HP StorageWorks 6400/8400 HP StorageWorks MPX200 Multifunction Router User Gui
HP StorageWorks 6400/8400 - Enterprise Virtual Array Manual
 |
View all HP StorageWorks 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 6400/8400 manual content summary:
- HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 1
HP StorageWorks MPX200 Multifunction Router User Guide This user guide describes the MPX200 Multifunction Router, which supports the EVA family of Fibre Channel storage systems for integrated iSCSI connectivity, FCIP, and data migration. The MPX200 hardware is integrated with up to four EVA storage - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 2
Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice. The only warranties for HP products and services are - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 3
Contents 1 MPX200 Multifunction Router overview 21 MPX200 features ...21 MPX200 configuration options 23 Planning the MPX200 installation 27 Total number of initiators ...28 Number of paths required per initiator 28 Use of iSNS ...28 Use of iSCSI ports ...28 Balancing the load ...28 10-GbE - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 4
Setting up SNP for the HP NC3xxx Multifunction Gigabit server adapter 65 iSCSI with the Solaris 10 iSCSI initiator 82 the Microsoft iSCSI initiator services and MPIO 93 Configuring HP MPIO Full Featured DSM for EVA 97 Microsoft Windows Cluster support for the MPX200-discovered iSCSI initiator - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 5
MPX200 routers and full inter-site connectivity 124 Configuration rules and guidelines 125 General configuration rules 125 Operating system and multipath support 126 EVA storage system rules and guidelines 126 Fibre Channel switch and firmware support Logs ...143 MPX200 Multifunction Router 5 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 6
Migration Services 148 Download the application 148 HP StorageWorks mpx Manager for Data Migration Services for Windows 149 HP StorageWorks mpx Manager for Data Migration Services for Linux 149 HP StorageWorks mpx Manager for Data Migration Services for Mac OS X 149 Hardware and software setup - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 7
based license to a specific array in the CLI 186 Viewing data migration license usage 187 Viewing data migration license usage in the GUI 187 Viewing data migration license usage in the CLI 187 Command Line Interface ...188 User accounts ...188 User targets ...235 MPX200 Multifunction Router 7 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 8
256 Communication between HP Command View EVA and MPX200 is down 256 HP Command View EVA issues and solutions 256 8 Support and other resources 259 Intended audience ...259 Related documentation ...259 Contacting HP ...260 HP technical support ...260 Subscription service ...260 Product feedback - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 9
291 Show iSCSI ...292 Show iSNS ...293 Show logs ...293 Show LUNinfo ...294 Show LUNs ...294 Show LUNmask ...295 Show memory ...295 Show mgmt ...296 MPX200 Multifunction Router 9 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 10
Command Line Interface usage 307 Logging on to an MPX200 ...307 Understanding the guest account 308 Working with MPX200 router configurations 309 Modifying a configuration 309 Saving and restoring router configurations 309 Restoring router configuration and persistent data 310 C Simple Network - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 11
4. List and create LUN ID mappings 372 Step 5. List and create Fibre Channel zoning 373 Performance and downtime ...373 Optimizing performance during data migration 373 MPX200 Multifunction Router 11 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 12
to the physical device 377 Step 4. List and create LUN ID mappings 378 Step 5. List and create Fibre Channel zoning 378 Assigning LUNs to the MPX200 for data migration 379 Assigning LUNs from an MSA2012fc array 379 Assigning LUNs from an MSA1000/1500 array 382 Assigning LUNs from an HDS array - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 13
configuration 26 6 MPX200 single-blade direct connect to one EVA configuration 26 7 MPX200 dual-blade direct connect to two EVA configuration 26 8 MPX200 components 31 9 Chassis rails ...32 10 Rack rails ...32 31 Adding a host ...58 32 Virtual disk properties 59 MPX200 Multifunction Router 13 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 14
page before reboot 63 37 MPIO Properties page after reboot 63 38 Software update installation wizard 64 39 Discover targets ...66 40 Add static IP 63 HP MPIO DSM Manager with iSCSI devices 98 64 iSCSI Persistent Reservation Setup 99 65 MPX200 basic FCIP configuration 113 66 MPX200 high - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 15
Migration Job: batch 162 96 Serial Data Migration Jobs Options 163 97 DMS iSCSI host entry in HP Command View EVA 165 98 Virtual disk creation 166 99 DMS virtual disk presentation 167 100 Active Data Verify migration job wizard 179 105 Verifying jobs options 180 MPX200 Multifunction Router 15 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 16
port IP address conflict blink pattern 251 116 Over-temperature blink pattern 251 117 Using the beacon on command to locate an MPX200 blade 251 118 Using HP Command View EVA to locate a hardware device 252 119 FCIP route ping command 253 120 iSCSI controller properties 253 121 iSCSI controller - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 17
143 Adding a second host port 395 144 Presenting Vdisks 396 145 Viewing enterprise storage 397 146 Registering Initiator Record 398 147 Creating storage group 399 148 Adding DM-Host to storage group 400 149 Adding LUNs to DM-Host 401 MPX200 Multifunction Router 17 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 18
28 4 Supported MPX200 maximums 50 5 Support for EVA storage system software with MPX200 iSCSI 52 6 Operating system and multipath software support 52 7 Supported IP network adapters 55 8 Differences between Windows Server 2008 and Windows Server 2003 61 9 MPIO options for the MPX200 61 10 CHAP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 19
33 SNMP trap configuration parameters 312 34 MPX200 log messages 331 35 DM log messages 349 36 FCIP log messages 352 37 Storage array 48 Example B: Pre-migration Fibre Channel zoning information 379 49 Example: Post-migration Fibre Channel zoning information 379 MPX200 Multifunction Router 19 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 20
20 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 21
1GbE Base Chassis • one chassis • one 1-GbE blade with four 1-GbE iSCSI ports and two 8-Gb/s FC ports • rail kit • accessory kit • documentation • redundant power supplies Up to four EVA storage systems, or order separately to upgrade existing EVA storage systems MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 22
AP774A TA766A TA767A TA762A TA763A TA764A TA765A HP StorageWorks MPX200 1GbE Upgrade Blade HP StorageWorks MPX200 10-1GbE Base Chassis • one 1-GbE blade with four 1-GbE iSCSI ports and two 8-Gb/s FC ports • accessory kit • documentation The AP771A or AP773A MPX200 base chassis and up to four EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 23
+ 3m Direct Attach Cable XBR-TWX-0301 (AP819A) • Brocade 10-GbE SFP+ 5m Direct Attach Cable XBR-TWX-0501 (AP820A) See Chapter 4 and the SPOCK website at http://www.hp.com/storage/spock for FC switch model support. MPX200 configuration options You can configure an EVA storage system for simultaneous - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 24
dual-blade configuration may require reconfiguration of device mappings. Figure 2 MPX200 dual-blade fabric-attached configuration . Figure 3 illustrates a multi-EVA configuration with connectivity for up to four EVA storage systems from a single MPX200 blade. 24 MPX200 Multifunction Router overview - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 25
for up to four EVA storage systems from dual MPX200 blades. This configuration provides high availability with failover between blades. Figure 4 MPX200 dual-blade multi-EVA configuration . Figure 5, Figure 6, and Figure 7 illustrate EVA direct connect configurations. MPX200 Multifunction Router 25 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 26
single-blade direct connect to one EVA configuration . MGMT MPX200 HP StorageWorks MPX200 GE4 GE3 blade 1 GbE Blade MPX200 Multifunction Router 1 MGMT MPX200 HP StorageWorks MPX200 GE4 GE3 blade 1 GbE Blade MPX200 Multifunction Router 2 MGMT IOIOI FC1 FC1 FC2 FC2 GE1 GE2 GE1 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 27
Service (iSNS) • Use of iSCSI ports • Load balancing • 10-GbE initiators Table 3 describes the MPX200 supported configuration maximums for ports, blades, and chassis. Table 2 MPX200 (data migration services) configurations are always configured for separate operation. MPX200 Multifunction Router 27 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 28
and one 10-GbE blade, the supported maximums are 10-GbE blades. If multiple 1-GbE initiators are required, ensure that logins are spread across all 1-GbE ports. For 10-GbE blades, you can place a higher number of initiators on the 10-GbE ports than on the 1-GbE ports. 28 MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 29
and path I/O follows. 10-GbE initiators HP recommends that you map servers with 10-GbE NICs for login to the 10-GbE ports on the MPX200. CHAP security You can configure the Challenge Handshake Authentication Protocol (CHAP) on the MPX200. CHAP is a security protocol that supports the bi-directional - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 30
30 MPX200 Multifunction Router overview - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 31
in. (8) Figure 8 MPX200 components . 5. Screw, flathead, 10-32 x 1/4 in. (6) 6. Screw, panhead, 10-32 x 3/8 in. (10) 7. Washer, centering (10); for use on racks with square holes only NOTE: You will need a crosshead screwdriver to perform the rack mount procedure. MPX200 Multifunction Router 31 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 32
1. Attach the two chassis rails to the MPX200 chassis using three 10-32 x 1/4 in. screws for each rail. Make sure that the end with the flange is facing the rear of the chassis (Figure 9). The MPX200 has multiple mounting holes to allow for adjustable setback. Secure the chassis rails in the desired - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 33
is toward the front of the rack. c. Fasten the rail flanges to the rack on both ends using two 10-32 x 3/8 in. screws in the upper and lower holes (Figure 11). 1. Screw, flathead, 6-32 x 1/4 in. 3. Washer 2. Screw, panhead, 10-32 x 3/8 in. Figure 11 Inner rack view . MPX200 Multifunction Router 33 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 34
: a. Starting from the back of the rack, slide the MPX200 chassis and rail assembly into the rack rails. b. Fasten the chassis to the rack using two 10-32 x 3/8 in. screws in the middle hole on each rail flange (Figure 12). 1. Screws, panhead, 10-32 x 3/8 in. Figure 12 Rear view . 34 Installing the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 35
Route the power cord: a. Starting from the front of the rack, connect the power cord to the MPX200. b. For the left blade, the cord by following the gap between the chassis and the chassis the positioning of the socket on the PCM. 1. Power cord Figure 13 Power cord . MPX200 Multifunction Router 35 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 36
6. Install the HP StorageWorks MPX200 bezel: a. Remove the four 10-32 x 3/8 in. screws that secure the rack rails to the front of the rack. b. Position the bezel support plate in front of the MPX200 chassis, with the arrows pointing up. c. Replace the four 10-32 x 3/8 in. screws, two on each side of - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 37
. Fibre Channel zoning Because the MPX200 is a fabric-connected device only, it is important to understand the zoning requirements. Open zoning When using an open zone configuration, each FC port on each MPX200 must be connected to a separate fabric, as shown in . MPX200 Multifunction Router 37 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 38
Figure 15 Open zone configuration . Fibre Channel switch-based zoning Each FC port on the MPX200 uses N_Port ID Virtualization (NPIV) to create a path to the FC port on the router blade and gives you more control of load balancing through the router. 38 Managing the MPX200 using HP Command View EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 39
is set and the router FC ports are visible to the EVA, you can perform the MPX200 discovery. You discover the MPX200 iSCSI controllers using the Discover iSCSI Devices button or the Add iSCSI Device button (see Figure 17). Figure 17 iSCSI devices folder properties . MPX200 Multifunction Router 39 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 40
NOTE: HP recommends that you set a static IP address on the management port to ensure connectivity. After the discovery is complete, the MPX200s appear in the iSCSI Devices folder as iSCSI Controller 01 and iSCSI Controller 02. The four iSCSI MPX200 hosts appear in the Hosts folder (see Figure 18). - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 41
the IP Ports tab on the iSCSI Controller Properties page (see Figure 20). NOTE: A target portal is created for each IP address that you set. MPX200 Multifunction Router 41 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 42
tab . Setting the date and time on the MPX200 Setting the date and time on the MPX200 ensures the synchronization of events and assists in troubleshooting. You have three options for setting the date and time, as shown in Figure 21. NOTE: HP recommends using the Network Time Protocol (NTP) settings - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 43
iSCSI controller. 2. Click the Code Load button. 3. Browse to the firmware file. 4. Click the Next Step button. 5. Click the Finish button. 6. In the dialog box, enter yes, and then click the Update button. The MPX200 reboots upon successful load of the firmware. MPX200 Multifunction Router 43 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 44
Figure 23). Figure 23 iSCSI controller shutdown options . Saving or restoring the MPX200 configuration After initial setup of the MPX200, it is a good practice to save the configuration. The FRU Save function important for single-blade configurations. 44 Managing the MPX200 using HP Command View EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 45
button. 4. Select the configuration method (see Figure 24). Figure 24 iSCSI controller configuration selection . Locating the MPX200 A flashing blue LED in the center of the blade indicates that the locating beacon is on. NOTE: The beacon turns off after 15 minutes. MPX200 Multifunction Router 45 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 46
controller. 2. Click the Set Options button. 3. Click the Remove controller button (See Figure 27). 4. Click the Remove button on the dialog box. 46 Managing the MPX200 using HP Command View EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 47
Figure 27 iSCSI controller options: Remove controller . MPX200 Multifunction Router 47 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 48
48 Managing the MPX200 using HP Command View EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 49
describes the iSCSI configuration rules and guidelines for the MPX200. iSCSI rules and supported maximums The MPX200 chassis can be configured with one or two blades to a failed blade will no longer have connectivity to the MPX200. Table 4 lists the supported maximums. MPX200 Multifunction Router 49 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 50
management functions are integrated in HP Command View EVA. IMPORTANT: The MPX200 requires a specific controlled release of HP Command View EVA. For more information and to receive the supported HP Command View EVA version, contact your HP service representative. The HP Command View EVA management - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 51
performed manually • Accessing the host's view of storage (for example, viewing an F drive from a host) • Deploying host agents to allow users to launch a script on the iSCSI host Table 5 describes support for EVA storage system software when using the MPX200 for iSCSI. MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 52
EVA storage system software with MPX200 iSCSI HP StorageWorks product MPX200 iSCSI support HP StorageWorks Business Copy HP StorageWorks Replication Solutions Manager iSCSI and Fibre Channel hosts are supported. SSSU HP StorageWorks Continuous Access EVA HP StorageWorks Continuous Access EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 53
automatically by the HP StorageWorks MPX200 for Enterprise Virtual Array Windows software kit, which is available at http://h18006.www1.h p.com/products/storageworks/evaiscsiconnect/index.html . CAUTION: Using the Registry Editor incorrectly can cause serious problems that may require reinstallation - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 54
access to the same LUN via VMFS • VMware ESX server 4.0/3.5 native multipath solution based on NIC teaming iSCSI initiator operating system considerations follow: • Host-mode setting-VMware • Hardware iSCSI initiator (iSCSI HBA)-Not supported 54 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 55
adapters supported by the MPX200. Table 7 Supported IP network adapters Operating system Network interconnect Apple Mac OS X All standard GbE NICs/ASICs supported by Apple Microsoft Windows Server 2008, 2003, Hyper-V All standard 1 Gbe or 10 GbE NICs/ASICs and TOE NICs supported by HP for - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 56
HP StorageWorks MPX200 iSCSI kit. a. Start the installer by running Launch.exe. (If you are using a CD-ROM, the installer should start automatically.) b. Click Install iSCSI software Multipathing Support for iSCSI check box). For Windows Server 2008, MPIO is installed separately. 56 MPX200 iSCSI - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 57
properties: Discovery tab . e. In the Target Portals section, click Add. A dialog box opens. f. Enter the iSCSI port IP address. g. Click OK. The discovery is complete. MPX200 Multifunction Router 57 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 58
2. In HP Command View EVA, set up the iSCSI host and virtual disks. a. Click the EVA storage system icon to start the iSCSI storage presentation. In Figure 31, MPX200-XL is the target EVA storage system. Figure 31 Adding a host . b. Select the Hosts folder. c. Click Add host to create an iSCSI - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 59
Figure 32 Virtual disk properties . Figure 33 Host details . MPX200 Multifunction Router 59 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 60
Multipathing check box to enable MPIO. The target status is Connected when logged in. NOTE: HP recommends using the Advanced button to choose the Local Adapter, Source IP, and Target Portal. or Computer Management. f. Select Disk Management. 60 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 61
iSCSI Software Initiator supported MPIO options for the MPX200. Table 9 MPIO options for the MPX200 Multipath support Windows Server 2008 HP MPIO Full Featured DSM for EVA (preferred) Supported Microsoft generic DSM Supported Windows Server 2003 Supported Supported MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 62
: Microsoft Windows 2008 includes an MPIO feature that must be installed separately. It also includes the iSCSI initiator, which does not require download or installation. To install the MPIO feature for Windows Server 2008: 1. Select the Multipath I/O check box on the Select Features page (Figure - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 63
). NOTE: You must present a virtual disk to the initiator to enable the Add support for iSCSI devices check box (see Figure 36). Figure 36 MPIO MPIO Properties page before reboot . Figure 37 MPIO Properties page after reboot . 4. Reboot the system to MPIO the devices. MPX200 Multifunction Router 63 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 64
(Figure 38). Figure 38 Software update installation wizard . To HP NC3xxx Multifunction Gigabit server adapters use SNP to support TCP off-load functionality. For support details, see the latest HP adapter information at http://h18004.www1.hp.com/products/ servers/networking/index.html. 64 MPX200 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 65
Mac OS X (single-path) The EVA4400 and EVA connectivity option supports ATTO Technology's Xtend SAN iSCSI Initiator for Mac OS X . For details, see http://www.attotech.com. Setting up the iSCSI initiator for Apple Mac OS X 1. Install the Xtend SAN iSCSI Initiator 3.10. MPX200 Multifunction Router 65 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 66
then click Finish (Figure 40). Figure 40 Add static IP address . c. Select a target from the Discovered Targets list and then click Add (Figure 41). 66 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 67
. d. For ISNS discovery Select Initiator and then enter the iSNS name or IP address in the box (Figure 42). Figure 42 iSNS discovery and verification . MPX200 Multifunction Router 67 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 68
status (Figure 44). i. Select the Auto Login check box to configure the initiator to automatically log in to the iSCSI target at system startup. 68 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 69
j. Click Save. Figure 44 Selecting the newly added target . k. Click Status, select the network node, and then click Login to connect to the MPX target (Figure 45). The target status is Connected and the target status light turns green. Figure 45 Select status . MPX200 Multifunction Router 69 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 70
HP Command View EVA, present the LUNs. 2. Verify that the EVA LUNs are presented to the Xtend SAN iSCSI Initiator: a. Open the Xtend SAN iSCSI application. b. Select the MPX200 configuring the SUSE Linux Enterprise 10 iSCSI driver Configure the initiator using the built-in GUI-based tool or the open- - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 71
under Network Services), and then set the initiator to start at boot time (Figure 47). Figure 47 Configure the iSCSI initiator and targets . 3. Select the Discovered Targets tab and enter the iSCSI target IP address (Figure 48). Figure 48 Discovered Targets tab . MPX200 Multifunction Router 71 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 72
4. Log in to the target (Figure 49). Figure 49 Log in to the target . 72 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 73
the iSCSI driver for Red Hat 5: 1. Use the iscsiadm command to control discovery and connectivity: # iscsiadm -m discovery -t st -p 10.6.0.33:3260 2. Edit the initiator name: # vi /etc/iscsi/initiatorname.iscsi 3. Start the iSCSI service: # service iscsi start MPX200 Multifunction Router 73 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 74
service command: man iscsi.conf 2. Manually start iSCSI services to test your configuration: /etc text following the colon. If there is a problem starting the iscsi daemon, it is usually due from a previous version of an iSCSI driver, HP recommends that you remove the /etc/.iscsi - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 75
NOTE: The Linux driver supports both Red Hat 3 and SUSE 8. See the Readme file in the tar ball for information on how to configure the Linux in /dev to determine which nodes map to iSCSI devices. Therefore, several modprobe messages may be logged to syslog indicating MPX200 Multifunction Router 75 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 76
unable to log in immediately due to network or authentication problems, the iscsi-mountall script may time out and fail to changes or network delays). Instead of directly mounting SCSI devices, HP recommends that you do one of the following: • Mount the MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 77
is built into the ESX server's VMkernel and uses standard 10GigE/GigE NICs to connect to the MPX200. To set up software-based iSCSI storage connectivity: 1. Install the appropriate license from VMware to enable iSCSI software driver using the VMware instructions. MPX200 Multifunction Router 77 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 78
stack for iSCSI support. Configure the VMkernel service console with dedicated virtual switch with a dedicated NIC for iSCSI data traffic. Follow the instructions from VMware. Figure 51 on page 78 shows an example of a configuration. Figure 51 Configuration tab . 78 MPX200 iSCSI configuration rules - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 79
3. Open a firewall port by enabling the iSCSI software client service: a. Using the VMware VI client, select the server. b. Click 52 on page 79. d. Select the check box for Software iSCSI to enable iSCSI traffic. e. Click OK. Figure 52 Firewall Properties dialog box . MPX200 Multifunction Router 79 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 80
link of the software adapter. The iSCSI Initiator Properties dialog box is displayed. e. Click Configure. The General Properties dialog box is displayed. See Figure 53 on page 80. f. Select the Enabled check box. g. Click OK. Figure 53 General Properties dialog box . 80 MPX200 iSCSI configuration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 81
a new iSCSI target. The Add Send Target Server dialog box is displayed. See Figure 54 on page 81. d. Enter the iSCSI IP address of the MPX200. e. Click OK. Figure 54 Add Send Target Server dialog box . MPX200 Multifunction Router 81 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 82
a Virtual Machine either as a data store created on an iSCSI device, or raw device mapping. Configuring multipath with the Solaris 10 iSCSI initiator This section explains how to configure multipath with the Solaris 10 iSCSI initiator to the MPX200. 82 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 83
an HP EVA storage array This section explains how to configure a Solaris server to recognize an HP storage array in an iSCSI multipath environment with the MPX200. Editing the scsi_vhci.conf file HP storage arrays are supported with MPxIO: • As symmetric devices only MPX200 Multifunction Router 83 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 84
• With no load balancing • With no failback To configure MPxIO for HP storage arrays, you must add information to the /kernel/drv/ scsi_vhci.conf file. 1. Use to none: load-balance="none"; 3. Change auto-failback to disable: auto-failback="disable"; 84 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 85
given device (which supports multipath I/O) to occur HP storage arrays are recognized by Solaris as SCSI controllers, you must add information to the /kernel/drv/sgen.conf file. 1. Use a text editor to modify the configuration file. For example: # vi /kernel/drv/sgen.conf MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 86
"; 3. Uncomment all target/LUN pair entries. Example: HP storage array settings in /kernel/drv/sgen.conf . class="scsi" target=9 lun=0; name="sgen" class="scsi" target=10 lun=0; name="sgen" class="scsi" target=11 lun=0; name driver alias The HP storage array is a self-identifying SCSI device and must - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 87
bfcp" sgen "scsa,08.bvhci" sgen "scsiclass,0c" Enable iSCSI target discovery Solaris supports three iSCSI target discovery methods: • SendTargets • Static • iSNS This section describes SendTargets 4. Verify the discovery address entries: #iscsiadm list discovery-address MPX200 Multifunction Router 87 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 88
list target Example: #iscsiadm list target Target: iqn.1986-03.com.hp:fcgw.mpx200.0834e00028.b2.01.50014380025c4179 Alias: TPGT: 0 ISID: 4000002a0000 Connections: 1 Target: iqn.1986-03.com.hp:fcgw.mpx200.0834e00028.b1.01.50014380025c417d Alias: TPGT: 0 ISID: 4000002a0000 Connections: 1 NOTE: The - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 89
Length: 8192/65536 Max Connections: 1/Header Digest: NONE/Data Digest: NONE/Configured Sessions: 1 Monitoring the multipath devices After HP Command View EVA has presented the virtual disks to the Solaris host, enter the following commands to monitor the configuration: MPX200 Multifunction Router 89 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 90
the same controller. Example: iscsiadm list target -S Target: iqn.1986-03.com.hp:fcgw.mpx200.0834e00028.b2.01.50014380025c4179 Alias: TPGT: 0 ISID: 4000002a0000 Connections: 1 LUN: 120 Vendor: HP Product: HSV300 OS Device Name: /dev/rdsk/c5t600508B4000B15A200005000038E0000d0s2 Target: iqn.1986-03 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 91
hp:fcgw.mpx200.0834e00028. b1.01.50014380025c417d Relative ID: 0 Managing and troubleshooting Solaris iSCSI multipath devices For details on managing and troubleshooting Solaris iSCSI multipath devices, see the Solaris System Administration Guide Select the Target tab. MPX200 Multifunction Router 91 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 92
lowest weight. If the path with the lowest weight fails, the path with the next lowest weight is used. • Least Queue Depth. This is not supported by MPIO. 92 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 93
the QLogic iSCSI initiator through SMS. The QLogic iSCSI HBA will not appear in the Microsoft Network Connection device list. Installing the Microsoft iSCSI initiator services and MPIO To install the Microsoft iSCSI initiator: MPX200 Multifunction Router 93 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 94
Figure 57) Figure 57 Microsoft iSCSI Initiator Installation page . IMPORTANT: Do not select the Software Initiator check box. The QLogic initiator resides on the iSCSI HBA. 2. Reboot the system. > Programs, and connect to the local host (Figure 58). 94 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 95
the SLP Target Discovery settings (optional). • Configure the iSNS Target Discovery settings (optional). Figure 58 Connect to Host window . Figure 59 Start general configuration wizard . MPX200 Multifunction Router 95 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 96
sign (Figure 60). 2. Enter the first iSCSI target port IP address. Figure 60 HBA Port Target Configuration window . 3. Repeat steps 1 and 2 for each MPX200 you want to add. 4. Click Next. 5. To activate the changes, enter the SMS password: config. 6. Select the Target Settings tab. Verify that the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 97
/TechSupport/DocumentIndex.jsp?contentType=SupportManual& lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=421492. After installing the HP MPIO Full Featured DSM for EVA, open Computer Management to view and control the iSCSI LUNs (Figure 63). MPX200 Multifunction Router 97 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 98
clustering is supported on the HP StorageWorks MPX200 Multifunction Router. For more information, see http://www.microsoft.com/windowsserver2003/technologies/storage/iscsi/ iscsicluster.mspx. Requirements • Operating system: Windows Server 2003 Enterprise, SP2, R2, x86/x64 • Firmware: Minimum - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 99
& lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=421492 Microsoft Cluster Server for Windows 2008 iSCSI Failover clustering is supported on the HP StorageWorks MPX200 Multifunction Router. For more information, see http://technet.microsoft.com/en-us/library/cc754482.aspx - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 100
Firmware: Minimum version-3.1.0.0, released November 2009 • Initiator: • Multiple NIC/iSCSI HBA ports-four recommended • one public • one private • two storage, for higher availability and performance • MPIO - use HP The CHAP restrictions follow: 100 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 101
an initiator to find the targets to which it has access. • Normal-A normal session is unrestricted. CHAP is enforced on both discovery and normal sessions. MPX200 CHAP modes The MPX200 supports two CHAP modes: MPX200 Multifunction Router 101 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 102
user-provided CHAP secret. To enable single-direction CHAP, you must enable CHAP for a specific initiator record on the MPX200 10 CHAP single-direction settings MPX200 one of the follow- ing: 1. From HP Command View EVA, select Hosts, and manually: 102 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 103
enable CHAP for the MPX200-discovered iSCSI initiator entry: • If the iSCSI initiator is not listed when you execute the set chap command, do one of the follow- ing: 1. From HP Command View EVA, select iSCSI initiator To enable CHAP for the Microsoft iSCSI initiator: MPX200 Multifunction Router 103 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 104
manually discover iSCSI target portals: a. Click Add under Target Portals. b. Enter the IP address of the iSCSI port of the MPX200. c. Click Advanced. d. Select the CHAP Login Information checkbox. e. Enter the CHAP secret for the MPX200 authmethod=CHAP b. Set up the user name and password for the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 105
.10.1.23 4. Use the iscsiadm command to log in to the iSCSI target. For example: [root@sanergy33 iscsi]# iscsiadm --mode node --targetname iqn.1986-03.com.hp:fcgw.mpx200.0840e00002. .auth.username_in = username_in #discovery.sendtargets.auth.password_in = password_in MPX200 Multifunction Router 105 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 106
listed under the set chap command, do one of the following: • From HP Command View EVA, select Hosts, and then select the Add Host tab. Enter selecting 0, and then entering the CHAP secret. 2. Enable CHAP for the MPX200 iSCSI presented target: a. Enter the set CHAP command. b. Select the Presented - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 107
To discover iSCSI target portals manually: a. Click Add under Target Portals. b. Enter the IP address of the iSCSI port of the MPX200. c. Click Advanced. MPX200 secret settings Source Setting (example) Microsoft initiator secret settings Action Setting (example) MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 108
of the iSCSI initiator. • To Enable CHAP, select 0, and then enter the CHAP secret. 2. Enable CHAP for the MPX200 iSCSI port: a. To enable CHAP for the MPX200 iSCSI port using HP Command View: • Select the appropriate iSCSI Controller, then select the IP Ports tab, and then select the appropriate IP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 109
Information check box. l. Enter the CHAP secret for the MPX200 discovered iSCSI initiator in the Target Secret box (for example, CHAPsecret01). m. Select the Mutual Authentication check box. n. Click OK. o. Click OK again and the initiator completes normal login. MPX200 Multifunction Router 109 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 110
index of the iSCSI initiator. b. To Enable CHAP, select 0, then enter the CHAP secret. 2. Enable CHAP for the MPX200 iSCSI port: a. To enable CHAP for the MPX200 iSCSI port using HP Command View: • Select the appropriate iSCSI Controller, then select the IP Ports tab, and then select the appropriate - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 111
Information check box. l. Enter the CHAP secret for the MPX200 discovered iSCSI initiator in the Target Secret box (for example: CHAPsecret01). m. Select the Mutual Authentication check box. n. Click OK. o. Click OK again and the initiator completes normal login. MPX200 Multifunction Router 111 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 112
112 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 113
can be either a single HP StorageWorks MPX200 Multifunction Router 1-GbE Base Chassis (MPX200), Part Number AP771A or an HP StorageWorks MPX200 Multifunction Router 10-1 GbE Base Chassis (MPX200), Part Number AP773A. Note that FCIP is currently supported only on MPX200 1 GbE ports per site - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 114
HP StorageWorks MPX200 Multifunction Router 1-GbE Base Chassis with a HP StorageWorks MPX200 Router 1-GbE Upgrade Blade, or an HP StorageWorks MPX200 Multifunction Router 10-1 GbE Base Chassis with a HP StorageWorks MPX200 Router 10-1 GbE Upgrade Blade. Note that FCIP is currently supported guide - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 115
with a single FC fabric (see Figure 67) connected to an MPX200 blade and one with dual FC fabrics (see Figure 68) connected to an MPX200 blade. In the single FC fabric case (Figure 67), the impact FCIP impact on existing iSCSI configurations - single fabric per blade . MPX200 Multifunction Router 115 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 116
same blade would limit FC access to only 8 Gb/s and would not meet the performance requirements for that situation. MPX200 iSCSI/FCIP configurations The MPX200 router supports the following configurations: • Figure 69 MPX200 basic FCIP configuration with one or two long-distance links • Figure 70 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 117
GE2 EX MPX200 E HP StoragMePWXo2r0k0s MGMT IOIOI GE4 GE3 FC1 MPX200 Multifun1cGtiobnERBoluatdeer FC2 GE1 GE2 MPX200 E Fabric B2 Remote FC servers Local storage system Figure 70 MPX200 FCIP with B-series Integrated Routing . Remote storage system 26625a MPX200 Multifunction Router 117 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 118
Figure 71 MPX200 high-availability configuration with one or two long-distance links . Figure 72 MPX200 high-availability configuration with fully-redundant long-distance links . Figure 73 MPX200 configuration with remote IP Distance gateway (mpx110) . 118 MPX200 FCIP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 119
Figure 74 MPX200 highly-redundant configuration with one or two long-distance lists . Figure 75 MPX200 highly redundant pairs of gateways with fully-redundant long-distance links . MPX200 Multifunction Router 119 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 120
Figure 76 MPX200 simultaneous iSCSI and FCIP with remote dedicated FCIP blade . Figure 77 MPX200 simultaneous iSCSI and FCIP, both local and remote . 120 MPX200 FCIP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 121
HP Continuous Access EVA 3-site configurations: • HP Continuous Access EVA 3-site configuration with four MPX200 routers • HP Continuous Access EVA 3-site configuration with six MPX200 routers • HP 2 and Site 3 is not supported. The following configuration rules apply MPX200 Multifunction Router 121 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 122
in Figure 79 provides long-distance link redundancy between all three sites. Figure 79 HP Continuous Access EVA 3-site configuration with four MPX200 routers . 3-site configuration with six MPX200 routers The configuration shown in Figure 80 provides the same long-distance link redundancy as the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 123
HP Continuous Access EVA 3-site configuration with six MPX200 routers . 3-site configuration with eight MPX200 routers The configuration shown in Figure 81 provides the highest 3-site redundancy, with a dedicated MPX200 pair for all long-distance links to all three sites. MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 124
Figure 81 HP Continuous Access EVA 3-site configuration with eight MPX200 routers . 3-site configuration with six MPX200 routers and full inter-site connectivity Figure 82 provides long-distance link redundancy and full connectivity between all three sites. 124 MPX200 FCIP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 125
and one remote, connected through an IP network. HP does not support FCIP connectivity between other gateway models. • FCIP is supported on GbE ports only (GE1, GE2). • The MPX200 Multifunction Router is supported for FCIP extension with HP Continuous Access EVA (see EVA storage system rules and - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 126
system and multipath support The MPX200 Multifunction Router is supported using FCIP with all operating systems and multipath software supported by HP for Continuous Access EVA. For more information, see the HP StorageWorks SAN design reference guide, available at http://www.hp.com/go/SDGManuals - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 127
MPX200 Multifunction Router pairs must be connected to the same Fibre Channel switch product line series. NOTE: The MPX200 Fibre Channel ports operate at 2, 4, and 8 Gb/s. IP network requirements HP requires that the following standards be met for the IP network: • Supported not exceed 10 ms over - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 128
MPX200 supports Fibre Channel service at transmission rates of 1 Gb/s or 2 Gb/s with a maximum frame size of 2,148 bytes. It supports Ethernet service physical distance between the MPX200 Multifunction Routers. This is usually in a configuration. HP StorageWorks Continuous Access EVA replication - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 129
frames are not supported for use with HP Continuous Access EVA Continuous Access. Compression The MPX200 integrates a software compression option. Enable KB. Modify the window size and scaling factor in the MPX200 Multifunction Router pairs based on the WAN RTT and link speed. To determine the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 130
recommendations listed in Table 17 through Table 23 are based on low-loss networks (0.0012% average packet-loss time (RTT) in ms Window size (bytes) 250 64K 100 32K 50 32K 25 32K 20 32K 15 32K 10 32K 5 32K 2.5 32K 1 or less 32K Scaling factor (2n) 1 0 0 0 0 0 0 0 MPX200 FCIP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 131
16M 100 4M 50 2M 25 1M 20 1M 15 1M 10 512K 5 256K 2.5 128K Scaling factor (2n) 9 7 6 5 5 5 4 3 2 Yes Yes Yes Yes Yes Compression recommendation Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Compression recommendation Yes Yes Yes Yes Yes Yes Yes Yes Yes MPX200 Multifunction Router 131 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 132
(Bandwidth = 384 Mb) Round trip time (RTT) in ms Window size (bytes) 250 4M 100 2M 50 1M 25 512K 20 512K 15 256K 10 256K 5 128K 2.5 64K 1 or less 32K Scaling factor (2n) 7 6 5 4 4 3 3 2 1 0 Table 22 OC-12 621 No No No No No Compression recommendation Yes Yes 132 MPX200 FCIP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 133
redundancy) • Or HP StorageWorks MPX200 Multifunction Router 10-1 GbE Upgrade Blade. Note that FCIP is currently supported only on MPX200 1 GbE ports. • HP Storage Works MPX200 Full Chassis FCIP License NOTE: For the latest information about operating system and multipath software support, see SPOCK - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 134
, Round-Trip-Time, Quality Of Service, VLAN/Priority Step 3. Rack-mount the MPX200 See the "Rack mounting the MPX200 " on page 31. Step MPX200 for the first time, your workstation IP address must be "10.0.0.x," where x is a number other than 1 and the subnet mask is 255.0.0.0. 1. Connect the MPX200 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 135
. Figure 83 shows the location of the ports and LEDs on the MPX200. Input fault LED System power LED Heartbeat LED HP StorageWorks MPX200 1 GbE iSCSI ports GE4 GE3 1 GbE Blade MPX200 Multifunction Router MGMT IOIOI Management port 10/100/1000 Ethernet RS-232 port FC1 FC2 UID beacon LED - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 136
. The management port is now configured with the appropriate IP address and network parameters. IMPORTANT: If you are using Telnet to configure the MPX200, the Telnet session is terminated. To restart the Telnet session, use the IP address you just assigned to the management port. Step 6. Configure - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 137
TCP Windows scaling factor • Use the recommended setting documented in this guide for the actual bandwidth and RTT of the link • Software compression • Enable compression for IP links with round-trip time ( VSAN n (where n stands for all VSANs that use the FCIP link) MPX200 Multifunction Router 137 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 138
5e crossover network cable to directly connect two MPX200s through their respective GE ports without an IP switch. Step 9. Verify FCIP links and firmware version 1. To determine whether a firmware upgrade is necessary, visit the SPOCK website at http:// www.hp.com/storage/spock. You must sign up for - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 139
migration service in the HP StorageWorks MPX200 Multifunction Router data transport device. Features overview The HP StorageWorks mpx Manager for Data Migration Services software is designed to simplify data migration jobs for minimum downtime, while providing protection against common user errors - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 140
The mpx Manager for Data Migration Services multiple data migration job scheduling next 30 days) • Serial Schedule (priority-based scheduling) Immediate schedule Use the Immediate Schedule option flexibility for data migration. Even though DMS supports 256 simultaneous migration jobs, typical array - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 141
The MPX200 simultaneously supports both iSCSI connectivity and data migration service. Typically, you would use the None attribute when the MPX200 is used computed over all paths. The MPX200 uses only the user-assigned array bandwidth to migrate the data. This allows MPX200 Multifunction Router 141 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 142
performance level. • Load Balancing: The MPX200 detects all available multiple active and passive attributes properly to avoid errors. • A user acknowledgement is required for a data migration job types of arrays and LUNs may provide optimum performance based on the I/O size. The default size is 64K - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 143
job is completed and cleared from the MPX200. This provides a record of every data migration job and makes it easier to differentiate between them. • System logs: These primarily record events, errors, and configuration changes, and can be used for troubleshooting. MPX200 Multifunction Router 143 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 144
get started using DMS with the MPX200 and the mpx Manager for Data Migration Services by describing the supported configurations, some best practices recommendations, and hardware and software setup. Supported configurations This section describes the supported topologies and fabrics, and lists the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 145
Modular Storage (AMS) family Workgroup Modular Storage (WMS) family Hewlett-Packard (HP) HP StorageWorks Modular Storage Array (MSA) family HP StorageWorks Enterprise Virtual Array (EVA) family System Storage DS4000 family IBM System Storage DS5000 family MPX200 Multifunction Router 145 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 146
appendix focuses on the migration functionality available with the MPX200, it is important to note that a successful migration process has delivered the data to a sufficient quality level to support the target services. • Security Validation. Ensure that the migration process adheres to your - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 147
a single host or host group entity in the array management software. This configuration ensures that all MPX200 ports from the same virtual port group (VP group) see the no longer needed. • After the migration is complete, HP recommends that you remove the arrays. MPX200 Multifunction Router 147 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 148
mpx Manager for Data Migration Services is available at: http://www.hp.com/go/mpx200. To download the version of your operating system: 1. Click Support & Documents. 2. Click HP StorageWorks MPX200 Multifunction Router. 3. Click Download drivers and software. 4. Select your product. 5. Select your - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 149
application was downloaded. An Install.app file will unzip into the download folder. 3. Open install.app and follow the installation instructions. Hardware and software setup Follow the procedures and guidelines in this section to set up your hardware and software. MPX200 Multifunction Router 149 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 150
Instructions. To set up the hardware for DMS: 1. To manage the MPX200, the MPX200 must be accessible over the network connection from the machine on which the mpx Manager is installed. 2. Set up the MPX200 management port IP address. For details, see the HP StorageWorks MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 151
by the MPX200. 2. Click the storage array that you want to use as the source array. The Information page in the right pane displays all the properties currently set for the selected array. 3. (Optional) In the Symbolic Name box, enter the user-friendly array name. MPX200 Multifunction Router 151 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 152
4. From the Target Type list, select Source, as shown in Figure 89. Figure 89 Setting array properties: target type . 5. To save your changes, click Save. 6. In the Security Check dialog box, enter the administrative password. (The default password is migration.) The mpx Manager displays a message - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 153
Throttle, enter a value between 1 and 400 in the User Defined Bandwidth (MB/s) box. (Figure 90 shows an example.) By default, the MPX200 uses all available bandwidth. Figure 90 Setting array bandwidth . session. 1. Log in to the MPX200 as guest and enter the password. MPX200 Multifunction Router 153 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 154
based licensed applied. All attribute values for that have been changed will now be saved. Creating a Data migration job group The HP StorageWorks GUI: 1. In the left pane, select the Services tab to open the Services page. By default, the MPX200 shows Group 0 created under the Data Migration Jobs - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 155
migration user MPX200 by providing the IP address of the MPX200. 2. Start the Data Migration wizard using one of these methods: • From the Wizards menu, click Start Data Migration. • In the left pane, open the Services page and then right-click Data Migration Jobs. MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 156
" on page 161. Scheduling an individual data migration job in the GUI Follow these steps to schedule an individual data migration job in the HP StorageWorks mpx Manager. (To perform this operation in the CLI, see Scheduling an individual data migration job in the CLI.) 1. Start the Data Migration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 157
. If you attempt to drop a Source LUN from the right pane onto a Destination LUN of a smaller size in the left pane, an error message appears. MPX200 Multifunction Router 157 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 158
operation in the mpx Manager instead, see "Scheduling an individual data migration job in the CLI" on page 158.) 1. Log in to the MPX200 as guest and enter the password. 2. Open a miguser session using the following command (the default password for misguser is migration): miguser start -p migration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 159
migration performance based on the HP MSA2012fc-0 HP HSV200-1 DGC RAID-2 HP HSV210-3 Target Type -----------Src+Dest Src+Dest Src+Dest Src+Dest Please select a Source Target from the list above ('q' to quit): 2 Index (VpGroup Name) 1 VPGROUP_1 2 VPGROUP_2 MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 160
Please select a VPGroup for Destination Lun ('q' to quit): 1 LUN Vendor LUN Size( GB) Attributes 1 HP 10.00 2 HP 10.00 3 HP 20.00 4 HP 20.00 5 HP 10.00 6 HP 5.00 7 HP 5.00 8 HP 5.00 Please select a LUN as a Destination Lun('q' to quit): 1 I/O Size (0=32KB, 1=64KB, 2=128KB - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 161
of 255 jobs to run simultaneously at any specific time per source array. To optimize MPX200 performance, HP recommends that you run simultaneously no more than four jobs on any specified source or each of the arrays available for configuring the data migration job. MPX200 Multifunction Router 161 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 162
3. Choose the appropriate source and destination LUN for the migration job by dragging and dropping the LUNs from the right pane onto the Source LUN or Destination LUN under DataMigration Job (New) in the left pane. The mpx Manager populates the Source LUN and Destination LUN attributes and creates - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 163
Jobs, see "Starting serial scheduled jobs" on page 163. 2. In the Job Description box, enter a user-defined name to describe this data migration job. 3. In the Group Name box, select a job group , click Apply. 5. When prompted for a security password, enter migration. MPX200 Multifunction Router 163 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 164
EVA, the MPX200 firmware includes a new iSCSI initiator (iqn. 1986-03.com.hp:fcgw.mpx200.dm.initiator) specifically for data migration and can be used by HP Command View EVA. In a typical EVA iSCSI configuration, HP Command View allows the user to create an EVA iSCSI host entry based on the iSCSI - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 165
of creating and presenting LUNs for any iSCSI initiator connected to the EVA through the MPX200. 1. In HP Command View EVA, create a virtual disk: 1. Click the EVA storage system icon a Raid Redundancy. 8. (Optional) Select Advanced Settings. 9. Click Create Vdisk. MPX200 Multifunction Router 165 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 166
default. Presenting the LUN after the virtual disk is created will allow the user to select the VPGroup. Figure 98 shows the creation of a virtual disk with HP Command View EVA. Figure 98 Virtual disk creation . 2. In HP Command View EVA, present a virtual disk: 1. Click the EVA storage system icon - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 167
host. Figure 99 DMS virtual disk presentation . When the steps in this section are completed, the MPX200 is ready to start migrating data to and from this EVA storage array. Viewing the status of data jobs in the GUI: 1. In the left pane, select the Services tab. MPX200 Multifunction Router 167 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 168
2. In the right pane, select the Active Data Migration Jobs tab. The Active Data Migration Jobs page in the right pane shows a summarized view of all active jobs, as shown in Figure 100. Figure 100 Active Data Migration jobs . 3. To see a summarized view of all completed jobs, select the Completed - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 169
05:08:b4:00:05:4d:94:00:00:f0:00:35:a1:00:00 Source Lun Size 10.00 GB Destination Array HP MSA2012fc-0 Destination Lun VPG:ID 1:1 Destination Lun WWULN 60:0c:0f:f0:00:d5:9a:cb:4d and generate the array entity for targets that are exposing LUNs to the router. MPX200 Multifunction Router 169 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 170
CLI: 1. Open a miguser session using the following command: miguser start -p config 2. To rescan for target ports, enter the following command: target rescan For example: MPX200 (admin) #> target rescan Scanning Target WWPN 00:00:02:00:00:00:00:00 Target Rescan done Scanning Target WWPN 00:00:01:00 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 171
preceding job control actions from the summary view. To do so, right-click a specific job, and then select the appropriate action on the shortcut menu. MPX200 Multifunction Router 171 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 172
Viewing job details and controlling job actions in the CLI You can also perform the preceding job control actions from the summary view. To do so, right-click a specific job, and then click the appropriate action on the shortcut menu. To view data migration job details in the CLI: 1. Open a miguser - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 173
have been changed will now be saved. MPX200 (miguser) #> migration resume Job Id Type Status LUN ID LUN Size(MB) Src Symbolic Name 0 Offline Paused ( 18%) 7 10000 HP MSA-1 Please select a Migration Job Id migration job logs from both the GUI and the CLI. MPX200 Multifunction Router 173 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 174
: • Click OK to close the log window after you have finished viewing it. • Click Clear to delete the contents of the log. • Click Export to download the logs in CSV file format, which can be viewed in any spreadsheet application, such as Microsoft Excel. • Click Print to send the contents of - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 175
To view the data migration job log in the GUI: 1. On the mpx Manager main window, click the View Logs button. MPX200 Multifunction Router 175 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 176
• Time Stamp: Log entry time, based on router system time. • Group Name: User-defined job group or Group 0. • Job Name: User-defined name for the job. • Job to delete the contents of the log. • Click Export to download the logs in CSV format that can be viewed in a spreadsheet applic- ation, - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 177
MPX200 (admin) (miguser) #> show logs 10 10/09/2009 11:11:04 BridgeApp 10/09/2009 11:15:29 QLFC rscnInfo:0x2080000 VpIndex:0x0 10/09/2009 11:15:29 QLFC rscnInfo:0x2080000 VpIndex:0x1 10 the data migration log in the CLI: MPX200 (miguser) #> show migration_logs 5 MPX200 Multifunction Router 177 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 178
size 5.00 GB Thu Sep 10 13:39:45 2009 Seq id: 649 : Job Type: Migration : miguser :COMPLETED : JobId 0(Offline) of group Group 0 with priority 0 from Target HP HSV200-0 Lun Invalid Wwuln(6) to Target HP HSV200-0 Lun Invalid Wwuln(7) with migration size 5.00 GB MPX200 (miguser) #> Using the Verify - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 179
job wizard . 2. In the Verify Schedule Options dialog box, select the Scheduling Mode: either batch mode or individual job, and then click OK. 3. Click schedule. MPX200 Multifunction Router 179 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 180
it can become part of another job, if required. To acknowledge a completed data migration job: 1. In the left pane of the mpx Manager, select the Services tab, and then click Data Migration Jobs. 2. In the right pane, select the Completed Data Migration Jobs tab to bring that page to the front - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 181
offline array: 1. In the left pane of the mpx Manager, select the Services tab. 2. UnderFC Arrays, right-click the name of the offline array migration licenses are capacity-based and array-based licenses. Capacity-based licenses Capacity-based licenses allow you to MPX200 Multifunction Router 181 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 182
to install a data migration license key in the mpx Manager for Data Migration Services GUI. 1. In the mpx Manager, select the mpx Manager tab in the left pane. 2. In the left pane, click mpx HP StorageWorks MPX200: 3. In the right pane, select the Features tab. 4. On the Features - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 183
Applied Wed Oct 8 09:54:28 2009 MPX200 (miguser) #> Applying an array-based license to a specific array You can apply an array-based license to a specified storage array using either the mpx Manager GUI or the CLI. This section provides instructions for both methods. MPX200 Multifunction Router 183 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 184
license to a specific array in the GUI If you have purchased array-based licenses and installed the licenses in the MPX200, follow these steps to license a specific array for data migration. For every array that is licensed, one license is consumed: 1. In the left pane of - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 185
. Figure 109 License Array dialog box . The Information page for the selected array now shows the Array License as Licensed, as shown in Figure 110. MPX200 Multifunction Router 185 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 186
. Applying an array-based license to a specific array in the CLI If you have purchased array-based licenses and installed the licenses in the MPX200, follow these steps to 00:1f:e1:50:0a:e1:4c, 01-2b-00 HP HSV200-0 Unknown 1 50:00:1f:e1:50:0a:37:18, 01-24-00 HP HSV210-1 Unknown 2 50:06:01:69:41:e0:18 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 187
mpx MPX200: License usage appears on the Data Migration Info page, as shown in Figure 111. Figure 111 Data Migration Info . Viewing data migration license usage in the CLI Follow this procedure to view the usage of data migration licenses in the CLI: MPX200 Multifunction Router 187 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 188
10229.00 GB Array Based Licenses Array based licences issued 3 Array based licences used 0 Available array based licenses 3 Command Line Interface This section provides information on using the CLI for data migration services. It defines the guest MPX200 account and the user sessions, admin and - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 189
/begin] miguser [end/cancel/stop] For example: MPX200 #> miguser begin Password MPX200 (miguser) #> MPX200 (miguser) #> miguser stop MPX200 #> Commands Table 28 lists by type the DMS commands compare_luns resume" on page 214 "compare_luns acknowledge" on page 215 MPX200 Multifunction Router 189 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 190
show array target miscellaneous "show fc" on page 216 "show migration" on page 217 "show array" on page 218 "show luninfo" on page 220 "show migration_luninfo" on page 221 "show migration_params" on page 223 "show mgmt" on page 224 "show memory" on page 225 "show properties" on page 226 "show - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 191
Symbolic Name (Max = 64 characters) [Blade-1 ] Target Presentation Mode (0=Auto, 1=Manual) [Auto ] Controller Lun AutoMap (0=Enable, 1=Disable) [Disabled ] Target Access Control =0, Max=2) [0 ] All attribute values that have been changed will now be saved. MPX200 Multifunction Router 191 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 192
set features Saves and activates the array's data migration license key. Session: admin Example: MPX200 (admin) #> set features A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 193
set fc Sets the port status and programmed connection status Session: admin Example: MPX200 (admin) #> set fc A list of attributes with formatting and current values ] [2048 ] [256 ] All attribute values for Port 2 that have been changed will now be saved. MPX200 Multifunction Router 193 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 194
behave as either a source, a destination, or both. Session: miguser Example: MPX200 (admin)(miguser) #> set array A list of attributes with formatting and MBps ) Enable Load Balancing (0=Enable, 1=Disable) Array based licensed applied. [HP MSA2012fc-0] [3 ] [0 ] [Enabled ] All attribute - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 195
1 cannot be disabled; however, you can change its name. Session: admin Example: MPX200 (admin) (miguser) #> set vpgroups The following wizard will query for attributes before 4 All attribute values for VpGroup 4 that have been changed will now be saved. MPX200 Multifunction Router 195 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 196
job group that you can use to combine migration jobs to simplify scheduling and monitoring data migration processes. Session: miguser Example: MPX200 (miguser) #> migration_group add Please Enter Group Name that you want to create (Min = 4 Max = 64 chars) DM_1 Successfully created Group DM_1 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 197
of eight groups into which the MPX200 can classify data migration jobs. Session: miguser Example: MPX200 (miguser) #> migration_group remove Index Group Name 1 DM_1 2 DM_2 Please select a Group to be removed ('q' to quit): 1 Sucessfully removed Group DM_1 MPX200 Multifunction Router 197 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 198
mistakes that might have occurred when you typed the name while creating the data migration job group. Session: miguser Example: MPX200 (miguser) #> migration_group edit Index Group Name 0 Group 0 1 DM_1 2 DM_2 Please select a Group to be updated ('q' to quit): 0 Please Enter New - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 199
:1f:e1:50:0a:37:18, 00-00-00 Symbolic Name HP MSA2012fc-0 HP HSV200-1 DGC RAID-2 HP HSV210-3 Target Type -----------Src+Dest Src+Dest Src+Dest Src+Dest Please select a Destination Target from the list above ('q' to quit): 3 Index (VpGroup Name) 1 VPGROUP_1 MPX200 Multifunction Router 199 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 200
Please select a VPGroup for Destination Lun ('q' to quit): 1 LUN Vendor LUN Size( GB) Attributes 1 HP 10.00 2 HP 10.00 3 HP 20.00 4 HP 20.00 5 HP 10.00 6 HP 5.00 7 HP 5.00 8 HP 5.00 Please select a LUN as a Destination Lun('q' to quit): 1 I/O Size (0=32KB, 1=64KB, 2=128KB - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 201
Offline Running ( 5%) Job Description DGC RAID-2:VPG4:001 to HP HSV210-3 Please select a Job Id from the list above ('q' to quit): 0 Do you wish to continue with the operation(yes/no)? [No] yes All attribute values for that have been changed will now be saved. MPX200 Multifunction Router 201 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 202
use it on already-scheduled jobs to change the scheduling time. Session: miguser Example: MPX200 (admin)(miguser) #> migration stop Job Type Status ID --- ---- 0 Offline Running ( 61%) Job Description HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 203
the first block. Session: miguser Example: MPX200 (admin)(miguser) #> migration start Job Type Status Job Description ID --- ---- 0 Offline Stopped HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please values for that have been changed and will now be saved. MPX200 Multifunction Router 203 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 204
later resume the job from the block where the migration was paused. Session: miguser Example: MPX200 (admin)(miguser) #> migration pause Job Type Status Job Description ID 0 Offline Running ( 67%) HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above ('q' to - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 205
)(miguser) #> migration resume Job Type Status Job Description ID 0 Offline Paused ( 80%) HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that have been changed will now be saved. MPX200 Multifunction Router 205 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 206
this command, the migration job is permanently deleted from the database. Session: miguser Example: MPX200 (miguser) #> migration acknowledge Job Type Status Job Description ID 0 Offline Completed (100%) HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 207
serial scheduled jobs that have been configured but not yet started. Session: miguser Example: MPX200 (miguser) #> start_serial_jobs Serial Job Start Time (1=Now, 2=Delayed) [Now ] 2 Please jobs All attribute values for that have been changed will now be saved MPX200 Multifunction Router 207 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 208
specific job in the serial schedule queue. Session: miguser Example: MPX200 (admin) (miguser) #> compare_luns add A list of Size( GB) Attributes 1 HP 10.00 SRC LUN 2 HP 10.00 3 HP 20.00 4 HP 20.00 5 HP 10.00 6 HP 5.00 7 HP 5.00 8 HP 5.00 Please select a LUN - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 209
1 LUN Vendor LUN Size( GB) Attributes 1 HP 10.00 SRC LUN 2 HP 10.00 3 HP 20.00 4 HP 20.00 5 HP 10.00 6 HP 5.00 7 HP 5.00 8 HP 5.00 Please select a LUN as a Destination All attribute values for that have been changed will now be saved. MPX200 Multifunction Router 209 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 210
compare_luns rm Deletes a LUN compare job. Session: miguser Example: MPX200 (miguser) #> compare_luns rm Job Type Status Job Description ID 0 Offline Verify Running HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 Do you wish to continue with - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 211
MPX200 (miguser) #> compare_luns stop Job Type Status Job Description ID 0 Offline Verify Running HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that have been changed will now be saved. MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 212
a stopped LUN compare job. The compare process restarts from the first block. Session: miguser Example: MPX200 (miguser) #> compare_luns start Job Type Status Job Description ID 0 Offline Stopped HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 213
#> compare_luns pause Job Type Status Job Description ID --- ---- 0 Offline Verify Running HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that have been changed will now be saved. MPX200 Multifunction Router 213 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 214
job. The job resumes from the block where the compare was paused. Session: miguser Example: MPX200 (miguser) #> compare_luns resume Job Type Status Job Description ID --- ---- 0 Offline Verify Paused HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 215
(miguser) #> compare_luns acknowledge Job Type Status Job Description ID 0 Offline Completed HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that have been changed will now be saved. MPX200 Multifunction Router 215 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 216
port, along with the port name and node name. Session: admin Example: MPX200 (admin) #> show fc FC Port Information FC Port Port Status Port ID WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID Firmware Revision No. Frame Size Execution Throttle Connection Mode SFP Type FC1 Enabled - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 217
64 KB 96% Complete 86 MBps Fri Oct 9 10:56:56 2009 ----HP HSV210-3 1:1 60:05:08:b4:00:05:4d:94:00:00:f0:00:35:a1:00:00 10.00 GB HP MSA2012fc-0 1:1 60:0c:0f:f0:00:d5:9a:cb:4d:00:25:4a:01:00:00:00 10.24 GB MPX200 Multifunction Router 217 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 218
show array Displays the status of array objects identified by the DMS. Session: miguser Example: MPX200 (miguser) #> show array Array Information Symbolic Name HP HSV200-0 State Online Vendor ID HP Product ID HSV200 Target Type Src+Dest WWPN 50:00:1f:e1:50:0a:e1:4c Port ID 01-2b- - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 219
Load Balancing Array License Enabled Not Applied MPX200 Multifunction Router 219 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 220
details, run the show luns command instead. Example: MPX200 (miguser) #> show luninfo MPX200 (admin) #> show luninfo Index ----0 1 2 10,50:00:1f:e1:50:0a:37:18 50:00:1f:e1:50:0a:37:10 00:35:a1:00:00 LUN Number 1 VendorId HP ProductId HSV210 ProdRevLevel 5000 Portal 0 Lun Size 10240 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 221
Target Type Src+Dest Src+Dest Source Destination Index ----0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 (LUN/VpGroup 0/VPGROUP_1 1/VPGROUP_1 2/VPGROUP_1 3/VPGROUP_1 4/VPGROUP_1 :a9:4a:01:00:00:00 0 HP MSA2012fc J200 0 10240 MB Online LUN Path Information MPX200 Multifunction Router 221 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 222
Controller Id 0 WWPN, PortId 20:78:00:c0:ff:d5:92:e5, 02-04-00 Path Status ----------Current Optimized 222 Offline Data Migration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 223
show migration_params Displays the current time and start time of a serial scheduled job. Session: miguser Example: MPX200 (miguser) #> show migration_params Current Time : Mon Dec 15 08:36:12 2009 Serial Scheduled Start Time : Mon Dec 15 08:37:00 2009 MPX200 Multifunction Router 223 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 224
show mgmt Displays management port information, including the IP address, subnet mask, and gateway. Session: miguser Example: MPX200 (miguser) #> show mgmt Management Port Information IPv4 Interface Enabled IPv4 Mode Static IPv4 IP Address 172.35.14.53 IPv4 Subnet Mask 255.255.254.0 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 225
show memory Displays the free and total memory. Session: miguser Example: MPX200 (miguser) #> show memory Memory Units Physical Buffer Pool Nic Buffer Pool Process Blocks /8192 2048/2048 14336/14336 0/0 0/0 0/0 4096/4096 Connections: GE1 GE2 256/256 256/256 MPX200 Multifunction Router 225 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 226
show properties Displays the CLI properties. Session: miguser Example: MPX200 (miguser) #> show properties CLI Properties Inactivty Timer Prompt String 15 minutes MPX200 226 Offline Data Migration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 227
Total capacity licensed Migration license consumed License consumed by active jobs Total capacity available Array Based Licenses Array based licences issued Array based licences used Available array based licenses 10240.00 GB 1.00 GB 10.00 GB 10229.00 GB 3 0 3 MPX200 Multifunction Router 227 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 228
show perf Displays the performance (in bytes) of the active job. Session: miguser Example: MPX200 (miguser) #> show perf WARNING: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Port Number -----GE1 GE2 FC1 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 229
Displays the active job performance in bytes. Session: miguser Example: MPX200 (miguser) #> show perf byte WARNING: Valid data is only displayed 187M 187M 0 0 188M 188M 0 0 186M 186M 0 0 187M 187M 0 0 186M 186M 0 0 170M 170M 0 0 189M 189M MPX200 Multifunction Router 229 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 230
show features Displays the feature key information. Session: miguser Example: MPX200 (admin) (miguser) #> show features License Information FCIP 1Gig Not Licensed DM Capacity Licensed DM Array Licensed Feature Key Information Key 806400-LCPJRHKUYZ9NS-DM-100TB (DATA- - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 231
group Group 0 with priority 0 from Target HP HSV200-0 Lun 60:05:08:b4:00:07:59:a4:00:02:a0:00:00:7e:00:00(6) to Target HP HSV200-0 Lun 60:05:08:b4:00:07:59:a4:00:02:a0:00:00:83:00:00(7) with migration size 5.00 GB MPX200 Multifunction Router 231 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 232
log BridgeApp event information. Session: miguser Example: MPX200 (admin) (miguser) #> show logs 10 10/09/2009 11:11:04 BridgeApp 3 QLFC_Login: Port Name 500601604ba035de 10/09/2009 11:15:29 QLFC 3 #0: QLIsrEventHandler: RSCN update (8015) rscnInfo:0x2080000 VpIndex:0x0 10/09/2009 11:15:29 QLFC - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 233
3 VPGROUP_1 4 VPGROUP_1 5 VPGROUP_1 6 VPGROUP_1 7 VPGROUP_1 8 VPGROUP_1 9 VPGROUP_1 10 VPGROUP_1 11 VPGROUP_1 12 VPGROUP_1 13 VPGROUP_1 14 21:78:00:c0:ff:d5 8 VPGROUP_1 9 50:00:1f:e1:50:0a:37:18 VPGROUP_1 0 VPGROUP_1 1 VPGROUP_1 2 MPX200 Multifunction Router 233 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 234
VPGROUP_1 3 VPGROUP_1 4 VPGROUP_1 5 VPGROUP_1 6 VPGROUP_1 7 VPGROUP_1 8 50:00:1f:e1:50:0a:37:1b VPGROUP_1 0 VPGROUP_1 1 VPGROUP_1 2 VPGROUP_1 3 VPGROUP_1 4 VPGROUP_1 5 VPGROUP_1 6 VPGROUP_1 7 VPGROUP_1 8 234 Offline Data Migration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 235
Information WWNN 50:08:05:f3:00:1a:15:10 WWPN 50:08:05:f3:00:1a:15:11 Port ID 02-03-00 State Online WWNN WWPN Port ID State 50:08:05:f3:00:1a:15:10 50:08:05:f3:00:1a:15:19 02-07-00 Online MPX200 Multifunction Router 235 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 236
targets and allow the target to expose more LUNs to the router. The router provides the VP group by combining virtual port entities from each Channel port, there are four VP groups. Session: miguser Example: MPX200 (miguser) #> show vpgroups VpGroup Information Index VpGroup Name Status WWPNs - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 237
:00:1a:15:11 Target Rescan done Scanning Target WWPN 50:08:05:f3:00:1a:15:19 Target Rescan done Target Re-Scan completed MPX200 Multifunction Router 237 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 238
the system log that you can use to detect and troubleshoot problems when the MPX200 is exhibiting erroneous behavior. This command generates a System_Capture.tar.gz file that provides a detailed analysis. Session: admin Example: MPX200 (admin) #> save capture Debug capture completed. Package is - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 239
Name Target Type 0 50:00:1f:e1:50:0a:e1:4c, 01-0c-00 HP HSV200-0 Src+Dest 1 50:00:1f:e1:50:0a:37:1b, 02-04-00 HP HSV210-1 Src+Dest 2 20:70:00:c0:ff:d5:9a:05, 02-0f license [No] yes All attribute values for that have been changed will now be saved. MPX200 Multifunction Router 239 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 240
ports (shown by the show migration_usage command) for which you have removed an array without also removing the array's license. Session: miguser Example: MPX200 (admin) (miguser) #> array_licensed_port rm 01. Symbolic name = DGC RAID-1 No of ports registered = 2 WWNN, WWPN 50:06:01:60:cb:a0:35 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 241
, and makes room to configure more serial jobs. Session: miguser Example: MPX200 (miguser) #> readjust_priority Are you sure you want to adjust the priorities of serially scheduled jobs that haven't started (y/n): y Priorities have been successfully re-adjusted. MPX200 Multifunction Router 241 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 242
jobs. It also lists the configuration details of the selected job. Session: miguser Example: MPX200 (miguser) #> show compare_luns Compare State Type ( 1=Running 2=Failed 3=Completed 4=All 01:60:96:02:1a:00:84:f3:f5:81:89:9e:de:11 10.00 GB MSA-2012 1:0 60:0c:0f:f0:00:d5:9c:a4:31:d4:a9:4a:01: - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 243
• I/O traffic serviced by the array from other instead of simultaneously starting all jobs. • The MPX200 is capable of simultaneously configuring a maximum of 256 jobs. However, HP re- commends that you simultaneously run only four port interconnect mode settings. MPX200 Multifunction Router 243 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 244
owned by both ControllerA and ControllerB, use the following workaround: 1. Add array-based licenses (a Single Array or Three Array License) as required. 2. Present Zone out the MSA2012fc ports and the MPX200 ports. 9. Unpresent the LUNs presented in Step 2. 10. Change the ownership of LUNs from - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 245
reboot the MPX200. Troubleshooting Table 29 lists some problems that may occur with the data migration service and provides a possible reason or solution for each. Table 29 Troubleshooting Problem The show array. Use the set array command to set it appropriately. MPX200 Multifunction Router 245 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 246
you to configure a migration job but may not be able to do any data access operations for that LUN. The MPX200 displays the following messages: Array reconfiguration detected. Refer to user manual for trouble shooting. WWULN: 60:05:08:b4:00:05:4d:94:00:00:c0:0 0:00:2c:00:00 and WWULN: 60 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 247
is a case of reconfiguration and the associated job will have to be deleted. For more information, see "Reconfiguring LUNs on a storage array" on page 245. MPX200 Multifunction Router 247 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 248
248 Offline Data Migration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 249
troubleshoot problems. Diagnostic information is also available through diagnostics, HP Command View EVA, and the CLI event logs and error messages. MPX200 not, make the necessary repairs. If the problem persists, proceed to the next step. 3. Replace the MPX200 blade. MPX200 Multifunction Router 249 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 250
MPX200 firmware or hardware. If the System Fault LED is illuminated, check the Heartbeat LED for an error blink pattern and take the necessary actions. See Heartbeat LED blink patterns for more information. Power-on self-test (POST) diagnostics The MPX200 the MPX200. MPX200 the MPX200 is - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 251
the MPX200 blade A flashing blue LED indicates that the MPX200 blade's beacon is ON. There are two ways to identify the location of an MPX200 blade. • Enter the CLI command beacon on (Figure 117). Figure 117 Using the beacon on command to locate an MPX200 blade . MPX200 Multifunction Router 251 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 252
LED (Figure 118). Figure 118 Using HP Command View EVA to locate a hardware device . MPX200 log data The MPX200 maintains a log that can be displayed stats. MPX200 ping command The ping command is the most basic network troubleshooting tool that is available to troubleshoot FCIP route problems. This - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 253
using HP Command View EVA You can use HP Command View EVA to display the properties for each iSCSI controller. At a glance, you can check each controller's serial number, temperature, and power/cooling status (Figure 120). Figure 120 iSCSI controller properties . MPX200 Multifunction Router 253 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 254
on each MPX200 blade. Solution 3: Ensure that the HP Command View HP Command View EVA discovery screen. Initiator cannot log in to MPX200 iSCSI target Solution 1: Ensure that you are using the correct iSCSI port IP address. Solution 2: In HP . Initiator logs in to MPX200 iSCSI target, but EVA- - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 255
properties to the initiator's target login (Figure 122 and Figure 123). Figure 122 Virtual disk properties: Host details . Figure 123 iSCSI initiator properties: Targets tab . MPX200 Multifunction Router 255 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 256
button. HP Command MPX200 FC connections to the EVA. Cannot change iSCSI controller IP port attributes. Enable the iSCSI controller IP port. Command not supported with this version of the iSCSI controller. Check the firmware version and update if necessary. 256 Diagnostics and troubleshooting - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 257
is being used to restore the configuration. Operation failed. iSCSI controller code load file cannot The firmware file may be invalid or corrupt. Obtain open/read. another copy of the file. The load file extension. Ensure that the correct file is being used. MPX200 Multifunction Router 257 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 258
258 Diagnostics and troubleshooting - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 259
• HP StorageWorks Enterprise Virtual Array user guide for your array • HP StorageWorks SAN design reference guide You can also find the documents referenced in this guide on the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals MPX200 Multifunction Router 259 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 260
versions, firmware updates, and other product resources. Product feedback To make comments and suggestions about HP StorageWorks Command View EVA, please send a message to: [email protected]. Documentation feedback HP welcomes your feedback. To make comments and suggestions about the MPX200, please - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 261
Partner Locator: http://www.hp.com/service_locator • HP Software Downloads: http://www.hp.com/support/downloads • HP Software Depot: http://h20293.www2.hp.com • HP Single Point of Connectivity Knowledge (SPOCK) http://www.software.hp.com • HP StorageWorks SAN manuals: http://www.hp.com/go/sdgmanuals - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 262
. • Extend only one rack component at a time. Racks can become unstable if more than one component is extended. Product warranties For information about HP StorageWorks product warranties, see the warranty information website: http://www.hp.com/go/storagewarranty 262 Support and other resources - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 263
. Each command description includes syntax, keywords, notes, and examples. Command syntax The MPX200 CLI command syntax uses the following format: command keyword keyword [value] keyword [value1 that: • Commands for monitoring tasks are available to all accounts. MPX200 Multifunction Router 263 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 264
This section lists and describes the MPX200 CLI commands in alphabetical order. Each Admin session to execute commands that change the router configuration. An inactive Admin session times out after user. Use this keyword with care because it terminates the Admin session without warning the other user - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 265
Syntax Keywords Admin session clear logs stats logs Clears all entries from the router's log file. stats Resets the statistics counters. Examples: The following examples show the clear commands: MPX200 (admin) #> clear logs MPX200 (admin) #> clear stats MPX200 Multifunction Router 265 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 266
command for the chassis: MPX200 #>exit (none) login: Example 2: At the blade management level, exit returns you to the chassis management level. The following example shows the exit command for the blade: MPX200 (admin) #> exit HP StorageWorks MPX200 #> 266 Command referencecommand reference - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 267
Configure a new FCIP route mod Modify an existing FCIP route rm Remove an existing FCIP route Example 1: MPX200 (admin) #> fciproute add A list of attributes with formatting and current values will follow. Enter a press 'q' or 'Q' and the ENTER key to do so. MPX200 Multifunction Router 267 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 268
Enabled [2 [3225 [Auto [45 [Disabled [Disabled [Save 150 ] ] ] All attribute values for FCIP Route 1 will now be saved. MPX200 (admin) #> Example 3: MPX200 (admin) #> fciproute rm A list of attributes with formatting and current values will follow. Enter a new value or simply press the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 269
. Authority Syntax None help Example 1: The help command differs for the chassis and the blade. The following example shows the help command for the chassis: MPX200 #>help blade [1 | 2] exit help history MPX200 Multifunction Router 269 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 270
logout quit show [chassis] Example 2: The following example shows the help command for the blade: MPX200 #> help admin [begin | end | start | stop | cancel] beacon [ on | off ] date [MMDDhhmmCCYY] clear [logs | stats] exit fru [restore | save] help history image [cleanup | list | unpack] - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 271
in the [file] parameter, and then installs the firmware image on the router. Before using this command, you must use FTP to transfer the firmware image file to the router's /var/ftp directory. To activate the new firmware, you must reboot the router. Example 1: MPX200 Multifunction Router 271 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 272
. Please reboot the system for FW to take effect. MPX200 (admin) #> reboot Are you sure you want to reboot the System (y/n): y System will now be rebooted... Initiator Adds, modifies, or removes an initiator in the router's database. Authority Syntax Keywords Admin session add initiat- mod - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 273
will now be saved. Logout Exits the CLI and returns you to the login prompt. Authority Syntax None logout Example: MPX200 (admin) #> logout (none) login: Lunmask Maps a target LUN to an initiator, and removes mappings. The :37:fd:8a:b0,22:00:00:20:37:fd:8a:b0 MPX200 Multifunction Router 273 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 274
Example 2: The following example shows the lunmask add command with VPGs: MPX200 (admin) #> lunmask add Index Mapped (WWNN,WWPN/iSCSI Name 0 will now be saved. Example 3: The following example shows the lunmask rm command: MPX200 (admin) #> lunmask rm Index (WWNN,WWPN/iSCSI Name 0 20:00:00:20 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 275
Example: MPX200 (admin) #> ping A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or MPX200 Multifunction Router 275 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 276
time=0.2ms Ping Statistics for fe80::217:a4ff:fe99:c279: Packets: Sent = 10, Received = 9, Lost = 1 Approximate round trip times in milli-seconds: Minimum MPX200 (admin) #> quit HP StorageWorks MPX200 #> Reboot Restarts the blade firmware. Authority Syntax Admin session reboot Example: MPX200 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 277
the debug capture file from the blade. logs The save logs command creates a tar file that contains the router's log data, storing the file in the router's /var/ ftp directory. When the command has finished executing, you must FTP the log's tar file from the blade. MPX200 Multifunction Router 277 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 278
FTP the trace's tar file from the blade. The system notifies you if the router does not have any dump data. Each time it generates dump data, the system adds an event log entry. Example 1: MPX200 (admin) #> save capture Debug capture completed. Package is System_Capture.tar.gz Please use FTP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 279
.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070cec 7 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04.50001fe150070cec Please select a iSCSI node from the list above ('q' to quit): 0 A list of attributes with formatting and current values will follow. MPX200 Multifunction Router 279 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 280
key to do so. Index iSCSI Name 0 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.0 1 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.1 2 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9 3 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9 4 iqn.1986-03.com - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 281
been changed will now be saved. Set features Applies license keys to the router. The date and time must be set on the router before applying a new key. NOTE: This option is not currently supported. It will be supported in a future release. Authority Admin session MPX200 Multifunction Router 281 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 282
Window Size (Min=8124B, Max=1048576B) [65536 ] IPv4 Address [10.3.5.205 ] IPv4 Subnet Mask [255.255.255.0 ] IPv4 Gateway IPv6 Address 1 [:: ] IPv6 Address 2 [:: ] IPv6 Default Router [:: ] IPv6 TCP Port No. (Min=1024, Max=65535 Syntax Admin session set isns Example: MPX200 (admin) #> set isns A - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 283
1=Disable) [Disabled ] 0 iSNS Address (IPv4 or IPv6) [0.0.0.0 ] 10.3.6.33 TCP Port No. [3205 ] All attribute values that have been Interface (0=Enable, 1=Disable) [Enabled] IPv6 Mode (0=Manual, 1=AutoConfigure) [Manual ] 1 All attribute values that have been changed MPX200 Multifunction Router 283 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 284
press 'q' or 'Q' and the ENTER key to do so. CLI Inactivity Timer (0=Disable, 1=15min, 2=60min) [15min ] CLI Prompt (Max=32 Characters) [HP StorageWorks MPX200 ] All attribute values that have been changed will now be saved. Set SNMP Configures general SNMP) properties and eight trap destinations - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 285
Trap Destination 1 Destination enabled (0=Enable, 1=Disable) [Disabled ] 0 IP Address [0.0.0.0 ] 10.0.0.5 Destination Port [0 ] 1024 Trap Version [0 ] 2 Configuring SNMP Trap Destination 2 valid iSCSI name characters will be accepted. Valid characters include MPX200 Multifunction Router 285 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 286
over WAN, 3=Data Migration) [iSCSI Connectivity] Target Presentation Mode (0=Auto, 1=Manual) [Auto ] Lun Mapping (0=Enable, 1=Disable) [Disabled ] Controller Lun : The following example shows how to enable VPGs 2 and 3: MPX200 (admin) #> set vpgroups The following wizard will query for attributes - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 287
Displays iSCSI port and configuration information. See "show iSCSI command" on page 292. Displays the router's iSCSI name server (iSNS) configuration. See "show iSNS command" on page 293. Displays the router's logging information. See "show logs command" on page 293. MPX200 Multifunction Router 287 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 288
mgmt Displays the router's management port (10/100) configuration. See "show mgmt command" on page 296. ntp Displays the router's NTP configuration. See on page 300. system Displays router product information, including the serial number, software version, hardware version, configuration, and - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 289
Name HP StorageWorks MPX200 Symbolic Name Blade-2 Serial Number 0836E00018 HW Version 20694-03 A SW Version 3.0.1.2 Temp (Front/Rear/CPU1/CPU2) 46C/34C/38C/38C Power Cooling Module 2 Status Installed Power Source Not Connected Fan1/Fan2/Fan3 Healthy/Healthy/Healthy MPX200 Multifunction Router 289 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 290
None show fc [port_num] [port_num] Identifies the number of the FC port. Example: MPX200 #> show fc 2 FC Port Information FC Port 2 Link Status Up Current Link Rate WWPN 21:00:00:c0:dd:0c:8b:ef Port ID 00-00-ef Firmware Revision No. 3.03.07 Frame Size 2048 Execution Throttle 64 Connection Mode - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 291
information. Example: MPX200 #> show initiators Initiator Information Initiator Name iqn.1991-05.com.microsoft:server1 Alias IP Address 0.0.0.0 Status Logged Out OS Type MS Windows Show initiators LUNmask Displays all LUNs mapped to the specified initiator. MPX200 Multifunction Router 291 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 292
) #> show iscsi iSCSI Port Information iSCSI Port GE1 Port Status Enabled Link Status Up iSCSI Name iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.0 Firmware Revision 3.00.01.57 Current Port Speed 1Gb/FDX Programmed Port Speed Auto MTU Size Jumbo Window Size 32768 MAC Address - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 293
Example: MPX200 #> show logs 01/01/2008 00:00:13 System 3 Tuesday 01 January 12:13 AM 01/01/2008 00:00:21 QL4022 3 #0: QLIsrDecodeMailbox: Link up 01/01/2008 00:00:13 System 3 Tuesday 01 January 12:13 AM 01/01/2008 00:00:22 QL4022 3 #0: QLIsrDecodeMailbox: Link up MPX200 Multifunction Router 293 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 294
WWULN 50:00:1f:e1:50:07:0c:e0 LUN Number 0 VendorId HP ProductId HSV210 ProdRevLevel 5000 Portal 1 Lun Size 0 MB Lun State Online information for each target. Authority Syntax None show luns Example: MPX200 #> show luns Target(WWPN) VpGroup LUN ============ ======= === 50 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 295
from the list above ('q' to quit): 0 Index ----0 1 2 3 4 5 6 7 8 9 10 11 12 (LUN/VpGroup) ------ 0/VPGROUP_1 0/VPGROUP_2 1/VPGROUP_2 2/VPGROUP_2 3/VPGROUP_2 4/VPGROUP_2 5/VPGROUP_2 6/VPGROUP_2 7/ var/ftp/directory. Authority Syntax None show memory Example: MPX200 Multifunction Router 295 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 296
: GE1 256/256 GE2 256/256 GE3 256/256 GE4 256/256 Show mgmt Displays the blade's management port (10/100) configuration. Authority Syntax None show mgmt Example: MPX200 (admin) #> show mgmt Management Port Information IPv4 Interface Enabled IPv4 Mode Dhcp IPv4 IP Address 172.17.137.129 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 297
MPX200 #> show perf init_rbyte WARNING: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Displaying bytes/sec (initiator mode read)... (Press any key to stop display) GE1 GE2 GE3 GE4 FC1 FC2 0 0 0 0 0 0 MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 298
0 0 Show presented targets Displays the targets presented by the FC router, iSCSI router, or both. Authority Syntax Keywords None show presented_targets fc iscsi fc iscsi :00:1f:e1:50:07:0c:e9 Name iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9 Alias WWNN 50:00:1f: - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 299
iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01. MPX200 #> show properties CLI Properties Inactivity Timer 15 minutes Prompt String MPX200 Show SNMP Displays the router's SNMP configuration and any configured traps. Authority Syntax None show snmp Example: MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 300
Public Trap Community Private System Location System Contact Authentication traps Disabled System OID 1.3.6.1.4.1.3873.1.5 System Description HP StorageWorks MPX200 Trap Destination 1 IP Address 10.0.0.5 Trap Port 1024 Trap Version 2 Show stats Displays the blade statistics for FC and iSCSI - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 301
PDUs Rcvd 2655246170 Data Bytes Rcvd 0 I/O Completed 1815115669 Unexpected I/O Rcvd 0 iSCSI Format Errors 0 Header Digest Errors 0 Data Digest Errors 0 Sequence Errors 0 PDU Xmit Count 2729500577 MPX200 Multifunction Router 301 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 302
hardware and software versions, number of ports, and temperature. Authority Syntax None show system Example: MPX200 #> show No. of iSCSI Ports Telnet SSH Temp (Front/Rear/CPU1/CPU2) HP StorageWorks MPX200 Blade-1 iSCSI Server Connectivity Enabled Disabled 0851E0014 20694-03 3.0.1.2 0.97.0.4 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 303
command for a specific VPG: MPX200 #> show vpgroups 2 VpGroup Information Index VpGroup Name Status WWPNs 2 VPGROUP_2 Enabled 21:01:00:c0:dd:13:16:44 21:01:00:c0:dd:13:16:45 Example 2: The following example shows the show vpgroups command for all VPGs: MPX200 Multifunction Router 303 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 304
dd:13:16:45 Shutdown Shuts down the blade. Authority Syntax Admin session shutdown Example: MPX200 (admin) #> shutdown Are you sure you want to shutdown the System (y/n): n Command longer connected to the router. Authority Syntax Keywords Admin session target rm rm Removes a target from - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 305
Example: MPX200 (admin 10.7.9.5 1.1ms 1.1ms 1.1ms 3 172.21.130.233 2.7ms 2.7ms 2.6ms 4 172.21.4.245 291.4ms 291.4ms 291.4ms 5 172.21.4.246 413.6ms 417.1ms 439.2ms 6 10.35.9.1 459.1ms 465.6ms 480.0ms 7 172.35.14.17 495.3ms 483.0ms 505.9ms Traceroute completed in 7 hops. MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 306
306 Command referencecommand reference - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 307
: 1. Configure the workstation port with the following settings: • 115,200 baud • 8-bit character • 1 stop bit • No parity 2. When prompted, enter an account name and password. MPX200 Multifunction Router 307 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 308
help blade [ 1 | 2 ] exit help history logout quit show [ chassis ] Account name: guest Password: password MPX200 #> show chassis Chassis Information Product Name HP StorageWorks MPX200 Chassis Name Router Chassis Name Serial Number 0834E00019 HW Version 20697-03 A Fan Speed Normal Blade - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 309
172.17.137.102 Connected to 172.17.137.102. 220 (none) FTP server (GNU inetutils 1.4.2) ready. User (172.17.137.102:(none)): ftp 331 Guest login ok, type your name as password. Password: ftp 230 Guest login ok, access restrictions apply. ftp> bin 200 Type set to I. MPX200 Multifunction Router 309 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 310
login ok, access restrictions apply. ftp> bin NOTE: Dual-blade MPX200s perform an automatic field-replaceable unit (FRU) restore on a new blade any time it is detected in the chassis. 200 Type set to I. ftp> put HP StorageWorks MPX200_FRU.bin 200 PORT command successful. 150 Opening BINARY mode data - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 311
the router through third-party applications that support SNMP. The router firmware supports SNMP versions 1 and 2 and a QLogic Management Information Base (MIB) (see "Management Information Base " traps in response to authentication failures. The default is disabled. MPX200 Multifunction Router 311 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 312
A maximum of eight trap addresses are supported. The default address for traps is (zero). Most SNMP managers and management software listen on this port for SNMP traps. different addresses. Management Information Base This section describes the are operational on the router. The entries in - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 313
. INTEGER 1 = Static 2 = DHCP 3 = Bootp 4 = RARP Read-only Method by which the port gets its IP address. InetAddressType Read-only IP address type: ipv4 or ipv6. MPX200 Multifunction Router 313 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 314
port. QsrLinkRate Read-only Operational link rate for this port. FC port table This table contains a list of the Fibre Channel (FC) ports on the router. There are as many entries in this table as there are FC ports on the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 315
frame shuttle mode. qsrFcPortIndex Syntax Access Description Unsigned32 Not accessible A positive integer indexing each FC port in a given role. qsrFcPortNodeWwn Syntax Access PhysAddress Read-only MPX200 Multifunction Router 315 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 316
Current link rate for this port. Initiator object table The initiator object table is a list of the iSCSI initiators that have been discovered by the router. There are as many entries in this table as there are iSCSI initiators on the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 317
integer denoting each iSCSI initiator discovered by the router. qsrIsInitName Syntax Access Description SnmpAdminString Not accessible iSCSI name of the initiator. qsrIsInitAlias Syntax Access Description SnmpAdminString Read-only Alias for the iSCSI initiator. MPX200 Multifunction Router 317 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 318
, 2 = loggedIn, 3 = loggedOut, 4 = recovery Read-only Status of the iSCSI initiator, that is, whether or not it is logged in to the router. SnmpAdminString Read-only The type of the iSCSI initiator's operating system. Integer: 0 = enabled; 2 = disabled Read-only A value indicating whether CHAP is - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 319
LUN. qsrLunVendorId Syntax Access Description SnmpAdminString Read-only Vendor ID for the LUN. qsrLunProductId Syntax Access Description SnmpAdminString Read-only Product ID for the LUN MPX200 Multifunction Router 319 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 320
qsrLunProdRevLevel Syntax Access Description qsrLunSize Syntax Access Description qsrLunState Syntax Access Description qsrLunVPGroupid Syntax Access Description qsrLunVPGroupname Syntax Access Description SnmpAdminString Read-only Product revision level for the LUN Unsigned32 Read-only Size of the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 321
. qsrVPGroupName Syntax Access Description SnmpAdminString Read-only VP group name or host group name. qsrVPGroupWWNN Syntax Access Description VpGroupWwnnAndWwpn Read-only Worldwide port number (WWPN) MPX200 Multifunction Router 321 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 322
qsrVPGroupStatus Syntax Access Description Integer: 0 = enabled; 1 = disabled Read-only Maintain the status of the VP group (enabled/disabled) 322 Simple Network Management Protocol setup - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 323
Description SEQUENCE OF QsrSensorEntry Not accessible List of all the sensors on the router. The table contains as many entries (rows) as there are sensors. Description Unsigned32 Not accessible A positive integer identifying each sensor of a given type. MPX200 Multifunction Router 323 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 324
value is within normal operational limits. Warning = The sensor value is approaching a threshold. Critical = The sensor value has crossed a threshold. Notifications This section describes the MPX200 notification types. 324 Simple Network Management Protocol setup - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 325
software (firmware) version number. qsrNoOfFcPorts Syntax Access Description Unsigned32 Read-only Quantity of FC ports on the system. qsrNoOfGbEPorts Syntax Access Description Unsigned32 Read-only Quantity of gigabit Ethernet ports on the system. qsrAgentVersion MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 326
Description SnmpAdminString Read-only Version number of the agent software on the system. Notification objects This section defines the notification The agent startup notification indicates that the agent on the router has started running. qsrAgentStartup uses the qsrEventTimeStamp object. Agent - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 327
(mapping) The target presentation notification indicates that the specified target has been presented (mapped) or unpresented (unmapped). qsrPresTgtMapped uses the following objects: • qsrBladeSlot • qsrEventTimeStamp • qsrPresTgtMapped MPX200 Multifunction Router 327 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 328
• qsrPresTgtUnmapped • qsrEventSeverity Target presentation notifications are sent for the following event: • Target Presentation • State: Presented (mapped) or unpresented (unmapped) • Target name • Blade number (1 or 2) VP group notification The VP group notification indicates that the specified - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 329
change • Blade number (1 or 2) • NTP configuration change • Blade number (1 or 2) • Router configuration change • Blade number (1 or 2) • Management port configuration change • Blade number (1 or 2) • Firmware upgrade complete • Blade number (1 or 2) • Reboot blade MPX200 Multifunction Router 329 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 330
• Blade number (1 or 2) 330 Simple Network Management Protocol setup - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 331
= FC driver • iSCSI = iSCSI driver • System = System module • TOE = TCP/IP offload engine module • User = User module (iSCSI, FCIP, or DMS) • The Msg. Type column specifies the log message type, where: • Error = unsupported head-of-queue task management command. MPX200 Multifunction Router 331 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 332
: 41267 Target not found. Target App name: Error iSCSI login PDU received for a target with a target name unknown to the router. 41268 QLIS_LoginPduContinue: Missing target name App Error iSCSI login PDU received without a target name for a normal session. QLIS_LoginPduContinue: 41270 TSIH - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 333
the router as part of its discovery process. Error Pass-Through command issued by management application (such as GUI) was aborted. Error Pass-Through command issued by management application (such as GUI) failed due to invalid command descriptor block (CDB) length. MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 334
QLBI_Ioctl: ERROR: Opera41750 tion (0x%x) not supported App in this mode Error IOCTL operation unsupported status. The Report LUNs command was issued by the router as part of its discovery process. QLBI_GetLunList: Lun a system error (unrecoverable firmware error). 42069 QLFC_HandleTeb: Driver - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 335
to allocate data buffer (length %d). 53254 System Booting Up. App Info Router is booting up. QLBA_ProcessTpb: De-com- 53357 pression failed. Disabling compression of Initiator: %s. 53587 QLIS_LoginPduContinue: Target: %s App Info iSCSI login of Target: %s. MPX200 Multifunction Router 335 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 336
54274 QLFC_Login: Origin 0x%x, VP Index 0x%x, Id 0x%x App Info FC login occurred, origin xx (1 = adapter, 2 = target, 3 = initiator), VP (virtual port) xx, ID (loop ID) xx. 54275 QLFC_Login: Port ID %.2x%.2x%.2x App Info FC login occurred with port ID xx.xx.xx. 54276 QLFC_Login: Node Name - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 337
processor failed. 70417 #%d: QLInitializeAdapter: iSCSI Fatal iSCSI processor firmware initialization failed. QLInitializeFW failed 70432 #%d: QLDoInterruptServiceRoutine: PortFatal %04x %04x %04x %04x %04x %04x iSCSI Fatal iSCSI processor fatal system error. MPX200 Multifunction Router 337 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 338
reported that an SNS response had an invalid handle. 73990 #%d: QLUtmIoctlEnable: Initialize FW failed iSCSI Error iSCSI processor failed firmware initialization. #%d: QLRunDiag: MBOX Diag 74056 test internal loopback iSCSI failed %x %x Error iSCSI processor failed the internal loopback test - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 339
#%d: QLProcessSystemError: Restart RISC iSCSI Error iSCSI processor was restarted. 74746 #%d: QLInitializeFW: MBOX_CMD_INITIALIZE_FIRMWARE failed %04x %04x %04x %04x %04x %04x iSCSI Error iSCSI processor rejected the firmware initialize command. MPX200 Multifunction Router 339 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 340
/unused iSCSI initiators. #%d: QLSetTargetData: No 74800 more room in Target Data- iSCSI base. Error Driver's target database is full. Use the CLI or GUI to remove 102657 #%d: QLInitializeAdapter: Load RISC code failed FC Fatal FC processor firmware load failed. 340 Log messageslog messages - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 341
commands. Error FC processor was disabled by an IOCTL request to the driver. Error FC processor firmware failed initialization. The request to initialize was received by the driver in an IOCTL request. Error FC processor failed the external loopback test. MPX200 Multifunction Router 341 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 342
out of slots in target FC database #%d: QLUpdateDeviceData107041 base 0x%x: GET_ID failed FC %x #%d: QLUpdateDeviceDatabase 107056 0x required. This failure occurs only when the FC processor is running multi-ID firmware. Error Driver was unable to re-establish connection to the target within the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 343
FC processor's mailbox 1, 2, and 3 registers. 139265 QBRPC_Initialize: Entered User Error RPC (remote procedure call) server initialization entry point. QBRPC_Initialize:Get139266 Bridge Mem Allocation er- User ror Error Get System API memory allocation failed. MPX200 Multifunction Router 343 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 344
Failed memory allocation for Get FC SFP API. 139281 QBRPC_Initialize:GetLog Mem Allocation error User Error Failed memory allocation for Get Log API. 139282 QBRPC_Initialize:GetStats User Error Failed memory allocation for Get Statistics API. Mem Allocation error 139283 QBRPC_Initialize - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 345
changed User Info NTP configuration has changed. #%d: qapisetvlan151893 params_1_svc: VLAN config- User Info uration changed VLAN configuration has changed. 151894 qapisetlunmask_1_svc: User Info Lunmask added for LUN %d LUN mask was added for LUN %d. MPX200 Multifunction Router 345 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 346
Info LUN mask was removed for LUN %d. Management port configuration has changed. Router configuration has changed. GE port %d was enabled user. GE port %d was disabled by user. FC port %d was enabled by user. FC port %d was disabled by user. Target at WWPN: xx.xx.xx.xx.xx.xx.xx.xx has been mapped - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 347
%dC. sysTempMon: Critical Tem- 152145 perature, Shutting Down Front: %dC Rear: %dC User Info CPU1: %dC CPU2: %dC Router has reached a critical temperature ad is shutting down, Front: %dC Rear: %dC CPU1: system call from memory monitor initialization routine. MPX200 Multifunction Router 347 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 348
high threshold %d 249862 Temperature is back to normal range %d System Error Failed to kill system task. System Error Router temperature has exceeded the high temperature threshold. System Info Router temperature has returned to the normal operating range. 348 Log messageslog messages - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 349
LUN that is 56868 It cant be used for Off- App Info masked to an Initiator on the router. Mapped line Migration LUNs cannot be used for offline migration jobs. 56869 Read Capacity is not available memory for the source LUN of a Migration job. Source Lun Object MPX200 Multifunction Router 349 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 350
Lun Object QLDM_CreateMigrationOb- 56872 ject: MigrationObject App Info Failed to allocate memory for the Migration job. memory unavailable Start time got from user 56880 %lu Cur Time: %lu Diff: App Info The log displays the configured start time and current time for a delayed migration job - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 351
: 152108 Previous time %ld New User Info Reset the serial schedule delayed time to invalid if the last serial schedule job was removed. time %ld addMigration: Creating 152109 migration Job Failed with User Info Failed to Create a Migration Job. error %d MPX200 Multifunction Router 351 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 352
you will have to remove it from the other route definition first. FcipRoute#%d Add Failed 139938 because relevant FCIP Li- User cence not available Error Router is not licensed for FCIP. Contact your sales representative for information on how to obtain a license. 172040 FcipRoute#%d: Cleaning - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 353
each router and check the Ethernet cabling. Try to Ping the remote router. TCP connection was closed before it was fully opened. Router will restart its listen socket. TCP connection was successfully established with the remote router. Local and Remote FC links are up. MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 354
184542 FcipRoute#%d: VLAN Info Unavailable FCIP Info Route definition includes VLAN, but the network VLAN device instance does not exist. This is an internal error. Try removing and reentering the route definition. 204835 QL3xxx:eth%x PHY Downshift occurred The Ethernet device could not - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 355
used in accordance with the instruction manual, may cause harmful interference to approved by Hewlett-Packard Company may void the user's authority to operate the equipment. Cables number of the product. Laser device All HP systems equipped with a laser device comply MPX200 Multifunction Router 355 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 356
not try to open the laser device enclosure. There are no user-serviceable components inside. • Do not operate controls, make adjustments, or perform label in Figure 124 or equivalent may be located on the surface of the HP supplied laser device. Figure 124 Class 1 laser product label . This optional - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 357
Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. BSMI notice Japanese notice MPX200 Multifunction Router 357 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 358
is a danger of explosion and risk of personal injury if the battery is incorrectly replaced or mistreated. Replacement is to be done by an HP authorized service provider using the HP spare part designated for this product. For more information about battery replacement or proper disposal, contact an - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 359
(12 ft). If you have questions about the type of power cord to use, contact an HP authorized service provider. NOTE: Route power cords so that they will not be walked on and cannot be pinched of waste equipment by users in private households in the European Union MPX200 Multifunction Router 359 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 360
For more information about where you can drop off your waste equipment for recycling, contact your local city office, your household waste disposal service, or the shop where you purchased the product. Dutch notice Verwijdering van afgedankte apparatuur door privé-gebruikers in de Europese Unie Dit - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 361
de recyclage des appareils mis au rebut, veuillez contacter les autorités locales de votre région, les services de collecte des ordures ménagères ou le magasin dans lequel vous avez acheté ce produit. oder im Geschäft, in dem Sie das Gerät erworben haben. Greek notice MPX200 Multifunction Router 361 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 362
Hungarian notice Italian notice Smaltimento delle apparecchiature da parte di privati nel territorio dell'Unione Europea Questo simbolo presente sul prodotto o sulla sua confezione indica che il prodotto non può essere smaltito insieme ai rifiuti domestici. È responsabilità dell'utente smaltire le - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 363
o ambiente e a saúde das pessoas. Para obter mais informações sobre locais que reciclam esse tipo de material, entre em contato com o escritório da HP em sua cidade, com o serviço de coleta de lixo ou com a loja em que o produto foi adquirido. Slovakian notice MPX200 Multifunction Router 363 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 364
Slovenian notice Spanish notice Eliminación de residuos de equipos eléctricos y electrónicos por parte de usuarios particulares en la Unión Europea Este símbolo en el producto o en su envase indica que no debe eliminarse junto con los desperdicios generales de la casa. Es responsabilidad del usuario - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 365
MPX200 CLI To save the configuration using the MPX200 CLI: 1. Log in to the MPX200 using a Telnet session to the management port or the console port: Username: guest Password: password 2. Enter the following command: MPX200> admin start 3. Enter config as the password. MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 366
(Mappings), which restores only the LUN mappings The restored configuration takes effect after the router is rebooted. Restoring the configuration using the MPX200 CLI 1. Establish an FTP connection to the MPX200 management port and log in: Username: ftp Password: ftp 2. Enter the following command - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 367
7. Enter the following command: MPX200 (admin) #> fru restore A list of attributes with formatting and current values will follow. Enter a new value (0=full, 1=mappings only) [full] FRU restore completed. 8. Reboot the system for the configuration to take effect. MPX200 Multifunction Router 367 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 368
368 Saving and restoring the MPX200 configuration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 369
HP StorageWorks MPX200 data migration service. The MPX200 data migration service a storage array. • Multi-pathing software-The LUN may be accessed through HP-UX, Linux, Solaris, and AIX. Typically, the application accesses the data using a mount point. For example: MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 370
F:\Sharepoint. • The Oracle application running on a HP-UX (UNIX) host accesses its data through a migration scenario. 2. Configure the MPX200 for migration. For detailed instructions, see "Using DMS" on , do the following: • Update the multi-pathing software on the server, if necessary. • Adjust the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 371
Storage array Source/ nl destination Firmware nl version Array manage- ment nl software1 Number of control- lers WWPN2 nl (Fibre Channel) 1The storage array- specific software that is used in data server or application and volume is the most important because, in MPX200 Multifunction Router 371 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 372
be helpful while creating new LUNs on a destination array and while presenting source and destination LUNs to MPX200 data migration service. For operating systems other than Windows, HP highly recommends that source and destination LUNs are the same size. NOTE: • You should complete the information - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 373
active optimized paths. To get the best performance, HP highly recommends that LUNs for the source array MPX200 can perform up to 32 active migrations jobs (255 configured) per array. • For migration jobs that run simultaneously, balance the LUNs across two controllers. MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 374
LUNs from the destination array to the server until migration is complete. 4. Based on the order in which LUNs should be migrated, balance the LUNs MPX200. 6. Using the MPX200 user interface, assign appropriate (source/destination) attributes to the storage array. 7. Using the MPX200, create user- - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 375
different from the destination array type, you may need to install the new multi-pathing software associated with the destination array. CAUTION: Do not expose the destination LUNs to a server migration is complete and destination LUNs are presented to the server. MPX200 Multifunction Router 375 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 376
listed in OCFS manual. In addition, HP recommends that MPX200 and to the server. The array management software also provides the controller and WWPN information for the storage array ports. 2World wide port name of the Fibre Channel array; used in performing zoning in Fibre Channel switch firmware - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 377
software for destination array HR-Dept iPortal Sales Windows SP2 10.3.3.1 SUSE 10 HP-UX 11.3 10.4.3.2 10.4.3.3 EMC PowerPath for Windows EMC PowerPath for Linux EMC PowerPath for HP- -2/ vol2 /dev/rdsk/ c0t1d5 nl / dev/rdsk/ c0t1d6 nl / dev/rdsk/ c0t1d7 5, 6, 7 MPX200 Multifunction Router 377 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 378
information FC switch and IP Ad- FC zone name dress Zone members (WWPNs) FC-SW-1 nl 10.5.3.1 Zone-A 21-00-00-C0-DD-C0-8A-D7 nl 21-00-00-C0-DD-C0-55- 50-06-01-61-41-E0-18-94 nl 50-06-01-63-41-E0-18-94 Server, MPX200, storage name HR-Dept: P1 nl iPortal: P1 nl Sales: P1 nl SRC-Array-ABC: P1 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 379
information FC switch and IP Ad- FC zone name dress Zone members (WWPNs) FC-SW-1 nl 10.5.3.1 Zone-A 21-00-00-C0-DD-C0-8A-D7 nl 21-00-00-C0-DD-C0-55 Storage Vendor Array Model LUN Assignment Tool HP MSA2012fc arrays Storage Management Utility user interface MPX200 Multifunction Router 379 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 380
To assign LUNs: 1. Perform zoning as follows: a. Connect the Fibre Channel ports of the data migration appliance to a switch where the storage controller ports are also logged. b. Using switch management tools, create a zone DM_Host_MSA2012, and then add the WWPN of the data migration appliance - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 381
.s. 6. To accept and save the changes, click Update. 7. In the left pane, click VOLUME MANAGEMENT, click volume mapping, and then click map hosts to volume. MPX200 Multifunction Router 381 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 382
the appropriate, planned LUN ID. 10. To accept and save the LUN assignment, click Map it. 11. Refresh the data migration user interface to see if the LUN Storage Vendor Array Model LUN Assignment Tool HP MSA 1000/1500 arrays Storage Navigator Modular user interface To assign LUNs: 1. Perform zoning - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 383
controller appears, as shown in Figure 129. Figure 129 Entering a connection name . 4. Enter DM-Host as the connection name for the data migration appliance WWPN. MPX200 Multifunction Router 383 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 384
planned LUNs, as shown in Figure 131. Figure 131 Selecting LUNs . 7. To accept and save the LUN assignment, click OK. 8. Refresh the data migration user interface to see if the LUN assignment is reflected properly and that the appropriate array entity appears under FC Array. (You may need to click - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 385
Unit, double-click the name of the array to manage. The Array System Viewer window opens. 5. In the left pane, click the Logical Status tab. MPX200 Multifunction Router 385 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 386
6. In the left pane, right-click the port of the array that has been zoned with the data migration appliance, and then click Add New Host Group (see Figure 133). Figure 133 Selecting a port for New Host Group . 7. In the Host Group dialog box, type DM-Host in the Name box, and then click OK. 386 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 387
left pane, click the Options node, and then at the bottom of the right pane, click Simple Setting. 10. Complete the Simple Setting dialog box as follows: a. Next to Platform, select Windows 2003. b. Keep the other settings as default. c. To save the changes, click OK. MPX200 Multifunction Router 387 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 388
11. In the Array System Viewer dialog box, under the DM-Host group, click the WWN node. Then at the bottom of the right pane, click Modify WWN Information (see Figure 135). Figure 135 Array System Viewer . 12. Complete the Modify WWN Information dialog box as follows: a. Under Assignable WWN, click - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 389
and save the LUN assignment, click OK. Figure 136 Modifying mapping . 15. Refresh the data migration user interface to see if the LUN assignment is reflected properly and that the appropriate array entity appears under Storage Manager Client 1e To assign LUNs: MPX200 Multifunction Router 389 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 390
1. Perform zoning as follows: a. Connect the Fibre Channel ports of the data migration appliance to a switch where the storage controller ports are also logged. b. Using switch management tools, create a zone, DM_Host_IBM. c. In this zone, add the WWPN of the data migration appliance Fibre Channel - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 391
dialog box. e. Click Next. f. In the Specify Host Type window (see Figure 139) under Host type (operating system), click Windows 2000/Server 2003 Non-Clustered. MPX200 Multifunction Router 391 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 392
Figure 139 Selecting host operating system . g. Click Next. 6. On the Subsystem Management window, in the left pane's Mapping View page, click either Undefined Mappings or the host group/host that currently has access to the LUNs that need to be part of data migration jobs. 7. Select the LUNs to be - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 393
mapping . 9. Refresh the data migration user interface to see if the LUN assignment is reflected properly and that the appropriate array entity appears under FC Array. (You may need to click the Refresh button several times to correctly reflect the changes.) MPX200 Multifunction Router 393 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 394
Assigning LUNs from an EVA 4/6/8000 series array Storage Vendor Array Model LUN Assignment Tool HP EVA 4/6/8000 series arrays HP Command View EVA user interface To assign LUNs: 1. Perform zoning as follows: a. Connect the Fibre Channel ports of the data migration appliance to a switch where the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 395
Add host button. Figure 142 Adding a host . 6. If you have a multi-path configuration, add the second router port to the DM-Host entity as follows (see Figure 143): a. Under the Hosts tree in the left click the Add port button. Figure 143 Adding a second host port . MPX200 Multifunction Router 395 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 396
, and then click the DM-Host. d. To accept and save the LUN assignment, click Present Vdisk. Figure 144 Presenting Vdisks . 8. Refresh the data migration user interface to see if the LUN assignment is reflected properly and that the appropriate array entity appears under FC Array. (You may need to - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 397
storage array, right-click the array name, and then click Connectivity Status. 4. Select the WWPN associated with the data migration appliance, and then click Register. MPX200 Multifunction Router 397 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 398
5. Complete the Register Initiator Record dialog box as follows (see Figure 146): a. In the Initiator Type box, click CLARIION Open. b. Under Host Information, type the values for Host Name and IP Address. c. Click OK. Figure 146 Registering Initiator Record . 398 Data migration best practices - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 399
OK or Apply. Figure 147 Creating storage group . The new DM-Host storage group is listed under the Storage Groups tree in the main window. MPX200 Multifunction Router 399 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 400
7. Add the DM-Host host entity to the DM-Host storage group entity as follows (see Figure 148): a. Under the Storage Groups node, right-click DM-Host. b. Click Connect Hosts. c. In the DM-Host: Storage Group Properties dialog box, click the Hosts tab. d. On the Hosts page under Available Hosts, - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 401
LUNs to DM-Host . 9. Refresh the data migration user interface to see if the LUN assignment is reflected properly and that the appropriate array entity appears under FC Array. (You may need to click the Refresh button several times to correctly reflect the changes.) MPX200 Multifunction Router 401 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 402
402 Data migration best practices - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 403
, 369 blade command, 265 C chassis diagnostics, 249 checklist examples for data migration, 376 checklists for data migration, 371 clear command, 265 CLI usage, 307 cluster support, Windows, 98 command reference, 263 command syntax, 263 MPX200 Multifunction Router 403 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 404
Linux initiator, 75 device names, assigning, 75 diagnostics chassis, 249 POST, 250 Discovered Targets tab, 71 discovery target device, 327 document related documentation, 259 documentation HP website, 259 downtime, minimizing during data migration, 374 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 405
preparing, 83 HP Command View EVA troubleshooting, 253 I image command, 271 initiator command, 272 initiator object table, 316 initiator setup Linux, 70 VMware, 77 initiators 10 53 Sun Solaris initiator, 54 supported maximums, 49 use of the ports MPX200 Multifunction Router 405 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 406
blade, locating, 251 MPX200 features, 21 MPxIO enabling for HP EVA storage array, 83 multipath devices, monitoring, 276 Red Hat Linux installing and configuring, 73 related documentation, 259 reset command, 277 router blade, 21 S save command, 277 security CHAP, 29 Select Features page, 62 sensor - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 407
iSCSI initiator, 54 iSCSI initiator setup for, 77 VP group notification, 328 VP group table, 320 W websites HP Subscriber's choice for business, 260 product manuals, 259 Windows Cluster support, 98 Windows Server 2003 iSCSI initiator, 55 Scalable Networking Pack, 64 MPX200 Multifunction Router 407 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router User Gui - Page 408
408
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
-
380
-
381
-
382
-
383
-
384
-
385
-
386
-
387
-
388
-
389
-
390
-
391
-
392
-
393
-
394
-
395
-
396
-
397
-
398
-
399
-
400
-
401
-
402
-
403
-
404
-
405
-
406
-
407
-
408
 |
 |
HP StorageWorks
MPX200 Multifunction Router
User Guide
This user guide describes the MPX200 Multifunction Router, which supports the EVA family of Fibre Channel
storage systems for integrated iSCSI connectivity, FCIP, and data migration. The MPX200 hardware is integrated
with up to four EVA storage systems and HP Command View EVA to deliver multi-protocol capabilities, including
Fibre Channel, iSCSI, and FCIP. This document is intended for system administrators with knowledge of HP
StorageWorks EVA4x00/6x00/8x00 storage systems, configuring LUNs using HP Command View EVA, HP
Fibre Channel SANs, Ethernet, TCP/IP networking, iSCSI, and FCIP.
Part number: 5697-0202
Fifth edition: February 2010