HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch Installation
HP StorageWorks 8/20q - Fibre Channel Switch Manual
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 8/20q manual content summary:
- HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 1
HP StorageWorks 8/20q Fibre Channel Switch Installation and Reference Guide Part number: 5697-0314 Fourth edition: February 2010 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 2
warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP Communications Corporation. 8/20q Fibre Channel Switch Installation and Reference Guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 3
Contents About this guide 7 Intended audience 7 Related documentation 7 Document conventions and symbols 8 Rack stability 9 HP technical support 9 Customer self repair 9 Product warranties 9 Subscription service 9 HP Protocol 18 Storage Management Initiative-Specification (SMI-S 18 File - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 4
32 Verify the kit contents 32 Rack the switch 33 instructions and documentation for SIM, RSP, OSEM, and ISEE 43 RSP requirements for the CMS 43 Infrastructure requirements for implementing Call Home to HP Services 44 Configuring Call Home to HP services 44 4 Diagnostics and troubleshooting - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 5
specifications 65 Environmental requirements 66 D Factory configuration defaults 67 Factory switch configuration 67 Factory port configuration 68 Factory port threshold alarm configuration 69 Factory zoning configuration 69 Factory SNMP configuration 70 Factory switch services Guide 5 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 6
65 13 Electrical specifications 65 14 Environmental requirements 66 15 Switch configuration defaults 67 16 Port configuration defaults 68 17 Port threshold alarm configuration defaults 69 18 Zoning configuration defaults 69 19 SNMP configuration defaults 70 20 Services configuration defaults - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 7
, and fabric management. • Installing and configuring an HP StorageWorks 8/20q Fibre Channel Switch • Diagnosing and troubleshooting switch problems Intended audience This manual introduces users to the switch and explains its installation and service. It is intended for users who are responsible - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 8
blue text: Figure 1 Medium blue, underlined text (http://www.hp.com) Bold font Italics font Monospace font Monospace, italic font Monospace or data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints and - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 9
/selfrepair This product has no customer replaceable components. Product warranties For information about HP StorageWorks product warranties, see the warranty information website: http://www.hp.com/go/storagewarranty Subscription service HP strongly recommends that customers sign up online using the - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 10
sites For other product information, see the following HP web sites: • http://www.hp.com • http://www.hp.com/go/storage • http://www.hp.com/support/ • http://www.docs.hp.com Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, please send - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 11
• For more information about the CLI, see the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. • For information about QuickTools, see the HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Management User Guide. • For information about Simple SAN Connection Manager - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 12
Switch LEDs and controls The switch LEDs provide information about the switch's operational status. These LEDS include the Input Power LED (green), Heartbeat LED (green), and the System Fault LED (amber) (Figure 2). For information about port LEDs, see "Port LEDs" on page 14. The Maintenance button - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 13
maintenance mode and return to normal operation, press and release the Maintenance button momentarily to reset the switch. 8/20q Fibre Channel Switch Installation and Reference Guide 13 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 14
as an 8- or 16-port switch, enabling ports 0-7 or 0-15 respectively. You can enable additional ports up to the 20-port maximum using the HP StorageWorks 8/20q 4-port Upgrade License. For more information, see "Installing feature license keys" on page 42. Port LEDs Each port has its own Logged - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 15
or as an E_Port when connected to another switch. FL_Port Fabric loop port-supports a loop of up to 126 devices. An FL_Port can also configure itself by connecting an 8/20q Fibre Channel Switch to an HP StorageWorks B-series or C-Series remote fabric. The TR_Port and Reference Guide 15 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 16
Ethernet port The Ethernet port is an RJ-45 connector that provides a connection to a workstation through a 10/100 Base-T Ethernet cable (Figure 5). A workstation can be a Windows or a Linux server that is used to configure and manage the switch fabric. An Ethernet connection to the switch is - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 17
) and into a 100-240 VAC power source. Switch management The switch supports the following management tools and protocols: • QuickTools web applet, page 18 Simple Network Management Protocol, page 18 • Storage Management Initiative-Specification (SMI-S), page 18 • File transfer protocols, page 18 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 18
Guide. Simple Network Management Protocol SNMP provides monitoring and trap functions for the fabric. The switch firmware supports or QuickTools. Storage Management Initiative-Specification (SMI-S) SMI-S provides for see the HP StorageWorks 8/20q Fibre Channel Switch CIM Agent Reference Guide. File - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 19
Feature licenses, page 21 • Multiple switch fabrics, page 21 • Switch services, page 24 • Security, page 26 • Fabric management, page 28 Devices switches. • The transmission speeds of your HBAs and SFPs. The switch supports 2-Gb/s, 4-Gb/s and 8-Gb/s transmission speeds. IMPORTANT: Setting a Guide 19 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 20
000) Performance The 8/20q Fibre Channel Switch supports class 2 and class 3 Fibre Channel service at transmission rates of 8-Gb/s with about cable types and transceivers, see "Technical specifications" on page 63. Each Fibre Channel port is supported by a data buffer with a 16 credit capacity - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 21
connectivity, see the SAN design reference guide available at the HP website: http://www.hp.com/go/SANdesignguide. The following on the same switch under the following conditions: • Heavy I/O traffic between specific server and storage devices. • Distinct speed mismatch between devices such as - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 22
the default domain ID, domain ID lock, and principal priority parameters, see the set config switch command in the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. If you connect a new switch to an existing fabric with its domain ID unlocked, and a domain ID conflict occurs - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 23
supported in a remote fabric, see the HP StorageWorks 8/20q Fibre Channel Switch release notes, and the HP StorageWorks SAN Design reference guide located at the HP website: http://www.hp to different remote fabrics. • For mappings between a specific 8/20q Fibre Channel Switch and a remote fabric, - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 24
to the remote fabric. See the HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Management User Guide for important details on creating and is disabled. NOTE: Simple SAN Connection Manager version 1.0 does not support the SSL service. If SSL is enabled, you will be unable to manage the - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 25
access to the switch. The switch supports SNMP versions 1, 2, and 3. The Storage Management Initiative-Specification (SMI-S). The service provides an e-mail notification capability for the switch. This service has no relationship with the HP Call Home feature, which notifies only HP services Guide 25 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 26
information about port binding configuration, see the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. Connection security Connection security provides an encrypted data path for switch management methods. The switch supports the Secure Shell (SSH) protocol for the command - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 27
CLI command. For information about the create certificate CLI command, see the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. NOTE: Simple SAN Connection Manager version 1.0 does not support the SSL service. If SSL is enabled, you will be unable to manage the switch - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 28
Connection Manager application is a GUI-based management application for HP StorageWorks that runs on the management station. It provides be managed with Simple SAN Connection Manager, QuickTools, or the CLI. A switch supports a combined maximum of 19 logins, which are reserved as follows: • 4 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 29
42 • Configuring Call Home to HP Services (optional), page 42 Site requirements on the Microsoft Web site: http://support.microsoft.com/kb/932755. For SSCM on the Microsoft Web site: http://support.microsoft.com/kb/932755 • Windows Server HP StorageWorks PCI-e FC HBA 8/20q Fibre - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 30
document • One End User License Agreement (EULA) • HP StorageWorks 8/20q Fibre Channel Switch Rack-Mount Kit quick start installation instructions • HP StorageWorks 8/20q Fibre Channel Switch quick start installation instructions • One HP StorageWorks Simple SAN Connection Manager software CD • One - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 31
on page 65 for weight and dimensional specifications. Adhesive rubber feet are provided for kit is supported with the following HP custom racks only: • HP 9000 Series Rack • HP 10000 Series Rack • HP 10000 .) in back of the rack to allow for servicing and airflow. • If the device is mounted Guide 31 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 32
, such as screws, ship in plastic bags in the kit. See Table 8. Required tools: • #2 Phillips screwdriver • 7/16-inch wrench Verify the kit contents Check the contents of the 8/20q Fibre Channel Switch rack mount kit shipping carton to verify that all required parts and hardware are available (Table - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 33
holes, using two M6 machine screws. Figure 8 Installing the rear mounting brackets 4. Place the switch and rail assembly into the rack through the front, guiding the slotted-rail ends onto the threaded studs of the rear mounting brackets (Figure 9). Fit the posts on the front rail flanges in the - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 34
5. Fasten each rail flange to the front of the rack using two M6 machine screws (Figure 10). Figure 10 Fastening the rail to the front of the rack 6. Fasten each slotted-rail end to the rear mounting bracket using a flat washer and a 1/4-20 hex nut (Figure 11). Figure 11 Fastening the rail to the - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 35
connected to a device or another switch. SFPs are not included with the switch. Only HP SFPs are supported for use in the switch. To install an SFP transceiver, insert the transceiver into any : None • Stop Bits: 1 • Flow Control: None 8/20q Fibre Channel Switch Installation and Reference Guide 35 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 36
content. pr portdev/ttyS0 pu minit pu mreset pu mhangup b. Verify that all users have permission to run minicom. Review the /etc/minicom.users file and confirm that the line ALL exists or that there are specific Association (CSA). • For 250 Volt electrical service: The cable must be rated at 10 Amps - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 37
port connector. This requires a null modem F/F DB9 cable (Figure 13). This connection supports the CLI only. Indirect Ethernet Direct Ethernet RJ-45 Connection RJ-45 Connection Serial RS see the HP StorageWorks 8Gb Simple SAN Connection Kit quick start instructions. The Simple Reference Guide 37 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 38
Wizards menu and select Configuration Wizard. Follow the instructions to set the IP address and the password. Changing account name. See the passwd command in the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide For a Windows serial connection, open the HyperTerminal - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 39
disruptive activation. • The current firmware version supports the installation and non-disruptive activation of the , Telnet sessions must be restarted manually. TIP: After upgrading firmware that , see the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. 8/20q Fibre Channel - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 40
the remote host (FTP only) • Pathname for the firmware image file For information about the CLI commands, see the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. 1. Enter the following commands to download the firmware from a remote host to the switch, install the firmware - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 41
G_Port, GL_Port, F_Port, FL_Port, TR_Port, or Donor. 5. Connect the devices to the switch. 6. Make any necessary zoning changes. 8/20q Fibre Channel Switch Installation and Reference Guide 41 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 42
HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. Configuring Call Home to HP Services (optional) Call Home to HP Services is supported of OSEM and versions required OSEM collects and formats problem reports from various HP customer systems, including the 8/20q Fibre Channel - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 43
at no charge from the following HP websites: • For SIM at http: //www.hp.com/go/hpsim • For RSP at http://www.hp.com/go/ServiceEssentials • For OSEM at http://h18023.www1.hp.com/support/svctools/OSEM/index.html • For ISEE at http://www.hp.com/hps/tech/resources/elect/isee.htm RSP requirements - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 44
HP services To configure Call Home to HP services: 1. Make sure SIM and RSC, or ISEE are installed on a server that has Internet access. For software, installation instructions QuickTools, see the HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Management User Guide. To configure an - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 45
information about CLI commands, see the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. 4. Configure the switches in OSEM switch. For detailed instructions, see the OSEM documentation available at the web sites listed in "Installation instructions and documentation for SIM - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 46
46 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 47
4 Diagnostics and troubleshooting Diagnostic information about the switch is available through the switch LEDs and the port LEDs. Diagnostic necessary repairs. If the condition remains, contact your authorized maintenance provider. 8/20q Fibre Channel Switch Installation and Reference Guide 47 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 48
test on all ports • Access and integrity test on the Application-specific integrated circuit (ASIC) During the POST, the switch logs any errors more ports fail the POST, the entire switch is disabled. Whether the problem is critical or not, contact your authorized maintenance provider. If there are - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 49
switch. Make necessary corrections. If the condition remains, power down the switch and contact your authorized maintenance provider. 8/20q Fibre Channel Switch Installation and Reference Guide 49 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 50
E_Port: 1. Does the QuickTools event browser show an alarm about an invalid attach on the affected port? • Yes-If you have configured device security, review the ISL group in the active security set to ensure that the membership includes the necessary ports and that the secrets on all switches are - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 51
same name, but different membership. 6. Is the port connected to a switch that supports connection to a TR_Port of an 8/20q Fibre Channel Switch? • Yes-Configure the port threshold alarms, see the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. If the count for any - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 52
associated error using the show config threshold CLI command. See the show config threshold CLI command in the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. Are the thresholds and sample window correct? • Yes-Continue • No-Correct the alarm configuration. If the condition - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 53
• IP address is lost • Switch configuration becomes corrupt • Password is forgotten In these specific cases, you can recover the switch using maintenance mode. Maintenance mode temporarily returns the switch or power cycle the switch. 8/20q Fibre Channel Switch Installation and Reference Guide 53 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 54
must download logfile before resetting the switch. For information about downloading files from the switch, see the HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide. Removing the switch configuration in maintenance mode (option 5) The Remove Switch Config option deletes all - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 55
loads the Linux kernel into memory. Use this option only at the direction of your authorized maintenance provider. 8/20q Fibre Channel Switch Installation and Reference Guide 55 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 56
56 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 57
with the instruction manual, may HP systems equipped with a laser device comply with safety standards, including International Electrotechnical Commission (IEC) 825. With specific Allow only HP authorized service technicians to manual. 8/20q Fibre Channel Switch Installation and Reference Guide 57 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 58
conforming to the requirements contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. A label on the (Figure 16) or its equivalent may be located on the surface of the HP-supplied laser device or on the laser device installed in your product. Figure 16 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 59
label) Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany Japanese notice Korean notice Taiwan notice \ 8/20q Fibre Channel Switch Installation and Reference Guide 59 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 60
60 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 61
or static-dissipating floor mats. • Use conductive field service tools. • Use a portable field service kit with a folding static-dissipating work mat. If you do not have any of the suggested equipment for proper grounding, have an HP - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 62
62 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 63
66 General specifications Table 9 lists general specifications for the 8/20q Fibre Channel Switch. Table 9 General specifications Specification Fibre Channel protocols Fibre Channel classes of service Description , 16, and 20 ports. 8/20q Fibre Channel Switch Installation and Reference Guide 63 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 64
Table 9 General specifications (Continued) Specification Description Scalability Maximum 239 switches, depending on configuration. For the latest supported configurations, see the SAN Design Reference Guide available at http://www.hp.com/go/SANdesignguide. Maximum user ports > 475,000 ports - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 65
13 Electrical specifications Specification Description Operating voltage Power source loading (maximum) Heat output (maximum) Circuit protection 100 to 240 VAC; 50 to 60 Hz 1 A at 120 VAC/0.5 A at 240 VAC 100 watts Internally fused 8/20q Fibre Channel Switch Installation and Reference Guide 65 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 66
Environmental requirements To ensure proper operation, the switch must not be subjected to environmental conditions beyond those for which it was tested. The ranges specified in Table 14 identify the acceptable environment for both operating and non-operating conditions. Table 14 Environmental - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 67
69 • Factory zoning configuration, page 69 • Factory SNMP configuration, page 70 • Factory switch services configuration, page 70 • Factory DNS host name configuration, page 71 • Factory IP version 4 Config InteropMode Standard 8/20q Fibre Channel Switch Installation and Reference Guide 67 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 68
Factory port configuration Enter the show config port CLI command to display port configuration values. Table 16 Port configuration defaults Parameter Port Defaults AdminState Online LinkSpeed Auto PortType SymbolicName GL Port n, where n is the port number ALFairness False - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 69
to display zoning configuration values. Table 18 Zoning configuration defaults Parameter Default MergeAutoSave True DefaultZone Allow DiscardInactive False 8/20q Fibre Channel Switch Installation and Reference Guide 69 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 70
Location Description HP StorageWorks 8/20q Fibre Channel Switch ObjectID 1.3.6.1.4.1.3873 switch services configuration Enter the show setup services CLI command to display switch service configuration values. Table 20 Services configuration - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 71
configuration values. Table 23 IP version 6 Ethernet configuration defaults Parameter Default EthIPv6NetworkEnable True EthIPv6NetworkDiscovery Ndp EthIPv6NetworkAddress ::/64 EthIPv6GatewayAddress :: 8/20q Fibre Channel Switch Installation and Reference Guide 71 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 72
Factory event logging configuration Enter the show setup system logging CLI command to display the event logging configuration values. Table 24 Event logging configuration defaults Parameter Default LocalLogEnabled True RemotelogEnabled False RemoteLogHostAddress 10.0.0.254 Factory NTP - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 73
to display security configuration values. Table 28 Security configuration defaults Parameter Default AutoSave True FabricBindingEnabled False PortBindingEnabled False 8/20q Fibre Channel Switch Installation and Reference Guide 73 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 74
setup callhome CLI command to display call home configuration values. Table 29 Call Home service configuration defaults Parameters Default PrimarySMTPServerAddr 0.0.0.0 PrimarySMTPServerPort 25 PrimarySMTPServerEnabled False SecondarySMTPServerAddr 0.0.0.0 SecondarySMTPServerPort 25 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 75
in this guide or related to service that provides for switch management through third-party applications that Model (CIM) comply with the Storage Management Initiative-Specification F_Port Fabric port. A Fibre Channel switch port that supports a connection to a single server or storage device. - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 76
services. Fabric services A component of fabric security that provides for the control of inband management and SNMP on a switch. See Fabric security and Simple Network Management Protocol (SNMP). FC port Fibre Channel port FL_Port Fabric loop port. A Fibre Channel switch port that supports HP - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 77
Service (RADIUS) Secure shell (SSH) Secure socket layer (SSL) Security set Simple Network Management Protocol (SNMP) Simple SAN Connection Manager (SSCM) Small form-factor pluggable (SFP) Storage Management Initiative-Specification service that supports the a remote HP StorageWorks B-Series Guide 77 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 78
78 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 79
Call Home service configure to HP service 42 description 25 certificate 27 classes of service 63 HP web site 7 domain ID conflict 51 description 22 lock 22 E E_Port 15, 50 e-mail notification 25 environmental conditions 30 specifications name 41 description 18 service 25 firmware description 38 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 80
29, 30 HBA - See Host Bus Adapter Heartbeat LED 12, 48 heat output 65 help, obtaining 9, 10 HP services 42 storage web site 10 Subscriber's choice web site 9 technical support 9 humidity 30, 66 HyperTerminal application 35 I inband management 24 Input Power LED 47 installation 30 Inter-Fabric Zone - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 81
24 power up 36 recovery 53 reset 13, 55 services 24 shock 66 specifications 63 upgrade 14 vibration 66 symbols in text 8 System Fault LED 12, 48 system processor 64 T technical support, HP 9 Telnet service 24 temperature error 49 operating range 30, 66 text symbols 8 timeout values 51 TR_Port - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch Installation - Page 82
hardware-enforced 19 limits 20 82
HP StorageWorks
8/20q Fibre Channel Switch Installation and
Reference Guide
Part number: 5697-0314
Fourth edition: February 2010