HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch event message
HP StorageWorks 8/20q - Fibre Channel Switch Manual
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 8/20q manual content summary:
- HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 1
HP StorageWorks 8/20q Fibre Channel Switch event messages reference guide Part number: 5697-7873 Third edition: January 2009 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 2
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. 8/20q Fibre Channel Switch event messages reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 3
this guide 5 Intended audience 5 Related documentation 5 Document conventions and symbols 6 HP technical support 6 Product warranties 6 Subscription service 6 HP and descriptions 46 7 Informative event messages and descriptions 49 8/20q Fibre Channel Switch event messages reference guide 3 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 4
4 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 5
installation instructions • HP StorageWorks 8Gb Simple SAN Connection Kit cabling guide • HP StorageWorks 8/20q Fibre Channel Switch installation and reference guide • HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide • HP StorageWorks 8/20q Fibre Channel Switch - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 6
, calls may be recorded or monitored. Product warranties For information about HP StorageWorks product warranties, see the warranty information website: http://www.hp.com/go/storagewarranty Subscription service HP strongly recommends that customers sign up online using the Subscriber's choice web - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 7
support/ • http://www.docs.hp.com Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, please send a message to [email protected]. All submissions become the property of HP. 8/20q Fibre Channel Switch event messages reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 8
8 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 9
, see the HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide. For more information about the Simple SAN Connection Manager event browser, see the HP StorageWorks Simple SAN Connection Manager user guide. 8/20q Fibre Channel Switch event messages reference guide 9 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 10
event from the Switch source: [1][Wed Oct 24 12:30:29.965 UTC 2007][I][8400.0022][Switch][Successful login user (snmp@IB-session6) with admin privilege] For more information about the CLI commands, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. Configuring the event - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 11
Check (CRC) errors • Decode errors • Inter-switch link (ISL) connections • Device logins • Device logouts • Loss-of-signal errors For more information, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 8/20q Fibre Channel Switch event messages reference guide 11 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 12
12 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 13
switch, Simple SAN Connection switch given by domain_ID. (A1003.000E) (Couldn't acquire lock from domain domain_ID) The fabric may be changing, Wait for the fabric to and therefore could not stabilize, then try again. acquire the lock. 8/20q Fibre Channel Switch event messages reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 14
There is a conflict in the zoning configuration, causing the Fabric inter-switch link (ISL) to isolate. Two aliases were discovered with . Check the status of the switch given by domain_ID. (A1003.0017) (Activation of zoneset by management server failed due to port port_number out of range.) A - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 15
indicates failure due to zoning limits, Isolating link) Response from other switch indicates that the active zone sets could not be merged. Edit or delete the conflicting zone objects or deactivate the zone set on the remote switch. 8/20q Fibre Channel Switch event messages reference guide 15 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 16
Supported by other switch, Isolating link) The attempt to merge two fabrics failed because each active fabrics failed because the active zone sets contained a zone with the same name, but different membership. The Fabric inter-switch link (ISL) isolated because the local switch is configured for FC - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 17
the ISL group before activating. (A1003.0040) (Zone Member type member_type unsupported.) An invalid zone member type was discovered in a zone. Hard zone membership must be defined by domain_ID and port number. Correct the member type. 8/20q Fibre Channel Switch event messages reference guide 17 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 18
set from the zoning database. Some switches in the fabric may not support Fibre Channel (FC) address zone members in the active zone set. Edit the necessary zone sets to use worldwide name (WWN) zone membership. The security set cannot be activated because the port group does not have an entry - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 19
orphan zones while the fabric was busy. Retry the command later. An Update Fabric Configuration (UFC) message was received with a failed status from the switch given by domain_ID. Check the status of the switch at the given domain ID. 8/20q Fibre Channel Switch event messages reference guide 19 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 20
) (A1004.0001) (Port in active hard zone, but not installed or present on this switch.) (A1004.0005) (No communication from neighbor switch on port port_number with domain ID domain_ID, lost route) (A1004.0008) (Eport Isolating due to ELP Incompatibility) A switch in the fabric is using a domain - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 21
so that it is the same on both switches. The recommended value is 10 seconds. Modify E_D_TOV so that it is the same on both switches. The recommended value is 2 seconds. Modify the switches so that the time out values are the same. 8/20q Fibre Channel Switch event messages reference guide 21 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 22
WorldWide Name (WWN) device_WWN not allowed to join fabric.) (A1004.0030) (Topology change, lost route to switch with domain ID domain_ID) (A1004.0032) (E_Port not supported on remote port. Reconfigure remote switch to connect.) (A1004.0033) (Remote switch is in Interop mode or using Legacy Address - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 23
key to license additional E_Ports. The domain ID of the switch is changed due to an interoperability configuration change. The old domain ID does not conform to the range of allowed domain IDs for the new interoperability setting. None 8/20q Fibre Channel Switch event messages reference guide 23 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 24
with the destination. A denial of service entry will be set up to discard these frames. Investigate the source at the specified Fibre Channel (FC) address. (A1004.0054) (Eport Isolating due to Link to self) Two ports on the same switch Disconnect one or both ports. cannot be connected to one - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 25
.003A) (Fabric Login (FLOGI) from address FC_address failed authorization/authentic ation) Security authentication failed. Check the security configuration on both the device and the switch to ensure that they are configured properly. 8/20q Fibre Channel Switch event messages reference guide 25 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 26
IOStreamGuard on the port. Reconfigure the port to be compatible with the port hardware. (A1005.004B) (The switch was reset due to firmware upgrade issues) (A1005.004E) (Attempts to login backend switch fail because backend switch does not support NPIV.) After a firmware upgrade, the cyclic - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 27
Vversion -> Vversion is not supported) The installed firmware cannot Perform a hard reset. be activated without disrupting I/O traffic. The installed firmware cannot Perform a hard reset. be activated without disrupting I/O traffic. 8/20q Fibre Channel Switch event messages reference guide 27 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 28
. The static IP address will be used. Investigate the DHCP server. (A1005.0072) (Unable to turn off lasers, please power off the switch) Conditions exist that could damage the switch and the switch was unable to turn off the Fibre Channel (FC) port lasers. Power down the switch and contact your - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 29
. The switch connected to the TR_Port is part of the local fabric. Remove the switch attached to the TR_Port from the local fabric or disconnect the TR_Port (transparent routing is not needed to reach devices in the local fabric). 8/20q Fibre Channel Switch event messages reference guide 29 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 30
port_wwn logged in at FC-ID fc_id, duplicate port name logged in at FC-ID fc_id) A device is logged in on another switch in the local fabric with the same port WWN as a proxy for a device in a remote fabric. The proxy created on the local switch has been removed. Examine the HBAs with the given - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 31
of the local switch. A challenge authentication frame was received from a remote switch, but the local switch does not have an entry for itself within the active security set ISL group. Edit the ISL group to include the local switch. 8/20q Fibre Channel Switch event messages reference guide 31 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 32
the active security set. A response received on the indicated port lacked Common Transport (CT) authentication. Verify that the CT security configuration of the management application using the remote port is compatible with the configuration of the Management Server security group on the switch - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 33
, possible Chap secret misconfiguration or security breach attempt.) A Challenge Handshake Authentication Protocol (CHAP) authentication attempt failed due to failure while comparing secrets. Check security configuration. 8/20q Fibre Channel Switch event messages reference guide 33 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 34
entry found for port) (A1007.0029) (Security protocol not using chap, unable to authenticate.) (A1007.002A) (Inconsistent Fabric Binding configuration. Enabled on remote switch(s), disabled on local switch. A Remote Authentication Dial Confirm that the secret is the In User Service (RADIUS) same - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 35
to switch binding failure following configuration change.) A configuration change was made to the switch binding list such that the device(s) on the port were no longer allowed to be logged in. Add the devices to the switch binding list. 8/20q Fibre Channel Switch event messages reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 36
user authentication. No radius servers configured for user authentication) An attempt was made to authenticate a switch login through a Remote Authentication Dial In User Service , and ambient temperature. If the problem cannot be corrected, power down the switch. (A3001.0001) (Temp overwarm, - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 37
. Contact technical support if a non-disruptive code load and activation is required. (A6001.0003) (cmon: switch failed NDCLA) The Non-Disruptive Code Load and Activation (NDCLA) has failed. The switch has performed a hard reset. None 8/20q Fibre Channel Switch event messages reference guide 37 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 38
.0019) (ZoneSet zone_set has been deactivated by user user_name) A zone set in the zoning database has been deactivated. (C) (8300.001A) (A ZoneSet activation has failed.) An attempt to activate a zone set has failed. (C) (8400.0002) (Switch) (The switch The switch is being reset. is being reset - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 39
) (C) (8400.001D) (Switch) (The switch The switch is being shutdown. is being shutdown - this may take several seconds) (C) (8400.0027) (Switch) (Invalid user account_name attempted to log into switch) Invalid user login attempt. 8/20q Fibre Channel Switch event messages reference guide 39 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 40
to the Fibre Channel (FC) ports is in progress. (C) (8400.0046) (Switch) (Upgrading The switch has been upgraded to allow for License for multiple ISL capability) multiple inter-switch links. (C) (8400.0047) (Switch) (New licenses are being installed New licenses are being installed. 40 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 41
successfully installed. (C) (8400.0065) (Switch) (The switch is being automatically hardreset after leaving the Diagnostics AdminState.) The switch automatically undergoes a hard reset after leaving the Diagnostics administrative state. 8/20q Fibre Channel Switch event messages reference guide 41 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 42
the Diagnostics administrative state. (C) (8400.006A) (Switch) (Upgrading The Fabric Security Bundle license was License for Fabric Security) applied successfully. (C) (8400.006B) (Switch) (Upgrading License for CLI Extended Credits capability) (C) (8400.008A) (A Zoning merge has occurred - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 43
to two switches) (C) (8700.0013) (Connection failure, fabric limited to two switches) The switch cannot be connected to the fabric due to a license restriction. The switch cannot be connected to the fabric due to license restriction. 8/20q Fibre Channel Switch event messages reference guide 43 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 44
IP addresses are the factory defaults or the servers are disabled in the Call Home service has occurred on the active SMTP server. Communications .0016) (SMTP server ip_address, port port_number, did not accept any recipients profile.) (C) (8F00.000C) Fabric Status status The Simple Mail Transfer - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 45
The severity level of the switch status has changed. The description field will show the reason for the switch status. The severity level of the link status has changed. The description field will show the reason for the link status. 8/20q Fibre Channel Switch event messages reference guide 45 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 46
login username account_name) This switch is attempting to activate a zone set but cannot do so due to a resource problem. A login was attempted with an account name that was not in the list of allowable users of switch management. (W) (8400.0018) (Switch) (User account_name login rejected maximum - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 47
until a valid SMTP address has been configured and enabled) Either both Simple Mail Transfer Protocol (SMTP) server IP addresses in the Call Home service configuration are the default value (0.0.0.0) or they have not been enabled. 8/20q Fibre Channel Switch event messages reference guide 47 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 48
, port port_number. Retry will not be attempted, ignoring recipient.) (W) (8F00.000C) (Fabric Status status) The Call Home service failed fabric status. (W) (8F00.000D) (Switch Status status) The severity of the switch status has changed. The description field will show the reason for the switch - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 49
register Fabric Device Management Interface (FDMI) information with this switch. An HBA has attempted to register its FDMI information with the switch, but allowing it to do so would cause the FDMI database to exceed the configured limit. 8/20q Fibre Channel Switch event messages reference guide 49 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 50
the switch. The IP address of the user is unknown. A user with admin authority has successfully logged into the switch with the specified IP address. A user without admin authority has successfully logged into the switch. The IP address of the user is unknown. (I) (8400.0025) (Switch) (Successful - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 51
.001F) (SYNC_ACQ) The port identified in previous event messages has synchronized with a connected device. (I) (8600.0020) (SYNC_LOSS) The port identified in subsequent event messages has lost synchronization with a connected device. 8/20q Fibre Channel Switch event messages reference guide 51 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch event message - Page 52
a new Fabric inter-switch link (ISL) in the fabric (I) (8F00.000A) Link Removed A link has been removed from the display. This is either because the fabric discovery process has discovered that the link is no longer in the fabric, or because the user has deleted the link manually. (I) (8F00
HP StorageWorks
8/20q Fibre Channel Switch event messages
reference guide
Part number: 5697-7873
Third edition: January 2009