HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch installation
HP StorageWorks 8/20q - Fibre Channel Switch Manual
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 8/20q manual content summary:
- HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 1
HP StorageWorks 8/20q Fibre Channel Switch installation and reference guide Part number: 5697-7519 Second edition: July 2008 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 2
from QLogic Corporation. All rights reserved. The information contained herein is subject to change without notice. The only warranties for HP products and services are or registered trademarks of Netscape Communications Corporation. 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 3
21 Multiple switch fabrics 21 Optimizing device performance 21 Domain ID, principal priority, and domain ID lock 22 Common topologies 22 Switch services 22 Security 24 User account security 24 IP security 24 Port binding 24 8/20q Fibre Channel Switch installation and reference guide 3 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 4
38 Custom firmware installation 39 Adding a switch to an existing fabric 39 Installing feature license keys 40 Configuring Call Home to HP Services (optional 40 Role of the Remote Support Software Manager 40 Role of OSEM and versions required 40 Installation instructions and documentation - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 5
defaults 63 Factory switch 66 Factory switch services configuration 66 Fibre Channel Switch 11 2 Switch LEDs and controls 12 3 Fibre Channel ports 14 4 Port LEDs 14 5 Ethernet port 16 6 Serial port and pin identification 16 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 6
28 7 8/20q Fibre Channel Switch rack mount kit hardware 30 8 General specifications 59 9 Maintainability features 60 10 Fabric management specifications 61 11 Switch physical dimensions 61 12 Electrical specifications 61 13 Environmental requirements 62 14 Switch configuration defaults 63 15 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 7
, performance, multiple switch fabrics, switch services, fabric security, and fabric management. • Installing and configuring an HP StorageWorks 8/20q Fibre Channel Switch • Diagnosing and troubleshooting switch problems • Intended audience This manual introduces users to the switch and explains its - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 8
Medium blue text: Figure 1 Medium blue, underlined text (http://www.hp.com) Bold font Italics font Monospace font Monospace, italic font Monospace, data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints and - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 9
of drivers, and firmware documentation updates as well as instant access to numerous other product resources. • After signing up, you can quickly locate your products by selecting Business support and then Storage under Product Category. 8/20q Fibre Channel Switch installation and reference guide 9 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 10
sites For other product information, see the following HP web sites: • http://www.hp.com • http://www.hp.com/go/storage • http://www.hp.com/support/ • http://www.docs.hp.com Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, please send - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 11
, see the HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide. • For information about Simple SAN Connection Manager, see the HP StorageWorks Simple SAN Connection Manager user guide. Figure 1 8/20q Fibre Channel Switch 8/20q Fibre Channel Switch installation and - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 12
LED blink patterns" on page 46. System fault LED (amber) The System Fault LED illuminates to indicate that a fault exists in the switch firmware or hardware. Fault conditions include POST errors, over-temperature conditions, and power supply malfunctions. The Heartbeat LED shows a blink code for - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 13
release the button. The Heartbeat LED illuminates continuously while the switch is in maintenance mode. To exit maintenance mode and return to normal operation, press and release the Maintenance button momentarily to reset the switch. 8/20q Fibre Channel Switch installation and reference guide 13 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 14
15 67 16 17 89 18 19 Figure 3 Fibre Channel ports The 8/20q Fibre Channel Switch comes from the factory as an 8- or 16-port switch, enabling ports 0-7 or 0-15 respectively. You can enable additional ports up to the 20-port maximum using the HP StorageWorks 8/20q 4-port Upgrade License. For more - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 15
Fibre Channel Switch supports SFP+ optical transceivers for the Fibre Channel Fibre Channel Switches. The 8/20q Fibre Channel Switch self-discovers all inter-switch connections. For more information, see "Multiple switch fabrics" on page 21. 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 16
3 RJ-45 Ethernet port 2 Link status LED Figure 5 Ethernet port Serial port The 8/20q Fibre Channel Switch is equipped with an RS-232 serial port for maintenance purposes (Figure 6). You can manage the switch through the serial port using the CLI. 2 1 1 Serial port Figure 6 Serial port and pin - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 17
the switch, plug the power cord into the switch AC receptacle (located on the back of the switch) and into a 100-240 VAC power source. Switch management The switch supports the (SMI-S), page 18 • File transfer protocols, page 18 8/20q Fibre Channel Switch installation and reference guide 17 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 18
, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. Simple Network Management Protocol SNMP provides monitoring and trap functions for the fabric. The switch firmware supports SNMP versions 1, 2, and 3, the Fibre Alliance Management Information Base (FA-MIB) version - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 19
, page 21 • Multiple switch fabrics, page 21 • Switch services, page 22 • Security, switches. • The transmission speeds of your HBAs and SFPs. The switch supports 2-Gb/s, 4-Gb/s and 8-Gb/s transmission speeds. IMPORTANT: Setting a Fibre Channel Fibre Channel Switch installation and reference guide 19 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 20
in a zone (2,000). MaxMembersPerAlias Maximum number of members in an alias (2,000) Performance The 8/20q Fibre Channel Switch supports class 2 and class 3 Fibre Channel service at transmission rates of 8-Gb/s with a maximum frame size of 2,148 bytes. Related performance characteristics include - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 21
8/20q Fibre Channel Switches together in a wide variety of topologies. When planning your fabric, consider your topology and cabling requirements. For more information about Storage Area Network (SAN) connectivity, see the SAN design reference guide available at the HP website: http://www.hp.com/go - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 22
set to 254. For information about changing the default domain ID, domain ID lock, and principal priority parameters, see the set config switch command in the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. If you connect a new switch to an existing fabric with its domain ID - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 23
switch and the workstation. Enabling SSL automatically creates a security certificate on the switch. The default is disabled. NOTE: Simple SAN Connection Manager version 1.0 does not support the SSL service status and trend analysis. 8/20q Fibre Channel Switch installation and reference guide 23 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 24
more informaton about RADIUS server configuration, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. NOTE: If the same user account exists on a switch and its RADIUS server, that user can login with either password, but the authority and account expiration will always - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 25
the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. NOTE: Simple SAN Connection Manager version 1.0 does not support the SSL service. authenticate user logins with a RADIUS server. For more information, see "Connection security" on page 24. Consider the devices, switches, and - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 26
HP StorageWorks that runs on the management station. It provides basic automated configuration and management of switches, HBAs, and storage devices. Switch switch firmware and provide for the management of individual switches in a single fabric. Consider how many fabrics and switches switch supports - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 27
6.0 and later Mozilla 1.5 and later Firefox 1.0 and later Java Runtime Environment 1.5 or higher Hardware CD ROM drive RJ-45 Ethernet port PCI-e slots for the HP StorageWorks PCI-e FC HBA 8/20q Fibre Channel Switch installation and reference guide 27 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 28
-Me-First document • One End User License Agreement (EULA) • HP StorageWorks 8/20q Fibre Channel Switch Rack-Mount Kit quick start installation instructions • HP StorageWorks 8/20q Fibre Channel Switch quick start installation instructions • One HP StorageWorks Simple SAN Connection Manager software - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 29
same AC supply circuit may overload that circuit or the AC supply wiring. Consider the power source capacity and the total power usage of all switches on the circuit. • Reliable grounding in the rack must be maintained. 8/20q Fibre Channel Switch installation and reference guide 29 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 30
the required items NOTE: The rack mount kit installation requires one technician. Locate the following items and set them aside: • 8/20q Fibre Channel Switch • 8/20q Fibre Channel Switch rack-mount kit • Smaller items, such as screws, ship in plastic bags in the kit. See Table 7. Required tools - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 31
posts on the front rail flanges in the holes between the two cage-nuts on each of the front vertical rack posts. Figure 9 Installing the switch and rail assembly 8/20q Fibre Channel Switch installation and reference guide 31 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 32
5. Fasten each rail flange to the front of the rack using two M6 machine screws (Figure 10). Figure 10 Fastening the rail to the front of the rack 6. Fasten each slotted-rail end to the rear mounting bracket using a flat washer and a 1/4-20 hex nut (Figure 11). Figure 11 Fastening the rail to the - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 33
switch has eight (ports 0-7) or sixteen (ports 0-15) active ports depending on the model. Additional ports can be activated with the HP StorageWorks for Ethernet connections The default IP address of a new switch is 10.0.0.1. To : None 8/20q Fibre Channel Switch installation and reference guide 33 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 34
service: The cable must be rated at 10 Amps, meet the requirements of H05VV-F, and be approved by Verband der Elektrotechnik (VDE), SEMKO, and DEMKO. To power up a 8/20q Fibre Channel Switch The POST tests the condition of firmware, memories, data-paths, and switch logic circuitry. If the Heartbeat - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 35
and enter the default IP address 10.0.0.1 to start the QuickTools web applet. 2. Log in to the switch using the default user name (admin) and password (password). 3. Obtain the IP address and subnet mask from your network administrator. 8/20q Fibre Channel Switch installation and reference guide 35 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 36
to the switch with default account name and password (admin/password). telnet 10.0.0.1 Switch Login: admin Password: ******* NOTE: To insure user account security, you should change the password for the Admin account name. See the passwd command in the HP StorageWorks 8/20q Fibre Channel Switch - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 37
file, then enter the hotreset command to perform a non-disruptive activation. See "Custom firmware installation" on page 39. For information about the CLI commands, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 8/20q Fibre Channel Switch installation and reference - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 38
IP address of the remote host • An account name and password on the remote host (FTP only) • Pathname for the firmware image file For information about the CLI commands, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 1. Enter the following commands to download the - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 39
-switch links (ISL), but do not connect the devices. 4. Configure the port types for the new switch. The ports can be G_Port, GL_Port, F_Port, FL_Port, or Donor. 5. Connect the devices to the switch. 6. Make any necessary zoning changes. 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 40
the command line interface, see the feature command in the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. Configuring Call Home to HP Services (optional) Call Home to HP Services is supported for the 8/20q Fibre Channel Switch. • If you have already configured Call Home to - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 41
, Versions 1.0.2, 1.5, and 2.0 Applications: • Java Virtual Machine plug-in for Internet Explorer NOTE: Java plug-in is not installed by default in the Internet Explorer Web Browser for 32-bit and x64 editions of Windows Server 2003. 8/20q Fibre Channel Switch installation and reference guide 41 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 42
HP services To configure Call Home to HP services: 1. Make sure SIM and RSC, or ISEE are installed on a server that has Internet access. For software, installation instructions by OSEM (the OSEM default trap port is 162 HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 43
, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 4. Configure the switches in OSEM by adding each 8/20q Fibre Channel Switch as a Managed System configured with System Type set to FC Switch and the IP address for the switch. For detailed instructions, see the - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 44
44 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 45
4 Diagnostics and troubleshooting Diagnostic information about the switch is available through the switch LEDs and the port LEDs. Diagnostic information is repairs. If the condition remains, contact your authorized maintenance provider. 8/20q Fibre Channel Switch installation and reference guide 45 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 46
• Checksum tests on the boot firmware in Programmable read-only memory (PROM) and the switch firmware in flash memory • Internal data . If two or more ports fail the POST, the entire switch is disabled. Whether the problem is critical or not, contact your authorized maintenance provider. If - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 47
remains, continue. 2. Consider the ambient air temperature near the switch and clearance around the switch. Make necessary corrections. If the condition remains, power down the switch and contact your authorized maintenance provider. 8/20q Fibre Channel Switch installation and reference guide 47 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 48
review the ISL group in the active security set to ensure that the membership includes the necessary ports and that the secrets on all switches are correct. • No-Continue. 2. Does the QuickTools event browser show a repeating alarm about an unsupported E_Port command on the affected port? • Yes-The - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 49
membership. Excessive port errors The switch can monitor a set of port errors and generate alarms based on user-defined sample windows and thresholds. by default. For information about managing port threshold alarms, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. If - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 50
the port and the SFP. For information about testing ports, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide or the HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide. Does the port pass the test? • Yes-Continue • No-Replace the SFP - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 51
on page 63. Resetting user accounts in maintenance mode (option 3) The Reset User Accounts to Default option restores the password for the Admin account name to the default (password) and removes all other user accounts from the switch. 8/20q Fibre Channel Switch installation and reference guide 51 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 52
files from the switch, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. Removing the switch configuration in maintenance mode (option 5) The Remove Switch Config option deletes all configurations from the switch except the default configuration. This restores - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 53
in accordance with the instruction manual, may cause harmful the laser device enclosure. There are no user-serviceable components inside. • Do not operate herein. • Allow only HP authorized service technicians to repair the manual. 8/20q Fibre Channel Switch installation and reference guide 53 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 54
Fibre Channel communications port. In the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements contained in the Department of Health and Human Services equivalent may be located on the surface of the HP-supplied laser device or on the laser device installed - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 55
if applicable- refer to the product label) Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany Japanese notice Korean notice Taiwan notice \ 8/20q Fibre Channel Switch installation and reference guide 55 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 56
56 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 57
field service tools. • Use a portable field service kit with HP authorized reseller install the part. NOTE: For more information on static electricity, or for assistance with product installation, contact your HP authorized reseller. 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 58
58 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 59
20q Fibre Channel Switch. Table 8 General specifications Specification Description Fibre Channel protocols Fibre Channel classes of service FC-PH Rev. 4.3 FC-PH-2 FC-PH-3 FC-AL Rev 4.6 FC-AL-2 Rev 7.0 FC-FLA FC-GS FC-GS-2 FC-GS-3 FC-FG FC-SW-2 FC-Tape FC-VI Fibre Alliance MIB Version 4.0 Fibre - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 60
specifications (Continued) Specification Description Scalability Maximum 239 switches, depending on configuration. For the latest supported configurations, see the SAN Design Reference Guide available at http://www.hp.com/go/SANdesignguide. Maximum user ports > 475,000 ports depending on - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 61
Fibre Channel Switch. Table 10 Fabric management specifications Specification Description Management methods Command Line Interface FTP GS-3 Management Server Simple SAN Connection Manager graphical user 100 watts Internally fused 8/20q Fibre Channel Switch installation and reference guide 61 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 62
Environmental requirements To ensure proper operation, the switch must not be subjected to environmental conditions beyond those for which it was tested. The ranges specified in Table 13 identify the acceptable environment for - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 63
FDMIEnabled True FDMIEntries 1,000 DefaultDomainID 1 (0x Hex) DomainIDLock False SymbolicName 8/20q FC Switch R_A_TOV 10000 E_D_TOV 2000 PrincipalPriority 254 ConfigDescription Default Config InteropMode Standard 8/20q Fibre Channel Switch installation and reference guide 63 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 64
configuration Enter the show config port CLI command to display port configuration values. Table 15 Port configuration defaults Parameter Port Defaults AdminState Online LinkSpeed Auto PortType GL SymbolicName Port n, where n is the port number ALFairness False DeviceScanEnabled True - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 65
Factory zoning configuration Enter the show config zoning CLI command to display zoning configuration values. Table 17 Zoning configuration defaults Parameter Default MergeAutoSave True DefaultZone Allow DiscardInactive False 8/20q Fibre Channel Switch installation and reference guide 65 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 66
SNMP configuration values. Table 18 SNMP configuration defaults Parameter Default SNMPEnabled True Contact Location Description HP StorageWorks 8/20q Fibre Channel Switch ObjectID 1.3.6.1.4.1.3873.1.11 AuthFailureTrap False ProxyEnabled - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 67
IP version 6 Ethernet configuration values. Table 22 IP version 6 Ethernet configuration defaults Parameter Default EthIPv6NetworkEnable True EthIPv6NetworkDiscovery Ndp EthIPv6NetworkAddress ::/64 EthIPv6GatewayAddress :: 8/20q Fibre Channel Switch installation and reference guide 67 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 68
setup system logging CLI command to display the event logging configuration values. Table 23 Event logging configuration defaults Parameter Default LocalLogEnabled True RemotelogEnabled False RemoteLogHostAddress 10.0.0.254 Factory NTP server configuration Enter the show setup system ntp - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 69
configuration Enter the show config security CLI command to display security configuration values. Table 27 Security configuration defaults Parameter Default AutoSave True FabricBindingEnabled False PortBindingEnabled False 8/20q Fibre Channel Switch installation and reference guide 69 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 70
to display call home configuration values. Table 28 Call Home service configuration defaults Parameters Default PrimarySMTPServerAddr 0.0.0.0 PrimarySMTPServerPort 25 PrimarySMTPServerEnabled False SecondarySMTPServerAddr 0.0.0.0 SecondarySMTPServerPort 25 SecondarySMTPServerEnabled - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 71
Domain ID User-defined number that identifies the switch in the fabric. E_Port Expansion port. A Fibre Channel port that connects to another switch. Event log Log of messages describing events that occur in the fabric. F_Port Fabric port. A Fibre Channel switch port that supports a connection - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 72
Management Protocol (SNMP). FC port Fibre Channel port FL_Port Fabric loop port. A Fibre Channel switch port that supports a connection to up to 126 server or storage devices. Flash memory Memory on the switch that contains the switch control firmware. Frame Data unit consisting of start - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 73
grouped together. The active zone set defines the zoning for a fabric. See Zone. Zoning database The set of zone sets, zones, and aliases stored on a switch. See Alias, Zone, and Zone set. 8/20q Fibre Channel Switch installation and reference guide 73 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 74
74 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 75
Unit 60 File Transfer Protocol account name 39 description 18 service 23 firmware description 36 failure 46 install with CLI 37, 38 install with QuickTools 37 non-disruptive activation 37 unpack image 51 FL_Port 15 flash memory 13 8/20q Fibre Channel Switch installation and reference guide 75 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 76
O Open Service Event Manager 40 operating systems 27, 28 over-temperature 47 P password file reset 51 maintenance mode 50 restore default 51 performance device 21 switch 20 planning 19 port binding 24 buffer credits 20 characteristics 59 diagnostics 48 Ethernet 16 fabric 15 Fibre Channel 14 generic - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 77
10 HP Subscriber's choice 9 workstation configuration 33 connecting 35 IP address 33 operating system 16 requirements 27 Z zone conflict 49 definition 19 zone set active 19 definition 19 zoning database 20 hardware-enforced 19 limits 20 8/20q Fibre Channel Switch installation and reference guide 77 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 78
HP StorageWorks
8/20q Fibre Channel Switch installation and
reference guide
Part number: 5697-7519
Second edition: July 2008