event has been generated by the connectivity unit. Recommended severity level (for filtering): info. ::= { fcMgmtNotifications 3 } fcConnUnitSensorStatusChange OBJECTS { fcConnUnitSensorStatus } Status current A-68 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 235
Fibre Alliance MIB A Description Sequence The overall status of the connectivity unit has changed. Recommended severity level (for filtering): alert. ::= { fcMgmtNotifications 4 } fcConnUnitPortStatusChange OBJECTS { fcConnUnitPortStatus, fcConnUnitPortState } Status current Description The - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 236
supporting fibre channel connectivity units that support switch protocol. ::= { fcMgmtCompliances 1 } Conformance units The fibre channel connectivity unit group fcConnUnitGroup Objects { Scalars fcConnUnitNumber, fcConnURL, fcConnUnitTable fcConnUnitGlobalId, A-70 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 237
fcConnUnitType, fcConnUnitNumPorts, fcConnUnitState, fcConnUnitStatus, fcConnUnitProduct, fcConnUnitSerialNo, fcConnUnitUpTime, fcConnUnitUrl, fcConnUnitDomainId, fcConnUnitProxyMaster, fcConnUnitPrincipal, fcConnUnitNumSensors, fcConnUnitNumRevs, fcConnUnitModuleId, fcConnUnitName, fcConnUnitInfo, - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 238
, fcConnUnitPortPhysicalNumber, fcConnUnitPortProtocolCap, fcConnUnitPortProtocolOp, fcConnUnitPortNodeWwn, fcConnUnitPortHWState} current The collection of objects providing Fibre Channel connectivity unit instrumentation and control. ::= { fcMgmtGroups 1 } A-72 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 239
Event group Fibre Alliance MIB A fcCuEventGroup Objects Status Description Sequence Link group { fcConnUnitEventTable fcConnUnitEventIndex, fcConnUnitREventTime, fcConnUnitSEventTime, fcConnUnitEventSeverity, fcConnUnitEventType, fcConnUnitEventObject, fcConnUnitEventDescr } current The - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 240
, fcConnUnitPortStatPRJTFrames, fcConnUnitPortStatC1RxFrames, fcConnUnitPortStatC1TxFrames, fcConnUnitPortStatC1FBSYFrames, fcConnUnitPortStatC1PBSYFrames, fcConnUnitPortStatC1FRJTFrames, fcConnUnitPortStatC1PRJTFrames, fcConnUnitPortStatC2RxFrames, A-74 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 241
fcConnUnitPortStatC2TxFrames, fcConnUnitPortStatC2FBSYFrames, fcConnUnitPortStatC2PBSYFrames, fcConnUnitPortStatC2FRJTFrames, fcConnUnitPortStatC2PRJTFrames, fcConnUnitPortStatC3RxFrames, fcConnUnitPortStatC3TxFrames, fcConnUnitPortStatC3Discards, fcConnUnitPortStatRxMcastObjects, - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 242
, fcConnUnitSnsFabricPortName, fcConnUnitSnsHardAddress, fcConnUnitSnsSymbolicPortName, fcConnUnitSnsSymbolicNodeName } current The collection of objects providing Fibre Channel connectivity unit simple name server information. ::= { fcMgmtGroups 5 } A-76 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 243
SNMP trap filter group Fibre Alliance MIB A fcCuTrapFiltersGroup Objects Status Description Sequence FC-MGMT-MIB notifications group { Scalars fcTrapMaxClients, fcTrapClientCount, fcTrapRegTable fcTrapRegIpAddress, fcTrapRegPort, fcTrapRegFilter, fcTrapRegRowState } current The collection of - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 244
Fibre Alliance MIB A A-78 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 245
FROM RFC1213-MIB TRAP-Type FROM RFC-1215; Textual conventions for this MIB FcNameId ::= OCTET STRING (SIZE(8)) FcGlobalId ::= OCTET STRING (SIZE(16)) FcAddressId ::= OCTET STRING (SIZE(3)) FcEventSeverity ::= INTEGER { unknown (1), emergency (2), alert (3), FCMGMT-MIB Definitions B-1 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 246
error (5), warning (6), notify (7), info (8), debug (9), mark (10) -- All messages logged } FcUnitType ::= INTEGER { unknown(1), other(2), none of the following hub(3), passive connectivity unit supporting loop protocol. switch(4), active connectivity unit supporting SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 247
storage management and access for heterogeneous hosts and heterogeneous devices. wdm(15), waveform division multiplexer ups(16) uninterruptable power supply } fcmgmt OBJECT IDENTIFIER ::= { experimental 94 } Groups in fcmgmt connSet trapReg statSet connUnitServiceSet connUnitServiceScalars - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 248
the value is empty string. The URL format is implementation dependant and can have keywords embedded that are preceeded by a percent sign (e.g., %USER). B-4 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 249
PASSWORD replace with password GLOBALID replace with globalid SERIALNO replace with serial number Sequence If write is not supported, then return invalid. This value will be retained across boots. DEFVAL { "" } ::= { connSet 2 } statusChangeTime Syntax Access Status Description Sequence - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 250
Sequence ConnUnitEntry not-accessible mandatory A connectivity unit entry containing objects for a particular unit. INDEX { connUnitId } ::= { connUnitTable 1 } ConnUnitEntry ::= SEQUENCE { connUnitId FcGlobalId, connUnitGlobalId FcGlobalId, connUnitType B-6 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 251
FcUnitType, connUnitNumports INTEGER, connUnitState INTEGER, connUnitStatus INTEGER, connUnitProduct DisplayString, connUnitSn DisplayString, connUnitUpTime TimeTicks, connUnitUrl DisplayString, connUnitDomainId OCTET STRING, connUnitProxyMaster INTEGER, connUnitPrincipal INTEGER, connUnitNumSensors - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 252
among those within this proxy domain. The value MUST be unique within the proxy domain because it is the index variable for connUnitTable. B-8 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 253
optional global-scope identifier for this connectivity unit. It MUST be a WWN for this connectivity unit or 16 octets of value zero. WWN formats requiring fewer than 16 octets MUST be extended to 16 octets with trailing zero octets, Left justified, zero filled, If a WWN is used for connUnitId, the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 254
mandatory Number of physical ports in the connectivity unit (internal/ embedded, external). ::= { connUnitEntry 4 } connUnitState Syntax INTEGER { unknown(1), online(2), offline(3) available for meaningful work unavailable for meaningful work, for example in self-test mode, configuration, etc - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 255
Access Status Description Sequence read-only mandatory Overall state of the connectivity unit. ::= { connUnitEntry 5 } FC Management MIB B connUnitStatus Syntax Access Status Description Sequence INTEGER { unknown(1), unused(2), ok(3), warning(4), failed(5) cannot report status available for - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 256
has the same definition as systemURL for keywords. If write is not supported, then return invalid. This value will be retained across boots. . This should be set to the Fibre Channel address ID or if it is a switch it would be set to the Domain Controller address. If this value is not applicable, - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 257
FC Management MIB B connUnitProxyMaster Syntax Access Status Description Sequence INTEGER { unknown(1), no(2), yes(3) } read-only mandatory A value of 'yes' means this is the proxy master unit for a set of managed units. For example, this could be the only unit with a management card in it for a - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 258
centiseconds at which the last configuration change occurred. Sequence ::= { connUnitEntry 16 } connUnitNumRevs Syntax Access Status Description Sequence INTEGER read-only mandatory The 18 } connUnitModuleId Syntax Access Status FcGlobalId read-only mandatory B-14 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 259
This object value should be persistent between boots. ::= { connUnitEntry 20 } connUnitInfo Syntax Access Status Description Sequence DisplayString read-write mandatory should be persistent between boots. ::= { connUnitEntry 21 } connUnitControl Syntax INTEGER { unknown(1), invalid(2), - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 260
the addressed unit puts itself into an implementation dependant 'online' state. In general, if a unit is in an online state, it is capable of performing meaningful Fibre Channel information for this connectivity unit. Persistent across boots. ::= { connUnitEntry 23 } B-16 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 261
FC Management MIB B connUnitLocation Syntax Access Status Description Sequence DisplayString (SIZE (0..79)) read-write mandatory Location information for this connectivity unit.Persistent across boots. ::= { connUnitEntry 24 } connUnitEventFilter Syntax Access Status Description Sequence - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 262
. ::= { connSet 7 } connUnitRevsEntry Syntax Access Status Description Sequence ConnUnitRevsEntry not-accessible mandatory "" INDEX { connUnitRevsUnitId, connUnitRevsIndex } ::= { connUnitRevsTable 1 } ConnUnitRevsEntry ::= SEQUENCE { connUnitRevsUnitId FcGlobalId, B-18 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 263
connUnitRevsIndex INTEGER, connUnitRevsRevId DisplayString, connUnitRevsDescription DisplayString } FC Management MIB B connUnitRevsUnitId Syntax Access Status Description Sequence FcGlobalId read-only mandatory The connUnitId of the connectivity unit that contains this revision table. ::= { - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 264
SEQUENCE OF ConnUnitSensorEntry not-accessible mandatory Table of the sensors supported by each connectivity unit managed by this agent. ::= { ::= { connUnitSensorTable 1 } ConnUnitSensorEntry ::= SEQUENCE { connUnitSensorUnitId FcGlobalId, connUnitSensorIndex B-20 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 265
) read-only mandatory A unique value among all connUnitSensorEntrys with the same value of connUnitSensorUnitId, in the range between 1 and connUnitNumSensor[connUnitSensorUnitId]. ::= { connUnitSensorEntry 2} Connectivity unit group B-21 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 266
Status Description Sequence DisplayString read-only mandatory Miscellaneous static info about the sensor such as its serial number. ::= { connUnitSensorEntry 5 } connUnitSensorMessage Syntax DisplayString B-22 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 267
FC Management MIB B Access Status Description Sequence read-only mandatory This describes the status of the sensor as a message. It may also provide more resolution on the sensor indication, for example 'Cover temperature 1503K, above nominal operating range' ::= { connUnitSensorEntry 6 } - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 268
Syntax Access Status Description Sequence ConnUnitPortEntry not-accessible mandatory Each entry contains the information for a specific port. INDEX { connUnitPortUnitId, connUnitPortIndex } ::= { connUnitPortTable 1 } ConnUnitPortEntry ::= B-24 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 269
FC Management MIB B SEQUENCE { connUnitPortUnitId connUnitPortIndex connUnitPortType connUnitPortFCClassCap connUnitPortFCClassOp connUnitPortState connUnitPortStatus connUnitPortTransmitterType connUnitPortModuleType connUnitPortWwn connUnitPortFCId connUnitPortSn connUnitPortRevision - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 270
hub-port (4), n-port (5), nl-port (6), fl-port (7), f-port (8), e-port (9), g-port (10), domain-ctl (11), hub-controller(12), scsi (13), escon (14), lan (15), wan (16), ac (17), dc (18), ssa (19) end port for fabric end port for loop public loop fabric port fabric expansion port generic fabric port - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 271
read-only Status mandatory Description Bit mask that specifies the classes of service capability of this port. If this is not applicable, return all class-two 4 class-three 8 class-four 16 class-five 32 class-six 64 Sequence ::= { connUnitPortEntry 4 } connUnitPortFCClassOp Syntax - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 272
Management MIB B connUnitPortState Syntax INTEGER { unknown(1), online(2), offline(3), bypassed(4), diagnostics(5) available for meaningful work for the port. This value of connUnitPortState is not online, then this is reported Unknown. ::= { connUnitPortEntry 7 } B-28 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 273
connUnitPortTransmitterType Syntax INTEGER { unknown(1), other(2), unused(3), shortwave(4), longwave(5), copper(6), scsi(7), longwaveNoOFC(8), shortwaveNoOFC(9), longwaveLED(10), ssa(11) } Access read-only Status mandatory Description The technology of the port transceiver. Sequence ::= { - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 274
not have a Fibre Channel address, return all bits set to 1. ::= { connUnitPortEntry 11 } connUnitPortSn Syntax Access Status DisplayString (SIZE(0..79)) read-only mandatory B-30 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 275
FC Management MIB B Description Sequence The serial number of the unit (e.g., for a GBIC). If this is not applicable, return empty string. ::= { connUnitPortEntry 12 } connUnitPortRevision Syntax Access Status Description Sequence DisplayString (SIZE(0..79)) read-only mandatory The port revision - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 276
FC Management MIB B Access Status bypassConnUnitPort(4), unbypassConnUnitPort(5), offlineConnUnitPort(6), onlineConnUnitPort(7), resetConnUnitPortCounters(8) } read-write mandatory B-32 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 277
operation to be performed to this port, the addressed port performs a vendor-specific 'bypass' operation. Examples of these operations are transitioning from online to offline, a request (NON-PARTICIPATING) command to the Loop Port state machine, or removal of the port from an arbitrated loop by - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 278
'online' 16 } connUnitPortName Syntax Access Status Description DisplayString read-write mandatory A user-defined name for this port. This means that up to DisplayString characters may be supported. If less than, then the name will be truncated in the connunit. B-34 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 279
Sequence ::= { connUnitPortEntry 17 } FC Management MIB B connUnitPortPhysicalNumber Syntax INTEGER Access read-only Status mandatory Description This is the internal port number this port is known by. In many implementations, this should be the same as connUnitPortIndex. Some implementations - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 280
Loop - 1 Fabric - 2 SCSI - 4 TCP/IP - 8 VI - 16 FICON - 32 ::= { connUnitPortEntry 20 } connUnitPortProtocolOp Syntax Access Status Description Sequence OCTET STRING (SIZE (2)) read-only mandatory Bit will have the same Node WWN. ::= { connUnitPortEntry 22 } B-36 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 281
Syntax Access Status Description Sequence SEQUENCE OF ConnUnitEventEntry not-accessible mandatory The table of connectivity unit events. Errors, warnings, and information should be reported in this table. ::= { connSet 11 } connUnitEventEntry Syntax Access Status ConnUnitEventEntry not - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 282
, connUnitEventDescr DisplayString } connUnitEventUnitId Syntax Access Status Description FcGlobalId read-only mandatory The connUnitId of the connectivity unit that contains this event table. B-38 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 283
Sequence ::= { connUnitEventEntry 1 } FC Management MIB B connUnitEventIndex Syntax Access Status Description Sequence INTEGER (1..2147483647) read-only mandatory Each connectivity unit has its own event buffer. As it wraps, it may write over previous events. This object is an index into the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 284
this value to the index is that internal event id may represent a smaller number than a 32 bit integer (e.g. max 100 entries) and would only have a value range up to connUnitMaxEvents This is the sysuptime timestamp when the event occurred. ::= { connUnitEventEntry 5 } B-40 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 285
FC Management MIB B connUnitEventSeverity Syntax Access Status Description Sequence FcEventSeverity read-only mandatory The event severity level. ::= { connUnitEventEntry 6 } connUnitEventType Syntax Access Status Description Sequence INTEGER { unknown(1), other(2), status(3), configuration(4), - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 286
the table in as best it can. One of the methods to fill this in would be to use the RNID ELS (ANSI document 99-422v0). This allows one to query a port for the information needed for the link table. This total number of entries are defined by the size of the table. B-42 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 287
FC Management MIB B connUnitLinkTable Syntax Access Status Description Sequence SEQUENCE OF ConnUnitLinkEntry not-accessible mandatory A list of links know to this agent from this connectivity unit to other connectivity units. ::= { connSet 12 } connUnitLinkEntry Syntax Access Status Description - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 288
zero when the system is reset and the first value to be used is one. ::= { connUnitLinkEntry 2 } connUnitLinkNodeIdX Syntax Access Status Description Sequence OCTET STRING (SIZE(16)) read-only mandatory The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 289
Description The port WWN of the unit specified by connUnitLinkNodeIdX if known, otherwise 16 octets of binary 0. Sequence ::= { connUnitLinkEntry 5 } connUnitLinkNodeIdY Syntax Access Status Description Sequence OCTET STRING (SIZE(16)) read-only mandatory The node WWN of the unit at the other end - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 290
agent for the node identified by connUnitLinkNodeIdY, if known; otherwise 16 octets of binary 0. Sequence ::= { connUnitLinkEntry 9 } connUnitLinkAgentAddressTypeY Syntax is all zeros, then this value is ignored. Sequence ::= { connUnitLinkEntry 10 } B-46 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 291
Syntax Access Status Description Sequence OCTET STRING (SIZE(3)) read-only mandatory This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a Big Endian value of 24 bits. If this is loop, then it is the ALPA that is connected. If this - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 292
obsolete Description A list of statistics for the SCSI port type. Sequence ::= { statSet 3 } connUnitPortStatLANTable Syntax SEQUENCE OF ConnUnitPortStatLANEntry Access not-accessible Status obsolete B-48 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 293
each individual port. For all objects in statistics table, if the object is not supported by the conn unit then the high order bit is set to 1 with all zero. The high order bit is reserved to indicate if the object if supported or not. All objects start at a value of zero at hardware initialization - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 294
OCTET STRING, connUnitPortStatCountPRJTFrames OCTET STRING, connUnitPortStatCountClass1RxFrames OCTET STRING, connUnitPortStatCountClass1TxFrames OCTET STRING, connUnitPortStatCountClass1FBSYFrames OCTET STRING, connUnitPortStatCountClass1PBSYFrames B-50 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 295
OCTET STRING, connUnitPortStatCountClass1FRJTFrames OCTET STRING, connUnitPortStatCountClass1PRJTFrames OCTET STRING, connUnitPortStatCountClass2RxFrames OCTET STRING, connUnitPortStatCountClass2TxFrames OCTET STRING, connUnitPortStatCountClass2FBSYFrames OCTET STRING, - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 296
STRING, connUnitPortStatCountPrimitiveSequenceProtocolErrors OCTET STRING, connUnitPortStatCountLossofSignal OCTET STRING, connUnitPortStatCountLossofSynchronization OCTET STRING, connUnitPortStatCountInvalidOrderedSets OCTET STRING, connUnitPortStatCountFramesTooLong B-52 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 297
OCTET STRING, connUnitPortStatCountFramesTruncated OCTET STRING, connUnitPortStatCountAddressErrors OCTET STRING, connUnitPortStatCountDelimiterErrors OCTET STRING, connUnitPortStatCountEncodingDisparityErrors OCTET STRING } FC Management MIB B connUnitPortStatUnitId Syntax Access Status - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 298
FC Management MIB B Description Sequence A count of the errors that have occurred on this port. ::= { connUnitPortStatEntry 3 } connUnitPortStatCountTxObjects Syntax OCTET STRING (SIZE sets are not included in the count. Sequence ::= { connUnitPortStatEntry 6 } B-54 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 299
FC Management MIB B connUnitPortStatCountRxElements Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description The number of octets or bytes that have been received. by this port. One second periodic polling of the port. This value is saved and compared with the next polled - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 300
for all classes and is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 12 } connUnitPortStatCountPRJTFrames Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory B-56 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 301
port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 16 } Event Group B-57 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 302
at the destination N_Port. Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 19 } connUnitPortStatCountClass2RxFrames Syntax OCTET STRING (SIZE (8)) Access read-only B-58 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 303
is a Fibre Channel only stat. ::= { connUnitPortStatEntry 20 } connUnitPortStatCountClass2TxFrames Syntax OCTET STRING (SIZE (8)) Access read- a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 21 } connUnitPortStatCountClass2FBSYFrames Syntax OCTET STRING (SIZE (8)) Access read- - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 304
received at this port. Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 26 } connUnitPortStatCountClass3TxFrames Syntax OCTET STRING (SIZE (8)) Access read-only B-60 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 305
FC Management MIB B Status Description Sequence mandatory Count of Class 3 Frames transmitted out this port. Note, this is a Fibre Channel only stat. ::= { connUnitPortStatEntry 27 } connUnitPortStatCountClass3Discards Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 306
Channel loop, count only OPNr frames generated. Sequence ::= { connUnitPortStatEntry 32 } connUnitPortStatCountRxLinkResets Syntax OCTET STRING (SIZE (8)) Access read-only Status 34 } connUnitPortStatCountNumberLinkResets Syntax OCTET STRING (SIZE (8)) B-62 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 307
FC Management MIB B Access Status Description Sequence read-only mandatory Count of Link resets and LIPs detected at this port. The number times the reset link protocol is initiated. These are the count of the logical resets, a count of the number of primatives. Note, this is a Fibre Channel only - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 308
is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 41 } connUnitPortStatCountPrimitiveSequenceProtocolErrors Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory B-64 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 309
Status mandatory Description Count of instances of signal loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 43 } connUnitPortStatCountLossofSynchronization Syntax OCTET - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 310
known to the routing algorithm. Note. this is a FC only stat. Sequence ::= { connUnitPortStatEntry 48 } connUnitPortStatCountDelimiterErrors Syntax OCTET STRING (SIZE (8)) Access read-only B-66 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 311
. ::= { connUnitPortStatEntry 49 } connUnitPortStatCountEncodingDisparityErrors Syntax OCTET STRING (SIZE (8)) Access read-only Status mandatory Description Count of disparity errors received at this port. Note, this is a Fibre Channel only stat. Sequence ::= { connUnitPortStatEntry 50 } FC Simple - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 312
an entry for each object registered with this port in the switch. ::= { connUnitServiceTables 1 } connUnitSnsEntry Syntax Access Status Description Sequence FcAddressId, connUnitSnsPortName FcNameId, connUnitSnsNodeName FcNameId, connUnitSnsClassOfSvc B-68 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 313
DisplayString, connUnitSnsSymbolicNodeName DisplayString } FC Management MIB B connUnitSnsId Syntax Access Status Description Sequence OCTET STRING (SIZE (16)) read-only mandatory The connUnitId of the connectivity unit that contains this Name Server table. ::= { connUnitSnsEntry - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 314
Description Sequence FcNameId read-only mandatory The Node Name for this entry in the SNS table. ::= { connUnitSnsEntry 5 } connUnitSnsClassOfSvc Syntax OCTET STRING (SIZE (1)) B-70 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 315
Classes of Service offered by this entry in the SNS table. ::= { connUnitSnsEntry 6 } connUnitSnsNodeIPAddress Syntax OCTET STRING (SIZE(16)) Access read Sequence OCTET STRING (SIZE (1)) read-only mandatory The FC-4 Types supported by this entry in the SNS table. ::= { connUnitSnsEntry 9 } - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 316
entry in the SNS table. ::= { connUnitSnsEntry 10 } connUnitSnsPortIPAddress Syntax OCTET STRING (SIZE(16)) Access read-only Status mandatory Description The IPv6 formatted address of this entry in the SNS The Symbolic Port Name of this entry in the SNS table. B-72 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 317
Group trapMaxClients Syntax Access Status Description Sequence INTEGER read-only mandatory The maximum number of SNMP trap recipients supported by the connectivity unit. ::= { trapReg 1 } trapClientCount Syntax Access Status Description Sequence INTEGER read-only mandatory The current number - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 318
FcEventSeverity, trapRegRowState INTEGER } trapRegIpAddress Syntax Access Status Description Sequence IpAddress read-only mandatory The IP address of a client registered for traps. ::= { trapRegEntry 1 } B-74 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 319
FC Management MIB B trapRegPort Syntax Access Status Description Sequence INTEGER (1..2147483647) read-only mandatory The UDP port to send traps to for this host. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table. ::= { - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 320
enabled to be sent to the target. A value of rowActive or rowInactive must be specified to create a row in the table. ::= { trapRegEntry 4} B-76 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 321
FC Management MIB B Related Traps connUnitStatusChange Enterprise Variables Description Type Summary Severity Category TimeIndex State Sequence fcmgmt { connUnitStatus, connUnitState } The overall status of the connectivity unit has changed. Recommended severity level (for filtering): alert. FA - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 322
: Connection unit sensor status change. Summary FA MIB: Connection unit sensor status change. Severity Minor Category Status Events TimeIndex 1 State OPERATIONAL Sequence ::= 5 B-78 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 323
FC Management MIB B connUnitPortStatusChange Enterprise fcmgmt Variables { connUnitPortStatus, connUnitPortState } Description The overall status of the connectivity unit has changed. Recommended severity level (for filtering): alert. Type FA MIB: Port status change. Summary FA MIB: Port status - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 324
FC Management MIB B B-80 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 325
used by the Sphereon® Fabric switches and the Intrepid® 6064 and 6140 directors (updated to support zoning, port binding, threshold this manual. CONTENTS = MIB Definition for Fibre Channel Switches running McDATA Enterprise Operating System™ firmware. CHANGE 64 to 0..64 (IR #6012). FCEOS.MIB - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 326
eosPortALPAIndex, eosPortFAN, eosPortLIPsGenerated, eosPortLIPsDetected). Support of FL_Ports. Added 64 bit counters and support for 2G Added Port Binding, Threshold { operational (1), redundant-failure (2), minor-failure (3), major-failure (4), not-operational (5) } C-2 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 327
1 Gig fru-gsmr (14), Shortwave, Multi-Mode, MT-RJ connector, 1 Gig fru-gxxr (15), Mixed, MT-RJ connector, 1 Gig fru-fint1 (16), F-Port, internal, 1 Gig fru-xpm (17) XPM Port module, 10 Gig } FcEosFruPosition ::= INTEGER (1..255) FcEosPortIndex ::= INTEGER (1..2048) FcEosPortPhyState ::= INTEGER - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 328
(14), psDegraded (15), psDisabled (16), psInvalidAttach (17), psSegmented (18), other (19) } FcEosPortWWN FcEosPortList LoopPortALPA VirtualPortNPIV ::= OCTET STRING (SIZE (8)) ::= OCTET STRING (SIZE (32)) ::= OCTET STRING (SIZE (16)) ::= OCTET STRING (SIZE(32)) C-4 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 329
McDATA Private Enterprise MIB C Enterprise Specific Object Identifiers mcData OBJECT IDENTIFIER common OBJECT IDENTIFIER commDev OBJECT IDENTIFIER ::= { enterprises 289 } Product lines or generic product information ::= { mcData 1 } ::= { mcData 2 } -- communication devices Fibre Channel product - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 330
read-only Status mandatory Description The current version of the firmware. Sequence ::= { fcEosSys 3 } fcEosSysTypeNum Syntax Access Status Description Sequence DisplayString (SIZE (1..64)) read-only mandatory The ASCII type number of the switch. ::= { fcEosSys 4 } C-6 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 331
fcEosSysModelNum Syntax Access Status Description Sequence DisplayString (SIZE (1..64)) read-only mandatory The ASCII model number of the switch. ::= { fcEosSys 5 } fcEosSysMfg Syntax Access Status Description Sequence DisplayString (SIZE (1..64)) read-only mandatory The ASCII manufacturer of the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 332
The desired administrative status of the switch. A management station may place the switch in a desired state by setting this object accordingly. The desired administrative status are online(1) and offline(2). The online means setting the switch to be accessible by an C-8 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 333
Switch speed capability. It's a user initiated option to adjust the system-wide port speed capability. This object is supported for 2G capable 6064 Director Status Description Sequence DisplayString (SIZE (1..64)) read-write mandatory The ASCII name of the switch. ::= { fcEosSys 15 } - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 334
Description Sequence mandatory The Worldwide Name of the switch. ::= { fcEosSys 16 } fcEosSysNPIV Syntax Access Status Description Sequence TruthValue containing the service parameters of the module. INDEX { fcEosFruCode, fcEosFruPosition } ::= { fcEosFruTable 1 C-10 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 335
This object identifies the position of the module. The value starts from 1 to the maximum number of the cards that can be contained within this switch. ::= { fcEosFruEntry 2 } fcEosFruStatus Syntax INTEGER { unknown(0), active(1), FCEOS.MIB C-11 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 336
. ::= { fcEosFruEntry 4 } fcEosFruSerialNumber Syntax Access Status Description Sequence DisplayString (SIZE (0..64)) read-only mandatory The serial number of the module. ::= { fcEosFruEntry 5 } fcEosFruPowerOnHours Syntax Access Status Counter read-only mandatory C-12 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 337
{ fcEosFruEntry 6 } fcEosFruTestDate Syntax Access Status Description Sequence DisplayString (SIZE (0..64)) read-only mandatory The final test date of the module. ::= { fcEosFruEntry mandatory A table that contains one entry for each switch port. ::= { fcEosPort 1 } fcEosPortEntry TYPE Syntax - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 338
TruthValue, Throughput statistics (32 bit counters) fcEosPortTxWords32 32 bit counters) fcEosPortTxWords32 fcEosPortRxWords32 fcEosPortTxFrames32 fcEosPortRxFrames32 fcEosPortTxThroughput fcEosPortRxThroughput Counter, Counter, Counter, Counter, Counter, Counter, C-14 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 339
Counter, Counter, Counter, Counter, Counter, Counter, Counter, Counter, Class 3 statistics (32 bit counters) fcEosPortTxC3Words32 fcEosPortRxC3Words32 fcEosPortTxC3Frames32 fcEosPortRxC3Frames32 fcEosPortTxC3Octets32 fcEosPortRxC3Octets32 fcEosPortC3Discards32 Counter, Counter, Counter, Counter - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 340
Private Enterprise MIB C Error statistics (32 bit counters) fcEosPortAddrIDErrors Class 3 statistics (64 bit counters) fcEosPortTxC3Words64 fcEosPortRxC3Words64 fcEosPortTxC3Frames64 fcEosPortRxC3Frames64 OCTET STRING, OCTET STRING, OCTET STRING, OCTET STRING, C-16 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 341
STRING, OCTET STRING, Trunking statistics (32 bit counters) fcEosPortTxFlows fcEosPortRxFlows Counter, Counter The fixed physical port number on the switch. It ranges from 1 to the number of physical ports that can be supported in the switch. ::= { fcEosPortEntry 1 } fcEosPortPhyState Syntax - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 342
or per configuration information accessible by the switch, fcEosPortAdmStatus is then changed to either the online(1) or testing(3) states, or remains (3), mu (4), internal-port (5) } read-only mandatory Supported connector types of the port. ::= { fcEosPortEntry 5 } C-18 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 343
McDATA Private Enterprise MIB C fcEosPortDistance Syntax Access Status Description Sequence INTEGER (0..255) read-only mandatory A bit map to represent distance types of the Port. bit 0 unknown bit 1-3 reserved bit 4 long distance (l) bit 5 intermediate distance (i) bit 6 short distance (s) bit 7 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 344
MBytes/Sec bit 3 reserved bit 4 400 MBytes/Sec bit 5 reserved bit 6 1000 MBytes/Sec bit 7 reserved ::= { fcEosPortEntry 9 } fcEosPortConfigSpeed Syntax INTEGER { one-gig (1), two-gig (2), negotiate (3), C-20 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 345
mandatory The operating port speed. ::= { fcEosPortEntry 11 } fcEosPortConfigType Syntax Access INTEGER { gPort (1), fPort (2), ePort (3), flPort (4), fxPort (5), gxPort (6) } read-write McDATA Private Enterprise MIB C FCEOS.MIB C-21 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 346
Sequence TruthValue read-write mandatory This object identifies/configures if the port supports Fabric Address Notification mode. Only applicable for flPorts. ::= { fcEosPortEntry 15 } Throughput statistics (32 bit counters) fcEosPortTxWords32 Syntax Counter C-22 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 347
.) ::= { fcEosPortEntry 20 } fcEosPortRxWords32 Syntax Access Status Description Sequence Counter read-only mandatory A 32 bit counter for the included.) ::= { fcEosPortEntry 21 } fcEosPortTxFrames32 Syntax Access Status Description Sequence Counter read-only mandatory A 32 bit counter for the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 348
read-only mandatory A 32 bit counter for the number of class 2 4-byte words that the port has transmitted. (Primitive signals and primitive sequence are not included.) ::= { fcEosPortEntry 30 } fcEosPortRxC2Words32 Syntax Access Status Counter read-only mandatory C-24 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 349
frames that the port has received. ::= { fcEosPortEntry 33 } fcEosPortTxC2Octets32 Syntax Access Status Description Sequence Counter read-only mandatory A 32 bit counter for the number of Class 2 Octets that the port has transmitted. ::= { fcEosPortEntry 34 } fcEosPortRxC2Octets32 Syntax Counter - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 350
) fcEosPortTxC3Words32 Syntax Access Status Description Sequence Counter read-only mandatory A 32 bit counter for the number of class 3 4-byte words that the port has transmitted. (Primitive signals and primitive sequence are not included.) ::= { fcEosPortEntry 40 } C-26 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 351
3 frames that the port has transmitted. ::= { fcEosPortEntry 42 } fcEosPortRxC3Frames32 Syntax Access Status Description Sequence Counter read-only mandatory A 32 bit counter for the number of Class 3 frames that the port has received. ::= { fcEosPortEntry 43 } fcEosPortTxC3Octets32 Syntax Access - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 352
A 32 bit 32 bit counters) fcEosPortDiscardFrames Syntax Access Status Description Sequence Counter read-only mandatory The number of frames that the port has discarded. ::= { fcEosPortEntry 50 } fcEosPortTxLinkResets Syntax Access Status Counter read-only mandatory C-28 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 353
} fcEosPortTxOLSs Syntax Access Status Description Sequence Counter read-only mandatory The number of offline sequences initiated by this switch port. ::= { fcEosPortEntry 53 } fcEosPortRxOLSs Syntax Access Status Description Sequence Counter read-only mandatory The number of offline sequences - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 354
Syntax Counter Access read-only Status mandatory Description The number of delimiter errors. Sequence ::= { fcEosPortEntry 59 } fcEosPortSyncLosses Syntax Access Status Description Counter read-only mandatory The number of loss of synchronization timeouts. C-30 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 355
Access Status Description Sequence Counter read-only mandatory The number of protocol errors detected. ::= { fcEosPortEntry 62 } fcEosPortInvalidTxWords Syntax Counter Access read- Counter read-only mandatory The number of transitions to an LFx state. ::= { fcEosPortEntry 64 } FCEOS.MIB C-31 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 356
errors 64 bit counter for the number of words within frames that the port has transmitted. (Primitive signals and primitive sequence are not included.) ::= { fcEosPortEntry 67 } fcEosPortRxWords64 Syntax Access Status OCTET STRING (SIZE (8)) read-only mandatory C-32 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 357
Status Description Sequence OCTET STRING (SIZE (8)) read-only mandatory A 64 bit counter for the number of (Fibre Channel) frames that the Syntax Access Status Description Sequence OCTET STRING (SIZE (8)) read-only mandatory A 64 bit counter for the number of (Fibre Channel) frames that the port - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 358
for the number of Class 2 frames that the port has received. ::= { fcEosPortEntry 74 } fcEosPortTxC2Octets64 Syntax Access Status Description OCTET STRING (SIZE (8)) read-only mandatory A 64 bit counter for the number of Class 2 Octets that the port has transmitted. C-34 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 359
primitive sequence are not included.) ::= { fcEosPortEntry 77 } fcEosPortRxC3Words64 Syntax Access Status Description Sequence OCTET STRING (SIZE (8)) read-only mandatory A 64 bit counter for the number of class 3 4-byte words that the port has received. (Primitive signals and primitive sequence - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 360
for the number of Class 3 Octets that the port has transmitted. ::= { fcEosPortEntry 81 } fcEosPortRxC3Octets64 Syntax Access Status Description OCTET STRING (SIZE (8)) read-only mandatory A 64 bit counter for the number of Class 3 Octets that the port has received. C-36 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 361
Status Description Sequence OCTET STRING (SIZE (8)) read-only mandatory A 64 bit counter for the number of Class 3 frames that the port has discarded. ::= { fcEosPortEntry 83 } Trunking statistics (32 bit counters) fcEosPortTxFlows Syntax Access Status Description Sequence Counter read-only - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 362
. ::= { fcEosPortEntry 140 } fcEosPortLinkEvent Syntax Access Status Description Sequence INTEGER { bit-error (1), loss-of-signal fcEosPortLinkEventTime Syntax Access Status Description Sequence DisplayString (SIZE (1..64)) read-only mandatory The time at which the last 38 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 363
Status Description Sequence mandatory A string describing the addressed port. ::= { fcEosPortEntry 152 } McDATA Private Enterprise MIB C fcEosPortWWN Syntax Access Status Description Sequence FcEosPortWWN read-only mandatory The Port WWN. ::= { fcEosPortEntry 153 } NPIV Information - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 364
} fcEosPortBindingIndex Syntax Access Status Description Sequence FcEosPortIndex read-only mandatory The fixed physical port number on the switch. It ranges from 1 to the number of physical ports that can be supported in the switch. ::= { fcEosPortBindingEntry 1 } C-40 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 365
Description The authorized port WWN for attached servers and storage systems (F ports), or the authorized switch WWN for attached switches (E ports). Sequence ::= { fcEosPortBindingEntry 3 } fcEosPortAttachedWWN Syntax Access Status Description Sequence FcEosPortWWN read-only mandatory The WWN - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 366
The set state of the default zone set (1=Enabled,2= Disabled). Sequence ::= { fcEosZoning 3 } fcEosActiveZoneSetState Syntax INTEGER{ enabled(1), disabled(2) } Access read-only Status mandatory C-42 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 367
McDATA Private Enterprise MIB C Description Sequence The state of the active zone set. If the active zone set state is disabled, then ActiveZoneSetName and ActiveZoneSetCount are invalid (1=Enabled,2= Disabled). ::= { fcEosZoning 4 } fcEosHardwareEnforcedZoning Syntax INTEGER{ yes (1), no (2) } - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 368
INTEGER Access read-only Status mandatory Description This object contains a count of the number of members in this zone entry. Sequence ::= { fcEosActiveZoneEntry 3 } C-44 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 369
Active Member Table McDATA Private Enterprise MIB C fcEosActiveMemberTable Syntax SEQUENCE OF FcEosActiveMemberEntry Access not-accessible Status mandatory Description A table that contains one entry for each member in the active zone set. Sequence ::= { fcEosZoning 7 } fcEosActiveMemberEntry - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 370
only valid if the member type is 1, otherwise it will return all zeros. ::= { fcEosActiveMemberEntry 4 } fcEosMemberDomainID Syntax Access Status INTEGER read-only mandatory C-46 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 371
McDATA Private Enterprise MIB C Description Sequence The domain ID. This value is only valid if the member type is 2, otherwise it will return NULL. ::= { fcEosActiveMemberEntry 5 } fcEosMemberPortNumber Syntax INTEGER Access read-only Status mandatory Description The port number. This value is - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 372
triggered. ::= { fcEosTAEntry 1 } fcEosTAName Syntax Access Status Description Sequence DisplayString (SIZE (1..64)) read-only mandatory The threshold alert name. ::= { fcEosTAEntry 2 } fcEosTAState Syntax Access INTEGER { enabled (1), disabled (2) } read-only C-48 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 373
Status Description Sequence mandatory The current state of the threshold. ::= { fcEosTAEntry 3 } McDATA Private Enterprise MIB C fcEosTAType Syntax Access Status Description Sequence INTEGER { throughput (1), counter (2) } read-only mandatory The type of the threshold. ::= { fcEosTAEntry 4 } - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 374
the amount of time during a threshold alert interval that the trigger must be exceeded before an alert is generated. Sequence ::= { fcEosTAEntry 10 } C-50 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 375
McDATA Private Enterprise MIB C fcEosCTACounter Syntax Access Status Description Sequence INTEGER read-only mandatory This only applies when the alert type is a Counter Threshold Alert. It specifies statistical counter or counter set to be monitored. ::= { fcEosTAEntry 11 } FCEOS.MIB C-51 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 376
whenever the switch detects that a port binding violation occurs. Sequence ::= 3 fcEosThresholdAlert Enterprise Variables Description Sequence mcData { fcEosPortIndex, fcEosTAIndex } An fcEosThresholdAlert(4) is generated whenever a threshold alert occurs. ::= 4 C-52 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 377
MIB C New traps added for EOS 6.0: These are intended to make it easier to interface the switch traps with management applications. fcEosFruRemoved Enterprise Variables Description Sequence mcData { fcEosFruCode, fcEosFruPosition, fcEosSysSwitchName, fcEosSysSwitchId } A fcEosFruRemoved trap - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 378
fcEosSysSwitchId } A fcEosLinkBitErrorEvent trap is generated when the bit error rate for a link exceeds an allowed threshold. ::= 10 fcEosLinkNOSEvent Enterprise Variables mcData { fcEosPortIndex, fcEosPortName, fcEosPortWWN, fcEosSysSwitchName, fcEosSysSwitchId } C-54 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 379
Variables Description Sequence mcData { fcEosPortIndex, fcEosPortName, fcEosPortWWN, fcEosSysSwitchName, fcEosSysSwitchId } A fcEosLinkAddedEvent trap is generated when the firmware detects that a new connection has been established on a port. ::= 15 FCEOS Enterprise-specific Trap Definitions - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 380
McDATA Private Enterprise MIB C C-56 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 381
D SNMP Framework MIB SNMP Framework MIB Extracted from RFC 2271 October 1998, Ramanathan R. Kavasseri Copyright (c) 1998 by cisco Systems, Inc. All rights reserved. This mib was extracted from RFC 2271. SNMP-FRAMEWORK-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 382
the IP address of the SNMP entity, or the MAC address of one of the interfaces, with each address suitably padded with random D-2 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 383
IPv4 address (4 octets) lowest non-special IP address. 2 IPv6 address (16 octets) lowest non-special IP address. 3 MAC address (6 octets) lowest IEEE 27. SnmpSecurityModel Syntax Status Description OCTET STRING (SIZE(1..32)) current An identifier that uniquely identifies a securityModel of - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 384
rules. As of this writing, there are several values of securityModel defined for use with SNMP or reserved for use with supporting MIB Objects. They are as follows: 0 reserved for 'any' 1 reserved for SNMPv1 2 reserved for SNMPv2c 3 User-Based Security Model (USM) SnmpMessageProcessingModel - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 385
SNMP Framework MIB D Description An identifier that uniquely identifies a Message Processing Model of the Message Processing Subsystem within a SNMP Management Architecture. The values for messageProcessingModel are allocated as follows: • Values between 0 and 255, inclusive, are reserved for - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 386
, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. D-6 E/OS SNMP - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 387
be specified so that the number sub-identifiers for any object instance do not exceed the limit of 128, as defined by [RFC1905]. OCTET STRING (SIZE (0..255)) Administrative assignments snmpFrameworkAdmin OBJECT ::= { IDENTIFIE snmpFrameworkMIB 1 } R snmpFrameworkMIBObjects OBJECT ::= { IDENTIFIE - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 388
Privacy Protocols snmpAuthProtocols Status Description Sequence current Registration point for standards-track authentication protocols used in SNMP Management Frameworks. ::= { snmpFrameworkAdmin 1 } snmpPrivProtocols Status current D-8 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 389
SNMP Framework MIB D Description Sequence Registration point for standards-track privacy protocols used in SNMP Management Frameworks. ::= { snmpFrameworkAdmin 2 } Conformance information snmpFrameworkMI OBJECT BCompliances IDENTIFIER snmpFrameworkMI OBJECT BGroups IDENTIFIER ::= { - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 390
SNMP Framework MIB D D-10 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 391
E MIB II Groups in MIB II Removed EGP group (lxw) Rename the MIB from rfc1213.mib to mib2.mib May 14, 2002 lxw RFC1213-MIB DEFINITIONS ::= BEGIN IMPORTS mgmt, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; This MIB module uses the extended OBJECT- - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 392
identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters. ::= { system 1 } E-2 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 393
MIB II E sysObjectID Syntax Access Status Description Sequence OBJECT IDENTIFIER read-only mandatory The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 394
have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) E-4 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 395
Sequence For systems including OSI protocols, layers 5 and 6 may also be counted. ::= { system 7 } MIB II E Interfaces group Implementation of the Interfaces group is mandatory for all systems. ifNumber Syntax Access Status Description Sequence Interfaces table INTEGER read-only mandatory - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 396
, INTEGER, INTEGER, TimeTicks, Counter, Counter, Counter, Counter, Counter, Counter, Counter, Counter, Counter, Counter, Counter, Gauge, OBJECT IDENTIFIER } ifIndex Syntax Access INTEGER read-only E-6 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 397
MIB II E Status Description Sequence mandatory A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization. - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 398
MIB II E Access Status Description Sequence hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), -- T-1 e1(19), -- european equiv. of T-1 basicISDN(20), primaryISDN(21), -- proprietary serial propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), -- CLNP over IP [11] - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 399
MIB II E Description Sequence The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. ::= { ifEntry 4 } - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 400
Access Status Description Sequence Counter read-only mandatory The total number of octets received on the interface, including framing characters. ::= { ifEntry 10 } E-10 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 401
Syntax Access Status Description Sequence Counter read-only mandatory The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 402
Sequence The number of inbound packets that contained errors preventing them from being deliverable to a higher- the interface, including framing characters." ::= { ifEntry 16 } ifOutUcastPkts Syntax Access Status Description Sequence Counter Syntax Counter E-12 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 403
of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason outbound packets that could not be transmitted because of errors. ::= { ifEntry 20 } ifOutQLen Syntax Access Status Description Sequence Gauge read- - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 404
X.121 addresses is required, the translation table contains the NetworkAddress to X.121 address equivalences. atTable Syntax Access SEQUENCE OF AtEntry not-accessible E-14 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 405
MIB II E Status Description Sequence deprecated The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 406
of the IP group is mandatory for all systems. ipForwarding Syntax Access INTEGER { forwarding(1), -- acting as a gateway not-forwarding(2) -- NOT acting as a gateway } read-write E-16 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 407
. ::= { ip 2 } ipInReceives Syntax Access Status Description Sequence Counter read-only mandatory The total number of input datagrams received from interfaces, including those received in error. ::= { ip 3 } ipInHdrErrors Syntax Access Status Counter read-only mandatory Groups in MIB II E-17 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 408
of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options { ip 6 } ipInUnknownProtos Syntax Access Counter read-only E-18 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 409
::= { ip 7 } ipInDiscards Syntax Access Status Description Sequence Counter read-only mandatory The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 410
Description Sequence Counter read-only mandatory The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., at this entity. ::= { ip 13 } ipReasmReqds Syntax Counter E-20 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 411
by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP of fragments by combining them as they are received. ::= { ip 16 } ipFragOKs Syntax Access Status Description Sequence Counter read-only mandatory The number - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 412
ipAddrTable Syntax Access Status Description Sequence SEQUENCE OF IpAddrEntry not-accessible mandatory The table of addressing information relevant to this entity's IP addresses. ::= { ip 20 } ipAddrEntry Syntax Access Status IpAddrEntry not-accessible mandatory E-22 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 413
MIB II E Description Sequence The addressing information for one of this entity's IP addresses. INDEX { ipAdEntAddr } ::= { ipAddrTable 1 } IpAddrEntry ::= SEQUENCE { ipAdEntAddr IpAddress, ipAdEntIfIndex INTEGER, ipAdEntNetMask IpAddress, ipAdEntBcastAddr ipAdEntReasmMaxSize INTEGER, - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 414
table contains an entry for each route presently known to this entity. ipRouteTable Syntax Access Status SEQUENCE OF IpRouteEntry not-accessible mandatory E-24 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 415
Description Sequence This entity's IP Routing table. ::= { ip 21 } ipRouteEntry Syntax Access Status Description Sequence IpRouteEntry not-accessible mandatory A route to a particular destination. INDEX { ipRouteDest } ::= { ipRouteTable 1 } IpRouteEntry ::= SEQUENCE { ipRouteDest - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 416
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's E-26 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 417
MIB II E Sequence ipRouteProto value. If this metric is not used, its value should be set to -1. ::= { ipRouteEntry 4 } ipRouteMetric3 Syntax Access Status Description Sequence INTEGER read-write mandatory An alternate routing metric for this route. The semantics of this metric are determined by - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 418
the relevant ipRouteType object. ::= { ipRouteEntry 8 } ipRouteProto Syntax INTEGER { other(1), -- none of the following non-protocol information, e.g., manually configured local(2), -- entries set via a network netmgmt(3), -- management protocol obtained via ICMP, icmp(4), -- e.g., Redirect the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 419
via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. ::= { ipRouteEntry 9 } ipRouteAge Syntax Access Status Description Sequence INTEGER read-write mandatory The number of seconds since this route - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 420
valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value. ::= { ipRouteEntry 13 } E-30 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 421
MIB II E IP Address Translation table The IP address translation table contain the IpAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 422
::= { ipNetToMediaEntry 3 } ipNetToMediaType Syntax Access Status Description INTEGER { other(1), -- none of the following invalid(2), -- an invalidated mapping dynamic(3), static(4) } read-write mandatory The type of mapping. E-32 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 423
MIB II E Sequence Additional IP objects Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 424
of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). ::= { icmp 2 } Description Sequence Counter read-only mandatory The number of ICMP Parameter Problem messages received. ::= { icmp 5 } E-34 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 425
icmpInSrcQuenchs Syntax Access Status Description Sequence Counter read-only mandatory The number of ICMP Source Quench messages received. ::= { icmp 6 } icmpInRedirects Syntax Access Status Description Sequence Counter read-only mandatory The number of ICMP Redirect messages received. ::= { icmp - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 426
12 } icmpInAddrMaskReps Syntax Access Status Description Sequence Counter read-only mandatory The number of ICMP Address Mask Reply messages received. ::= { icmp 13 } E-36 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 427
entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such of ICMP Destination Unreachable messages sent. ::= { icmp 16 } icmpOutTimeExcds Syntax Access Counter read-only Groups in MIB II E- - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 428
Description Sequence Counter read-only mandatory The number of ICMP Parameter Problem messages sent. ::= { icmp 18 } icmpOutSrcQuenchs Syntax Access Status hosts do not send redirects. ::= { icmp 20 } icmpOutEchos Syntax Access Status Counter read-only mandatory E-38 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 429
Description Sequence The number of ICMP Echo (request) messages sent. ::= { icmp 21 } MIB II E icmpOutEchoReps Syntax Access Status Description Sequence Counter read-only mandatory The number of ICMP Echo Reply messages sent. ::= { icmp 22 } icmpOutTimestamps Syntax Access - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 430
The algorithm used to determine the timeout value used for retransmitting unacknowledged octets. ::= { tcp 1 } tcpRtoMin Syntax Access Status INTEGER read-only mandatory E-40 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 431
Syntax Access Status Description Sequence INTEGER read-only mandatory The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1. ::= { tcp 4 } tcpActiveOpens Syntax Access Status - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 432
times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. ::= { tcp 8 } E-42 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 433
Syntax Access Status Description Sequence Counter read-only mandatory The total number of segments received, including those received in error. This count includes segments received on currently established connections. ::= { tcp 10 } tcpOutSegs Syntax Access Status Description Sequence Counter - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 434
after) the connection makes the transition to the CLOSED state. INDEX { tcpConnLocalAddress, tcpConnLocalPort, tcpConnRemAddress, tcpConnRemPort } ::= { tcpConnTable 1 } TcpConnEntry ::= SEQUENCE { tcpConnState tcpConnLocalAddress INTEGER, IpAddress, E-44 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 435
tcpConnLocalPort tcpConnRemAddress tcpConnRemPort INTEGER (0..65535), IpAddress, INTEGER (0..65535) } MIB II E tcpConnState Syntax Access Status Description Sequence INTEGER { closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 436
connection. ::= { tcpConnEntry 4 } tcpConnRemPort Syntax Access Status Description Sequence INTEGER (0..65535) read-only mandatory The remote port number for this TCP connection. ::= { tcpConnEntry 5 } E-46 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 437
objects MIB II E tcpInErrs Syntax Access Status Description Sequence Counter read-only mandatory The total number of segments received in error (e.g., bad TCP checksums). ::= { tcp 14 } tcpOutRsts Syntax Access Status Description Sequence UDP group Counter read-only mandatory The number of - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 438
is currently accepting datagrams. udpTable Syntax Access Status Description Sequence SEQUENCE OF UdpEntry not-accessible mandatory A table containing UDP listener information. ::= { udp 5 } E-48 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 439
MIB II E udpEntry Syntax Access Status Description Sequence UdpEntry not-accessible mandatory Information about a particular current UDP listener. INDEX { udpLocalAddress, udpLocalPort } ::= { udpTable 1 } UdpEntry ::= SEQUENCE { udpLocalAddress IpAddress, udpLocalPort INTEGER (0..65535) } - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 440
-valued in those SNMP implementations that are optimized to support only those functions specific to either a management agent to the SNMP entity from the transport service. ::= { snmp 1 } snmpOutPkts from the SNMP protocol entity to the transport service. ::= { snmp 2 } snmpInBadVersions Syntax - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 441
. Sequence ::= { snmp 5 } snmpInASNParseErrs Syntax Access Status Description Sequence Counter read-only mandatory The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages. ::= { snmp 6 } - { snmp 7 } is not used snmpInTooBigs Syntax - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 442
the SNMP protocol entity and for which the value of the error-status field is `badValue'. ::= { snmp 10 } error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the E-52 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 443
read-only mandatory The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'. ::= { snmp 12 } snmpInTotalReqVars Syntax Access Status Description Sequence Counter read-only mandatory The total number of MIB objects - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 444
Get-Next PDUs which have been accepted and processed by the SNMP protocol entity. ::= { snmp 16 } snmpInSetRequests Syntax Access Status Description Sequence Counter read-only mandatory The total number of SNMP Set accepted and processed by the SNMP protocol entity. E-54 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 445
is `tooBig.' ::= { snmp 20 } snmpOutNoSuchNames Syntax Access Status Description Sequence Counter read-only mandatory he total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'. ::= { snmp 21 } snmpOutBadValues Syntax - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 446
number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'. ::= { snmp 22 } { snmp 23 } is not used snmpOutGenErrs Syntax Access have been generated by the SNMP protocol entity. ::= { snmp 26 } E-56 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 447
MIB II E snmpOutSetRequests Syntax Access Status Description Sequence Counter read-only mandatory The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity. ::= { snmp 27 } snmpOutGetResponses Syntax Access Status Description Sequence Counter read-only - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 448
be stored in non-volatile memory so that it remains constant between re-initializations of the network management system. ::= { snmp 30 } END E-58 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 449
Management MIB FCFE.MIB April 24, 2000 Fabric Element Management MIB, Version 1.10 The following deprecated objects are not supported: FPortFlogiTable { fcFeOp 2 } (3) the maximum value is 2147383647 (2^31 - 1) instead of 4294967295 (2^32 - 1) due to the the restriction of the MIB compiler (mibcomp - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 450
8 bytes while the first nibble identifies the format of the Name_Identifier with hex values: 0: ignored 1: IEEE 48-bit address, 2: IEEE extended, 3: Locally assigned, F-2 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 451
MIB F 4: 32-bit IP address 128..2112) Receive Data_Field Size FcBbCredit ::= INTEGER (0..32767) Buffer-to-buffer Credit FC-PH version FcphVersion ::= INTEGER (0..255) Class 1 Stacked Connect Support/Mode FcStackedConnMode ::= INTEGER { none (1), transparent (2), lockedDown (3) } Class of Service - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 452
266 Mbaud (25.0MB/s) half (8), -- 532 Mbaud (50.0MB/s) full (16), -- 1 Gbaud (100MB/s) double (32), -- 2 Gbaud (200MB/s) quadruple (64) -- 4 Gbaud (400MB/s) } Baud Rate Capability Set Fc0BaudRateCap ::= INTEGER (0.. (m6) bit 4 video cable (tv) bit 5 miniature cable (mi) F-4 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 453
unknown (1), sm (2), m5 (4), m6 (8), tv (16), mi (32), stp (64), tw (128), lv (256) } The FC-0 transmitter type of a port Fc0TxType ::= INTEGER { unknown (1), longWaveLaser (2), (LL) shortWaveLaser (3), (SL) longWaveLED (4), (LE) electrical (5), (EL - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 454
the configuration and service parameters of the Fabric Element and the FxPorts. The group represents a set of parameters associated with the Fabric Element or an FxPort to support its NxPorts. } fcElementName Syntax Access FcNameId read-only -- instead of read-write F-6 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 455
Fabric Element Management MIB F Status Description Sequence mandatory The Name_Identifier of the Fabric Element. ::= { fcFeConfig 2 } fcFeModuleCapacity Syntax Access Status Description Sequence The Module Table. FcFeModuleCapacity read-only mandatory The maximum number of modules in the Fabric - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 456
name and version identification of the module. It should contain printable ASCII characters. ::= { fcFeModuleEntry 2 } fcFeModuleObjectID Syntax Access Status OBJECT IDENTIFIER read-only mandatory F-8 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 457
and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16 PlugInCard.' ::= { fcFeModuleEntry 3 } fcFeModuleOperStatus Syntax Access Status Description Sequence INTEGER { online (1), -- functional offline (2), -- not available testing (3), -- under testing faulty (4) -- defective - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 458
Syntax Access Status Description Sequence SEQUENCE OF FcFxConfEntry not-accessible mandatory A table that contains, one entry for each FxPort in the Fabric Element, configuration and service parameters of the FxPorts." ::= { fcFeConfig 5 } F-10 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 459
Description Sequence FcFxConfEntry not-accessible mandatory An entry containing the configuration and service parameters of a FxPort. INDEX { fcFxConfModuleIndex, fcFxConfFxPortIndex } ::= { fcFxConfTable 1 } FcFxConfEntry ::= SEQUENCE { fcFxConfModuleIndex fcFxConfFxPortIndex , fcFxPortName - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 460
read-only mandatory The name identifier of this FxPort. Each FxPort has a unique port name within the address space of the Fabric. F-12 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 461
::= { fcFxConfEntry 3 } FxPort common service parameters Fabric Element Management MIB F fcFxPortFcphVersionHigh Syntax FcphVersion Access read-only Status mandatory Description The highest or most recent version of FC-PH that the FxPort is configured to support. Sequence ::= { fcFxConfEntry - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 462
Description Sequence MilliSeconds read-only mandatory The E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition. ::= { fcFxConfEntry 9 } F-14 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 463
fcFxPortCosSupported Syntax Access Status Description Sequence FcCosCap read-only mandatory A value indicating the set of Classes of Service supported by the FxPort. ::= { fcFxConfEntry 10 } fcFxPortIntermixSupported Syntax INTEGER { yes (1), no (2) } Access read-only Status mandatory Description - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 464
or not Class 2 Sequential Delivery is supported by the FxPort. ::= { fcFxConfEntry 13 or not Class 3 Sequential Delivery is supported by the FxPort. ::= { fcFxConfEntry 14 . The value 0 means that the FxPort does not support this parameter." ::= { fcFxConfEntry 15 } fcFxPortBaudRate Syntax Access - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 465
Fabric Element Management MIB F fcFxPortMedium Syntax Access Status Description Sequence Fc0Medium read-only deprecated The FC-0 medium of the FxPort. ::= { fcFxConfEntry 17 } fcFxPortTxType Syntax Access Status Description Sequence Fc0TxType read-only deprecated The FC-0 transmitter type of the - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 466
Operation table This group consists of tables that contains operational status and established service parameters for the Fabric Element and the attached NxPorts. Implementation of this group FcFeModuleIndex, FcFeFxPortIndex, FcAddressId, FcPortName, FcAddressId, F-18 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 467
fcFxPortBbCreditAvailable fcFxPortOperMode fcFxPortAdminMode Fabric Element Management MIB F Gauge, FcFxPortMode, FcFxPortMode } fcFxPortOperModuleIndex Syntax FcFeModuleIndex Access read-only Status mandatory Description This object identifies the module containing the FxPort for which this entry - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 468
receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. Sequence ::= { fcFxPortOperEntry 6 } F-20 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 469
for each F_Port in the Fabric Element, the Service Parameters that have been established from the most recent Fabric Login (implicit or explicit). NOTE WELL: This table is deprecated since FEMIB v1.9. It is not supported in Silkworm agent after firmware v1.5. Instead, the new table, FxPort Fabric - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 470
This object identifies the module containing the FxPort for which this entry contains information. Sequence ::= { fcFxPortPhysEntry 1 } fcFxPortPhysFxPortIndex Syntax FcFeFxPortIndex Access read-only F-22 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 471
for the identified FxPort until the module is re-initialized. ::= { fcFxPortPhysEntry 2 } fcFxPortPhysAdminStatus Syntax INTEGER { online (1), -- place port online offline (2), -- take port offline testing (3) -- initiate test procedures } Access read-write Status mandatory Description The - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 472
state if and only if there is a fault that prevents it from going to the online(1) state. ::= { fcFxPortPhysEntry 4 } fcFxPortPhysLastChange Syntax Access Status Description Sequence TimeTicks read-only to detect Loss of Synchronization. ::= { fcFxPortPhysEntry 6 } F-24 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 473
Element Management MIB F FxPort Fabric Login table This table contains, one entry for each FxPort in the Fabric Element, the Service Parameters that have been established from the most recent Fabric Login, implicit or explicit. fcFxlogiTable Syntax Access Status Description Sequence SEQUENCE - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 474
value remains constant for the identified FxPort until the module is re-initialized. ::= { fcFxlogiEntry 2 } fcFxlogiNxPortIndex Syntax Access Status FcFeNxPortIndex read-only mandatory F-26 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 475
mandatory Description The version of FC-PH that the FxPort has agreed to support from the Fabric Login Sequence ::= { fcFxlogiEntry 4 } fcFxPortNxPortBbCredit Syntax Access The value is in number of bytes and ranges from 128 to 2112 inclusive. Sequence ::= { fcFxlogiEntry 6 } FCFE.MIB F-27 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 476
NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request. is only valid if Class 1 service is supported. Sequence ::= { fcFxlogiEntry 8 agreed to support stacked connect from the Fabric Login. This is only meaningful if Class 1 service has been - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 477
read-only Status mandatory Description A flag indicating whether the FxPort has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if Class 3 service has been agreed. Sequence ::= { fcFxlogiEntry 11 } fcFxPortNxPortName Syntax Access Status Description - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 478
contains, one entry for each FxPort in the Fabric Element, counters recording numbers of errors detected since the management agent re-initialized. The first 6 columnar objects after the FxPort, counters that record the numbers of errors detected. ::= { fcFeError 1 } F-30 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 479
Syntax Access Status Description Sequence FcFxPortErrorEntry not-accessible mandatory An entry containing error counters of a FxPort. INDEX { fcFxPortErrorModuleIndex, fcFxPortErrorFxPortIndex } ::= { fcFxPortErrorTable 1 } FcFxPortErrorEntry ::= SEQUENCE { fcFxPortErrorModuleIndex - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 480
synchronization detected by the FxPort. ::= { fcFxPortErrorEntry 4 } fcFxPortSigLosses SYNTAX Access Status Description Counter read-only mandatory The number of loss of signal detected by the FxPort. F-32 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 481
MIB F fcFxPortPrimSeqProtoErrors SYNTAX Counter Access read-only Status mandatory Description The number of primitive sequence protocol errors detected by the FxPort. Sequence ::= { fcFxPortErrorEntry 6 } fcFxPortInvalidTxWords SYNTAX Access Status Description Sequence Counter read-only mandatory - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 482
Status Description Sequence Counter read-only mandatory The number of address identifier errors detected by this FxPort. ::= { fcFxPortErrorEntry 10 } fcFxPortLinkResetIns SYNTAX number of Offline Sequence received by this FxPort. ::= { fcFxPortErrorEntry 13 } F-34 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 483
Fabric Element Management MIB F fcFxPortOlsOuts SYNTAX Access Status Description Sequence Counter read-only mandatory The number of Offline Sequence issued by this FxPort. ::= { fcFxPortErrorEntry 14 } Accounting Groups Class 1 Accounting table (1) Class 1 Accounting Group, (2) Class 2 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 484
identifies the module containing the FxPort for which this entry contains information. Sequence ::= { fcFxPortC1AcctEntry 1 } fcFxPortC1AcctFxPortIndex Syntax FcFeFxPortIndex Access read-only Status mandatory F-36 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 485
Fabric Element Management MIB F Description Sequence This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. ::= { - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 486
(other than Class 1 connect-request) received by this FxPort from its attached NxPort. ::= { fcFxPortC1AcctEntry 8 } fcFxPortC1OutFrames SYNTAX Access Status Counter read-only mandatory F-38 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 487
Fabric Element Management MIB F Description Sequence The number of Class 1 frames (other than Class 1 connect-request) delivered through this FxPort to its attached NxPort. ::= { fcFxPortC1AcctEntry 9 } fcFxPortC1InOctets SYNTAX Access Status Description Sequence Counter read-only mandatory The - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 488
::= { fcFxPortC2AcctTable 1 } FcFxPortC2AcctEntry ::= SEQUENCE { fcFxPortC2AcctModuleIndex fcFxPortC2AcctFxPortIndex fcFxPortC2InFrames fcFxPortC2OutFrames fcFxPortC2InOctets fcFxPortC2OutOctets FcFeModuleIndex, FcFeFxPortIndex, Counter, Counter, Counter, Counter, F-40 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 489
fcFxPortC2Discards fcFxPortC2FbsyFrames fcFxPortC2FrjtFrames Fabric Element Management MIB F Counter, Counter, Counter } fcFxPortC2AcctModuleIndex Syntax FcFeModuleIndex Access read-only Status mandatory Description This object identifies the module containing the FxPort for which this entry - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 490
NxPort. ::= { fcFxPortC2AcctEntry 6 } fcFxPortC2Discards SYNTAX Access Status Description Sequence Counter read-only mandatory The number of Class 2 frames discarded by this FxPort. ::= { fcFxPortC2AcctEntry 7 } F-42 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 491
Fabric Element Management MIB F fcFxPortC2FbsyFrames SYNTAX Access Status Description Sequence Counter read-only mandatory The number of F_BSY frames generated by this FxPort against Class 2 frames. ::= { fcFxPortC2AcctEntry 8 } fcFxPortC2FrjtFrames SYNTAX Access Status Description Sequence - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 492
identifies the module containing the FxPort for which this entry contains information. Sequence ::= { fcFxPortC3AcctEntry 1 } fcFxPortC3AcctFxPortIndex Syntax FcFeFxPortIndex Access read-only Status mandatory F-44 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 493
Fabric Element Management MIB F Description Sequence This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. ::= { - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 494
consists of a table describing information about what each FxPort is inherently capable of operating or supporting. A capability may be used, as expressed in its respective object value in the capabilities of the port within the Fabric Element. ::= { fcFeCap 1 } F-46 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 495
Fabric Element Management MIB F fcFxPortCapEntry Syntax Access Status Description Sequence FcFxPortCapEntry not-accessible mandatory An entry containing the capabilities of a FxPort. INDEX { fcFxPortCapModuleIndex, fcFxPortCapFxPortIndex } ::= { fcFxPortCapTable 1 } FcFxPortCapEntry ::= - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 496
read-only Status mandatory Description The highest or most recent version of FC-PH that the FxPort is capable of supporting. Sequence ::= { fcFxPortCapEntry 3 } fcFxPortCapFcphVersionLow Syntax FcphVersion Access read-only Status mandatory Description The lowest or earliest version of FC-PH that - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 497
Fabric Element Management MIB F fcFxPortCapBbCreditMax Syntax FcBbCredit Access read-only Status mandatory Description The maximum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort. Sequence ::= { fcFxPortCapEntry 5 } - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 498
only valid if the port is capable of supporting Class 1 service. ::= { fcFxPortCapEntry 10 } fcFxPortCapStackedConnMode Syntax supporting. Sequence ::= { fcFxPortCapEntry 11 } fcFxPortCapClass2SeqDeliv Syntax INTEGER { yes (1), no (2) } Access read-only F-50 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 499
Access read-only Status mandatory Description The maximum holding time (in microseconds) that the FxPort is capable of supporting. Sequence ::= { fcFxPortCapEntry 14 } fcFxPortCapHoldTimeMin Syntax MicroSeconds Access read-only Status mandatory Description The minimum holding time (in microseconds - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 500
capable of supporting. This variable has been deprecated and may be implemented for backward compability. ::= { fcFxPortCapEntry 16 } supporting. This variable has been deprecated and may be implemented for backward compability. ::= { fcFxPortCapEntry 17 } END F-52 E/OS SNMP Support Manual - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 501
2-61 FxPort capability table 2-91 FxPort configuration table 2-68 FxPort error table 2-82 FxPort fabric login table 2-78 FxPort operation table 2-97 description of 2-96 event table 2-119 fcConnUnitTable 2-98 firmware table 2-106 link table 2-122 name server table 2-141 port 65 Fc0MediaCap 2-64 i-1 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 502
Index Fc0Medium 2-64 Fc0TxType 2-64 FcAddressId 2-62 FcBbCredit 2-62 FcBbCreditModel 2-66 FcConnUnitContact 2-105 2-118 i-2 E/OS SNMP Support Manual fcConnUnitPortIndex 2-109 fcConnUnitPortModuleType 2-113 2-140 FcConnUnitPortStatCountBBCreditZe- ro 2-128 FcConnUnitPortStatCountClass1FBSYFr - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 503
FcConnUnitPortStatCountFramesTrun- cated 2-140 FcConnUnitPortStatCountInputBuffers- Full 2-128 FcConnUnitPortStatCountInvalidCRC 2-137 FcConnUnitPortStatCountInvalidOr tObjects 2-135 FcConnUnitPortStatCountRxElements 2-128 FcConnUnitPortStatCountRxLinkResets 2-135 FcConnUnitPortStatCountRxMulticas- - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 504
2-87 FcFxPortC1FbsyFrames 2-85 FcFxPortC1FrjtFrames 2-86 FcFxPortC1InConnections 2-85 FcFxPortC1InFrames 2-86 i-4 E/OS SNMP Support Manual FcFxPortC1InOctets 2-87 FcFxPortC1OutConnections 2-85 FcFxPortC1OutFrames 2-87 FcFxPortC1OutOctets 2-87 fcFxPortC2AcctFxPortIndex 2-88 FcFxPortC2Discards 2-89 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 505
FcFxPortFcphVersionLow 2-70 FcFxPortHoldTime 2-72 FcFxPortID 2-74 FcFxPortIntermixSuppAgreed 2-80 fcFxPortIntermixSupported 2-71 FcFxPortInvalidCrcs 2-83 FcFxPortInvalidTxWords 2-83 FcFxPortLinkFailures 2-82 FcFxPortLinkResetIns 2-84 FcFxPortLinkResetOuts 2-84 FcFxPortMedium 2-73 FcFxPortMode 2-66 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 506
32 ipFragCreates 2-35 ipFragFails 2-35 ipFragOKs 2-35 ipInAddrErrors 2-32 ipInDelivers 2-33 ipInDiscards 2-33 ipInHdrErrors 2-32 ipInReceives 2-32 2-55 snmpInBadValues 2-56 i-6 E/OS SNMP Support Manual snmpInBadVersions 2-55 snmpInGenErrs 2-57 snmpInGetNexts 2-57 snmpInGetRequests - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 507
definition of 2-21 ICMP group 2- HP OpenView) 2-17 trap information, interpretation of (MG-SOFT MIB browser) 2-19 trap PDU, format of 2-4 traps a new connection has been established on a port 2-17 bit error 16 overview, EOS 2-3 PDU format 2-3 Port binding violation 2-13 primitive sequence timeout 2-16 - HP StorageWorks 64 | FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manua - Page 508
Index introduction to 1-3 violation 2-13 i-8 E/OS SNMP Support Manual
E/OS SNMP Support Manual
P/N 620-000131-620
REV A