HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch installation
HP StorageWorks 8/20q - Fibre Channel Switch Manual
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 8/20q manual content summary:
- HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 1
HP StorageWorks 8/20q Fibre Channel Switch installation and reference guide Part number: 5697-7758 Third edition: January 2009 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 2
from QLogic Corporation. All rights reserved. The information contained herein is subject to change without notice. The only warranties for HP products and services trademarks or registered trademarks of Netscape Communications Corporation. 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 3
Multiple switch fabrics 21 Optimizing device performance 21 Domain ID, principal priority, and domain ID lock 22 Common topologies 22 Transparent routing 23 Switch services 24 Security 26 User account security 26 IP security 26 8/20q Fibre Channel Switch installation and reference guide 3 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 4
firmware installation 40 Custom firmware installation 41 Adding a switch to an existing fabric 41 Installing feature license keys 42 Configuring Call Home to HP Services (optional 42 Role of the Remote Support Software Manager 42 Role of OSEM and versions required 42 Installation instructions - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 5
RADIUS configuration 73 Factory security configuration 73 Factory Call Home configuration 74 Glossary 75 Index 79 Figures 1 8/20q Fibre Channel Switch 11 2 Switch LEDs and controls 12 3 Fibre Channel ports 14 4 Port LEDs 14 8/20q Fibre Channel Switch installation and reference guide 5 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 6
20q Fibre Channel Switch rack mount kit hardware 32 9 General specifications 63 10 Maintainability features 64 11 Fabric management specifications 65 12 Switch physical dimensions 65 13 Electrical specifications 65 14 Environmental requirements 66 15 Switch configuration defaults 67 16 Port - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 7
for users who are responsible for installing and servicing network equipment. Related documentation In addition to this guide, please refer to other documents for this product: • HP StorageWorks 8/20q Fibre Channel Switch quick start installation instructions • HP StorageWorks 8Gb Simple SAN - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 8
text (http://www.hp.com) Bold font Italics font Monospace font Monospace, italic font Monospace, bold font Element Cross-reference links and e-mail addresses IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 9
of drivers, and firmware documentation updates as well as instant access to numerous other product resources. • After signing up, you can quickly locate your products by selecting Business support and then Storage under Product Category. 8/20q Fibre Channel Switch installation and reference guide 9 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 10
sites For other product information, see the following HP web sites: • http://www.hp.com • http://www.hp.com/go/storage • http://www.hp.com/support/ • http://www.docs.hp.com Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, please send - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 11
HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide. • For information about Simple SAN Connection Manager, see the HP StorageWorks Simple SAN Connection Manager user guide. Figure 1 8/20q Fibre Channel Switch 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 12
port LEDs, see "Port LEDs" on page 14. The Maintenance button (Figure 2) is the only switch control. It is used to reset a switch or to recover a disabled switch. To apply power to the switch, plug the power cord into the switch a fault exists in the switch firmware or hardware. Fault conditions - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 13
release the button. The Heartbeat LED illuminates continuously while the switch is in maintenance mode. To exit maintenance mode and return to normal operation, press and release the Maintenance button momentarily to reset the switch. 8/20q Fibre Channel Switch installation and reference guide 13 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 14
3 Fibre Channel ports The 8/20q Fibre Channel Switch comes from the factory as an 8- or 16-port switch, enabling ports 0-7 or 0-15 respectively. You can enable additional ports up to the 20-port maximum using the HP StorageWorks 8/20q 4-port Upgrade License. For more information, see "Installing - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 15
HP StorageWorks B-series remote fabric. The TR_Port provides transparent communication between local fabric devices and remote fabric devices while maintaining separate fabrics. For more information, see "Transparent routing" on page 23. 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 16
when data is being transmitted or received over the Ethernet connection. 12 3 1 Activity LED 3 RJ-45 Ethernet port 2 Link status LED Figure 5 Ethernet port Serial port The 8/20q Fibre Channel Switch is equipped with an RS-232 serial port for maintenance purposes (Figure 6). You can manage the - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 17
applet, page 18 • Simple SAN Connection Manager, page 18 • Command line interface, page 18 • Simple Network Management Protocol, page 18 • Storage Management Initiative-Specification (SMI-S), page 18 • File transfer protocols, page 18 8/20q Fibre Channel Switch installation and reference guide 17 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 18
For more information, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. Simple Network Management Protocol SNMP provides monitoring and trap functions for the fabric. The switch firmware supports SNMP versions 1, 2, and 3, the Fibre Alliance Management Information Base - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 19
a group by creating an alias. A zone can be a component of more than one zone set. Several zone sets can be defined for a fabric, but only one zone set can be active at one time. The active zone set determines the current fabric zoning. 8/20q Fibre Channel Switch installation and reference guide 19 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 20
an alias (2,000) Performance The 8/20q Fibre Channel Switch supports class 2 and class 3 Fibre Channel service at transmission rates of 8-Gb/s with Fibre Channel port is supported by a data buffer with a 16 credit capacity; that is, 16 maximum sized frames. For fibre optic cables, this enables full - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 21
of your switch and fabric as your needs grow. The HP StorageWorks 8/20q 4-port Upgrade License activates additional Fibre Channel ports to 12, 16, or 20 ports. Applying a device • A high performance server and slow tape storage device 8/20q Fibre Channel Switch installation and reference guide 21 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 22
set config switch command in the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. If you connect a new switch to an existing fabric with its Area Network (SAN) connectivity, see the SAN design reference guide available at the HP website: http://www.hp.com/go/SANdesignguide. - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 23
where existing port connections to remote fabrics have isolated. For remote HP StorageWorks B-series fabrics, the switch to which the TR_Port connects must support N-Port ID Virtualization (NPIV) and the interoperability mode must be 8/20q Fibre Channel Switch installation and reference guide 23 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 24
of HP StorageWorks B-series switches, will make the necessary zoning changes to the remote fabric. When modifications to the active zoning on both fabrics are complete, the transparent routing connection becomes active, and the local devices will discover the remote devices. Switch services You - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 25
that will initiate a message. In addition, you can configure periodic event data collection and processing through the Tech_Support_Center profile for automated status and trend analysis. 8/20q Fibre Channel Switch installation and reference guide 25 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 26
binding. For more information about port binding configuration, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. Connection security Connection security provides an encrypted data path for switch management methods. The switch supports the Secure Shell (SSH) protocol - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 27
CLI command, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. NOTE: Simple SAN Connection Manager version 1.0 does not support the SSL service. If SSL is enabled, you will be unable to manage the switch using this version of Simple SAN Connection Manager. Consider - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 28
Fabric management The Simple SAN Connection Manager application is a GUI-based management application for HP StorageWorks that runs on the management station. It provides basic automated configuration and management of switches, HBAs, and storage devices. Switch management functions include IP - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 29
Explorer 5.0 or later Netscape Navigator 6.0 and later Mozilla 1.5 and later Firefox 1.0 and later Java Runtime Environment 1.5 or higher Hardware CD ROM drive RJ-45 Ethernet port PCI-e slots for the HP StorageWorks PCI-e FC HBA 8/20q Fibre Channel Switch installation and reference guide 29 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 30
-First document • One End User License Agreement (EULA) • HP StorageWorks 8/20q Fibre Channel Switch Rack-Mount Kit quick start installation instructions • HP StorageWorks 8/20q Fibre Channel Switch quick start installation instructions • One HP StorageWorks Simple SAN Connection Manager software CD - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 31
same AC supply circuit may overload that circuit or the AC supply wiring. Consider the power source capacity and the total power usage of all switches on the circuit. • Reliable grounding in the rack must be maintained. 8/20q Fibre Channel Switch installation and reference guide 31 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 32
kit installation requires one technician. Locate the following items and set them aside: • 8/20q Fibre Channel Switch • 8/20q Fibre Channel Switch rack-mount kit • Smaller items, such as screws, ship in plastic bags in the kit. See Table 8. Required tools: • #2 Phillips screwdriver • 7/16-inch - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 33
the rails are on the power-supply side (not the SFP-port side) of the switch. Figure 7 Attaching the rails to the switch 3. On the rack vertical posts, mark the holes that rack posts. Figure 9 Installing the switch and rail assembly 8/20q Fibre Channel Switch installation and reference guide 33 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 34
rail to the rear mounting bracket 7. Optional: Fasten the filler panel to the rear mounting brackets with two M6 machine screws (Figure 12). Figure 12 Installing the filler panel 34 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 35
the model. Additional ports can be activated with the HP StorageWorks 8/20q 4-port Upgrade License. For more information, see "Installing feature license keys" on page 42. Configure the workstation NOTE: If you plan to use Simple SAN Connection Manager or QuickTools to manage the switch, proceed to - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 36
Canadian Standards Association (CSA). • For 250 Volt electrical service: The cable must be rated at 10 Amps, meet the requirements of H05VV-F, and be approved by Verband der Elektrotechnik (VDE), SEMKO, and DEMKO. To power up a 8/20q Fibre Channel Switch, attach the AC power cord to the receptacle - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 37
and enter the default IP address 10.0.0.1 to start the QuickTools web applet. 2. Log in to the switch using the default user name (admin) and password (password). 3. Obtain the IP address and subnet mask from your network administrator. 8/20q Fibre Channel Switch installation and reference guide 37 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 38
name and password (admin/password). telnet 10.0.0.1 Switch Login: admin Password: ******* NOTE: To insure user account security, you should change the password for the Admin account name. See the passwd command in the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide For - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 39
enter the hotreset command to perform a non-disruptive activation. See "Custom firmware installation" on page 41. For information about the CLI commands, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 8/20q Fibre Channel Switch installation and reference guide 39 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 40
the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 1. Enter the following commands to download the firmware from a remote host to the switch, install the firmware, then reset the switch to activate the firmware. 8/20q FC Switch #> admin start 8/20q FC Switch #> firmware - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 41
(ISL), but do not connect the devices. 4. Configure the port types for the new switch. The ports can be G_Port, GL_Port, F_Port, FL_Port, TR_Port, or Donor. 5. Connect the devices to the switch. 6. Make any necessary zoning changes. 8/20q Fibre Channel Switch installation and reference guide 41 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 42
upgrade to complete. To upgrade a switch using the command line interface, see the feature command in the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. Configuring Call Home to HP Services (optional) Call Home to HP Services is supported for the 8/20q Fibre Channel Switch - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 43
SMB, with SP1 • Microsoft Windows 2003 Server with installed Multilingual User Interface Pack (MUI) • Microsoft Windows 2003 Server installed by default in the Internet Explorer Web Browser for 32-bit and x64 editions of Windows Server 2003. 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 44
and comma (,). j. Click OK to enable the changes. For more information about QuickTools, see the HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide. To configure an SNMP trap using the CLI: a. Telnet to the IP address of the switch from a server that has LAN access - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 45
Type set to FC Switch and the IP address for the switch. For detailed instructions, see the OSEM documentation available at the web sites listed in "Installation instructions and documentation for SIM, RSP, OSEM, and ISEE" on page 43. 8/20q Fibre Channel Switch installation and reference guide 45 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 46
46 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 47
troubleshooting Diagnostic information about the switch is available through the switch LEDs and the port LEDs. Diagnostic information is also available through the CLI, QuickTools, or Simple SAN your authorized maintenance provider. 8/20q Fibre Channel Switch installation and reference guide 47 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 48
switch to operate, but disables the ports that have errors. If two or more ports fail the POST, the entire switch is disabled. Whether the problem is the following conditions: • 1 blink-Normal operation • 2 blinks-Internal firmware failure blink pattern, page 48 • 3 blinks-Fatal POST error blink - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 49
remains, continue. 2. Consider the ambient air temperature near the switch and clearance around the switch. Make necessary corrections. If the condition remains, power down the switch and contact your authorized maintenance provider. 8/20q Fibre Channel Switch installation and reference guide 49 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 50
? • Yes-If you have configured device security, review the ISL group in the active security set to ensure that the membership includes the necessary ports and that the secrets on all switches are correct. • No-Continue. 2. Does the QuickTools event browser show a repeating alarm about an unsupported - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 51
port, changing its operational state to "down." Port errors can be caused by the following: • Triggers are too low or the sample window is too small • Faulty Fibre Channel port cable • Faulty SFP • Faulty port • Faulty device or HBA 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 52
loopback test to validate the port and the SFP. For information about testing ports, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide or the HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide. Does the port pass the test? • Yes-Continue - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 53
the current Maintenance menu session. To log in again, enter the maintenance mode account name (prom) and password (prom). To return to normal operation, momentarily press and release the Maintenance button or power cycle the switch. 8/20q Fibre Channel Switch installation and reference guide 53 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 54
to the workstation, however, you must download logfile before resetting the switch. For information about downloading files from the switch, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. Removing the switch configuration in maintenance mode (option 5) The Remove - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 55
exits maintenance mode, and reboots the switch using the current switch configuration. All unpacked firmware image files that reside on the switch are deleted. Updating the boot loader direction of your authorized maintenance provider. 8/20q Fibre Channel Switch installation and reference guide 55 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 56
56 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 57
not installed and used in accordance with the instruction manual, the laser device enclosure. There are no user-serviceable components inside. • Do not operate herein. • Allow only HP authorized service technicians to repair the manual. 8/20q Fibre Channel Switch installation and reference guide 57 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 58
fiber optic (FO) transceiver for connection to the Fibre Channel communications port. In the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. A label on the - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 59
telecomunications products. *Notified body number (used only if applicable- refer to the product label) Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany Japanese notice Korean notice Taiwan notice \ 8/20q Fibre Channel Switch installation and reference guide 59 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 60
60 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 61
any of the suggested equipment for proper grounding, have an HP authorized reseller install the part. NOTE: For more information on static electricity, or for assistance with product installation, contact your HP authorized reseller. 8/20q Fibre Channel Switch installation and reference guide 61 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 62
62 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 63
F_Port, FL_Port, E_Port, TR_Port Port characteristics All ports are auto-discovering and self-configuring. Number of Fibre Channel ports Available as 8-port and 16-port base models with license key upgrades to 12, 16, and 20 ports. 8/20q Fibre Channel Switch installation and reference guide 63 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 64
user ports > 475,000 ports depending on configuration. For the latest supported configurations, see the SAN Design Reference Guide available at http://www.hp.com/go/SANdesignguide. Buffer credits 16 buffer credits per port, ASIC embedded memory Media type SFP optical transceiver Fabric port - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 65
(maximum) Heat output (maximum) Circuit protection Description 100 to 240 VAC; 50 to 60 Hz 1 A at 120 VAC/0.5 A at 240 VAC 100 watts Internally fused 8/20q Fibre Channel Switch installation and reference guide 65 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 66
14 Environmental requirements Condition Acceptable range during operation Acceptable range during non-operation Temperature 0° to 40°C (32° to 104°F) -40° to 70°C (-40° to 158°F) Humidity Altitude 15% to 80%, non-condensing 5% to 90%, non-condensing 3,048 m (10,000 feet) above sea level 15 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 67
FDMIEnabled True FDMIEntries 1,000 DefaultDomainID 1 (0x Hex) DomainIDLock False SymbolicName 8/20q FC Switch R_A_TOV 10000 E_D_TOV 2000 PrincipalPriority 254 ConfigDescription Default Config InteropMode Standard 8/20q Fibre Channel Switch installation and reference guide 67 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 68
configuration Enter the show config port CLI command to display port configuration values. Table 16 Port configuration defaults Parameter Port Defaults AdminState Online LinkSpeed Auto PortType GL SymbolicName Port n, where n is the port number ALFairness False DeviceScanEnabled True - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 69
. Table 17 Port threshold alarm configuration defaults Parameter Default ThresholdMonitoringEnabled False CRCErrorsMonitoringEnabled defaults Parameter Default MergeAutoSave True DefaultZone Allow DiscardInactive False 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 70
HP StorageWorks 8/20q Fibre Channel Switch ObjectID 1.3.6.1.4.1.3873.1.11 AuthFailureTrap False ProxyEnabled True SNMPv3Enabled False Trap [1-5] Address Trap [1-5] Port Trap 1: 10.0.0.254 Traps 2-5: 0.0.0.0 162 Trap [1-5] Severity Warning Trap [1-5] Version 2 Trap [1-5] Enabled - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 71
the IP version 6 Ethernet configuration values. Table 23 IP version 6 Ethernet configuration defaults Parameter Default EthIPv6NetworkEnable True EthIPv6NetworkDiscovery Ndp EthIPv6NetworkAddress ::/64 EthIPv6GatewayAddress :: 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 72
the show setup system logging CLI command to display the event logging configuration values. Table 24 Event logging configuration defaults Parameter Default LocalLogEnabled True RemotelogEnabled False RemoteLogHostAddress 10.0.0.254 Factory NTP server configuration Enter the show setup - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 73
configuration Enter the show config security CLI command to display security configuration values. Table 28 Security configuration defaults Parameter Default AutoSave True FabricBindingEnabled False PortBindingEnabled False 8/20q Fibre Channel Switch installation and reference guide 73 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 74
to display call home configuration values. Table 29 Call Home service configuration defaults Parameters Default PrimarySMTPServerAddr 0.0.0.0 PrimarySMTPServerPort 25 PrimarySMTPServerEnabled False SecondarySMTPServerAddr 0.0.0.0 SecondarySMTPServerPort 25 SecondarySMTPServerEnabled - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 75
server or storage device. Fabric device An interface by which device host bus adapters (HBAs) can be managed through the management interface fabric. (FDMI) Fabric management switch The switch through which the fabric is managed. 8/20q Fibre Channel Switch installation and reference guide 75 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 76
Network Management Protocol (SNMP). FC port Fibre Channel port FL_Port Fabric loop port. A Fibre Channel switch port that supports a connection to up to 126 server or storage devices. Flash memory Memory on the switch that contains the switch control firmware. Frame Data unit consisting of - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 77
exists in the switch firmware or hardware. Target A storage device that responds to an initiator device. TR_Port Transparent routing port. A port type that uses the Fibre Channel industry standard NPIV to provide access to devices on a remote HP StorageWorks B-series fabric. User account An - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 78
78 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 79
Unit 64 File Transfer Protocol account name 41 description 18 service 25 firmware description 38 failure 48 install with CLI 39, 40 install with QuickTools 39 non-disruptive activation 39 unpack image 54 FL_Port 15 flash memory 13 8/20q Fibre Channel Switch installation and reference guide 79 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 80
over-temperature 49 P password file reset 54 maintenance mode 53 restore default 54 performance device 21 switch 20 planning 19 port binding 26 buffer credits 20 characteristics 63 diagnostics 50 Ethernet 16 fabric 15 Fibre Channel 14 generic 15 LEDs 14 maximum number of ports/users 64 number of 63 - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 81
HP documentation 7 HP storage 10 HP Subscriber's choice 9 workstation configuration 35 connecting 37 IP address 35 operating system 16 requirements 29 Z zone conflict 51 definition 19 zone set active 19 definition 19 zoning database 20 8/20q Fibre Channel Switch installation and reference guide - HP StorageWorks 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation - Page 82
hardware-enforced 19 limits 20 82
HP StorageWorks
8/20q Fibre Channel Switch installation and
reference guide
Part number: 5697-7758
Third edition: January 2009