HP StorageWorks 6400/8400 HP StorageWorks MPX200 Multifunction Router user gui
HP StorageWorks 6400/8400 - Enterprise Virtual Array Manual
View all HP StorageWorks 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 6400/8400 manual content summary:
- HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 1
HP StorageWorks MPX200 Multifunction Router User Guide This user guide describes the MPX200 Multifunction Router, which supports the EVA family of Fibre Channel storage systems for integrated iSCSI connectivity. The MPX200 hardware is integrated with up to four EVA storage systems and HP Command - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 2
L.P. Confidential computer software. Valid license from HP required for possession, use or copying. HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 3
MPX200 installation 24 Total number of initiators ...24 Number of paths required supported maximums 45 EVA storage system rules and guidelines 46 HP Command View EVA management rules and guidelines 46 EVA storage system software ...47 Features supported for iSCSI hosts 47 Features not supported - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 4
Supported Installing and configuring the SUSE Linux Enterprise 10 iSCSI driver 66 Assigning device names 71 HBA 83 Installing the Microsoft iSCSI initiator services and MPIO 83 Configuring the QLogic iSCSI 87 Installing the HP MPIO Full Featured DSM for EVA 87 Setting up authentication - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 5
and multipath support 113 EVA storage system rules and guidelines 113 Fibre Channel switch and firmware support 113 IP performance ...130 MPX200 ping command 130 Troubleshooting using HP Command View EVA 131 Issues and solutions ...132 HP Command View EVA does not discover MPX200 132 Initiator - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 6
HP Command View EVA issues and solutions 134 7 Support and other resources 137 Intended audience ...137 Related documentation ...137 Contacting HP ...138 HP technical support ...138 Subscription service ...138 Product feedback ...138 Documentation feedback 138 Related information ...138 HP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 7
Set VPGroups ...164 Show ...164 Show CHAP ...166 Show chassis ...167 Show FC ...168 Show fciproutes ...168 Show features ...169 Show initiators ...169 Show initiators LUNmask 169 Show iSCSI ...170 Show iSNS ...171 Show logs ...171 Show LUNinfo ...172 Show LUNs ...172 Show LUNmask ...173 Show memory - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 8
233 Modifications ...233 Cables ...233 Regulatory compliance identification numbers 233 Laser device ...233 Laser safety warning 234 Japanese notice ...235 Korean notices ...236 Safety ...236 Battery replacement notice 236 Taiwan battery recycling notice 237 Power cords ...237 Japanese power cord - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 9
storage arrays 253 Best practices ...254 Migration considerations 254 High availability and redundant configurations 254 Choosing the right DMS options 255 General precautions 255 Installing the MPX200 mpx Manager for Data Migration Services 256 Download the application 256 HP StorageWorks - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 10
license usage in the CLI 295 Command Line Interface ...296 User accounts ...296 User sessions ...296 Admin session ...296 Miguser session ...297 Commands ...297 set system ...299 set features ...300 set fc ...301 set array ...302 set VPGroups ...303 migration_group add 304 migration_group remove - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 11
MSA2012fc array behavior 352 Using array-based licenses for MSA2012fc array 353 Workaround for the use of a single array license for the MSA2012fc 353 Restrictions ...354 Reconfiguring LUNs on a storage array 354 Removing an array after completing data migration jobs 354 Troubleshooting ...354 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 12
blade fabric-attached configuration 22 3 MPX200 single-blade multi-EVA configuration 23 4 MPX200 dual-blade multi-EVA configuration 23 5 MPX200 components 27 6 Chassis rails ...28 tab 53 28 Adding a host ...54 29 Virtual disk properties 55 30 Host details ...55 31 Targets tab ...56 32 Select - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 13
64 41 Selecting the newly added target 65 42 Select status ...65 43 Presented EVA LUNs 66 44 Configure the iSCSI initiator and targets 67 45 Discovered Targets tab local and remote 108 69 HP Continuous Access EVA 3-site configuration with four MPX200 routers 109 MPX200 Multifunction Router 13 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 14
between dissimilar vendor SANs 253 92 Setting array properties: target type 260 93 Setting array bandwidth 261 94 Migration Schedule Options: 271 100 DMS iSCSI host entry in HP Command View EVA 273 101 Virtual disk creation 274 102 DMS virtual disk presentation 275 103 Active Data Migration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 15
Verifying jobs options 288 109 Features page: License Information 290 110 New License Key dialog box 290 111 Add license dialog box 291 112 License Array dialog box 293 113 Information page showing array is licensed 294 114 Data Migration Info 295 MPX200 Multifunction Router 15 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 16
part numbers and options 19 2 MPX200 supported configuration maximums 24 3 Supported MPX200 maximums 46 4 Support for EVA storage system software with MPX200 iSCSI 48 5 Operating system and multipath software support 48 6 Supported single configuration 253 32 Supported storage arrays 253 16 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 17
33 Component requirements 256 34 CLI commands ...297 35 Troubleshooting ...354 MPX200 Multifunction Router 17 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 18
18 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 19
1 MPX200 Multifunction Router overview MPX200 features The Enterprise Virtual Array (EVA) family of Fibre Channel (FC) storage systems is supported for integrated iSCSI connectivity using the MPX200. The MPX200 hardware is integrated with up to four EVA storage systems, for iSCSI connectivity, to - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 20
supplies Up to four EVA storage systems, or order separately to upgrade existing storage systems HP StorageWorks MPX200 10-1GbE Upgrade array using a MPX200 Chassis. HP Storage Works MPX200 Full Chassis 3 Array Data Migration License Includes the license to migrate data from or to a single array - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 21
4 and the SPOCK website at http://www.hp.com/storage/spock for FC switch model support. MPX200 configuration options You can configure an EVA storage system for simultaneous connectivity to iSCSI and FC attached hosts. Support for iSCSI to an EVA is provided through the MPX200 and an existing - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 22
dual-blade configuration may require reconfiguration of device mappings. Figure 2 MPX200 dual-blade fabric-attached configuration . Figure 3 illustrates a multi-EVA configuration with connectivity for up to four EVA storage systems from a single MPX200 blade. 22 MPX200 Multifunction Router overview - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 23
single-blade multi-EVA configuration . Figure 4 illustrates a multi-EVA configuration with connectivity for up to four EVA storage systems from dual MPX200 blades. This configuration provides high availability with failover between blades. Figure 4 MPX200 dual-blade multi-EVA configuration . MPX200 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 24
Simultaneous operation • Total number of initiators • Number of paths required per initiator • Use of Internet Storage Name Service (iSNS) • Use one 10-GbE blade, the supported maximums are the 1-GbE values. 210-GbE ports only 3For iSCSI connectivity Total number of initiators You can configure - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 25
blade (a total of eight). Use of iSNS The MPX200 presents one iSCSI target for each virtual port group (VPG) (a total of four). Each initiator, therefore, discovers four times the number of FC targets. HP recommends that you use iSNS to present to the initiator only the required iSCSI targets. Use - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 26
26 MPX200 Multifunction Router overview - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 27
2 Installing the MPX200 This chapter describes how to rack mount the MPX200. Rack mounting the MPX200 Figure 5 shows the MPX200 components. 1. Rack rail, inner (2) 2. Rack rail, outer (2). 3. Chassis rail (2) 4. Screw, flathead, 6-32 x 1/4 in. (8) Figure 5 MPX200 components . 5. Screw, flathead, - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 28
To rack mount the MPX200: 1. Attach the two chassis rails to the MPX200 chassis using three 10-32 x 1/4 in. screws for each rail. Make sure that the end with the flange is facing the rear of the chassis (Figure 6). The MPX200 has multiple mounting holes to allow for adjustable setback. Secure the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 29
3. Install the rails in the rack. There are two inner rails and two outer rails. Slide each inner rail into the corresponding outer rail to create a complete rack rail. a. Extend the rack rails to fit the inner dimensions of the rack. The rail flanges on both ends fit inside the rack. b. Make sure - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 30
4. Install the chassis in the rack: a. Starting from the back of the rack, slide the MPX200 chassis and rail assembly into the rack rails. b. Fasten the chassis to the rack using two 10-32 x 3/8 in. screws in the middle hole on each rail flange (Figure 9). 1. Screws, panhead, 10-32 x 3/8 in. Figure - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 31
5. Route the power cord: a. Starting from the front of the rack, connect the power cord to the MPX200. b. For the left blade, the cord by following the gap between the chassis and the chassis rail (Figure 10). c. Repeat for the right blade. NOTE: The right blade requires the power cord to extend - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 32
6. Install the HP StorageWorks MPX200 bezel: a. Remove the four 10-32 x 3/8 in. screws that secure the rack rails to the front of the rack. b. Position the bezel support plate in front of the MPX200 chassis, with the arrows pointing up. c. Replace the four 10-32 x 3/8 in. screws, two on each side of - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 33
3 Managing the MPX200 using HP Command View EVA This chapter provides instructions for setting up the MPX200 management port, Fibre Channel zoning, HP Command View EVA discovery, setting up the iSCSI IP ports, and setting the date and time. NOTE: DMS and FCIP functionality are not completely - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 34
of four unique, virtual world wide node names (WWNNs) per physical FC port. To create proper zoning, you must understand the use of VPGs. A VPG consists of a WWNN from each of the four physical FC ports. This allows presentation for up to 1,024 LUNs from a single EVA. Place an EVA target port in - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 35
Figure 13 Fibre Channel zone configuration . HP Command View EVA discovery Once the management port IP address is set and the router FC ports are visible to the EVA, you can perform the MPX200 discovery. You discover the MPX200 iSCSI controllers using the Discover iSCSI Devices button or the Add - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 36
NOTE: HP recommends that you set a static IP address on the management port to ensure connectivity. After the discovery is complete, the MPX200s port's IP address. Figure 16 shows the Management Port tab on the iSCSI Controller Properties page. 36 Managing the MPX200 using HP Command View EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 37
Figure 16 iSCSI controller properties: Mgmt Port tab . Setting up the iSCSI IP ports Each iSCSI IP port must have an IP address-IPv4, IPv6, or both. Set the IP address on the IP Ports tab on the iSCSI Controller Properties page (see Figure 17). NOTE: A target portal is created for each IP address - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 38
Setting the date and time on the MPX200 ensures the synchronization of events and assists in troubleshooting. You have three options for setting the date and time, as shown in Figure 18. NOTE: HP recommends using the Network Time Protocol (NTP) settings, if available on your network. This provides - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 39
Figure 18 Set iSCSI controller time . Code load NOTE: HP recommends that you load the latest MPX200 firmware. Check http://www.hp.com/go/mpx200 for updates. You load the firmware from the Code Load page for the iSCSI controller. Firmware is loaded for the selected controller only; for a dual-blade - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 40
restore the configuration to the point when the configuration was last saved, which is especially important for single-blade configurations. 40 Managing the MPX200 using HP Command View EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 41
NOTE: A Restore action reboots the blade. In a dual-blade configuration, a copy of the configuration for each router is kept on the peer. If you add a new blade, the configuration of the peer blade is copied to the new blade and is ready for use immediately; no reconfiguration is required. To save - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 42
button (Figure 23). Figure 23 Locate hardware device . Removing an iSCSI controller Before you remove an iSCSI controller permanently, ensure that all virtual disk presentations have been removed. To remove an iSCSI controller: 1. Select the desired iSCSI controller. 2. Click the Set Options button - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 43
Figure 24 iSCSI controller options: Remove controller . MPX200 Multifunction Router 43 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 44
44 Managing the MPX200 using HP Command View EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 45
The MPX200 chassis can be configured with one or two blades. Dual-blade configurations provide for high availability with failover between blades, and are supported as redundant pairs only. iSCSI-connected servers can be configured for access to one or both blades. NOTE: In the event of a failover - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 46
chassis for 10 GbE (1 or 2 blades) Total number of iSCSI logical unit numbers (LUNs) 1,024 per chassis 1For mixed-blade chassis HP Command View EVA. For more information and to receive the supported HP Command View EVA version, contact your HP service representative. The HP Command View EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 47
recommends using a confined or secured IP network in the data center. EVA storage system software EVA storage system software supported for Fibre Channel hosts, such as HP StorageWorks Continuous Access, Business Copy, Storage System Scripting Utility (SSSU), and Replication Solutions Manager (RSM - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 48
with MPX200 iSCSI HP StorageWorks product MPX200 iSCSI support HP StorageWorks Business Copy HP StorageWorks Replication Solutions Manager iSCSI and Fibre Channel hosts are supported. SSSU HP StorageWorks Continuous Access EVA HP StorageWorks Continuous Access EVA with HPsupported FCIP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 49
automatically by the HP StorageWorks MPX200 for Enterprise Virtual Array Windows software kit, which is available at http://h18006.www1.h p.com/products/storageworks/evaiscsiconnect/index.html . CAUTION: Using the Registry Editor incorrectly can cause serious problems that may require reinstallation - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 50
for guest OS virtual machines • Multi-initiator access to the same LUN via VMFS • VMware ESX server 3.5 native multipath solution based on NIC teaming iSCSI initiator operating system considerations follow: • Host-mode setting-VMware • Hardware iSCSI initiator (iSCSI HBA)-Not supported 50 MPX200 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 51
Server 2008, 2003, Hyper-V All standard GbE NICs/ASICs and TOE NICs supported by HP for Windows 2008 and 2003 QLogic iSCSI HBAs Microsoft Windows Server 2008 Red Hat Linux, SUSE Linux All standard GbE NICs/ASICs supported by HP for Linux QLogic iSCSI HBAs Sun Solaris All standard GbE NICs/ASICs - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 52
1. Install the HP StorageWorks MPX200 iSCSI kit. a. Start the installer by running Launch.exe. (If you are using presents an option for installing MPIO using the Microsoft generic DSM (Microsoft MPIO Multipathing Support for iSCSI check box). For Windows Server 2008, MPIO is installed separately. 52 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 53
Figure 26 Installation Wizard . c. Click the Microsoft iSCSI initiator icon to open the Control Panel applet. The iSCSI Initiator Properties window opens. d. Select the Discovery tab (Figure 27). Figure 27 iSCSI initiator properties: Discovery tab . e. In the Target Portals section, click Add. A - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 54
HP Command View EVA, set up the iSCSI host and virtual disks. a. Click the EVA storage system icon to start the iSCSI storage presentation. In Figure 28, MPX200-XL is the target EVA d. Create a virtual disk and present it to the host you created in Step 2.c. Note the circled number in the target IQN - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 55
Figure 29 Virtual disk properties . Figure 30 Host details . MPX200 Multifunction Router 55 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 56
to restore this connection when the system boots. • Select the Multipathing check box to enable MPIO. The target status is Connected when logged in. NOTE: HP recommends using the Advanced button to choose the Local Adapter, Source IP, and Target Portal. The Target Portal IP Address is the iSCSI port - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 57
Table 8 lists the supported MPIO options for the MPX200. Table 8 MPIO options for the MPX200 Multipath support Windows Server 2008 HP MPIO Full Featured DSM for EVA (preferred) Supported Microsoft generic DSM Supported Windows Server 2003 Supported Supported MPX200 Multifunction Router 57 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 58
: Microsoft Windows 2008 includes an MPIO feature that must be installed separately. It also includes the iSCSI initiator, which does not require download or installation. To install the MPIO feature for Windows Server 2008: 1. Select the Multipath I/O check box on the Select Features page (Figure - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 59
for iSCSI devices using the MPIO applet (Figure 33 and Figure 34). NOTE: You must present a virtual disk to the initiator to enable the Add support for iSCSI devices check box (see Figure 33). Figure 33 MPIO MPIO Properties page before reboot . Figure 34 MPIO Properties page after reboot . 4. Reboot - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 60
receive packet processing to scale across multiple CPUs. The HP NC3xxx Multifunction Gigabit server adapters use SNP to support TCP off-load functionality. For support details, see the latest HP adapter information at http://h18004.www1.hp.com/products/ servers/networking/index.html. 60 MPX200 iSCSI - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 61
instructions, install the hardware and software for the NC3xxx Multifunction Gigabit server adapter. 2. Download the SNP package from the Microsoft website: http://support Mac OS X (single-path) The EVA4400 and EVA connectivity option supports ATTO Technology's Xtend SAN iSCSI Initiator for Mac OS - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 62
2. Run the Xtend SAN iSCSI application to discover and configure the EVA iSCSI targets. The Xtend SAN iSCSI Initiator can discover targets either by static address or iSNS. For static address discovery: a. Click Discover Targets, and then - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 63
Figure 38 Discovered targets list . NOTE: The mpx iSCSI port may present several iSCSI targets to the Xtend SAN iSCSI Initiator. Select only one target from the list. d. For ISNS discovery Select Initiator and then enter the iSNS name or IP address in the box (Figure 39). Figure 39 iSNS discovery - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 64
e. Test the connection from the initiator to the iSNS server by clicking Verify iSNS. If successful, click Save. If necessary, from the iSNS server, make the appropriate edits to add the Xtend SAN iSCSI Initiator to any iSNS discovery domains that include MPX iSCSI targets. f. Click Discover Targets - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 65
j. Click Save. Figure 41 Selecting the newly added target . k. Click Status, select the network node, and then click Login to connect to the MPX target (Figure 42). The target status is Connected and the target status light turns green. Figure 42 Select status . MPX200 Multifunction Router 65 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 66
: a. Open Disk Utilities from the Apple Mac OS X Finder Applications list. b. Format and partition the EVA LUN, as needed. iSCSI initiator setup for Linux Installing and configuring the SUSE Linux Enterprise 10 iSCSI driver Configure the initiator using the built-in GUI-based tool or the open-iscsi - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 67
: # vi /etc/.iscsi 2. To configure the initiator and targets, start the iSCSI initiator applet (located in the YaST Control Center under Network Services), and then set the initiator to start at boot time (Figure 44). Figure 44 Configure the iSCSI initiator and targets . 3. Select the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 68
4. Log in to the target (Figure 46). Figure 46 Log in to the target . 68 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 69
iscsiadm command to control discovery and connectivity: # iscsiadm -m discovery -t st -p 10.6.0.33:3260 2. Edit the initiator name: # vi /etc/iscsi/initiatorname.iscsi 3. Start the iSCSI service: # service iscsi start MPX200 Multifunction Router 69 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 70
service command: man iscsi.conf 2. Manually start iSCSI services to test your configuration: /etc text following the colon. If there is a problem starting the iscsi daemon, it is usually due from a previous version of an iSCSI driver, HP recommends that you remove the /etc/.iscsi - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 71
NOTE: The Linux driver supports both Red Hat 3 and SUSE 8. See the Readme file an iSCSI target's logical unit. The directory tree under /dev/iscsi contains subdirectories for each iSCSI bus number, each target ID number on the bus, and each LUN for each target. For example, the disk device for bus 0, - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 72
numbers. You can ignore these messages, which occur when Linux is unable to find a driver to associate with a SCSI device node that the iSCSI daemon is opening as part due to network or authentication problems, the iscsi-mountall script of directly mounting SCSI devices, HP recommends that you do one - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 73
HP Command View EVA, as described in Step 2 on page 54. 2. Set up the iSCSI drive on the iSCSI initiator. a. Restart the iSCSI services capability to HP StorageWorks EVA4x00/6x00/8x00 storage arrays. MPxIO allows Fibre Channel and Storage Multipathing Administration Guide, available at http://docs.sun - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 74
-disable="no"; # Enabling MPxIO for an HP EVA storage array This section explains how to configure a Solaris server to recognize an HP storage array in an iSCSI multipath environment with the MPX200. Editing the scsi_vhci.conf file HP storage arrays are supported with MPxIO: • As symmetric devices - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 75
MPxIO support for 3rd party symmetric device need an # entry similar to following in this file. Just replace the "SUN SENA" # part with reboot -- -r Editing the sgen.conf file To ensure that the HP storage arrays are recognized by Solaris as SCSI controllers, you must add information to - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 76
="scsi" target=13 lun=0; name="sgen" class="scsi" target=14 lun=0; name="sgen" class="scsi" target=15 lun=0; Creating an sgen driver alias The HP storage array is a self-identifying SCSI device and must be bound to the sgen driver using an alias. 76 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 77
: # rep sgen /etc/driver_aliases sgen "scsa,08.bfcp" sgen "scsa,08.bvhci" sgen "scsiclass,0c" Enable iSCSI target discovery Solaris supports three iSCSI target discovery methods: • SendTargets • Static • iSNS This section describes SendTargets discovery only. For information on static and iSNS - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 78
:fcgw.mpx200.0834e00028.b2.01.50014380025c4179 Alias: TPGT: 0 ISID: 4000002a0000 Connections: 1 Target: iqn.1986-03.com.hp:fcgw.mpx200.0834e00028.b1.01.50014380025c417d Alias: TPGT: 0 ISID: 4000002a0000 Connections: 1 NOTE: The iSCSI initiator must discover all targets presented by each MPX200 iSCSI - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 79
Length: 8192/65536 Max Connections: 1/Header Digest: NONE/Data Digest: NONE/Configured Sessions: 1 Monitoring the multipath devices After HP Command View EVA has presented the virtual disks to the Solaris host, enter the following commands to monitor the configuration: MPX200 Multifunction Router 79 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 80
should appear under different EVA port targets from the same controller. Example: iscsiadm list target -S Target: iqn.1986-03.com.hp:fcgw.mpx200.0834e00028.b2.01 device path counts. Example: #mpathadm list lu /scsi_vhci/array-controller@g50014380025c4170 Total Path Count: 2 Operational Path Count: - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 81
mpath-support: libmpscsi_vhci.so Vendor: HP Product: hp:fcgw.mpx200.0834e00028. b1.01.50014380025c417d Relative ID: 0 Managing and troubleshooting Solaris iSCSI multipath devices For details on managing and troubleshooting Solaris iSCSI multipath devices, see the Solaris System Administration Guide - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 82
lowest weight. If the path with the lowest weight fails, the path with the next lowest weight is used. • Least Queue Depth. This is not supported by MPIO. 82 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 83
services and Microsoft MPIO. Because the iSCSI driver resides on the QLogic iSCSI HBA, it is not necessary to install the Microsoft iSCSI initiator. Installing the QLogic iSCSI HBA Install the QLogic iSCSI HBA hardware and software following the instructions in the QLogic installation manual - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 84
1. Access the Microsoft iSCSI Initiation Installation page of the Software Update Installation Wizard (Figure 49) Figure 49 Microsoft iSCSI Initiator Installation page . IMPORTANT: Do not select the Software Initiator check box. The QLogic initiator resides on the iSCSI HBA. 2. Reboot the system. - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 85
2. Click Yes to launch the general configuration wizard (Figure 51). Use the wizard to: • Select iSCSI HBA port to configure the QLogic iSCSI HBA. • Configure the HBA Port network settings. • Configure the HBA Port DNS settings (optional). • Configure the SLP Target Discovery settings (optional). • - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 86
Adding targets to the QLogic iSCSI initiator To add HBA port targets: 1. Click the green plus sign (Figure 52). 2. Enter the first iSCSI target port IP address. Figure 52 HBA Port Target Configuration window . 3. Repeat steps 1 and 2 for each MPX200 you want to add. 4. Click Next. 5. To activate the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 87
Use the Microsoft iSCSI initiator services to manage the iSCSI target login and LUN load-balancing policies. Installing the HP MPIO Full Featured DSM for EVA Follow the procedure in the Installation and Reference Guide, available at http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 88
Figure 55 HP MPIO DSM Manager with iSCSI devices . Setting up authentication CHAP is an authentication : Setting up authentication for your iSCSI devices is optional. If you require authentication, HP recommends that you configure it after you have properly verified installation and operation of the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 89
that can be entered. Linux CHAP restrictions The Linux CHAP restrictions follow: • CHAP is supported with the Linux open-iscsi initiator and MPX200. • CHAP setup with Linux iSCSI initiator is not supported with the MPX200. ATTO Macintosh CHAP restrictions The ATTO Macintosh iSCSI initiator does not - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 90
supports two CHAP modes: Once CHAP is enabled, it is enforced for both discovery sessions and normal sessions. You can only choose the CHAP mode: • Single-direction-The target authenticates the identity of the initiator with the user the following: 1. From HP Command View EVA, select Hosts, and then - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 91
iSCSI initiator: 1. Click Discovery. • To discover iSCSI target portals manually: a. Click Add under Target Portals. b. Enter the IP address execute the set chap command, do one of the follow- ing: 1. From HP Command View EVA, select Hosts, and then select the Add Host tab. Enter the IQN string. - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 92
1. Click Discovery. To manually discover iSCSI target portals: a. Click Add under Target Portals. b. Enter normal sessions: discovery.sendtargets.auth.authmethod=CHAP node.session.auth.authmethod=CHAP b. Set up the user name and password for the initiator for a normal session. For example: # To set - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 93
the iscsiadm command to log in to the iSCSI target. For example: [root@sanergy33 iscsi]# iscsiadm --mode node --targetname iqn.1986-03.com.hp:fcgw.mpx200.0840e00002. b1.01.50001fe15006ac39 --login The following is a sample iscsid.conf file for CHAP: CHAP Settings # To enable CHAP authentication - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 94
can be enabled via CLI only). a. If the iSCSI initiator is not listed under the set chap command, do one of the following: • From HP Command View EVA, select Hosts, and then select the Add Host tab. Enter the IQN name string. • From the CLI, use the add command to add the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 95
. c. Click Reset. d. Enter the MPX200 iSCSI Presented Target CHAP secret (for example: hpstorageworks). e. Click Discovery. • To discover iSCSI target portals manually: a. Click Add under Target Portals. b. Enter the IP address of the iSCSI port of the MPX200. c. Click Advanced. d. Select the CHAP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 96
execute the set chap command, do one of the following: • From HP Command View EVA, select Hosts, and then select the Add Host tab. Enter the IQN MPX200 iSCSI port: a. To enable CHAP for the MPX200 iSCSI port using HP Command View: • Select the appropriate iSCSI Controller, then select the IP Ports - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 97
Reset. d. Enter the MPX200 iSCSI Presented Target CHAP secret (for example: hpstorageworks). e. Click OK. f. Click Discovery. • To discover iSCSI target portals manually: a. Click Add under Target Portals. b. Enter the IP address of the iSCSI port of the MPX200. c. Click Advanced. d. Select the CHAP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 98
execute the set chap command, do one of the following: • From HP Command View EVA, select Hosts and then select the Add Host tab. Enter the IQN MPX200 iSCSI port: a. To enable CHAP for the MPX200 iSCSI port using HP Command View: • Select the appropriate iSCSI Controller, then select the IP Ports - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 99
of the screen. c. Click Reset. d. Enter the MPX200 iSCSI Presented Target CHAP secret (for example: hpstorageworks). e. Click OK. f. Click Discovery. • For manually discovering iSCSI target portals: a. Click Add under Target Portals. b. Enter the IP address of the iSCSI port of the MPX200. c. Click - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 100
100 MPX200 iSCSI configuration rules and guidelines - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 101
base configuration can be either a single HP StorageWorks MPX200 Multifunction Router 1-GbE Base Chassis (MPX200), Part Number AP771A or an HP StorageWorks MPX200 Multifunction Router 10-1 GbE Base Chassis (MPX200), Part Number AP773A. Note that FCIP is currently supported only on MPX200 1 GbE ports - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 102
HP StorageWorks MPX200 Router 10-1 GbE Upgrade Blade. Note that FCIP is currently supported to be part of one guide includes samples of FCIP and iSCSI configurations to illustrate some of the many possible configurations available. Despite the number EVA targets that were zoned only with the FCIP FC port - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 103
remaining iSCSI FC port of that blade. Once the targets are rezoned, the impact to iSCSI is the loss of one 1 GbE port. Figure 58 FCIP impact on existing iSCSI configurations - single fabric per blade . Figure 59 FCIP impact on existing iSCSI configurations - dual fabrics per blade . In the dual FC - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 104
iSCSI/FCIP configurations The MPX200 router supports the following configurations: • Figure 60 HP Continuous Access EVA 3-site configuration with six gateways • Figure 71 on page 111 HP Continuous Access EVA 3-site configuration with eight gateways • Figure 72 on page 112 HP Continuous Access EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 105
Figure 61 MPX200 high-availability configuration with one or two long-distance links . Figure 62 MPX200 high-availability configuration with fully-redundant long-distance links . Figure 63 MPX200 configuration with remote IP Distance gateway (mpx110) . MPX200 Multifunction Router 105 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 106
Figure 64 MPX200 highly-redundant configuration with one or two long-distance lists . Figure 65 MPX200 highly redundant pairs of gateways with fully-redundant long-distance links . 106 MPX200 FCIP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 107
Figure 66 MPX200 simultaneous iSCSI and FCIP with remote dedicated FCIP blade . Figure 67 MPX200 simultaneous iSCSI and FCIP, both local and remote . MPX200 Multifunction Router 107 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 108
HP Continuous Access EVA 3-site configurations This section describes the following HP Continuous Access EVA 3-site configurations: • HP Continuous Access EVA 3-site configuration with four MPX200 routers • HP Continuous Access EVA and Site 3 is not supported. The following configuration rules apply - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 109
four MPX200 routers The configuration shown in Figure 69 provides long-distance link redundancy between all three sites. Figure 69 HP Continuous Access EVA 3-site configuration with four MPX200 routers . 3-site configuration with six MPX200 routers The configuration shown in Figure 70 provides the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 110
Figure 70 HP Continuous Access EVA 3-site configuration with six MPX200 routers . 3-site configuration with eight MPX200 routers The configuration shown in Figure 71 provides the highest 3-site redundancy, with a dedicated MPX200 pair for all long-distance links to all three sites. 110 MPX200 FCIP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 111
Figure 71 HP Continuous Access EVA 3-site configuration with eight MPX200 routers . 3-site configuration with six MPX200 routers and full inter-site connectivity Figure 72 provides long-distance link redundancy and full connectivity between all three sites. MPX200 Multifunction Router 111 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 112
, GE2). • The MPX200 Multifunction Router is supported for FCIP extension with HP Continuous Access EVA (see EVA storage system rules and guidelines, page 113). NOTE: For current support, see SPOCK at http://www.hp.com/storage/spock. You must sign up for an HP Passport to enable access. 112 MPX200 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 113
using FCIP with all operating systems and multipath software supported by HP for Continuous Access EVA. For more information, see the HP StorageWorks SAN design reference guide, available at http://www.hp.com/go/SDGManuals. EVA storage system rules and guidelines • The MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 114
-way, or 200 ms round-trip for HP Continuous Access EVA. HP requires dedicated IP bandwidth (see Table 14). • For MPX200 IP management-LAN and WAN are supported. Table 14 Network requirements for the MPX200 with XCS and VCS Specification Bandwidth1 Maximum number of DR groups MTU of the IP network - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 115
2 Gb/s with a maximum frame size of 2,148 bytes. It supports Ethernet service at transmission rates of 1,000 or 100 Mb/s with an MTU for each of the two FCIP routes, in a configuration. HP StorageWorks Continuous Access EVA replication solution requires dedicated bandwidth for the intersite link. If - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 116
allow the encryption box add the bytes and keep the MTU size under 1500 bytes. NOTE: Jumbo frames are not supported for use with HP Continuous Access EVA Continuous Access. Compression The MPX200 integrates a software compression option. Enable compression for IP fabrics with an RTT greater than or - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 117
). For higher-loss, longer-latency networks, you should reduce the recommended window size and scaling factor by one setting to compensate for the increased number of packet retransmissions. Table 16 T1/DS-1 1.554 Mb/Sec (Bandwidth = 1 Mb) Round trip time (RTT) in ms Window size (bytes) 250 64K - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 118
15 128K 2 10 64K 1 5 32K 0 2.5 32K 0 1 or less 32K 0 Table 18 OC-1 50 Mb/Sec (Bandwidth = 50 Mb) Round trip time (RTT) in ms Window size (bytes) 250 2M 100 512K 50 256K 25 128K 20 128K 15 128K 10 64K 5 32K 2.5 32K 1 or less 32K Scaling factor (2n) 6 4 3 2 2 2 1 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 119
1 or less 64K 1 Table 20 DS-5 400 Mb/Sec (Bandwidth = 384 Mb) Round trip time (RTT) in ms Window size (bytes) 250 4M 100 2M 50 1M 25 512K 20 512K 15 256K 10 256K 5 128K 2.5 64K 1 or less 32K Scaling factor (2n) 7 6 5 4 4 3 3 2 1 0 Table 21 OC-12 621 Mb/Sec (Bandwidth = 699 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 120
MPX200 Multifunction Router 1-GbE Base Chassis or HP StorageWorks MPX200 Multifunction Router 10-1 GbE Base Chassis. Note that FCIP is currently supported only on MPX200 1 GbE ports. • HP Storage Works MPX200 Half Chassis FCIP License • Continuous Access EVA • EVA3000/5000 or EVA4x00/6x00/8x00 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 121
port • FCIP Link Parameters; Guaranteed Bandwidth, Round-Trip-Time, Quality Of Service, VLAN/Priority Step 3. Rack-mount the MPX200 See the "Rack mounting time, your workstation IP address must be "10.0.0.x," where x is a number other than 1 and the subnet mask is 255.0.0.0. 1. Connect the MPX200 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 122
LEDs on the MPX200. Input fault LED System power LED Heartbeat LED HP StorageWorks MPX200 1 GbE iSCSI ports GE4 GE3 1 GbE Blade MPX200 Multifunction where n is the number of the blade currently selected in the chassis. 7. Enter the default password config. NOTE: HP recommends that you change - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 123
8. Enter the command set mgmt to set the initial parameters. Follow the on-screen prompts to configure the management port (or press Enter to accept the default settings, as shown in Figure 74): Figure 74 Setting IP addresses . The management port is now configured with the appropriate IP address - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 124
the recommended setting documented in this guide for the actual bandwidth and RTT or a guaranteed WAN bandwidth - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 125
GE ports without an IP switch. Step 9. Verify FCIP links and firmware version 1. To determine whether a firmware upgrade is necessary, visit the SPOCK website at http:// www.hp.com/storage/spock. You must sign up for an HP Passport to enable access. Upgrade accordingly. 2. Use the CLI ping command - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 126
126 MPX200 FCIP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 127
This chapter describes MPX200 chassis diagnostics and provides information to help you troubleshoot problems. Diagnostic information is also available through diagnostics, HP Command View EVA, and the CLI event logs and error messages. MPX200 chassis diagnostics Chassis diagnostics are - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 128
LED is illuminated when a fault exists in the MPX200 firmware or hardware. If the System Fault LED is illuminated -test (POST) diagnostics The MPX200 performs a series of tests as part of its power-on procedure. The POST diagnostic program performs the following . 128 Diagnostics and troubleshooting - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 129
Management port IP address conflict blink pattern An IP address conflict on the management port is indicated by a four-blink pattern (Figure 80). Figure 80 Management port IP address conflict blink pattern . Using the CLI or GUI, the IP address conflict blink pattern may be cleared using the Beacon - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 130
OFF buttons to control the blue LED (Figure 83). Figure 83 Using HP Command View EVA to locate a hardware device . MPX200 log data The MPX200 maintains ping command is the most basic network troubleshooting tool that is available to troubleshoot FCIP route problems. This command runs a diagnostic in - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 131
Figure 84 FCIP route ping command . Troubleshooting using HP Command View EVA You can use HP Command View EVA to display the properties for each iSCSI controller. At a glance, you can check each controller's serial number, temperature, and power/cooling status (Figure 85). Figure 85 iSCSI controller - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 132
in the HP Command View EVA discovery screen. EVA-assigned LUNs do not appear on initiator Solution 1: The initiator must log in to the target to which the EVA LUN was assigned. Solution 2: The EVA LUN was assigned to a different iSCSI host than was expected. 132 Diagnostics and troubleshooting - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 133
EVA-presented virtual disk not seen by initiator Solution: The initiator must log in to the appropriate iSCSI target. Match the virtual disk presentation properties to the initiator's target login (Figure 87 and Figure 88). Figure 87 Virtual disk properties: Host details . Figure 88 iSCSI initiator - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 134
online. Check all MPX200 FC connections to the EVA. Cannot change iSCSI controller IP port attributes. Enable the iSCSI controller IP port. Command not supported with this version of the iSCSI controller. Check the firmware version and update if necessary. 134 Diagnostics and troubleshooting - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 135
file extension. Ensure that the correct file is being used to restore the configuration. Operation failed. iSCSI controller code load file cannot The firmware file may be invalid or corrupt. Obtain open/read. another copy of the file. The iSCSI controller code load process has failed. The - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 136
136 Diagnostics and troubleshooting - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 137
View EVA user guide • HP StorageWorks Interactive Help for HP Command View EVA • HP StorageWorks Enterprise Virtual Array user guide for your array • HP StorageWorks SAN design reference guide You can also find the documents referenced in this guide on the Manuals page of the HP Business Support - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 138
of product enhancements, new driver versions, firmware updates, and other product resources. Product feedback To make comments and suggestions about HP StorageWorks Command View EVA, please send a message to: [email protected]. Documentation feedback HP welcomes your feedback. To make comments and - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 139
Partner Locator: http://www.hp.com/service_locator • HP Software Downloads: http://www.hp.com/support/downloads • HP Software Depot: http://h20293.www2.hp.com • HP Single Point of Connectivity Knowledge (SPOCK) http://www.software.hp.com • HP StorageWorks SAN manuals: http://www.hp.com/go/sdgmanuals - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 140
. • Extend only one rack component at a time. Racks can become unstable if more than one component is extended. Product warranties For information about HP StorageWorks product warranties, see the warranty information website: http://www.hp.com/go/storagewarranty 140 Support and other resources - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 141
A Command reference This chapter lists and describes the MPX200 CLI commands in alphabetical order. Each command description includes syntax, keywords, notes, and examples. Command syntax The MPX200 CLI command syntax uses the following format: command keyword keyword [value] keyword [value1] [ - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 142
reset commands also end an Admin session. cancel Terminates an Admin session opened by another user. Use this keyword with care because it terminates the Admin session without warning the other user and without saving pending changes. NOTE: Closing a Telnet window during an Admin session does not - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 143
is valid only at the chassis CLI prompt. The chassis CLI prompt does not include the blade number (for example, MPX200 #>), whereas the blade CLI prompt includes the blade number (for example, MPX200 #>). Authority Syntax None blade [1 or 2] Example: The following example shows blade 2 being - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 144
the blade management level, exit returns you to the chassis management level. The following example shows the exit command for the blade: MPX200 (admin) #> exit HP StorageWorks MPX200 #> 144 Command referencecommand reference - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 145
Fciproute Configures a new FCIP route or modifies or deletes an existing FCIP route. Each FCIP route requires a dedicated FC and Gigabit Ethernet (GbE) port. Configuring an FCIP route and specifying an FC and GE port pair take precedence over any previous configuration for the port pair (FC/GE). - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 146
WARNING: The following command might cause a loss of connections to both GE ports. Route ----1 2 FC Port ID ---------FC1 FC2 GE Port ID ---------GE1 GE2 Please select a FCIP route from the list above ('q' to quit): 1 Configuring FCIP Route FCIP Interfaces FC & GE (0=Enable, 1=Disable) IP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 147
FRU Saves and restores the router's configuration. Authority Syntax Keywords Admin session to restore restore FRU save restore The fru restore command requires that you first FTP the tar file containing the configuration to the router. When you issue this command, the system prompts you to - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 148
logout quit show [chassis] Example 2: The following example shows the help command for the blade: MPX200 #> help admin [begin | end | start | stop | cancel] beacon [ on | off ] date [MMDDhhmmCCYY] clear [logs | stats] exit fru [restore | save] help history image [cleanup | list | unpack] image - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 149
shutdown target [rm] traceroute History Displays a numbered list of the previously entered commands. Authority user when updat- ing the router's firmware image. list Displays a list of the firmware image files in the router's / [file] var/ftp directory. unpack [file] Unpacks the firmware - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 150
MPX200 (admin) #> image cleanup Example 2: MPX200 (admin) #> image list Image Location Image File Blade 1 (local) isr-6200-3_0_0_5.bin Example 3: MPX200 (admin) #> image unpack HP_StorageWorks_MPX200-2_0_0_1.bin Unpack Completed. Please reboot the system for FW to take effect. MPX200 ( - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 151
'Q' and the ENTER key to do so. OS Type (0=MS Windows, 1=Linux, 2=Other) [MS Windows ] All attribute values that have been changed will now be saved. Example 3: MPX200 (admin) #> initiator remove Index Status (WWNN,WWPN/iSCSI Name 0 LoggedOut test 1 LoggedOut iqn.1991-05.com.microsoft:server1 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 152
2 20:00:00:20:37:fd:9c:f7,22:00:00:20:37:fd:9c:f7 3 20:00:00:20:37:fd:8d:00,22:00:00:20:37:fd:8d:00 Please select a Target from the list above ('q' to quit): 0 LUN WWULN Vendor 0 20:00:00:20:37:fd:8b:ab:00:00:00:00:fc:b7:3f:fa SEAGATE Please select a LUN to present to the initiator ('q' to quit): 0 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 153
MPX200 (admin) #> lunmask remove Index (WWNN,WWPN/iSCSI Name 0 50:06:01:60:c1:e0:0d:a2,50:06:01:60:41:e0:0d:a2 1 50:06:01:60:c1:e0:0d:a2,50:06:01:68:41:e0:0d:a2 Please select a Target from the list above ('q' to quit): 0 Index (LUN/VpGroup) Vendor 0 0/VPGROUP_1 DGC 1 1/VPGROUP_1 DGC 2 2/ - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 154
the chassis management level. The following example shows the quit command for the blade: MPX200 (admin) #> quit HP StorageWorks MPX200 #> Reboot Restarts the blade firmware. Authority Syntax Admin session reboot Example: MPX200 (admin) #> reboot Are you sure you want to reboot the System - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 155
Reset Restores the router configuration parameters to the factory default values. The reset factory command deletes all LUN mappings, as well as all persistent data for targets, LUNs, initiators, VPG settings, log files, iSCSI and management IP addresses, FC and Ethernet port statistics, and - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 156
Set traces The save traces command creates a tar file that contains the router's dump data, storing the file in the router's /var/ftp directory. When the command has finished executing, you must FTP the trace's tar file from the blade. The system notifies you if the router does not have any dump - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 157
See "set iSCSI command" on page 160. Sets the Internet Simple Name Service (iSNS) parameters. See "set iSNS command" on page 160. Sets the management .com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9 1 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9 2 iqn.1986-03.com.hp:fcgw.mpx200 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 158
key to do so. Index iSCSI Name 0 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.0 1 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.1 2 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9 3 iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9 4 iqn.1986-03.com - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 159
FC port. Authority Syntax Keywords Admin session set fc [] [] The number of the FC port to be configured. Example: MPX200 (admin) #> set fc is not currently supported. It will be supported in a future release. Authority Admin session MPX200 Multifunction Router 159 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 160
Syntax set features Set iSCSI Configures an iSCSI port. Authority Syntax Keywords Admin session set iscsi [] [] The number of the iSCSI port to be configured. Example: MPX200 (admin) #> set iscsi 1 A list of attributes with formatting and current values will follow. - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 161
Enable, 1=Disable) [Enabled] IPv4 Mode (0=Static, 1=DHCP, 2=Bootp, 3=Rarp) [Dhcp ] IPv6 Interface (0=Enable, 1=Disable) [Enabled] IPv6 Mode (0=Manual, 1=AutoConfigure) [Manual ] 1 All attribute values that have been changed will now be saved. Example 2: The following example shows how to use the set - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 162
press 'q' or 'Q' and the ENTER key to do so. CLI Inactivity Timer (0=Disable, 1=15min, 2=60min) [15min ] CLI Prompt (Max=32 Characters) [HP StorageWorks MPX200 ] All attribute values that have been changed will now be saved. Set SNMP Configures general SNMP) properties and eight trap destinations - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 163
end of the list press 'q' or 'Q' and the ENTER key to do so. WARNING: If enabled by operator, the Symbolic Name can be embedded as part of the iSCSI Name. Changes to the iSCSI name will be effective after a reboot. Only valid iSCSI name characters will be accepted. Valid characters include - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 164
), 1=SAN over WAN, 2=iSCSI Server Connectivity/SAN over WAN, 3=Data Migration) [iSCSI Connectivity] Target Presentation Mode (0=Auto, 1=Manual) [Auto ] Lun Mapping (0=Enable, 1=Disable) [Disabled ] Controller Lun AutoMap (0=Enable, 1=Disable) [Enabled ] Target Access Control (0=Enable, 1=Disable - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 165
Syntax show chap chassis fc [port_num] fciproutes [] Keywords features initiators [fc or iscsi] initiators_lunmask iscsi [port_num] isns [port_num] logs [last_x_entries] chap chassis fc [port_num] features initiators [fc or iscsi] initiators_lunmask iscsi [port_num] isns [port_num - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 166
the router's FC and iSCSI statistics. See "show stats command" on page 178. system Displays router product information, including the serial number, software version, hardware version, configuration, and temperature. See "show system command" on page 180. targets [fc or iscsi] Displays the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 167
Installed Power Source Connected Fan1/Fan2/Fan3 Healthy/Healthy/Healthy Blade 2 Information (Right Slot Status Online Product Name HP StorageWorks MPX200 Symbolic Name Blade-2 Serial Number 0836E00018 HW Version 20694-03 A SW Version 3.0.1.2 Temp (Front/Rear/CPU1/CPU2) 46C/34C/38C/38C Power Cooling - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 168
all ports. Authority Syntax Keywords None show fc [port_num] [port_num] Identifies the number of the FC port. Example: MPX200 #> show fc 2 FC Port Information FC WWPN 21:00:00:c0:dd:0c:8b:ef Port ID 00-00-ef Firmware Revision No. 3.03.07 Frame Size 2048 Execution Throttle 64 Connection Mode - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 169
TCP Window Size Window Scaling Window Scaling Factor TCP Port No Current GE Port Speed Programmed GE Port Speed Bandwidth, Mbit/sec VLAN FCIP SW Compression MPX200 (admin) #> 32768 Enabled 2 3225 100Mb/FDX Auto 1000 Disabled Disabled Show features Displays any licensed features. Authority - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 170
ports. Authority Syntax Keywords None show iscsi [port_num] [port_num] The number of the iSCSI port. Example: MPX200 (admin) #> show iscsi iSCSI Enabled Link Status Up iSCSI Name iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.0 Firmware Revision 3.00.01.57 Current Port Speed 1Gb/FDX - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 171
Authority Syntax Keywords None show isns [port_num] [port_num] The number of the iSCSI port. Example: MPX200 (admin) #> show last 10 entries in the router event log. The show logs command (without a number) displays the entire router event log. Example: MPX200 #> show logs 01/01/2008 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 172
Please select a LUN from the list above ('q' to quit): 1 LUN Information WWULN 50:00:1f:e1:50:07:0c:e0 LUN Number 0 VendorId HP ProductId HSV210 ProdRevLevel 5000 Portal 1 Lun Size 0 MB Lun State Online Show LUNs Displays LUN information for each target. Authority Syntax None - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 173
VPGROUP_2 2 VPGROUP_2 3 Show LUNmask Displays all initiators mapped to the specified LUN. Authority Syntax None show lunmask Example: MPX200 #> show lunmask Index ----0 1 (WWNN,WWPN/iSCSI Name 50:00:1f:e1:50:07:0c:e0,50:00:1f:e1:50:07:0c:e9 50:00:1f:e1:50:07:0c:e0,50:00:1f:e1:50:07:0c: - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 174
MPX200 #> show memory Memory Units Free/Total Physical 415MB/1002MB Buffer Pool 6866/8960 Nic Buffer Pool 0/0 Process Blocks 8192/8192 Request Blocks 8192/8192 Event Blocks 2048/2048 Control Blocks 2048/2048 Sessions 2048/2048 Connections: GE1 256/256 GE2 256/256 GE3 256/256 GE4 256/256 Show - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 175
is only displayed for port(s) that are not associated with any configured FCIP routes. Port Number -----GE1 GE2 FC1 FC2 Bytes/s (init_r) -------0 0 0 0 Bytes/s (init_w) -------- 0 0 0 0 Bytes/s (tgt_r) -------- 0 0 0 0 Bytes/s (tgt_w) -------- 0 0 0 0 Bytes/s (total) -------- 0 0 0 0 Example - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 176
presented_targets iscsi Presented Target Information iSCSI Presented Targets Name iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9 Alias WWNN 50:00: 50:00:1f:e1:50:07:0c:e9 Name iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9 Alias WWNN 50:00: - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 177
50:07:0c:e0 WWPN 50:00:1f:e1:50:07:0c:e9 Name iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070cec Alias WWNN 50:00:1f:e1:50:07: 0c:e0 WWPN 50:00:1f:e1:50:07:0c:ec Name iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070cec Alias WWNN 50:00:1f:e1:50:07: - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 178
Read Community Public Trap Community Private System Location System Contact Authentication traps Disabled System OID 1.3.6.1.4.1.3873.1.5 System Description HP StorageWorks MPX200 Trap Destination 1 IP Address 10.0.0.5 Trap Port 1024 Trap Version 2 Show stats Displays the blade statistics for - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 179
MAC Rcvd Unknown Control Frames 0 MAC Rcvd Pause Frames 0 MAC Rcvd Control Frames 0 MAC Rcvd Dribbles 0 MAC Rcvd Frame Length Errors 0 MAC Rcvd Jabbers 0 MAC Rcvd Carrier Sense Errors 0 MAC Rcvd Dropped Frames 0 MAC Rcvd CRC Errors 0 MAC Rcvd Encoding Errors 0 MAC Rcvd Length Errors Large 1 MAC Rcvd - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 180
Name Symbolic Name System Mode Controller Lun AutoMap Target Access Control Serial Number HW Version SW Version Boot Loader Version No. of FC Ports No. of iSCSI Ports Telnet SSH Temp (Front/Rear/CPU1/CPU2) HP StorageWorks MPX200 Blade-1 iSCSI Server Connectivity Enabled Disabled 0851E0014 20694-03 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 181
found. Show VPGroups Displays information about the blade's configured VPGs. Authority Syntax Keywords None show vpgroups vp index [vp index] The number (1-4) of the VPG to be displayed. Example 1: The following example shows the show vpgroups command for a specific VPG: MPX200 #> show - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 182
MPX200 #> show vpgroups VpGroup Information Index 1 VpGroup Name VPGROUP_1 Status Enabled WWPNs 21:00:00:c0:dd:13:16:44 21:00:00:c0:dd:13:16:45 Index VpGroup Name Status WWPNs 2 VPGROUP_2 Enabled 21:01:00:c0:dd:13:16:44 21:01:00:c0:dd:13:16:45 Index VpGroup Name Status WWPNs 3 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 183
MPX200 (admin) #> target rm Index State (WWNN,WWPN/iSCSI Name 0 Offline 20:00:00:14:c3:3d:d2:bf,22:00:00:14:c3:3d:d2:bf 1 Online 20:00:00:14:c3:44:9b:86,22:00:00:14:c3:44:9b:86 2 Online 20:00:00:14:c3:44:9b:9d,22:00:00:14:c3:44:9b:9d 3 Online 20:00:00:14:c3:44:9a:fa,22:00:00:14:c3:44:9a:fa - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 184
184 Command referencecommand reference - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 185
B Command Line Interface usage The CLI enables you to perform a variety of MPX200 management tasks through an Ethernet or serial port connection. Logging on to an MPX200 You can use either Telnet or Secure Shell (SSH) to log on to a router, or you can log on to the switch through the serial port. To - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 186
0834E00019 HW Version 20697-03 A Fan Speed Normal Blade 1 Information (Left Slot Status Online Product Name HP StorageWorks MPX200 Symbolic Name Blade-1 Serial Number 0834E00008 HW Version 20694-03 A SW Version 3.0.1.0rc2a Temp (Front/Rear/CPU1/CPU2) 44C/33C/34C/38C Power Cooling Module 1 Status - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 187
to get the saved router configuration data: c:\> ftp 172.17.137.102 Connected to 172.17.137.102. 220 (none) FTP server (GNU inetutils 1.4.2) ready. User (172.17.137.102:(none)): ftp 331 Guest login ok, type your name as password. Password: ftp 230 Guest login ok, access restrictions apply. ftp - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 188
to 172.17.137.102. 220 (none) FTP server (GNU inetutils 1.4.2) ready. User (172.17.137.102:(none)): ftp 331 Guest login ok, type your name as to I. ftp> put HP StorageWorks MPX200_FRU.bin 200 PORT command successful. 150 Opening BINARY mode data connection for 'HP StorageWorks MPX200_FRU.bin'. 226 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 189
managing the router through third-party applications that support SNMP. The router firmware supports SNMP versions 1 and 2 and a QLogic same. The trap community password can be up to 32 characters, excluding the number sign (#), semicolon (;), and comma (,). The default password is private. System - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 190
. Trap address* Specifies the IP address to which the SNMP traps are sent. A maximum of eight trap addresses are supported. The default address for traps is 0.0.0.0. Trap port* Port number on which the trap is sent. The default is 162. If the trap destination is not enabled, this value is - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 191
qsrNwPortRole qsrNwPortIndex qsrNwPortAddressMode qsrIPAddressType qsrIPAddress qsrNetMask qsrGateway qsrMacAddress qsrNwLinkStatus qsrNwLinkRate qsrNwPortRole Syntax Access Description qsrNwPortIndex Syntax Access Description qsrNwPortAddressMode Syntax Access Description qsrIPAddressType Syntax - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 192
qsrIPAddress Syntax Access Description qsrNetMask Syntax Access Description qsrGateway Syntax Access Description qsrMacAddress Syntax Access Description qstNwLinkStatus Syntax Access Description qsrNwLinkRate Syntax Access Description InetAddress Read-only IP address of the port. InetAddress Read- - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 193
qsrFcPortTable Syntax Access Description SEQUENCE OF QsrFcPortEntry Not accessible A list of the FC ports on the router. The table contains as many entries as there are FC ports on the router. qsrFcPortEntry Syntax Access Description QsrFcPortEntry Not accessible Each entry (row) contains - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 194
Description qsrFcPortWwn Syntax Access Description qsrFcPortId Syntax Access Description qsrFcPortType Syntax Access Description qsrFcLinkStatus Syntax Access Description qsrFcLinkRate Syntax Access Description World Wide Name of the node that contains this port. PhysAddress Read-only World Wide - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 195
Access Description Not accessible Entries in this table contain Information about initiators. qsrIsInitEntry Syntax Access Description QsrIsInitEntry Not accessible Each entry (row) contains information about a specific iSCSI initiator. An iSCSI initiator information entry consists of the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 196
qsrIsInitAddressType Syntax Access Description qsrIsInitAddress Syntax Access Description qsrIsInitStatus Syntax Access Description qsrIsInitOsType Syntax Access Description qsrIsInitChapEnabled Syntax Access Description InetAddressType Read-only Type of iSCSI initiator's IP address (IPv4 or IPv6). - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 197
Access Description Not accessible A list of the LUNs on the FC targets discovered by the router. There are as many entries in this table as there are FC targets on the router. qsrLunEntry Syntax Access Description QsrLunEntry Not accessible Each entry (row) contains information about a specific - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 198
qsrLunProdRevLevel Syntax Access Description qsrLunSize Syntax Access Description qsrLunState Syntax Access Description qsrLunVPGroupid Syntax Access Description qsrLunVPGroupname Syntax Access Description SnmpAdminString Read-only Product revision level for the LUN Unsigned32 Read-only Size of the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 199
group ID. qsrVPGroupName Syntax Access Description SnmpAdminString Read-only VP group name or host group name. qsrVPGroupWWNN Syntax Access Description VpGroupWwnnAndWwpn Read-only Worldwide port number (WWPN) MPX200 Multifunction Router 199 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 200
qsrVPGroupStatus Syntax Access Description Integer: 0 = enabled; 1 = disabled Read-only Maintain the status of the VP group (enabled/disabled) 200 Simple Network Management Protocol setup - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 201
Sensor table The sensor table lists all the sensors on the router. Each table row specifies a single sensor. qsrSensorTable Syntax Access Description SEQUENCE OF QsrSensorEntry Not accessible List of all the sensors on the router. The table contains as many entries (rows) as there are sensors. - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 202
qsrSensorUnits Syntax Access Description qsrSensorValue Syntax Access Description qsrUpperThreshold Syntax Access Description qsrLowerThreshold Syntax Access Description qsrSensorState Syntax Access Description INTEGER Celsius = 1 Read-only Unit of measurement for the sensor. Integer32 Read-only - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 203
. qsrHwVersion Syntax Access Description SnmpAdminString Read-only System hardware version number. qsrSwVersion Syntax Access Description SnmpAdminString Read-only System software (firmware) version number. qsrNoOfFcPorts Syntax Access Description Unsigned32 Read-only Quantity of FC ports - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 204
Syntax Access Description SnmpAdminString Read-only Version number of the agent software on the system. Notification objects This section defines the objects used in notifications. qsrEventSeverity Syntax Access Description INTEGER Accessible for notify - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 205
qsrEventTimeStamp • qsrEventSeverity Network notifications are sent for the following events: • Management port: down or up • iSCSI port: down or up • Port number (1-4) FC port down notification The FC port down notification indicates that the specified FC port is down. The next time the port comes - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 206
Target presentation notifications are sent for the following event: • Target Presentation • State: Presented (mapped) or unpresented (unmapped) • Target name • Blade number (1 or 2) VP group notification The VP group notification indicates that the specified VP group is enabled or disabled. It also - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 207
of 4) • iSNS configuration change • Blade number (1 or 2) • NTP configuration change • Blade number (1 or 2) • Router configuration change • Blade number (1 or 2) • Management port configuration change • Blade number (1 or 2) • Firmware upgrade complete • Blade number (1 or 2) • Reboot blade MPX200 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 208
• Blade number (1 or 2) 208 Simple Network Management Protocol setup - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 209
follows: • The ID column specifies the message identification numbers in ascending order. • The Log Message column indicates the = iSCSI driver • System = System module • TOE = TCP/IP offload engine module • User = User module (iSCSI, FCIP, or DMS) • The Msg. Type column specifies the log message - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 210
request for the data segment. QLKV_ValidateLoginTrans41238 itCsgNsgVersion failed App (status 0x%x) Error iSCSI login failed due to unsupported version number in received login PDU. QLIS_LoginPduContinue: iSCSI login PDU contains invalid initiator 41257 Invalid initiator name. App Error name - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 211
0 = FC, 1 = iSCSIPortId: 0 = FC1 or iSCSI1(GE1), 1 = FC2 or iSCSI2 (GE2) Error Inquiry command failed. The Inquiry command was issued by the router as part of its discovery process. Error Pass-Through command for Inquiry command for page 83 failed. The Inquiry command was issued by the router as - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 212
tion (0x%x) not supported App in this mode was issued by the router as part of its discovery process. QLBI_GetLunList: open App connection Error Login attempted using FC virtual port (VP) index that is out-of (unrecoverable firmware error). number (CmdSN). Command PDU will - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 213
(%d) of App allowed hosts already logged in Error iSCSI session login rejected because the maximum number of allowed hosts are already logged in. QLIS_InstantiateSession: 42404 Maximum number (%d) of allowed hosts already App logged in 42648 QLIS_HandleTeb: Driver App Fatal Error Error - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 214
xx xx xx. 54359 QLFC_Logout: Port Name %.2x%.2x%.2x%.2x%.2x%.2x%.2x%.2x App Info FC login event notification, VP (virtual port) xx. QLIS_OpenConnectionNoti- 54683 fication: Target connection opened (Port %d, DDB App Info iSCSI target connection opened for port %d, data description block - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 215
: QLStartAdapter failed iSCSI Fatal Start iSCSI processor failed. 70417 #%d: QLInitializeAdapter: iSCSI Fatal iSCSI processor firmware initialization failed. QLInitializeFW failed 70432 #%d: QLDoInterruptServiceRoutine: PortFatal interrupt. PortFatalErrorStatus %08x CSR %08x AS %x AF - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 216
reported that an SNS response had an invalid handle. 73990 #%d: QLUtmIoctlEnable: Initialize FW failed iSCSI Error iSCSI processor failed firmware initialization. #%d: QLRunDiag: MBOX Diag 74056 test internal loopback iSCSI failed %x %x Error iSCSI processor failed the internal loopback test - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 217
Driver failed to receive a heartbeat from the iSCSI processor for the specified number of seconds. #%d: QLReadyTimer: Ad74659 apter missed heartbeat for 0x%x seconds iSCSI 04x %04x %04x %04x iSCSI Error iSCSI processor rejected the firmware initialize command. MPX200 Multifunction Router 217 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 218
to return diagnostic results. 102656 #%d: QLInitializeAdapter: FC Reset ISP failed Fatal FC processor failed reset. 102657 #%d: QLInitializeAdapter: Load RISC code failed FC Fatal FC processor firmware load failed. 218 Log messageslog messages - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 219
run out of resources to execute additional commands. Error FC processor was disabled by an IOCTL request to the driver. Error FC processor firmware failed initialization. The request to initialize was received by the driver in an IOCTL request. Error FC processor failed the external loopback - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 220
of errors encountered. The link has been taken down. Error FC processor was unable to obtain the number of loop IDs required. This failure occurs only when the FC processor is running multi-ID firmware. Error Driver was unable to re-establish connection to the target within the timeout and retry - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 221
Get VP Database command (for virtual port %d). #%d: QLGetVpDatabase: 108033 Firmware State failed 0- FC 3 %x %x %x %x Error FC controller reported failure status for a Get Firmware 2, and 3 registers. 139265 QBRPC_Initialize: Entered User Error RPC (remote procedure call) server initialization - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 222
Failed memory allocation for Get FC SFP API. 139281 QBRPC_Initialize:GetLog Mem Allocation error User Error Failed memory allocation for Get Log API. 139282 QBRPC_Initialize:GetStats User Error Failed memory allocation for Get Statistics API. Mem Allocation error 139283 QBRPC_Initialize - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 223
port. 151842 FW Upgrade performed: new version is: %d.%d.%d.%d User Info A firmware upgrade was performed, the new version is: d.d.d.d. 151843 REBOOT/SHUTDOWN Command from user. Code=%d User Info User issued a REBOOT or SHUTDOWN command. #%d: qapisetfcinterface- 151889 params_1_svc - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 224
was removed for LUN %d. Management port configuration has changed. Router configuration has changed. GE port %d was enabled user. GE port %d was disabled by user. FC port %d was enabled by user. FC port %d was disabled by user. Target at WWPN: xx.xx.xx.xx.xx.xx.xx.xx has been mapped to iSCSI portal - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 225
to normal operating range, Front: %dC Rear: %dC CPU1: %dC CPU2: %dC. sysTempMon: Critical Tem- 152145 perature, Shutting Down Front: %dC Rear: %dC User Info CPU1: %dC CPU2: %dC Router has reached a critical temperature ad is shutting down, Front: %dC Rear: %dC CPU1: %dC CPU2: %dC. QL3022 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 226
237572 "Failed to kill sys killer %d\n" 237573 Temperature over high threshold %d 249862 Temperature is back to normal range %d System Error Failed to kill system task. System Error Router temperature has exceeded the high temperature threshold. System Info Router temperature has - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 227
error. 56321 QLMP_Logout: Virtual Target Logged out App Info An array went offline because all the target ports of the array went offline. 56322 56866 of some other migration App Info Migration add failed because LUN is part of another migration job. job 56867 Selected Lun is a Control- App - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 228
find a Migration job for the associated LUN object. qapisetmigrfctar- 152096 gets_1_svc: Configuration Changed for migration User Info A set array was performed on one of the arrays. target 152099 LogMigration: Error in Writting log file Encountered an error while updating the miUser Info - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 229
ValidateSerialSchedule: 152108 Previous time %ld New User Info Reset the serial schedule delayed time to invalid if the last serial schedule job was removed. time %ld addMigration: Creating 152109 migration Job Failed with User Info Failed to Create a Migration Job. error %d MPX200 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 230
be allocated to an FCIP route. The route was not created. The router must be rebooted to clear this error. Error Invalid argument specified by user. The preceding message in the log indicates which parameter is in error. Error Specified route or port (FC/Ethernet) does not exist. Verify that the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 231
172238 FcipRoute#%d: Synchronization Error on Receive FCIP 172239 FcipRoute#%d: Decompression Error on Receive FCIP 172240 FcipRoute#%d: De-encapsu- FCIP lation Error on Receive 172245 FcipRoute#%d: Transmit Failure FCIP 172246 FcipRoute#%d: Remote Peer Disconnected FCIP 172247 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 232
184542 FcipRoute#%d: VLAN Info Unavailable FCIP Info Route definition includes VLAN, but the network VLAN device instance does not exist. This is an internal error. Try removing and reentering the route definition. 204835 QL3xxx:eth%x PHY Downshift occurred The Ethernet device could not - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 233
Class A digital device, pursuant to Part 15 of the FCC Rules. accordance with the instruction manual, may cause Hewlett-Packard Company may void the user's authority to operate the equipment Number should not be confused with the marketing name or model number of the product. Laser device All HP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 234
not try to open the laser device enclosure. There are no user-serviceable components inside. • Do not operate controls, make adjustments, or perform label in Figure 89 or equivalent may be located on the surface of the HP supplied laser device. Figure 89 Class 1 laser product label . This optional - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 235
International notices and statements Canadian notice (avis Canadien) Class A equipment This Class A Digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 236
or mistreated. Replacement is to be done by an HP authorized service provider using the HP spare part designated for this product. For more information about battery replacement or proper disposal, contact an HP authorized service provider. WARNING! Your switch contains an internal lithium manganese - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 237
HP, an authorized HP Partner, or their agents. For more information about battery replacement or proper disposal, contact an HP authorized reseller or service provider. Taiwan battery recycling notice The Taiwan EPA requires dry battery users in private households in the European Union MPX200 Multifunction - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 238
For more information about where you can drop off your waste equipment for recycling, contact your local city office, your household waste disposal service, or the shop where you purchased the product. Dutch notice Verwijdering van afgedankte apparatuur door privé-gebruikers in de Europese Unie Dit - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 239
d'informations sur les centres de collecte et de recyclage des appareils mis au rebut, veuillez contacter les autorités locales de votre région, les services de collecte des ordures ménagères ou le magasin dans lequel vous avez acheté ce produit. German notice Entsorgung von Altgeräten aus privaten - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 240
Hungarian notice Italian notice Smaltimento delle apparecchiature da parte di privati nel territorio dell'Unione Europea Questo simbolo presente sul prodotto o sulla sua confezione indica che il prodotto non può essere smaltito insieme ai - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 241
o ambiente e a saúde das pessoas. Para obter mais informações sobre locais que reciclam esse tipo de material, entre em contato com o escritório da HP em sua cidade, com o serviço de coleta de lixo ou com a loja em que o produto foi adquirido. Slovakian notice MPX200 Multifunction Router 241 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 242
Slovenian notice Spanish notice Eliminación de residuos de equipos eléctricos y electrónicos por parte de usuarios particulares en la Unión Europea Este símbolo en el producto o en su envase indica que no debe eliminarse junto con los desperdicios generales - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 243
method used to restore the MPX200 persistent data. The MPX200 configuration information is saved and restored using the MPX200 CLI commands or HP Command View EVA (see " Saving or restoring the MPX200 configuration" on page 40). NOTE: As with any important database, the MPX200 persistent data should - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 244
4. Enter the following command: MPX200 (admin) #> fru save FRU save completed. Configuration File is HP_StorageWorks_MPX200_FRU.bin. Please use FTP to extract the file out from the System. MPX200 (admin) #> NOTE: The FRU save creates a bin file containing the router's persistent data, configuration, - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 245
7. Enter the following command: MPX200 (admin) #> fru restore A list of attributes with formatting and current values will follow. Enter a new value or simply press the Enter key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 246
246 Saving and restoring the MPX200 configuration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 247
and C-series Fibre Channel fabrics. HP StorageWorks mpx Manager allows data migration across multi-vendor fabrics. • Heterogeneous array support: The mpx Manager for Data Migration Services supports data mi- gration across heterogeneous arrays (arrays manufactured by different vendors). For a list - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 248
mpx Manager for Data Migration Services multiple data migration job scheduling options Even though DMS supports 256 simultaneous migration jobs, typical array performance can be same or different priority. If you need to configure a large number of jobs (256, for example), you can configure them in - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 249
Migration Services uses the concept of job groups to associate data migration jobs with user-defined array. Select the array type attribute None to exclude the storage array from participating in data migration. The MPX200 simultaneously supports both iSCSI connectivity and data migration service - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 250
protection against some of the common user errors by enforcing the following restrictions: • An array must have an attribute of either to migrate to one or multiple destination LUNs. Any specified destination LUN can be part of a single data migration job. • Job groups: For better manageability, you - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 251
and end time of the job, source and destination LUNs and arrays, size of the job, total time consumed for the job, Microsoft Excel and use it as a data migration task report. HP recommends that you save migration logs after the data migration job is troubleshooting. MPX200 Multifunction Router 251 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 252
for Data Migration Services by describing the supported configurations, some best practices recommendations, and hardware and software setup. Supported configurations This section describes the supported topologies and fabrics, and lists the supported fabric and array types. Fabric configuration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 253
Supported storage arrays Table 32 lists the storage array types for which DMS currently provides support. Table 32 Supported storage arrays Vendor EMC Storage array -Packard (HP) HP StorageWorks Modular Storage Array (MSA) family HP StorageWorks Enterprise Virtual Array (EVA) family System - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 254
Ensure that the migration process has delivered the data to a sufficient quality level to support the target services. • Security Validation. Ensure that the migration process adheres to your company's security port with one or two ports from one of the array controllers. 254 Offline Data Migration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 255
for the following reasons: • The maximum number of arrays configured at any time is seven. • Arrays stored in persistence consume resources even if the array is offline and no longer needed. • After the migration is complete, HP recommends that you remove the arrays. MPX200 Multifunction Router 255 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 256
Runtime Environment to support web applet Download the application The HP StorageWorks mpx Manager for Data Migration Services is available at: http://www.hp.com/go/mpx200. To download the version of your operating system: 1. Click Support & Documents. 2. Click HP StorageWorks MPX200 Multifunction - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 257
in the folder from which the application was downloaded. 3. Follow the installation instructions. 4. After installation, an mpx Manager icon appears on the Windows desktop. HP StorageWorks mpx Manager for Data Migration Services for Linux After downloading the application, see the previous step - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 258
, see the HP StorageWorks MPX200 Multifunction Router Quick Start Guide. 3. Connect the storage array (source and array. 3. Present the source LUNs and destination LUNs to the MPX200 using the array vendor's configuration tools; for example, use Command View for HP Enterprise Storage Array (EVA - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 259
properties: symbolic name (optional) and target type (Source or Destination) (see "Setting array properties" on page 259). 8. Create the user-defined job groups (see "Creating a Data migration job group" on page 262). 9. Configure data migration jobs (see "Using the Data Migration Wizard" on page - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 260
is migration.) The mpx Manager displays a message indicating that the array properties have changed. 7. Click OK to close the message box. the changes and update the window before changing other array properties, click Refresh. Setting the array bandwidth After you have changed the Target Type to - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 261
• Throttle 2. If you select Throttle, enter a value between 1 and 400 in the User Defined Bandwidth (MB/s) box. (Figure 93 shows an example.) By default, the MPX200 uses all available bandwidth. Figure 93 Setting array bandwidth . 3. To save your changes, click Save. 4. In the Security Check dialog - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 262
group The HP StorageWorks mpx Manager provides both GUI and CLI interfaces to view and edit array properties, including the bandwidth. Setting array properties in the GUI Follow these steps to create a data migration job group in the mpx Manager GUI: 1. In the left pane, select the Services tab to - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 263
jobs, and then click OK. 4. In the Security Check dialog box, enter the data migration user password (default is migration), and then click OK. Creating a Data migration job group in • In the left pane, open the Services page and then right-click Data Migration Jobs. MPX200 Multifunction Router 263 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 264
GUI Follow these steps to schedule an individual data migration job in the HP StorageWorks mpx Manager. (To perform this operation in the CLI, see Scheduling an box shows the type of array (Source, Destination, or Src+Dest) for each of the arrays available for configuring the data migration job. - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 265
The mpx Manager does not allow you to drag a LUN from an array of Source type in the right pane and drop it onto the Destination LUN in the left pane. However, if the array type is Src+Dest, you can drop the LUN from that array onto either a Source LUN or Destination LUN in the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 266
5. In the Data Migration Jobs Options dialog box (see Figure 96), specify the job attributes as follows: 1. Under Scheduling Type, select one of the following: • Click Start Now to start the job immediately. • Click Schedule for Later, and then enter a Start Time and Start Date. • Click Serial - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 267
array, the CLI lists the LUNs that have been exposed to the MPX200 for migration, and prompts you to select one LUN. The destination LUN you select should not be a part :0a:37:18, 00-00-00 Symbolic Name HP MSA2012fc-0 HP HSV200-1 DGC RAID-2 HP HSV210-3 Target Type -----------Src+Dest Src+Dest Src - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 268
Please select a VPGroup for Destination Lun ('q' to quit): 1 LUN Vendor LUN Size( GB) Attributes 1 HP 10.00 2 HP 10.00 3 HP 20.00 4 HP 20.00 5 HP 10.00 6 HP 5.00 7 HP 5.00 8 HP 5.00 Please select a LUN as a Destination Lun('q' to quit): 1 I/O Size (0=32KB, 1=64KB, 2=128KB - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 269
need to be classified under a specific group for better management. DMS allows a maximum of 255 jobs to run simultaneously at any specific time per source array. To optimize MPX200 performance, HP recommends that you run simultaneously no more than four jobs on any specified source or destination - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 270
LUN attributes and creates a new DataMigration Job n (New) object below the first one. The default job name is created by using the source and destination array names. 4. Repeat the preceding steps to create migration jobs for all source LUNs to be migrated in a batch, as shown in Figure 98. Figure - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 271
configured with higher values. For details on Serial Schedule Jobs, see "Starting serial scheduled jobs" on page 271. 2. In the Job Description box, enter a user-defined name to describe this data migration job. 3. In the Group Name box, select a job group name from the list. The group name makes it - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 272
iSCSI to the same EVA, the MPX200 firmware includes a new iSCSI initiator (iqn. 1986-03.com.hp:fcgw.mpx200.dm.initiator) specifically for data migration and can be used by HP Command View EVA. In a typical EVA iSCSI configuration, HP Command View allows the user to create an EVA iSCSI host entry - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 273
and presenting LUNs for any iSCSI initiator connected to the EVA through the MPX200. 1. In HP Command View EVA, create a virtual disk: 1. Click the EVA storage system icon to start the iSCSI storage presentation. 2. Select the virtual disk folder. 3. Click Create Vdisk to create a LUN. A dialog box - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 274
the LUN after the virtual disk is created will allow the user to select the VPGroup. Figure 101 shows the creation of a virtual disk with HP Command View EVA. Figure 101 Virtual disk creation . 2. In HP Command View EVA, present a virtual disk: 1. Click the EVA storage system icon to start - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 275
: Each iSCSI MPX host number under Available iSCSI Controller Paths 102 DMS virtual disk presentation . When the steps in this section are completed, the MPX200 is ready to start migrating data to and from this EVA storage array. Viewing pane, select the Services tab. MPX200 Multifunction Router 275 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 276
2. In the right pane, select the Active Data Migration Jobs tab. The Active Data Migration Jobs page in the right pane shows a summarized view of all active jobs, as shown in Figure 103. Figure 103 Active Data Migration jobs . 3. To see a summarized view of all completed jobs, select the Completed - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 277
Start Time Fri Oct 9 10:56:56 2009 End Time --- Delta Time --- Source Array HP HSV210-3 Source Lun VPG:ID 1:1 Source Lun WWULN 60:05:08:b4:00:05: 4d:00:25:4a:01:00:00:00 Destination Lun Size 10.24 GB Number of DRL Blocks 0 Rescanning targets To determine whether one or more data LUNs - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 278
To rescan targets in the CLI: 1. Open a miguser session using the following command: miguser start -p config 2. To rescan for target ports, enter the following command: target rescan For example: MPX200 (admin) #> target rescan Scanning Target WWPN 00:00:02:00:00:00:00:00 Target Rescan done Scanning - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 279
2. In the left pane, click the job by JobID. Details for the specified job are listed in the right pane, as shown in Figure 104. Figure 104 Viewing migration job details . 3. (Optional) From the migration job details pane, perform any of the following job control actions as needed: • Click Pause to - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 280
Viewing job details and controlling job actions in the CLI You can also perform the preceding job control actions from the summary view. To do so, right-click a specific job, and then click the appropriate action on the shortcut menu. To view data migration job details in the CLI: 1. Open a miguser - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 281
now be saved. MPX200 (miguser) #> migration pause Job Id Type Status LUN ID LUN Size(MB) Src Symbolic Name 0 Offline Running ( 16%) 7 10000 HP MSA-1 Please select a Migration Job Id from the list above ('q' to quit): 0 All attribute values for that have been changed will now be saved - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 282
: • Click OK to close the log window after you have finished viewing it. • Click Clear to delete the contents of the log. • Click Export to download the logs in CSV file format, which can be viewed in any spreadsheet application, such as Microsoft Excel. • Click Print to send the contents of - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 283
To view the data migration job log in the GUI: 1. On the mpx Manager main window, click the View Logs button. MPX200 Multifunction Router 283 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 284
User-defined name for the job. • Job ID: Numeric ID. • Job Type: Migration job type (COMPARE or MIGRATION). • Operation: Task or action (ADDED, STARTED, COMPLETED, or ACK). • Source Array LUN: Migration source LUN. • Dest Array • Click Export to download the logs in CSV format that can be - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 285
2. To view all logs related to all migration jobs, enter the following command (see "show logs" on page 341): show logs 3. To view only a limited number of log entries, specify a value; for example: show logs 10 The following example shows how to view the system log in the CLI: MPX200 (admin - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 286
JobId 0(Offline) of group Group 0 with priority 0 from Target HP HSV200-0 Lun Invalid Wwuln(6) to Target HP HSV200-0 Lun Invalid Wwuln(7) with migration size 5.00 GB Thu Sep Configure Verifying Jobs. • In the left pane, open the Services page, and then right-click Configure Verifying Job. 3. In - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 287
Scheduling verification of job options Follow these steps to schedule the verification of job options: 1. In the Verify Migration Jobs wizard (Figure 107), click Options. Figure 107 Verify migration job wizard . 2. In the Verify Schedule Options dialog box, select the Scheduling Mode: either batch - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 288
must acknowledge jobs to free up the destination LUN so that it can become part of another job, if required. To acknowledge a completed data migration job: 1. In the left pane of the mpx Manager, select the Services tab, and then click Data Migration Jobs. 2. In the right pane, select the Completed - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 289
: 1. In the left pane of the mpx Manager, select the Services tab. 2. UnderFC Arrays, right-click the name of the offline array you want to remove. 3. From the shortcut menu, click Remove Offline Array. Data migration licenses This section provides information on data migration licenses. Types of - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 290
this procedure to install a data migration license key in the mpx Manager for Data Migration Services GUI. 1. In the mpx Manager, select the mpx Manager tab in the left pane. 2. In the left pane, click mpx HP StorageWorks MPX200: 3. In the right pane, select the Features tab. 4. On the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 291
Applied Wed Oct 8 09:54:28 2009 MPX200 (miguser) #> Applying an array-based license to a specific array You can apply an array-based license to a specified storage array using either the mpx Manager GUI or the CLI. This section provides instructions for both methods. MPX200 Multifunction Router 291 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 292
based licenses and installed the licenses in the MPX200, follow these steps to license a specific array for data migration. For every array that is licensed, one license is consumed: 1. In the left pane of the mpx Manager main window, select the mpx Manager tab. 2. On the Wizards - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 293
4. In the License Array dialog box (Figure 112), select the array for which you want to apply the license, and then click OK. Figure 112 License Array dialog box . The Information page for the selected array now shows the Array License as Licensed, as shown in Figure 113. MPX200 Multifunction Router - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 294
the licenses in the MPX200, follow these steps to license a specific array for data migration. For every array that is licensed, one license is consumed. 1. Open a miguser 00:1f:e1:50:0a:e1:4c, 01-2b-00 HP HSV200-0 Unknown 1 50:00:1f:e1:50:0a:37:18, 01-24-00 HP HSV210-1 Unknown 2 50:06:01:69:41:e0:18 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 295
HP HSV210-1] Target Type (1=SrcTarget, 2=DstTarget, 3=Src+Dest Target) [3 ] 1 Bandwidth for Migration (0=Array Bandwidth, 1-400 MBps ) [0 ] Do you want to apply array licenses in the GUI: 1. In the mpx Manager left pane, select the Services tab. 2. In the left pane, click mpx MPX200: - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 296
10229.00 GB Array Based Licenses Array based licences issued 3 Array based licences used 0 Available array based licenses 3 Command Line Interface This section provides information on using the CLI for data migration services. It defines the guest MPX200 account and the user sessions, admin and - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 297
one. Table 34 CLI commands Command type set Commands "set system" on page 299 "set features" on page 300 "set fc" on page 301 "set array" on page 302 "set VPGroups" on page 303 migration "migration_group add" on page 304 "migration_group remove" on page 305 "migration_group edit" on page 306 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 298
" on page 324 "show migration" on page 325 "show array" on page 326 "show luninfo" on page 329 "show 344 "show vpgroups" on page 345 "show compare_luns" on page 351 "show array" on page 326 "set array" on page 302 "array rm" on page 348 "array_licensed_port rm" on page 349 "show targets" on - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 299
and the ENTER key to do so. System Symbolic Name (Max = 64 characters) [Blade-1 ] Target Presentation Mode (0=Auto, 1=Manual) [Auto ] Controller Lun AutoMap (0=Enable, 1=Disable) [Disabled ] Target Access Control (0=Enable, 1=Disable) [Enabled ] Telnet (0=Enable, 1=Disable) [Enabled - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 300
set features Saves and activates the array's data migration license key. Session: admin Example: MPX200 (admin) #> set features A list of attributes with formatting and current values will follow. Enter a new value or - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 301
set fc Sets the port status and programmed connection status Session: admin Example: MPX200 (admin) #> set fc A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 302
) Target Type (1=SrcTarget, 2=DstTarget, 3=Src+Dest 4=None Target) Bandwidth for Migration (0=Array Bandwidth, 50-1600 MBps ) Enable Load Balancing (0=Enable, 1=Disable) Array based licensed applied. [HP MSA2012fc-0] [3 ] [0 ] [Enabled ] All attribute values for that have been changed will - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 303
set VPGroups Enables or disables the virtual port groups (VP groups), and specifies names to each VP group. VpGroup 1 cannot be disabled; however, you can change its name. Session: admin Example: MPX200 ( - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 304
migration_group add Creates a data migration job group that you can use to combine migration jobs to simplify scheduling and monitoring data migration processes. Session: miguser Example: MPX200 (miguser) #> migration_group add Please Enter Group Name that you want to create (Min = 4 Max = 64 chars) - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 305
migration_group remove Deletes or removes an existing data migration group that will not be used in any of the new data migration jobs that need to be scheduled. You may need to delete groups because there is limit of eight groups into which the MPX200 can classify data migration jobs. Session: - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 306
migration_group edit Renames an already existing data migration job group. Use this command to correct spelling mistakes that might have occurred when you typed the name while creating the data migration job group. Session: miguser Example: MPX200 (miguser) #> migration_group edit Index Group Name - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 307
:06:01:60:4b:a0:35:de, 82-03-00 50:00:1f:e1:50:0a:37:18, 00-00-00 Symbolic Name HP MSA2012fc-0 HP HSV200-1 DGC RAID-2 HP HSV210-3 Target Type -----------Src+Dest Src+Dest Src+Dest Src+Dest Please select a Source Target from the list above ('q' to quit): 2 Index ----1 2 3 4 (VpGroup - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 308
LUN Size( GB) Attributes 1 HP 10.00 2 HP 10.00 3 HP 20.00 4 HP 20.00 5 HP 10.00 6 HP 5.00 7 HP 5.00 8 HP 5.00 Please select a LUN Description (Max = 64 characters) default name [ DGC RAID-2:VPG4:001 to HP HSV210-3:VPG1:001 ] Index ----0 1 Group Owner ----------1 1 Group Name - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 309
job. Session: miguser Example: MPX200 (admin)(miguser) #> migration rm Job Type Status ID --- ---- 0 Offline Running ( 5%) Job Description DGC RAID-2:VPG4:001 to HP HSV210-3 Please select a Job Id from the list above ('q' to quit): 0 Do you wish to continue with the operation(yes/no - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 310
the scheduling time. Session: miguser Example: MPX200 (admin)(miguser) #> migration stop Job Type Status ID --- ---- 0 Offline Running ( 61%) Job Description HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 311
over from the first block. Session: miguser Example: MPX200 (admin)(miguser) #> migration start Job Type Status Job Description ID --- ---- 0 Offline Stopped HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above ('q' to quit): 0 Start Time for JobId 0:(1=Now - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 312
the migration was paused. Session: miguser Example: MPX200 (admin)(miguser) #> migration pause Job Type Status Job Description ID 0 Offline Running ( 67%) HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 313
data migration was paused. Session: miguser Example: MPX200 (admin)(miguser) #> migration resume Job Type Status Job Description ID 0 Offline Paused ( 80%) HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 314
deleted from the database. Session: miguser Example: MPX200 (miguser) #> migration acknowledge Job Type Status Job Description ID 0 Offline Completed (100%) HP HSV200-0:LUN1 to DGC RAID-1:LUN0 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that have - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 315
start_serial_jobs Starts one or more serial scheduled jobs that have been configured but not yet started. Session: miguser Example: MPX200 (miguser) #> start_serial_jobs Serial Job Start Time (1=Now, 2=Delayed) [Now ] 2 Please specify a Date & Time (in - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 316
select a VPGroup for Source Lun ('q' to quit): 1 LUN Vendor LUN Size( GB) Attributes 1 HP 10.00 SRC LUN 2 HP 10.00 3 HP 20.00 4 HP 20.00 5 HP 10.00 6 HP 5.00 7 HP 5.00 8 HP 5.00 Please select a LUN as a Source Lun ('q' to quit): 1 Index ----0 1 WWPN, PortId 20 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 317
select a VPGroup for Destination Lun ('q' to quit): 1 LUN Vendor LUN Size( GB) Attributes 1 HP 10.00 SRC LUN 2 HP 10.00 3 HP 20.00 4 HP 20.00 5 HP 10.00 6 HP 5.00 7 HP 5.00 8 HP 5.00 Please select a LUN as a Destination Lun('q' to quit): 2 I/O Size (0=32KB, 1=64KB - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 318
compare_luns rm Deletes a LUN compare job. Session: miguser Example: MPX200 (miguser) #> compare_luns rm Job Type Status Job Description ID 0 Offline Verify Running HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 Do you wish to continue with - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 319
to change the scheduling time. Session: miguser Example: MPX200 (miguser) #> compare_luns stop Job Type Status Job Description ID 0 Offline Verify Running HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that have - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 320
process restarts from the first block. Session: miguser Example: MPX200 (miguser) #> compare_luns start Job Type Status Job Description ID 0 Offline Stopped HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 Start Time for JobId 0:(1=Now - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 321
the compare was paused. Session: miguser Example: MPX200 (miguser) #> compare_luns pause Job Type Status Job Description ID --- ---- 0 Offline Verify Running HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 322
the compare was paused. Session: miguser Example: MPX200 (miguser) #> compare_luns resume Job Type Status Job Description ID --- ---- 0 Offline Verify Paused HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for that - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 323
is permanently deleted from the database. Session: miguser Example: MPX200 (miguser) #> compare_luns acknowledge Job Type Status Job Description ID 0 Offline Completed HP HSV200-0:0001 to DGC RAID-1:0000 Please select a Job Id from the list above ('q' to quit): 0 All attribute values for - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 324
ID WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID Firmware Revision No. Frame Size Execution Throttle Connection Mode SFP Type FC1 Enabled FCP ID WWNN WWPN Port ID WWNN WWPN Port ID WWNN WWPN Port ID Firmware Revision No. Frame Size Execution Throttle Connection Mode SFP Type FC2 Enabled FCP - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 325
Migration Performance Start Time End Time Delta Time Source Array Source Lun VPG:ID Source Lun WWULN Source Lun Size Destination Array Destination Lun VPG:ID Destination Lun WWULN Destination Lun Size 0 b1 HP HSV210-3:VPG1:001 to HP MSA2012fc-0:VPG1:001 Group 0 Offline Not Applicable Running 64 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 326
+Dest WWPN 50:06:01:69:41:e0:18:94 Port ID 01-2d-00 State Online Array Bandwidth Available Bandwidth Load Balancing Enabled Array License Not Applied Symbolic Name HP HSV210-2 State Online Vendor ID HP Product ID HSV210 Target Type Src+Dest WWPN 50:00:1f:e1:50:0a:37:1c Port - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 327
Load Balancing Array License Enabled Not Applied MPX200 Multifunction Router 327 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 328
list above ('q' to quit): 1 LUN Information WWULN 60:05:08:b4:00:05:4d:94:00:00:f0:00:35:a1:00:00 LUN Number 1 VendorId HP ProductId HSV210 ProdRevLevel 5000 Portal 0 Lun Size 10240 MB Lun State Online LUN Path Information Controller Id 1 1 WWPN, PortId 50:00:1f:e1:50 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 329
list above ('q' to quit): 1 LUN Information WWULN 60:05:08:b4:00:05:4d:94:00:00:f0:00:35:a1:00:00 LUN Number 1 VendorId HP ProductId HSV210 ProdRevLevel 5000 Portal 0 Lun Size 10240 MB Lun State Online LUN Path Information Controller Id 1 1 WWPN, PortId 50:00:1f:e1:50 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 330
Provides the current status and path information for any array LUN. Use this command to check the usability of Please select a LUN from the list above ('q' to quit): 0 LUN Information WWULN LUN Number VendorId ProductId ProdRevLevel Portal Lun Size Lun State 60:0c:0f:f0:00:d5:9c:a4 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 331
Controller Id 0 WWPN, PortId 20:78:00:c0:ff:d5:92:e5, 02-04-00 Path Status ----------Current Optimized MPX200 Multifunction Router 331 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 332
show migration_params Displays the current time and start time of a serial scheduled job. Session: miguser Example: MPX200 (miguser) #> show migration_params Current Time : Mon Dec 15 08:36:12 2009 Serial Scheduled Start Time : Mon Dec 15 08:37:00 2009 332 Offline Data Migration - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 333
show mgmt Displays management port information, including the IP address, subnet mask, and gateway. Session: miguser Example: MPX200 (miguser) #> show mgmt Management Port Information IPv4 Interface Enabled IPv4 Mode Static IPv4 IP Address 172.35.14.53 IPv4 Subnet Mask 255.255.254.0 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 334
show memory Displays the free and total memory. Session: miguser Example: MPX200 (miguser) #> show memory Memory Units Physical Buffer Pool Nic Buffer Pool Process Blocks Request Blocks Event Blocks Control Blocks Client Req Blocks FCIP Buffer Pool FCIP Request Blocks FCIP NIC Buffer Pool Sessions - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 335
show properties Displays the CLI properties. Session: miguser Example: MPX200 (miguser) #> show properties CLI Properties Inactivty Timer Prompt String 15 minutes MPX200 MPX200 Multifunction Router 335 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 336
License Usage Total capacity licensed Migration license consumed License consumed by active jobs Total capacity available Array Based Licenses Array based licences issued Array based licences used Available array based licenses 10240.00 GB 1.00 GB 10.00 GB 10229.00 GB 3 0 3 336 Offline Data - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 337
: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Port Number -----GE1 GE2 FC1 FC2 Bytes/s (init_r) -------0 0 23M 0 Bytes/s (init_w) -------0 0 0 23M Bytes/s (tgt_r) -------0 0 0 0 Bytes/s (tgt_w) -------0 0 0 0 Bytes/s (total) -------0 0 23M - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 338
show perf byte Displays the active job performance in bytes. Session: miguser Example: MPX200 (miguser) #> show perf byte WARNING: Valid data is only displayed for port(s) that are not associated with any configured FCIP routes. Displaying bytes/sec (total)... (Press any key to stop display) GE1 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 339
: miguser Example: MPX200 (admin) (miguser) #> show features License Information FCIP 1Gig Not Licensed DM Capacity Licensed DM Array Licensed Feature Key Information Key 806400-LCPJRHKUYZ9NS-DM-100TB (DATA-MIGRATION CAPACITY 100TB) Chassis Licensed 0851E00035 Date Applied - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 340
miguser :COMPLETED : JobId 1(Offline) of group Group 0 with priority 0 from Target HP HSV200-0 Lun 60:05:08:b4:00:07:59:a4:00:02:a0:00:03:ba:00:00(9) to Target : JobId 0(Offline) of group Group 0 with priority 0 from Target HP HSV200-0 Lun 60:05:08:b4:00:07:59:a4:00:02:a0:00:00:7e:00:00(6) - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 341
show logs Displays log BridgeApp event information. Session: miguser Example: MPX200 (admin) (miguser) #> show logs 10 10/09/2009 11:11:04 BridgeApp 3 QLFC_Login: Port Name 500601604ba035de 10/09/2009 11:15:29 QLFC 3 #0: QLIsrEventHandler: RSCN update (8015) rscnInfo:0x2080000 VpIndex:0x0 10/09/ - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 342
show luns Displays all the LUNs and their detailed information. Session: miguser Example: MPX200 (admin) (miguser) #> show luns Target(WWPN) VpGroup LUN ============ ======= === 20:78:00:c0:ff:d5:9a:05 VPGROUP_1 0 VPGROUP_1 1 VPGROUP_1 2 VPGROUP_1 3 VPGROUP_1 4 VPGROUP_1 5 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 343
VPGROUP_1 3 VPGROUP_1 4 VPGROUP_1 5 VPGROUP_1 6 VPGROUP_1 7 VPGROUP_1 8 50:00:1f:e1:50:0a:37:1b VPGROUP_1 0 VPGROUP_1 1 VPGROUP_1 2 VPGROUP_1 3 VPGROUP_1 4 VPGROUP_1 5 VPGROUP_1 6 VPGROUP_1 7 VPGROUP_1 8 MPX200 Multifunction Router 343 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 344
show targets Displays the WWPN and WWNN for all targets that are zoned in with the router ports. If one or more data LUNs are exposed to the router ports from the target, no information is shown. Session: miguser Example: MPX200 (miguser) #> show targets Target Information WWNN 50:08:05:f3: - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 345
more LUNs to the router. The router provides the VP group by combining virtual port entities from each Fibre Channel port. Every VP group consists of one virtual port from each Fibre Channel port. Because there are four virtual ports per Fibre Channel port, there are four VP groups. Session: miguser - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 346
to see whether one or more data LUNs are exposed to the router ports from the target. This command causes the router to create an array entity for the target ports through which the router is able to see data LUNs. The router deletes those ports from show targets output (see - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 347
save capture Captures the system log that you can use to detect and troubleshoot problems when the MPX200 is exhibiting erroneous behavior. This command generates a System_Capture.tar.gz file that provides a detailed analysis. Session: admin Example: MPX200 (admin) #> save capture - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 348
:1f:e1:50:0a:37:1b, 02-04-00 HP HSV210-1 Src+Dest 2 20:70:00:c0:ff:d5:9a:05, 02-0f-ef HP MSA2012fc-2 Src+Dest Please select a Target Id to remove from the list above ('q' to quit): 0 Array is Licensed WARNING Removing Array License, Will not allow you to reuse the - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 349
ports. Use this command to remove the ports (shown by the show migration_usage command) for which you have removed an array without also removing the array's license. Session: miguser Example: MPX200 (admin) (miguser) #> array_licensed_port rm 01. Symbolic name = DGC RAID-1 No of ports registered - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 350
readjust_priority Modifies the priority of serial scheduled jobs. Use this feature if you have more than 256 jobs that must be executed sequentially. This operation is allowed only if the high priority jobs are completed, and there is room for shifting the priority values on already configured jobs. - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 351
Status I/O Size Compare State Compare Performance Start Time End Time Delta Time Source Array Source Lun VPG:ID Source Lun WWULN Source Lun Size Destination Array Destination Lun VPG:ID Destination Lun WWULN Destination Lun Size Number of DRL Blocks 0 b1 CX-320-A:VPG1:000 to MSA-2012:VPG1:000 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 352
the zoning such that each router port sees both controller ports from the source array and the destination array. • Balance the LUNs on the source and destination arrays between the two controller ports. NOTE: HP recommends that you do not simultaneously run more than four data migration jobs. Using - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 353
in data migration jobs. 11. Present LUNs from Step 10 from the storage array to the MPX200 ports. 12. Make sure that the LUNs are presented with the MPX200. The MPX200 can now see the new set of LUNs under the array entity that was licensed in Step 5. 15. Configure data migration jobs as described - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 354
target entity, reboot the MPX200. Troubleshooting Table 35 lists some problems that may occur with the data migration service and provides a possible reason or solution for each. Table 35 Troubleshooting Problem The show array command does not show any array entities. Reason and solution Ensure - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 355
MPX200 host group. You must refresh the GUI three times to rediscover the new set of LUNs. The MPX200 displays the following messages: Array reconfiguration detected. Refer to user manual for trouble shooting. WWULN: 60:05:08:b4:00:05:4d:94:00:00:c0:0 0:00:2d:00:00 mapped on different LUN IDs - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 356
, the MPX200 will not see any of the assigned LUNs. On presenting a data LUN for the first time, the router considers it to be an array reconfiguration scenario, where the data LUN replaces the controller LUN. To see the correct LUN details, perform either of these options: • In the CLI, issue - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 357
, agent startup notification, Apple Mac storage setup, Apple Mac OS XiSCSI initiator, Apple Mac iSCSI initiator, 61 authority requirements, 141 B battery replacement notice, beacon command, 143 blade command, 143 C Cautions file systems, chassis diagnostics, 127 clear command, 143 CLI usage, 185 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 358
device names, assigning, 71 diagnostics chassis, 127 POST, 128 Discovered Targets tab, discovery target device, document related documentation, 137 documentation HP website, 137 E EVA storage systems, 46 exit command, 144 F FC port down notification, 205 FC port table, 192 FCC notice, 233 fciproute - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 359
command, 147 history command, 149 host system, preparing, 73 HP Command View EVA troubleshooting, I image command, 149 initiator command, 150 initiator object table, initiator setup Linux, 66 initiators 10-GbE, 25 number of paths required, number of, 24 Input Power LED, 127 Installation planning, 24 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 360
P pages MPIO Properties, Select Features, part numbers and options, ping command, 153 power control module, 19 product , 47 Subscriber's choice, HP, 138 Sun SolarisiSCSI initiator, support Fibre Channel switch, operating system, support fabric, 48 supported maximums, supportmultipath software, SUSE - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 361
Settings tab, traceroute command, 183 V VMwareiSCSI initiator, VP group notification, 206 VP group table, 198 W websites HP Subscriber's choice for business, product manuals, 137 Windows Server 2003 iSCSI initiator, Windows Server 2003 Scalable Networking Pack, 60 MPX200 Multifunction Router 361 - HP StorageWorks 6400/8400 | HP StorageWorks MPX200 Multifunction Router user gui - Page 362
362
HP StorageWorks
MPX200 Multifunction Router
User Guide
This user guide describes the MPX200 Multifunction Router, which supports the EVA family of Fibre Channel
storage systems for integrated iSCSI connectivity. The MPX200 hardware is integrated with up to four EVA
storage systems and HP Command View EVA to deliver multi-protocol capabilities, including Fibre Channel,
iSCSI, and FCIP. This document is intended for system administrators with knowledge of HP StorageWorks
EVA4x00/6x00/8x00 storage systems, configuring LUNs using HP Command View EVA, HP Fibre Channel
SANs, Ethernet, TCP/IP networking, iSCSI, and FCIP.
Part number: 5697-0306
Fourth edition: January 2010