HP StorageWorks 8/20q HP StorageWorks Simple SAN Connection Manager 2.10 relea
HP StorageWorks 8/20q - Fibre Channel Switch Manual
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 8/20q manual content summary:
- HP StorageWorks 8/20q | HP StorageWorks Simple SAN Connection Manager 2.10 relea - Page 1
HP StorageWorks Simple SAN Connection Manager 2.10 release notes Part number: 5697-7756 Fifth edition: January 2009 - HP StorageWorks 8/20q | HP StorageWorks Simple SAN Connection Manager 2.10 relea - Page 2
L.P. Confidential computer software. Valid license from HP required for possession, use or copying. HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - HP StorageWorks 8/20q | HP StorageWorks Simple SAN Connection Manager 2.10 relea - Page 3
devices supported ...4 Operating system ...4 Prerequisites ...4 System requirements ...4 Installation instructions ...5 Important information ...5 Installation issues ...5 EVA-specific issues ...6 MSA1x00-specific issues ...6 Switch issues ...6 Other issues ...7 HP StorageWorks Simple SAN Connection - HP StorageWorks 8/20q | HP StorageWorks Simple SAN Connection Manager 2.10 relea - Page 4
devices: • HP StorageWorks 8/20q Fibre Channel Switch • HP StorageWorks EVA4x00/6x00/8x00 with XCS 6.110 or later • HP StorageWorks EVA4400 • HP StorageWorks MSA1x00 with V7.00 or later firmware • HP StorageWorks MSA2000fc Operating system The Simple SAN Connection Manager supports Microsoft Windows - HP StorageWorks 8/20q | HP StorageWorks Simple SAN Connection Manager 2.10 relea - Page 5
one Ethernet port • One or more PCI-e slots for the HP StorageWorks 81Q PCI-e Fibre Channel HBA (or other supported QLogic FC HBA) • Java Runtime Environment (JRE) 1.5 or later • Internet browser: Microsoft Internet Explorer (IE), Netscape Navigator, or Mozilla Firefox Installation instructions For - HP StorageWorks 8/20q | HP StorageWorks Simple SAN Connection Manager 2.10 relea - Page 6
configuration (such as a host or port that has been physically removed) is supported. • EVA login account: If the EVA login user name is changed, use the HP VDS Configuration Utility for EVA to re-enter the new user name and password. This utility is installed with the EVA VDS hardware provider and - HP StorageWorks 8/20q | HP StorageWorks Simple SAN Connection Manager 2.10 relea - Page 7
the default generic switch name, and any switch operation that you request will prompt for the password. • SSCM shows switch zoning information as Unknown for vendor and device type: The SSCM uses the switch zoning component Fibre Channel worldwide port name (WWPN) to match the vendor and device - HP StorageWorks 8/20q | HP StorageWorks Simple SAN Connection Manager 2.10 relea - Page 8
zoning in SSCM with a null name and apply the changes, an error message states Create default zone error: Zone set creation failed and the current zones on the switch in QuickTools are deleted. Workaround: When setting the default zoning, you must specify a zone name, otherwise, applying the new
HP StorageWorks Simple SAN Connection
Manager 2.10 release notes
Part number: 5697-7756
Fifth edition: January 2009