HP StorageWorks 8/8 Brocade Error Message Reference Guide v6.1.0 (53-1000600-0
HP StorageWorks 8/8 - SAN Switch Manual
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 8/8 manual content summary:
- HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 1
53-1000600-02 12 March 2008 Fabric OS Message Reference Supporting Fabric OS v6.1.0 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 2
code, please visit http://www.brocade.com/support/oscd. Brocade Communications Systems, Incorporated Corporate Headquarters Brocade Communications Systems, Inc. 1745 Technology Drive San Jose, CA 95110 Tel: 1-408-333-8000 Fax: 1-408-333-8101 Email: [email protected] European and Latin American - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 3
Manual 1001 Fabric OS System Error Message 53-1000046-01 Added BM, FCR, IPS, FCIP, SEC, and ZONE January 2006 Reference Manual messages Fabric throughout: rebranding, supported hardware, CLI changes. 15 June 2007 Fabric OS Message Reference 53-1000600-01 Updated for Fabric OS v6.0.0: -Added - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 4
iv Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 5
this document is organized xlvii Supported hardware and software xlvii What's (syslogd 3 System Console 3 Port Logs 4 Viewing and Configuring System Message Logs 4 Viewing Configuring Event Auditing 7 Reading a RAS System Message 8 Audit Event Messages 9 Message Severity Levels 11 Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 6
Responding to a System Message 11 Looking Up a System Message 11 Gathering Information About the Problem 12 Support 12 Panic Dump and Core Dump Files 12 Trace Dumps 13 supportSave Command 13 System AG-1022 28 AG-1023 29 AG-1024 29 AG-1025 29 vi Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 7
-1026 37 AUTH-1027 37 AUTH-1028 38 AUTH-1029 38 AUTH-1030 38 AUTH-1031 39 AUTH-1032 39 AUTH-1033 39 AUTH-1034 40 AUTH-1035 40 AUTH-1036 40 AUTH-1037 41 Fabric OS Message Reference vii 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 8
BL-1018 53 BL-1019 53 BL-1020 54 BL-1021 54 BL-1022 54 BL-1023 55 BL-1024 55 BL-1025 55 viii Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 9
66 BM-1055 66 BM-1056 66 BM-1058 67 C2 System Messages C2-1001 69 C2-1002 69 C2-1004 69 C2-1005 70 Fabric OS Message Reference ix 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 10
EM-1003 77 EM-1004 78 EM-1005 78 EM-1006 79 EM-1007 79 EM-1008 79 EM-1009 79 EM-1010 80 EM-1011 80 EM-1012 80 EM-1013 81 EM-1014 81 EM-1015 81 EM-1016 82 EM-1017 82 EM-1018 82 EM-1019 82 EM-1028 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 11
-1065 92 EM-1066 92 EM-2003 92 Chapter 13 ESS System Messages ESS-1001 95 ESS-1002 95 ESS-1003 95 ESS-1004 96 Fabric OS Message Reference xi 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 12
FABR-1024 106 FABR-1029 106 FABR-1030 107 FABR-1031 107 FABR-1032 107 FABR-1034 108 FABR-1035 108 FABR-1036 108 xii Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 13
FCMC-1001 121 Chapter 20 FCPD System Messages FCPD-1001 123 FCPD-1002 123 FCPD-1003 123 Chapter 21 FCPH System Messages FCPH-1001 125 Fabric OS Message Reference xiii 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 14
FCR-1031 135 FCR-1032 135 FCR-1033 135 FCR-1034 136 FCR-1035 136 FCR-1036 136 FCR-1037 136 FCR-1038 137 xiv Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 15
Fabric OS Message Reference 53-1000600-02 FCR-1039 137 FCR-1040 137 FCR-1041 137 FCR-1042 138 FCR-1043 138 FCR-1048 138 FCR- - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 16
FICN-1028 156 FICN-1029 156 FICN-1030 157 FICN-1031 157 FICN-1032 157 FICN-1033 157 FICN-1034 158 FICN-1035 158 xvi Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 17
Fabric OS Message Reference 53-1000600-02 FICN-1036 158 FICN-1037 158 FICN-1038 159 FICN-1039 159 FICN-1040 159 FICN-1041 160 FICN- - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 18
-1081 171 FICN-1082 171 FICN-1083 171 FICN-1084 172 FICN-1085 172 FICN-1086 172 Chapter 24 FICU System Messages FICU-1001 173 FICU-1002 173 FICU-1003 173 FICU-1004 174 FICU-1005 174 1003 179 FLOD-1004 179 FLOD-1005 179 FLOD-1006 180 xviii Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 19
191 FW-1009 191 FW-1010 191 FW-1011 192 FW-1012 192 FW-1033 192 FW-1034 192 FW-1035 193 FW-1036 193 Fabric OS Message Reference xix 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 20
FW-1126 203 FW-1127 203 FW-1128 203 FW-1129 204 FW-1130 204 FW-1131 204 FW-1132 205 FW-1133 205 xx Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 21
Fabric OS Message Reference 53-1000600-02 FW-1134 205 FW-1135 206 FW-1136 206 FW-1137 206 FW-1138 206 FW-1139 207 FW- - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 22
FW-1299 226 FW-1300 226 FW-1301 227 FW-1302 227 FW-1303 227 FW-1304 228 FW-1305 228 FW-1306 228 xxii Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 23
Fabric OS Message Reference 53-1000600-02 FW-1307 229 FW-1308 229 FW-1309 229 FW-1310 230 FW-1311 230 FW-1312 230 FW- - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 24
FW-1373 251 FW-1374 252 FW-1375 252 FW-1376 252 FW-1377 253 FW-1378 253 FW-1379 253 FW-1400 254 xxiv Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 25
-1501 262 FW-1510 262 Chapter 31 HAM System Messages HAM-1001 263 HAM-1002 263 HAM-1004 263 HAM-1005 264 HAM-1006 264 Fabric OS Message Reference xxv 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 26
HIL-1308 275 HIL-1309 276 HIL-1310 276 HIL-1311 276 HIL-1401 276 HIL-1402 277 HIL-1403 277 HIL-1404 277 xxvi Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 27
IBD-1001 289 Chapter 38 IBPD System Messages IBPD-1001 291 IBPD-1002 291 IBPD-1003 291 Chapter 39 ICPD System Messages ICPD-1001 293 Fabric OS Message Reference xxvii 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 28
ICPD-1008 294 Chapter 40 IPAD System Messages IPAD-1000 297 IPAD-1001 297 Chapter 41 IPS System Messages IPS-1001 299 IPS-1002 299 IPS-1003 299 IPS-1004 299 IPS-1005 300 IPS-1006 300 Chapter 42 -1011 305 ISNS-1013 305 ISNS-1014 306 xxviii Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 29
MPTH-1002 317 MPTH-1003 317 Chapter 50 MQ System Messages MQ-1004 319 Chapter 51 MS System Messages MS-1001 321 MS-1002 321 Fabric OS Message Reference xxix 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 30
PDM-1006 332 PDM-1007 332 PDM-1008 333 PDM-1009 333 PDM-1010 333 PDM-1011 334 PDM-1012 334 PDM-1013 334 xxx Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 31
Messages PORT-1003 343 PORT-1004 343 PORT-1005 343 Chapter 58 PS System Messages PS-1000 345 PS-1001 345 PS-1002 345 PS-1003 345 PS-1004 346 PS-1005 346 Chapter 59 PSWP System Messages PSWP-1001 347 PSWP-1002 347 PSWP-1003 347 Fabric OS Message Reference xxxi 53-1000600 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 32
358 RPCD-1005 358 RPCD-1006 358 RPCD-1007 358 Chapter 63 RTWR System Messages RTWR-1001 359 RTWR-1002 359 RTWR-1003 360 xxxii Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 33
371 SEC-1037 372 SEC-1038 372 SEC-1040 372 SEC-1041 372 SEC-1042 373 SEC-1043 373 SEC-1044 373 SEC-1045 373 Fabric OS Message Reference 53-1000600-02 xxxiii - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 34
SEC-1084 382 SEC-1085 382 SEC-1086 382 SEC-1087 383 SEC-1088 383 SEC-1089 383 SEC-1090 384 SEC-1091 384 xxxiv Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 35
Fabric OS Message Reference 53-1000600-02 SEC-1092 384 SEC-1093 384 SEC-1094 385 SEC-1095 385 SEC-1096 385 SEC-1097 386 SEC- - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 36
SEC-1185 403 SEC-1186 404 SEC-1187 404 SEC-1188 404 SEC-1189 405 SEC-1190 405 SEC-1191 405 SEC-1192 406 xxxvi Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 37
Fabric OS Message Reference 53-1000600-02 SEC-1193 406 SEC-1194 406 SEC-1195 406 SEC-1196 407 SEC-1197 407 SEC-1198 407 SEC- - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 38
426 SULB-1005 426 SULB-1006 426 SULB-1007 426 SULB-1008 427 SULB-1009 427 SULB-1010 433 SULB-1011 433 SULB-1017 433 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 39
System Messages SYSC-1001 443 SYSC-1002 443 SYSC-1003 443 SYSC-1004 444 SYSC-1005 444 Chapter 72 SYSM System Messages SYSM-1001 445 Fabric OS Message Reference 53-1000600-02 xxxix - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 40
Messages TS-1001 453 TS-1002 453 TS-1006 454 TS-1007 454 TS-1008 454 Chapter 76 UCST System Messages UCST-1003 457 xl Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 41
WEBD-1006 462 WEBD-1007 462 WEBD-1008 462 Chapter 79 ZOLB System Messages ZOLB-1001 463 Chapter 80 ZONE System Messages ZONE-1002 465 ZONE-1003 465 ZONE-1004 465 ZONE-1005 466 ZONE-1006 470 ZONE-1023 470 ZONE-1024 470 ZONE-1026 470 Fabric OS Message Reference xli 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 42
-3004 480 AUTH-3005 480 AUTH-3006 480 AUTH-3007 481 AUTH-3008 481 AUDIT CONF System Messages CONF-1000 483 CONF-1020 483 xlii Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 43
495 SEC-3021 495 SEC-3022 496 SEC-3023 496 SEC-3024 496 SEC-3025 497 SEC-3026 497 SEC-3027 497 SEC-3028 497 Fabric OS Message Reference xliii 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 44
SULB-1003 507 SULB-1004 508 SULB-1009 508 SULB-1010 514 SULB-1017 514 SULB-1018 514 SULB-1020 515 SULB-1021 515 xliv Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 45
523 ZONE-3018 524 ZONE-3019 524 ZONE-3020 524 ZONE-3021 524 ZONE-3022 525 ZONE-3023 525 ZONE-3024 525 ZONE-3025 525 Fabric OS Message Reference xlv 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 46
xlvi Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 47
all possible configurations and scenarios is beyond the scope of this document. The following hardware platforms are supported by this release of Fabric OS: • Brocade 200E, 4012, 4016, 4018, 4020, 4024 switches • Brocade 3250 switch • Brocade 3850 switch • Brocade 3900 switch Fabric OS Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 48
4100, 4900, 5000, 7500, AP 7600 switches • Brocade 24000 director • Brocade 48000 director • FA4-16 blade • FC10-6 blade What's new in this document The following formatting The narrative-text formatting conventions that are used are as follows: xlviii Fabric OS Message Reference 53-1000640-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 49
user narrative portions of this guide are presented in mixed often all lowercase. Otherwise, this manual specifically notes those cases in which notices and statements are used in this manual. They are listed below in order of Brocade and Fibre Channel, see the Brocade Glossary. For definitions of SAN - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 50
register at no cost for a user ID and password. For practical discussions about SAN design, implementation, and maintenance, you can obtain Building SANs with Brocade Fabric Switches through: http://www.amazon.com For additional Brocade documentation, visit the Brocade SAN Info Center and click the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 51
located inside the chassis on the port side on the left • Brocade 5000-On the switch ID pull-out tab located on the bottom of the port side of the switch • Brocade 7600-On the bottom of the chassis • Brocade 48000-Inside the chassis next to the power supply bays • Brocade DCX-On the bottom right on - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 52
lii Fabric OS Message Reference 53-1000640-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 53
guide supports Fabric OS v6.1.0 and documents system messages that can help you diagnose and fix problems with a switch or fabric. The messages are organized first by event type, reliability, availability, and serviceability zone, or configuration changes. Fabric OS supports a different methodology - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 54
Event auditing is designed to support post-event audits and problem determination based on high-frequency events of certain types such as security violations, zoning configuration changes, firmware downloads, and certain types of fabric events. Fabric OS versions earlier than v5.2.0 generated - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 55
, login/logout, passwords, ACLs): SEC-3001 - 3038 • Software upgrade library: SULB-1001 - 1003, 1009 - 1010, 1017 -1018, 1020 - 1021, 1023 - 1024, 1026, 1030 - 1031, 1033 - 1035 • Zoning messages: ZONE-3001 - 3025 Event auditing is a configurable feature, set to off by default. You must enable event - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 56
log and syslog (if enabled). Port Logs The Fabric OS maintains an internal log of all port activity. Each switch or logical switch maintains a log file for each port. Port logs are circular buffers that can save up to 8000 entries per logical switch. When the log is full, the newest log entries - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 57
portLogEventShow command. portLogTypeEnable Enables an event to report to the port log. Port log events are described by the portLogEventShow command. setVerbose Sets the verbose level of a particular module within the Fabric OS. supportFtp Sets, clears, or displays support FTP parameters or - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 58
service provider to diagnose and correct problems with the switch. The output from this command is very long. syslogDIpAdd Adds an IP address as a recipient of system messages. syslogDIpRemove Removes an IP address as a recipient of system messages. syslogDIpShow Views the currently configured - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 59
[EM-1055], 3,, WARNING, switch, Media 27: Port media incompatible e. Reason: Configured port speed. Type to Configuring Event Auditing To configure event auditing: 1. Configure the event classes you wish to audit: switch:admin> auditcfg --class 1,2,3,4,5 Audit filter is configured. Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 60
was generated on the switch. The RASLog subsystem supports an internationalized timestamp format base on the "LOCAL" setting. The message module and number. These values uniquely identify each message in the Fabric OS and reference the cause and actions recommended in this manual. Note that not all - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 61
reset to 1 using the errClear command. The sequence number is persistent across power cycles and switch reboots problem determination. Audit event message format: AUDIT, , [], , , ////. / - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 62
switch. The RASLog subsystem will support an internationalized timestamp format base on the "LOCAL" setting. Message Module and Message Number The message module and number. These values uniquely identify each message in the Fabric OS and reference the cause and actions recommended in this manual - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 63
guidelines for troubleshooting. For all For example, a power supply failure in fabric port. Responding to a System Message This section provides procedures on gathering information on system messages, including: •Looking Up a System Message 11 •Gathering Information About the Problem 12 •Support - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 64
the steps to produce the problem? - What configuration was in place when the problem occurred? 8. Did a failover occur? 9. Was security enabled? 10. Was POST enabled? 11. Are serial port (console) logs available? 12. Which CP was master? (only applicable to the Brocade DCX, 12000, 24000, or 48000 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 65
using fewer physical ports. Access Gateway mode transforms the Brocade 200E as well as embedded switches into a device management tool that is compatible with different types of fabrics, including Brocade-, Cisco-, and McDATA-based fabrics. Authentication error messages indicate problems with the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 66
the domain and alias lists to all switches in the fabric. Fabric OS system driver module. Firmware blade compatibility errors with control processor (CP). Fibre Channel over IP port configuration messages. Fibre Channel miscellaneous messages relate to problems with the physical layer used to send - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 67
information. Moreover, ICPD distributes iSCSI configurations not only switch wide, but also fabric wide. It keeps track iSCSI VT status and updates VT status to BP. System messages generated by the IP admin demon. Fibre Channel over IP license, tunneling, and port-related messages. The ISCS module - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 68
) • EVM daemon (evmd) • Exchange Service Support daemon (essd) • FA-API rpc daemon (rpcd) • Fabric daemon (fabricd) • Fabric Watch daemon (fwd) • FCPD daemon ( messages relate to Fibre Connection (FICON) installations. Fibre Connection control unit port (FICON-CUP) messages are displayed under the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 69
Continued) Description The Management Service enables the user to obtain information about the Fibre Channel fabric topology and attributes by providing a single management access point. MS provides for both monitoring and control of the following areas: Fabric Configuration Server. Provides for the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 70
station. Brocade switches support six management entities that can be configured to receive these traps. The supportSave command generates these error messages if problems are encountered. The software upgrade library provides firmwareDownload command capability, which enables firmware upgrades to - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 71
RASLog Messages Section I This section provides the RASLog messages, including: •AG System Messages 23 •AUTH System Messages 31 •BKSW System Messages 45 •BL System Messages 47 •BLL System Messages 61 •BM System Messages 63 •C2 System Messages 69 •CDR System Messages 71 •CER System Messages - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 72
Messages 291 •ICPD System Messages 293 •IPAD System Messages 297 •IPS System Messages 299 •ISCS System Messages 301 •ISNS System Messages 303 System Messages 331 •PDTR System Messages 339 •PLAT System Messages 341 •PORT System Messages 343 •PS System Messages 345 •PSWP System Messages 347 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 73
DRAFT: BROCADE CONFIDENTIAL •TRCK System Messages 451 •TS System Messages 453 •UCST System Messages 457 •UPTH System Messages 459 •WEBD System Messages 461 •ZOLB System Messages 463 •ZONE System Messages 465 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 74
- HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 75
to the Fabric OS Command Reference manual for more information on this command. • Some blades and ports in a switch may not support NPIV. NPIV functionality cannot be enabled on such ports and they will not respond to NPIV requests. Refer to the Access Gateway Administrator Guide, Appendix B for - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 76
the fabric for N_Port . Probable Cause Indicates that the fabric sent an invalid response to the FLOGI Extended Link Service (ELS) for the specified N_Port. Recommended Action Please check the configuration of the fabric switch. If the message persists, run supportFtp (as needed) to set up - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 77
to the fabric switch. Recommended Action Please check the configuration of the fabric switch connected to the Access Gateway. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 78
of sending the discover F_Port service parameter request from the Access Gateway to the fabric switch. Recommended Action Please check the configuration of the fabric switch connected to the Access Gateway. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 79
Action Please check whether or not any other N_Port is configured. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportsave command and contact your switch service provider. Severity WARNING AG-1016 Message , [AG-1016], - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 80
>, Unable to do Preferred-Failover of F_Port . Failover across different fabric is not supported. Probable Cause Failover across N_Ports connected to different fabrics is not supported. Recommended Action Please change the preferred N_Port settings for this F_Port using ag --prefset. Choose - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 81
N_Port had its preferred set and is online. switch is the same. Recommended Please run the porttrunkarea --show command on the attached switch to display that the TA is Action assigned to all ports in the system and run porttrunkarea --enable to reconfigure the TA. Severity ERROR Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 82
resources. Recommended Action Run configure CLI on AG switch and increase the number of allowed logins on this port. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 83
contact your switch service provider. Severity ERROR AUTH-1003 Message , [AUTH-1003], ,, INFO, , type has been successfully set to . Probable Cause Indicates that an authentication configuration value was set to the specified - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 84
command and contact your switch service provider. Severity ERROR AUTH-1006 Message , [AUTH-1006], ,, WARNING, , Failed to open authentication configuration file. Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 85
Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action Reboot or power cycle the switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 86
and contact your switch service provider. Severity WARNING AUTH-1014 Message , [AUTH-1014], , FFDC, ERROR, , Invalid port value to : port . Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 87
and contact your switch service provider. Severity ERROR AUTH-1018 Message , [AUTH-1018], ,, ERROR, , Invalid value to check protocol type: port . Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 88
entity is not set up properly. Reinstall all PKI objects or reset the secret value for DH-CHAP properly. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. 36 Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 89
set up automatic FTP transfers; then run the supportSave command and contact your switch service provider switch does not support the specified authentication value. Recommended Check the authentication configuration and reset the supported value if needed using the authUtil Action command. Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 90
problem set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1030 Message , [AUTH-1030], ,, ERROR, , Invalid message code for message: port . 38 Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 91
problem set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1033 Message , [AUTH-1033], ,, ERROR, , Disable port due to unauthorized switch . Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 92
that the switch received an unexpected authentication message. Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. 40 Fabric OS Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 93
policy: Port disabled. Indicates that the neighboring switch has a conflicting authentication policy enabled. The_E-Port has been disabled, because the neighboring switch rejected the authentication negotiation, and the local switch has a strict switch authentication policy. Fabric OS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 94
to conflicting configuration settings. Otherwise E_Port will form without authentication. Recommended Action If there is no light on the port, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch using the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 95
failed. Device authentication will be defaulted to OFF, and switch will not participate in Diffie Hellman - challenge handshake authentication protocol (DH-CHAP) authentication with devices. Recommended Try setting the device authentication policy manually using the authUtil command. Action - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 96
3 AUTH-1044 44 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 97
is found, run supportFtp to send all core files to a secure server location. Copy the error message and any core file information, and contact your switch service provider. Severity WARNING Fabric OS Message Reference 45 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 98
4 BKSW-1003 46 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 99
hardware problems. Note that any reference seen to slot 0 is a reference to the blade within the switch platform, e.g.,Brocade 7500 and AP7600 contain FR4-18i and FA4-18 blades respectively. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 100
to a user setting. Recommended Action Reboot or power cycle the blade, using the slotPowerOff and slotPowerOn commands. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 101
is healthy. If the standby CP was removed Action or faulted by user intervention, no action is required. Severity INFO BL-1007 Message , not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 102
(SFP), or device attached to the specified port. Run the systemVerification command to verify that the blade or switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. On a bladed switch, run the slotPowerOff and slotPowerOn commands. On - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 103
an excessive number of interrupts that might prove fatal to the switch operation. The port is disabled to prevent the control processor (CP) from becoming too busy. The bport is the blade port; this number might not correspond to a user port number. Fabric OS Message Reference 51 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 104
a hardware error. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If there is a hardware error, if the slotPowerOff or slotPowerOn fails on the bladed switch or if errors are encountered again: • On the Brocade DCX, 24000, and 48000, replace the blade field-replaceable - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 105
have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference ... Probable Cause Indicates that the slot has started initializing the ports. Recommended No action is required. Action Severity INFO BL-1018 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 106
internal ports was not online. The switch is faulted. Recommended Action Reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 107
Virtualization ports on the blade in slot will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the blade's firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all GigE/Fibre Channel over IP (FCIP - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 108
power cycle the switch. If the message persists, replace the switch. Severity CRITICAL BL-1029 Message , [BL-1029], ,, INFO, , All ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 109
/FC Fastwrite ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all the GigE/Fibre Channel over IP (FCIP - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 110
messages from the user ports after disabling the ports. Recommended Action Reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If the message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 111
-name>, Faulting chip in slot = , miniS = ,port = due to BE/BI port fault. Probable Cause Fault the chip and disable all the ports on that chip. Recommended No action is required. Action Severity CRITICAL Fabric OS Message Reference 59 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 112
5 BL-1037 60 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 113
= Wait for LPC open state • 18 = Wait for Old port state • 19 = Wait for Open init state • 20 = power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 114
6 BLL-1000 If the message persists, replace the blade. Severity CRITICAL 62 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 115
Action The problem can be corrected by changing the firmware version on either the firmware download is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP blade. If needed, send the AP blade back to the factory for a firmware - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 116
blade. On the Brocade Action DCX, 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1006 Message , [BM-1006], ,, INFO, , Blade is not configured. Persistently disabling all ports for blade in slot - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 117
affected blade. On the Brocade Action 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1010 Message , [BM-1010], ,, INFO, , Resetting port configuration and linkcost for all ports for blade in slot - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 118
. On the Brocade Action DCX, 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1056 Message , [BM-1056], ,, INFO, , AP is not configured. Persistently disabling all ports on the switch. 66 Fabric OS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 119
Configure the switch to persistently enable all ports. Action Severity INFO BM-1058 Message , [BM-1058], ,, WARNING, , Download of AP firmware failed for the switch. Reissue firmwaredownload to recover. Probable Cause The automatic firmware upgrade - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 120
7 BM-1058 68 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 121
, Port port fault (the configured speed may not be supported by the SFP Port chip faulted due to an internal error. Probable Cause Internal error. All the ports on the blade/switch problem Action persists, replace the blade. Severity ERROR Fabric OS Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 122
Message , [C2-1005], ,, ERROR, , Rate limit configuration is not effective on S() user port because QoS license is not present. Probable Cause Indicates that the switch does not have the QoS license added. Rate Limit is a licensed - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 123
(SFP), an incompatible SFP pair, a faulty cable between peer ports, or the port speed configuration does not match the capability of the SFP. Recommended Action Verify at the next maintenance window. If the problem Action persists, replace the blade. Fabric OS Message Reference 71 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 124
specific integrated circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error occurs, reboot the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR 72 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 125
loaded on the standby CP. The standby CP does not support the Advanced Performance Tuning module when the fibre connectivity (FICON) Management Server is enabled. Recommended Action Run the firmwareDownload command to upgrade the firmware on the standby CP. You can also disable FMS on the active - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 126
10 CER-1001 74 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 127
configuration parameters that were downloaded. If Admin Domain (AD) is enabled configured on the system>. Probable Cause There are many possible causes. Recommended Check the error log for a possible cause. Please correct the error and download the configuration Action again. Severity INFO Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 128
more parameters that require the switch to be disabled. Recommended Disable the switch and try to download configuration again. Action Severity INFO CONF-1030 Message , [CONF-1030], ,, WARNING, , Configuration database full, data not committed (key: - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 129
faulted. Probable Cause Indicates that a field-replaceable unit (FRU) header could not be read or is not valid. The FRU is faulted. Recommended Action On Brocade 24000 and 48000, try reseating the specified FRU. Reboot or power cycle the switch. Fabric OS Message Reference 77 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 130
and an optional number to identify the unit, slot, or port. The Brocade 3250 has one power supply and three fans, and the Brocade 3850 has two power supplies and four fans. Values for the individual fans and power supplies for these switches might display, but these parts cannot be replaced: the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 131
that the voltage on a switch has exceeded environmental limits. A reset is sent to the faulty slot or the switch for nonbladed switches. Recommended Action There is most likely a voltage hardware problem on the blade or motherboard of the switch. For the Brocade DCX, 24000 and 48000, replace - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 132
. There are serious internal Fabric OS configuration or hardware problems on the switch. Recommended Action On Brocade DCX, 24000 and 48000, try reseating the indicated field-replaceable unit (FRU). If the message persists, reboot or power cycle the switch. 80 Fabric OS Message Reference 53 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 133
code>). Probable Cause Indicates that a problem was discovered when performing consistency checks during a warm boot. Recommended Monitor the switch. If the problem persists, a reBoot or power cycle is required to resolve the Action problem. Severity WARNING Fabric OS Message Reference 81 53 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 134
that a problem was discovered when performing consistency checks during a cold boot. Recommended Action Monitor the switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 135
1 with the chassisConfig command, or upgrade the Action firmware on the standby to the version running problem. The FRU ID value is composed of a FRU type string and an optional number to identify the unit, slot, or port. Recommended Action If the message persists, reboot or power cycle the switch - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 136
manual for instructions on inserting the switch blades. Severity ERROR EM-1033 Message , [EM-1033], ,, ERROR, , CP in set command to verify that the switch does not have hardware problems. Refer to the Fabric OS Command Reference for more - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 137
card, then default WWN and IP addresses are used for the switch. Recommended Action Reseat the FRU card. If the message persists, reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the Fabric OS Command Reference - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 138
Recommended If the message is isolated, monitor the error messages on the switch. If the message is associated Action with other messages, follow the recommended -number>,, WARNING, , Can't power on , its logical switch is shut down 86 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 139
be powered on because the associated logical switch is shut down. Recommended Run the switchStart command on the associated logical switch. power), a newly inserted port blade was not powered on because there was not enough power available. Recommended The Brocade 24000 requires only a single power - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 140
become available again. Recommended The EM-1029 error can be a transitory error; if the problem resolves, the EM-1048 message is Action displayed. Severity INFO EM-1049 Message , >, : Inconsistency detected, FRU re-initialized. 88 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 141
to be used in the slot. Recommended Action Verify that the media can be run at the configured port speed. If the port media is extended long wavelength, move it to a port that can support the heat generated. Severity WARNING EM-1056 Message , [EM-1056], ,, WARNING - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 142
the switch does not reach the reset threshold for the switch/blade. If the reset threshold is reached on the switch/blade, the switch/ system is not supported by the release on the standby control processor (CP). Recommended Action Please remove all blades of this type or upgrade your standby CP - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 143
off (based on user configuration) upon receiving a HW ASIC ERROR, reason:. The blade is power off since a hardware (HW) application specific integrated circuit (ASIC) ERROR was detected, and the user has selected to power off the problem blade when such a condition occurred. Fabric OS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 144
incompatible Fabric OS or Storage Application Services (SAS) firmware have been upgraded and are Switch for non-bladed systems. Recommended Action On bladed systems, try reseating the specified FRU. On nonbladed switches, reboot or power cycle the switch. If the problem persists: 92 Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 145
systemverification command to verify that the switch does not have hardware problems. Refer to theFabric OS Reference Manual for more information on this command. • On bladed systems, replace the specified FRU, otherwise replace the switch. Severity ERROR Fabric OS Message Reference 93 53-1000600 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 146
12 EM-2003 94 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 147
Discontinue the firmware download, identify the downlevel switch or switches that do not support the Coordinated HotCode protocol, and upgrade the downlevel switches. Then, restart the firmware download on this switch. Note that upgrading a downlevel Brocade switch in a mixed interop fabric may - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 148
. Probable Cause During the Coordinated HotCode protocol, a switch in the fabric has rejected the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the rejected resume message. Recommended - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 149
id.> Probable Cause The event could not be sent to the remote proxy because the remote proxy switch cannot be reached through in-band. Recommended Please make sure that the specified remote domain is present in the fabric. Action Severity WARNING Fabric OS Message Reference 97 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 150
14 EVMD-1001 98 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 151
,, WARNING, , port , . Probable Cause Indicates that the specified switch port is isolated because of a segmentation due to mismatched configuration parameters. Recommended Action Based on the segmentation reason displayed within the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 152
frame. If it is due to problems with the kernel, the system will recover by performing a failover. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1005 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 153
problem with the Fabric OS. Recommended Action In case of severe memory corruption, the system might recover by performing an automatic failover. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 154
message is rare and usually indicates a problem with the Fabric OS. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FABR-1011 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 155
has a different domain ID, then the port is disabled. Recommended Action Run the configShow command to view the fabric.ididmode. A 0 means the IDID mode is disabled; a 1 means it is enabled. Set the switch to insistent domain ID mode. This mode is set under the configure command or in Web Tools on - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 156
user that the switch failed to become the principal switch because either: • The switch joined an existing fabric and bypassed the F0 state. • The fabric already contains a principal switch that has a lower world-wide name (WWN). Recommended Action Make sure that no other switches is configured - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 157
limit. Contact your switch provider to obtain a full fabric license. Severity CRITICAL FABR-1022 Message , [FABR-1022], , FFDC, CRITICAL, , Fabric size () exceeds supported configuration (). Fabric limit timer ( - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 158
the licensed limit. Contact your switch provider to obtain a full fabric license. Severity CRITICAL FABR-1023 Message , [FABR-1023], ,, INFO, , Fabric size is within supported configuration (). Fabric limit timer () stopped at - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 159
buffer credits are fixed, based on the port configuration information. In this fabric. Probable Cause Indicates that a switch with an unsupported Fabric OS version 2.x has joined the fabric. Recommended Remove the switch with the unsupported Fabric OS version 2.x from the fabric. Action Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 160
>. Probable Cause User must enable Trunk Area on a port for another port to use the same area. Recommended Action The user has to move the cable to a port area that is not in use, or the user must disable Trunk Area. The user has to manually enable the port else the port remains disabled forever - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 161
-number>, INFO, , Port configuration incompatible with Trunk Area enabled port. Persistently disabling port . Probable Cause When the port attempts to go online, Switch finds the Trunk Area enabled with incompatible port configuration such as long distance - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 162
15 FABR-1039 110 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 163
has been detected by the software. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1004 Message , [FABS-1004 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 164
an invalid value in an object's status field. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. 112 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 165
an unknown event type. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1011 Message Probable Cause , [FABS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 166
Fabric OS problem. Recommended Action Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware FRU header, or the blade may not be supported by this platform or Fabric OS version. Recommended Action Verify that the blade is valid - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 167
FRU could not be enabled. This is usually an internal Fabric OS problem. Recommended Action Try removing and reinserting the FRU. Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 168
16 FABS-1015 116 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 169
disruptive firmwareDownload is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP blade. If required, send the AP blade back to the factory to get a new firmware version installed. Severity ERROR Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 170
17 FBC-1001 118 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 171
, FFDC, ERROR, , of GE failed. Please retry the command. Data: inst= st= - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 172
18 FCIP-1001 120 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 173
allocate new memory for an information unit (IU). Recommended A nonbladed switch will automatically reboot. For a bladed switch, the active CP blade will Action automatically fail over and the standby CP will become the active CP. Severity CRITICAL Fabric OS Message Reference 121 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 174
19 FCMC-1001 122 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 175
) during probing. Recommended Action The Brocade DCX, 4100, 4900, 5000, 7500, and AP 7600 do not support private loop devices. Refer to the switch vendor for a list of other port types that support private devices for inclusion into the fabric. Severity INFO Fabric OS Message Reference 123 53 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 176
20 FCPD-1003 124 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 177
function call> failed, out of memory condition Probable Cause Indicates that the switch is low on memory and failed to allocate new memory for a Fibre for kernel memory allocation. Recommended A nonbladed switch will automatically reboot. For a bladed switch, the active CP blade will Action - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 178
21 FCPH-1001 126 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 179
-number>,, INFO, , FC router proxy device in edge created at port . Probable Cause Indicates that a proxy device in the edge fabric has been imported at the specified port. Recommended No action is required. Action Severity INFO FCR-1002 Message , [FCR - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 180
,, INFO, , FC router LSAN zone device added at port . Probable Cause Indicates that a device is added to a logical storage area network (LSAN) zone in the edge fabric. Recommended No action is required. Action Severity INFO FCR-1007 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 181
, FC router LSAN zone enabled at port : . Probable Cause Indicates that a logical storage area network (LSAN) zone was enabled in the edge fabric attached to the specified port. The enabled LSAN zone configuration is listed. Recommended No action is required - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 182
], ,, INFO, , FCR fabric no longer reachable at port id fabric ID . Probable Cause Indicates that a fabric is no longer accessible through the backbone fabric. This may be caused by a link or switch failure. Recommended No action is required - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 183
resources including LSAN zone resources, LSAN device resources, and proxy device port resources. Use the fcrProxyDevShow command to view how many proxy devices are created in the fabric with the port resource problem. LSAN zones are removed using standard zoning commands such as zoneShow, zoneRemove - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 184
entries exhausted. Probable Cause Indicates that the number of port world-wide names (WWNs) in use exceeds the local port WWN resources. Recommended Action Limit the number of port WWNs required by limiting the remote edge fabric connectivity (which limits the number of translate domains). You - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 185
LSAN) defined in the edge fabric exceeds the local LSAN zone by limiting the remote edge fabric connectivity (which Action limits switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) devices and fabrics attached to fabrics with highly - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 186
the switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) devices and fabrics, or , , In slot port WWN pool 95 percent allocated. Probable Cause Indicates that the Port world-wide name (WWN) pool has rolled over - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 187
-1032 Message , [FCR-1032], ,, INFO, , Edge fabric enabled security on port in fabric . Probable Cause Indicates that Secure mode was turned on in the edge fabric. Recommended No action is required. Action Severity INFO FCR-1033 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 188
. Probable Cause Indicates that the specified logical storage area network (LSAN) zone was enabled in the backbone fabric. The enabled LSAN zone configuration is listed. Recommended No action is required. Action Severity INFO FCR-1037 Message , [FCR-1037], ,, INFO - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 189
name>, zone limit: . Probable Cause Indicates that the number of cfg/zone/alias entries created in a local fabric is greater than the local switch's zone database limitations. Recommended Remove excess cfg/zone/alias entries so that the number of logical storage area network (LSAN - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 190
credit type was not set. Recommended Action Setting port credits failed. Execute the portEnable command. If the problem persists try rebooting the switch. If the message persists, collect switch information using the supportShow command, and contact your switch service provider. Severity ERROR - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 191
the portEnable and portDisable commands to enable and disable the port. If the problem persists contact your switch service provider. Severity ERROR FCR-1053 Message , [FCR-1053], ,, WARNING, , Port was disabled, . Probable - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 192
Switch with front domain ID does not support backbone to edge imports. Probable Cause Indicates that a switch that does not support switch. Run the appropriate configuration command to modify the switch or port parameters on the remote switch. Severity WARNING 140 Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 193
number>,, WARNING, , EX_Port() has an incompatible configuration setting. Probable Cause Indicates that virtual channel (VC) Link Init is enabled on the local switch and the remote switch is negotiating in R_RDY mode. The fabric might not form properly. Recommended Action - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 194
VEX_ports was exceeded. To enable the specified port, disable any other operational port then re-enable the port. Recommended No action is required. Action Severity INFO FCR-1063 Message , [FCR-1063], ,, INFO, , Fabric for switch with domain ID - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 195
the fabrics and manually re-enable the port. If there is another fabric with the same ID, change the fabric ID for the port using the portCfgExport or portCfgVExport commands. Severity ERROR FCR-1067 Message , [FCR-1067], ,, WARNING, , Zone configurations - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 196
with the fcrState set to 1 (enabled). Note that the FC Routing service is disabled by the factory. Recommended No action is required. Action Severity INFO FCR-1070 Message , [FCR-1070], ,, INFO, , The FC Routing configuration is set to default. Probable - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 197
is larger than characters in the edge fabric connected to port . Probable Cause Indicates that the zone name configuration size created in the connected fabric exceeds the maximum supported by the FC Router. This size is equal to the total number of characters - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 198
re-enable the port. Recommended Make sure to remain within the maximum of supported front domains. Action Severity ERROR FCR-1077 Message , [FCR-1077], ,, WARNING, , Port rejected fabric binding request/check from the M-Model switch; - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 199
the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric did not accept the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended Action - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 200
the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric did not accept the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended Action - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 201
switch that the FICON Channel is directly connected to. HP - Host Port number: This is a 1 byte hexidecimal value that represents the switch port of the switch , FICON Tape Emulation License Key is not installed. Probable Cause FICON Tape Emulation requires a License Key. - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 202
Block ID Emulation Enabled or Disabled>. Probable Cause User changed the configuration manually. Recommended No action is required. Action Severity INFO FICN-1006 Message , [FICN-1006], ,, WARNING, , FICON GEPort < 0 or 1 - GE port number> TID - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 203
failure associated with this event, please contact your vendor's customer support Action for assistance. Severity INFO FICN-1010 Message , [ presented a Read Record Set Sequence number different from the SDM's expected sequence number. Fabric OS Message Reference 151 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 204
suspended associated with this event, please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1012 Message , [FICN-1012 , please contact your vendor's customer support Action for assistance. Severity INFO 152 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 205
emulation processing components. Recommended Please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1016 Message , Please contact your vendor's customer support for assistance. Action Severity ERROR Fabric OS Message Reference 153 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 206
support Action reset> statArray=0x cmdArray=0x tflags=0x sflags=0x. 154 Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 207
support for assistance. Severity ERROR FICN-1023 Message , [FICN-1023], ,, ERROR, , DevTapeEgr:FICON Selective Reset:Path please contact your Action vendor's customer support for assistance. Severity ERROR Fabric OS Message Reference 155 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 208
Error associated with this event, please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1029 Message Probable Cause , [ active disk emulation device received a Selective Reset from the FICON channel. 156 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 209
this event, please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1030 Message , sent a System Reset to the disk control unit. Recommended No action is required. The MVS system was either set to IPL or Fabric OS Message Reference 157 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 210
processing. Recommended Please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1035 Message System Reset received on Path=. Probable Cause A locally connected FICON channel issued a System Reset to 158 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 211
with a FICON Control Unit. Recommended Please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1040 Message , [FICN- contact your Action vendor's customer support for assistance. Severity ERROR Fabric OS Message Reference 159 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 212
Reset. Recommended If this was an unexpected event, please contact your vendor's customer support for Reset:Path= Elapsed Time=. seconds. 160 Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 213
Reset. Recommended If this was an unexpected event, please contact your vendor's customer support for > prevState=0x set to state=0x - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 214
to its peer. Recommended This is an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1051 Message Probable Cause , [FICN-1051], an XRC session with the extended DASD device. 162 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 215
event, please contact your vendor's customer support for assistance. Action Severity INFO FICN-1053 event, please contact your vendor's customer support for assistance. Action Severity INFO FICN , please contact your vendor's customer support for assistance. Action Severity WARNING FICN - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 216
If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1056 Message , [FICN-1056 please contact your vendor's customer support for assistance. Action Severity ERROR 164 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 217
entry. Recommended This is an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1062 Message , [FICN-1062], your vendor's customer support for assistance. Action Severity ERROR Fabric OS Message Reference 165 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 218
Port>. Probable Cause An abort operation has been received from a peer FC interface for an exchange. Recommended If there were associated IO errors at the same time as this event, please contact your vendor's Action customer support not be allocated. 166 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 219
the same time as this event, please contact your vendor's Action customer support for assistance. Severity ERROR FICN-1069 Message , [FICN-1069], ,, ERROR, , Emulation Configuration Error on TunnelId :. Probable Cause An error has been noted - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 220
associated Action IO error messages with this event, please contact your vendor's customer support for assistance. Severity INFO FICN-1071 Message , [FICN-1071], - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 221
processed from a locally connected LPAR and Read Channel Program pipelining was performed on the currently loaded tape. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 169 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 222
been processed from a remotely connected LPAR and write pipelining was performed on the currently loaded tape. Recommended No action is required. Action Severity INFO 170 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 223
this device> treating as system reset event. Probable Cause An Port Host> Port=0x. Probable Cause An attached port which had an FICON emulated path established has logged out from the switch. Recommended This may be an unexpected event, please contact your vendor's customer support - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 224
GE1>,tunnel Id=. Probable Cause A FICON FCIP tunnel has been terminated to the peer switch. Recommended If this is an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR 172 Fabric OS Message Reference 53-1000600 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 225
error number. Recommended Action If this is a bladed switch, execute the haFailover command. If the problem persists, or if this is a nonbladed switch, download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference for more information on this command - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 226
FICON Management Server mode (fmsMode) to be enabled, the core PID format must be used in the fabric. Change the PID format to core PID using the configure command and reenable fmsmode using the ficonCupSet command. Refer to the Fabric OS Administrator's Guide for information on core PID mode and - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 227
(as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FICU-1008 Message , [FICU-1008], ,, WARNING, , FMS mode has been enabled. Port(s): have been - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 228
mode (fmsMode) was not enabled because the specified port has an address conflict with the CUP management port is in use. Recommended Use the portDisable command to disable the specified port to avoid the port address conflict. Action Severity WARNING 176 Fabric OS Message Reference 53-1000600 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 229
overlap. This happens on a timed-out exchange; it automatically recovers after the application times the exchange out. Recommended No action is required. Action Severity WARNING Fabric OS Message Reference 177 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 230
25 FKLB-1001 178 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 231
, FFDC, WARNING, , Unknown LSR type: port , type Probable Cause Indicates that the link can support. Recommended Reduce the number of switches in the fabric or reduce the number of redundant ISLs between two Action switches. Severity - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 232
> Probable Cause Indicates that the transmit LSR contained an invalid domain number. Recommended No action is required; the LSR is discarded. Action Severity WARNING 180 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 233
Message , [FSPF-1001], ,, ERROR, , Input Port out of range Probable Cause Indicates that the specified input port number is out of range; it does not exist on the switch. Recommended No action is required. Action Severity ERROR FSPF-1002 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 234
port. The section ID is used to identify a set of switches that share an identical topology database. The section ID is implemented inside the protocol. The error message itself will indicate the mismatched section ID. It should be set to 0 for a nonhierarchical fabric. Brocade switches support - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 235
command if this is a dual-CP system, or reboot the switch if it is a nonbladed system. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Fabric OS Message Reference 183 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 236
the read system call to the Fabric OS state synchronization (FSS) device failed. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FSS-1006 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 237
ifconfig eth1 (as root) or run supportShow/supportSave to validate the network configuration; then try to restore the synchronization by issuing the haSyncStart command. If the problem persists, contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 185 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 238
28 FSS-1007 186 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 239
command, refer to the Fabric OS Command Reference. Recommended logged as a result of a user-initiated action (such as running the problem. If the problem persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 240
with current running version. This cause a disruptive firmware upgrade/downgrade. Recommended For a dual CP system, run the firmwareDownload command to load compatible firmware on the Action standby CP. For details on this command, refer to the Fabric OS Command Reference. Severity INFO 188 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 241
No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Typically, low temperatures means that the fans and airflow of a switch are functioning normally. Verify that the location temperature is within the operational range of the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 242
that the speed of the fan has changed. Fan problems typically contribute to temperature problems. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Consistently abnormal fan speeds generally indicate that the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 243
to view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 > . Indicates that the power supply is faulty. The power supply is not producing enough power. Fabric OS Message Reference 191 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 244
installed the power supply correctly and that it is correctly seated in the Action chassis. If the problem persists, replace the faulty power that the power supply is functioning properly. Recommended Set the high particular policy of the Action end-user installation. Severity INFO FW-1034 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 245
appropriate to the particular policy of the Action end-user installation. Severity WARNING FW-1035 Message , [FW- is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has Fabric OS Message Reference 193 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 246
Low value>). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has fallen below the low boundary. the particular policy of the Action end-user installation. Severity INFO 194 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 247
=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has fallen below the low boundary. The . Recommended Replace the SFP. Action Severity WARNING Fabric OS Message Reference 195 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 248
is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1045 Message , [FW Unit>. 196 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 249
as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1049 Message , [FW-1049], - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 250
Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1113 Message , [FW-1113], ,, INFO, High value>, Low=). Current value is . 198 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 251
switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation number of fabric reconfigurations has changed. The following actions can cause a fabric reconfiguration: • two switches with the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 252
link has segmented from the fabric. A low number of fabric reconfigurations means that the fabric is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1119 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 253
a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1122 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 254
a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1124 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 255
switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 256
a change to the effective zone configuration. A low number of zone configuration changes means that the fabric is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1131 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 257
logins has changed. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 258
above the high boundary. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 259
to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1160 Message Probable Cause , [FW-1160], ,, INFO, , , , value has changed(High=, Low=). Current value - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 260
errors and, if applicable, troubleshoot them. A low number of link loss errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1162 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 261
troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity INFO FW-1165 Message , [FW-1165], ,, INFO, , - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 262
you continue to experience loss-of-synchronization errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity WARNING FW-1167 Message , [FW-1167], ,, INFO, , , , is between high and low boundaries - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 263
installation. A low number of signal loss errors means that the switch is functioning normally. Severity INFO FW-1170 Message , [FW-1170], ,, WARNING, , - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 264
occur due to software glitches. Persistent protocol errors occur due to hardware problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 212 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 265
a hardware problem with an small form-factor pluggable (SFP) or cable. A low number of invalid words means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 266
to the particular policy of the Action end-user installation. A low number of invalid CRCs means that the switch is functioning normally. Severity INFO FW-1182 Message Probable Cause , [FW-1182], ,, WARNING, , , , is above high boundary - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 267
the percentage of incoming traffic that the port experiences has fallen below the low boundary. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO Fabric OS Message Reference 215 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 268
. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1188 Message , [FW-1188], ,, INFO, , , , value has changed(High=, Low=). Current value is - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 269
faulty, has become an E_Port, has become an F_Port, has segmented, or has become a trunk port. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO Fabric OS Message Reference 217 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 270
, has segmented, or has become a trunk port. A low number of port state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1194 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 271
numbers of messages indicate a problem in this area. A low level of invalid CRC errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1218 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 272
equipment. You should set your high boundaries to five- or six-digit figures, as only large numbers of messages indicate a problem in this area. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 273
. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. A low number of CRC errors means that the fabric is functioning normally. The CRC error area of the End-to-End Performance Monitor class helps you tune your - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 274
that the switch receives has changed. Receive performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 275
appear due to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO Fabric OS Message Reference 223 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 276
changed. The port has received small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 277
that are authorized to establish Telnet connections to switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 278
that are authorized to establish Telnet connections to switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 279
are authorized to establish browser connections to the switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 280
that are authorized to establish API connections to switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 281
that are authorized to establish API connections to switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 282
IP address. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user that an SNMP "get/set" operation request has been received from an unauthorized IP address. 230 Fabric OS Message Reference 53-1000600 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 283
command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security an SNMP "get/set" operation request has been received from an unauthorized IP address. Recommended No action is required. Action Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 284
ports that are allowed to access the SES Server functionality. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security class messages depend on user small computer system interface (SCSI) Enclosure Services (SES) request has been received - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 285
system interface (SCSI) Enclosure Services (SES) request has been received list of WWNs of device ports that are allowed to access the list of WWNs of device ports that are allowed to access class messages depend on user policies. Consult your of device ports that are allowed to access - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 286
. The SERIAL_POLICY contains a list of switch world-wide names (WWNs) for which serial port access is enabled. Recommended Action Run the errShow command to determine the WWN of the device that sent the request. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 287
Serial violations indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch world-wide names (WWNs) for which serial port access is enabled. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 235 53-1000600 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 288
access is enabled. Recommended Action Run the errShow command to determine the Runoff the device that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING 236 Fabric OS Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 289
. The SCC_POLICY contains a list of switches by world-wide name (WWN) that are allowed to be members of a fabric. Recommended Action Run the errShow command to determine the WWN of the device that sent the request. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 290
Action Run the errShow command to determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity INFO 238 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 291
binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 292
for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI command to determine the IP location of the login attempt. Responses to security-class messages depend on user policies. Consult your - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 293
to determine the IP location of the login attempt. Responses to security-class messages depend on user policies. Consult fabric configuration server (FCS). When the primary FCS downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 294
been received from the primary world-wide name (WWN). When the primary fabric configuration server (FCS) downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch compares this timestamp to its current time. If the difference is too - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 295
received from the primary fabric configuration server (FCS). When the FCS downloads a new configuration to the other switches in the fabric, the packet is messages depend on user policies. Consult your security administrator Action for response strategies and policies. Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 296
the primary fabric configuration server (FCS). When the primary FCS downloads a new configuration to the other switches in the fabric, the switch. This counter keeps track of the number of packets received with invalid certificates. Recommended Responses to security-class messages depend on user - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 297
invalid certificate has been received from the primary fabric configuration server (FCS). Before a new primary FCS switch sends any configuration data to any switch in the fabric, it first sends its certificate to all the switches in the fabric. The receiving switch has to verify that the sender is - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 298
the low boundary. Authentication failures can occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port where authentication fails is segmented. This counter keeps track of the number - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 299
switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port Responses to security-class messages depend on user policies. Consult your security administrator Action for Fabric OS Message Reference 247 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 300
> . Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has risen above service (TS) out-of-sync violations has changed. Recommended Responses to security-class messages depend on user . 248 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 301
that there are no FCSs in the fabric, but it still has the WWN of the last primary FCS switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 302
that there are no FCSs in the fabric, but it still has the WWN of the last primary FCS switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 303
only to another switch that is in secure mode and has a compatible security database. A compatible security database means that the version stamp and fabric configuration server (FCS) policy matches exactly. Recommended Responses to security-class messages depend on user policies. Consult your - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 304
only to another switch that is in secure mode and has a compatible security database. A compatible security database means that the version stamp and fabric configuration server (FCS) policy matches exactly. Recommended Responses to security-class messages depend on user policies. Consult your - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 305
fabric configuration server (FCS) switch have been executed on a non-primary FCS switch. There are many commands that can be executed only on the primary FCS switch commands on a switch where it is not allowed. Recommended Responses to security-class messages depend on user policies. Consult your - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 306
switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation of the switch. Excessive permanent increases can lead to future problems. Recommended You - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 307
appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1426 Message Probable Cause , [FW-1426], ,, WARNING, , Switch status change contributing factor Power supply: bad, absent. Indicates - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 308
bad. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of faulty power supplies is greater than or equal to the policy set by the switchStatusPolicySet command. Recommended Replace the faulty power supply. Action Severity WARNING FW-1428 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 309
the policy set by the switchStatusPolicySet command. Recommended Replace the faulty WWN card. Action Severity WARNING FW-1433 Message , [FW-1433], ,, WARNING, , Switch status change contributing factor CP: CP non-redundant. Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 310
the number of faulty CPs is greater than or equal to the policy set by the switchStatusPolicySet command. The CPs are non-redundant. If you power cycle a Brocade 24000 chassis in dual-domain configuration, and then reset the micro-switch of the active CP before the heartbeat is up, this will cause - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 311
FW-1437 Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of marginal ports is greater than or equal to the policy set using the switchStatusPolicySet command. A port is faulty when the port value for Link Loss, Synchronization Loss, Signal - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 312
unit (FRU) has changed to "inserted". This means that an FRU is inserted but not powered on. Recommended No action is required. Verify that the event was planned. Action Severity INFO FW the specified field-replaceable unit (FRU) changed to "off". 260 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 313
been present are: 2 out of service indicates switch status is DOWN, 1 out of service indicates switch status is MARGINAL Recommended Action To maintain full (2X) redundancy and proper monitoring by Fabric Watch, 4 active power supplies should be supplied and the default values associated with the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 314
occur due to software glitches. Persistent errors occur due to hardware problems. Recommended Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then enable the Action port using the portEnable command. Severity INFO 262 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 315
blade by ejecting the card and reseating it. If the problem persists, replace the standby CP. Severity CRITICAL HAM-1002 Message records switch processor reboot reasons that were initiated by the user or the switch errors. The switch processor Fabric OS Message Reference 263 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 316
active CP will run diagnostic test on the EMAC controller and will wait for the standby CP to reset it if it is down. Recommended No action is required. Action Severity INFO HAM-1006 Message Probable by the diagnostic test run by the ham module. 264 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 317
31 HAM-1006 Recommended The standby CP will take over and reset the active CP.The system will be non-redundant as the Action standby becomes the active CP. Severity CRITICAL Fabric OS Message Reference 265 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 318
31 HAM-1006 266 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 319
to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. an operator-initiated action such as firmwareDownload, the standby CP blade being reset or removed, or as a result of an error in the standby Fabric OS Message Reference 267 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 320
, Resetting standby CP (double reset may occur). Probable Cause Indicates that the standby control processor (CP) is being reset due to been rebooted. Note that in certain circumstances a CP may experience a double reset and reboot twice in a row. A CP can recover automatically even - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 321
blade or switch (for nonbladed switches). Action power supply status. Try to reseat the faulty fan field-replaceable unit (FRU) and power supply FRU to verify that they are seated properly. If the problem persists, replace the fan FRU or the power supply FRU as necessary. Severity ERROR Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 322
units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100, 4900, 5000, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other voltage is faulty, replace the entire switch. Severity ERROR 270 Fabric OS Message Reference 53 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 323
voltage>) below threshold. System preparing for reset. Probable Cause Indicates that the switch voltage is below threshold. This message is specific to nonbladed switches and is not applicable to the Brocade 24000, or 48000. Recommended Action For the Brocade 200E, 3250, 3850, 4012, 4016, 4018 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 324
not applicable to the Brocade 24000, or 48000. Recommended Action For the Brocade 3900 replace the fan field-replaceable unit (FRU). For the Brocade 3016, 3250 and 3850, the entire switch must be replaced, because these switches do not have FRUs. Severity ERROR 272 Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 325
problem can quickly cause the switch to overheat. This message is specific to nonbladed switches and is not applicable to the Brocade 24000, or 48000. Recommended For the Brocade operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 326
. This message is often preceded by a low speed error message. This problem can cause the switch to overheat. Recommended Replace the affected fan FRU immediately. Action Severity WARNING Recommended Replace the faulty fan FRUs immediately. Action 274 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 327
-name>, All fans failed. Replace failed fan FRUs immediately. Indicates that all fans have failed. This message is often preceded by a low fan speed message. Fabric OS Message Reference 275 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 328
faulty and non-faulty behavior. Replace the switch because the fan is not field-replaceable. Severity INFO HIL-1401 Message , [HIL-1401], ,, WARNING, , One fan FRU missing. Install fan FRU immediately. 276 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 329
1404], ,, WARNING, , fan FRUs missing. Install fan FRUs immediately. Probable Cause Indicates that one or more fan field-replaceable units that the temperature of this blade has risen above the warning threshold. Fabric OS Message Reference 277 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 330
the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists Indicates that temperatures in the system have returned to normal. 278 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 331
problems, make sure that all the fans are working properly. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Severity CRITICAL Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 332
the system can continue operation. Recommended Action To help prevent future problems, make sure that all the fans are working properly. Make sure of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Severity WARNING 280 Fabric OS Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 333
> fans out of service. System is shutting down immediately. Probable Cause Indicates that total fan failure count is greater than or equal to two. Recommended In order to avoid causing damage to the switch, the system shuts down automatically. To help Action prevent future problems, make sure that - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 334
33 HIL-1650 Severity ERROR 282 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 335
from port , correct value . Probable Cause Indicates that the HLO message was incompatible with the value specified in the FSPF protocol. The Brocade switch will not accept FSPF frames from the remote switch. In the Fabric OS, the HLO dead timeout value is not configurable, so - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 336
an invalid HLO because either the domain or port number in the HLO message has an invalid value. This error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended The HLO message of the remote switch must be compatible with the value specified in - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 337
the firmwareDownload command to reinstall the firmware to your switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 285 53-1000600 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 338
35 HMON-1001 286 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 339
INFO, , Switch PIDformat has changed to . Probable Cause Indicates that the PID format was changed by the administrator. Recommended No action is required. For more information on PID, format refer to the Fabric OS Administrator's Action Guide. Severity INFO HTTP - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 340
36 HTTP-1003 288 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 341
port has crashed unexpectedly and restarting attempts have failed. Recommended Power off and power on the blade using the slotPowerOff and slotPowerOn commands. On the Action Brocade 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 342
37 IBD-1001 290 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 343
>, iSCSI login sessions exceed the maximum limit at slot port ge Probable Cause Indicates that the iSCSI login sessions exceed the supported limit per port. Recommended Use another port to login. Action Severity WARNING Fabric OS Message Reference 291 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 344
38 IBPD-1003 292 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 345
ICPD-1004 Message Probable Cause , [ICPD-1004], ,, WARNING, , iSNS Client service is detected on multiple switches in fabric. Indicates that iSNS Client service is enabled on multiple switches in fabric. Fabric OS Message Reference 293 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 346
Client service on a single switch in the fabric using the fosConfig command. Refer Action to the Fabric OS Command Reference for more information on this command. Severity WARNING ICPD-1005 Message , [ICPD-1005], ,, WARNING, , iSCSI configuration between - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 347
Recommended No action is required. Action Severity INFO 39 ICPD-1008 Fabric OS Message Reference 295 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 348
39 ICPD-1008 296 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 349
and prefix> Probable Cause Indicates that a change in local IP address has occurred. If the source of the address change is manual, this means that the address change was initiated by a user. If the source of the address change is the dynamic host configuration protocol (DHCP - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 350
40 IPAD-1001 DRAFT: BROCADE CONFIDENTIAL 298 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 351
the supportSave command and contact your switch service provider. Severity WARNING IPS-1004 Message , [IPS-1004], ,, WARNING, , Port Config Mode Mismatch slot () port(ge): current mode is () Fabric OS Message Reference 299 53 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 352
one side of the tunnel to authorize remote side to setup tunnel. Action Severity WARNING IPS-1006 Message , [IPS-1006], ,, WARNING, , Tunnel Configuration Mismatch for slot () port() tunnel ID() reason () Probable Cause - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 353
-number>,, ERROR, , Slot Port GE crashed unexpectedly. Probable Cause Indicates that specified port has crashed. Recommended No action is required; the port will restart automatically. Action Severity ERROR Fabric OS Message Reference 301 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 354
42 ISCS-1000 302 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 355
that the IP address of internet storage name service (iSNS) server is set to zero, so peering is disabled. Recommended If you wish to enable the iSNS server, use the isnscCfg command to show or set the server IP Action address; otherwise, no action is required. Severity INFO Fabric OS Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 356
re-register with external iSNS server slot/port /ge. Probable Cause Indicates that the user has requested a re-register with the specified external internet storage name service (iSNS) server. Recommended No action is required. Action Severity - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 357
. Refer to the appropriate hardware reference manual for valid slot and Action port ranges. Severity WARNING ISNS-1011 Message , [ISNS-1011], ,, INFO, , iSNS Client Service is . Probable Cause Indicates the current - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 358
iSNS server on management port. Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS) on the management port. Recommended No action is required. Action Severity INFO 306 Fabric OS Message Reference 53 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 359
found, run supportFtp to send all core files to a secure server location. Copy the warning message along with any core file information, and contact your switch service provider. Severity WARNING Fabric OS Message Reference 307 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 360
44 KSWD-1003 308 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 361
-1004], ,, ERROR, , Cannot write to ATA dump device Indicates that the write boundry in the ATA dump device has been exceeded. Fabric OS Message Reference 309 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 362
failed. . . Probable Cause Indicates that Trace was unable to initialize. Recommended No action is required. Action Severity ERROR 310 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 363
reboot command for nonbladed switches or the haFailover command on bladed switches. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 311 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 364
>, The log has been cleared. Probable Cause Indicates that the persistent error log has been cleared. Recommended No action is required. Action Severity INFO 312 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 365
range is from 1 through 239. The switch will discard the record because it is not supported. Recommended No action is required. Action Severity switch generates its local link state record when first enabled. By disabling and enabling the switch, a new local link state record is generated. Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 366
. A new local link state record is generated Action during the switch enable. Severity CRITICAL LSDB-1004 Message , [LSDB-1004], - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 367
set up automatic FTP transfers; then run the supportSave command and contact your switch service Action default values are desired for the switch node descriptor fabric-wide mode; make sure that any switches added to the fabric are configured with the same IDID mode as the fabric. If you are enabling - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 368
-1003 IDID mode can be set using the configure command in the CLI or checking the Advanced Web Tools Switch Admin > Configure Tab > Fabric Subtab > Insistent Domain ID Mode checkbox. The switch must be disabled to change the IDID mode. Severity WARNING 316 Fabric OS Message Reference 53-1000600 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 369
FSPF module has determined that there is no minimum cost path (MPath) available in the candidate list. Recommended No action is required. Action Severity WARNING Fabric OS Message Reference 317 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 370
49 MPTH-1003 318 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 371
• 7 - MSG_LINIT_IU • 8 - MSG_RSCN • 9 - MSG_IOCTL • 10 - MSG_ACCEPT • 11 - MSG_IU_FREE • 12 - MSG_US • 13 - MSG_EXT_RSCN • 14 - MSG_RDTS_START • 15 - MSG_RDTS_SENDEFP • 16 - MSG_RDTS_RESET Recommended No action is required. Action Severity ERROR Fabric OS Message Reference 319 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 372
50 MQ-1004 320 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 373
MS platform service is not set. Recommended Action: Set the flag for the MS Platform Service. • The GCAP (MS Get Capabilities) is not supported by another switch. Recommended Action: Upgrade the firmware level on the switch to a level that supports RCS. • - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 374
by> Run the firmwareDownload command to upgrade the firmware level on the switch to a level that supports RCS. RCS is supported in Fabric OS v2.6, v3.1 and greater, needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 375
(CT) response from switch domain. MS expects either Services (FS-GS) specification. Recommended Check the integrity of the FC switch set up automatic FTP transfers; then run the supportSave command and contact your switch service message to the MS Extended Link Service Queue. • - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 376
to SAN hardware problems such as Fabric OS state synchronization (FSS) warm recovery failed during WARM INIT phase of a reboot. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 377
>, Management Server Topology Discovery Service Probable Cause Indicates that Management Server Topology Discovery Service is being enabled or disabled. Recommended No Recommended No action is required. Action Severity INFO Fabric OS Message Reference 325 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 378
51 MS-1024 326 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 379
two connected switches has problems. Recommended Action Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is FULL, then this message can safely be ignored. Otherwise, run the portDisable and portEnable commands to refresh the port. Fabric OS Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 380
on the specified port. Neighbor finite state machine (NBFSM) states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full Recommended No action is required. The Fabric OS auto recovers from this problem. Action Severity WARNING - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 381
payload exceeds the maximum frame size that the remote switch can handle. Recommended Action Run the firmwareDownload command to upgrade the remote switch with firmware v4.3 or higher, as appropriate for the switch type, so that it can support GMI to handle frame fragmentation and reassembly. You - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 382
standby CP has lower supported capability than the active CP due to different firmware versions running on the or lesser, or upgrade the software of the remote switch to support Action 2048 zones. The switch will process the new PID and leave the existing PID intact. Subsequent switch operations - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 383
by a missing configuration file during the installation. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 384
configuration file sync.conf contains too many entries. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 385
Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 333 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 386
the switch configuration file /etc/fabos/fabos.[0|1].conf is empty. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 387
reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. length for the files to be replicated. Action Severity WARNING Fabric OS Message Reference 335 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 388
peer because the firmware does not support IPv6. Recommended Action Configure the local switch with IPv4 addresses. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 389
Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 337 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 390
54 PDM-1024 338 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 391
the watch dog timer (WDT) forced a core reset. • 0x20000000 bit set means that the WDT forced a chip reset. • All other code values are reserved. Recommended Run the pdShow command to view the panic dump and core dump files. Action Severity INFO Fabric OS Message Reference 339 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 392
55 PDTR-1002 340 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 393
set up automatic FTP transfers; then run the supportSave command and contact your switch service certain circumstances a CP may experience a double reset and reboot twice in a row. A CP problem. If Action the problem still persists, then replace the CP. Fabric OS Message Reference 341 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 394
], , FFDC, CRITICAL, , Slot C/BE: ADBUS: misc_intr . Probable Cause Indicates that a PCI bus hang was detected. Recommended The FRU must be replaced - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 395
buffers and allow this port to be enabled. Severity INFO PORT-1005 Message Probable Cause , [PORT-1005], ,, WARNING, , Slot port does not support configured L_port. Issue portCfgLport to clear configuration. Indicates that the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 396
57 PORT-1005 Recommended Invoke the portCfgLport to clear the L_port configuration. Action Severity WARNING 344 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 397
power cycle the switch to Action reinitiate the firmware. Severity CRITICAL PS-1001 Message , [PS-1001], ,, INFO, , Advanced Performance Monitoring configuration Failed to set end-to-end monitoring mask on ISL ports. Fabric OS Message Reference 345 53-1000600 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 398
the restoring configuration has attempted to set the end-to-end monitoring mask on at least one ISL port. Recommended No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is Action enabled. ISL monitoring can only be disabled through the Fabric Access API - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 399
name>, Port Swap feature enabled. Probable Cause Indicates that the portSwap feature has been enabled in the switch. Port Swap feature disabled. Probable Cause Indicates that the portSwap feature has been disabled in the switch. Recommended No action is required. Action Severity INFO Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 400
59 PSWP-1003 348 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 401
set up automatic FTP transfers; then run the supportSave command Action and contact your switch service Run the supportSave command and contact your switch service provider. Action Severity WARNING RAS-1004 supportSave command and contact your switch service provider. Action Severity WARNING RAS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 402
Indicates that the support data file is transferred from the switch automatically. Recommended No action is required. Action Severity INFO RAS-2001 Message , [RAS-2001], , INFO, , Audit message log is enabled. Probable Cause A user has enabled the audit - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 403
RAS-3001 Probable Cause A user has changed the configured classes of the audit feature. , USB storage device enabled. Probable Cause Indicates that the USB storage device is enabled. Recommended No action is required device is disabled. Fabric OS Message Reference 351 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 404
60 RAS-3004 Recommended No action is required. Action Severity INFO 352 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 405
upgrade the firmware for any switches that do not support RCS. Severity INFO RCS-1002 Message , [RCS-1002], ,, INFO, , RCS has been enabled. Probable Cause Indicates that the RCS feature has been enabled. RCS must be capable on all switches in the fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 406
. Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS v2.6, v3.1 and greater, v4.1 and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity ERROR RCS-1005 Message , [RCS-1005 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 407
ERROR, , Zone DB size and propogation overhead exceeds domain 's maximum supported Zone DB size . Retry after reducing the Zone DB size. Probable Reduce the zone database size. Action Severity ERROR Fabric OS Message Reference 355 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 408
61 RCS-1008 356 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 409
IP address has faulty credentials. Recommended Enter the correct user name and password from the Fabric Recommended To enable RPCD in Secure mode, install a valid SSL certificate on the switch. Action Indicates that the SSL certificate file configured on the switch could not be accessed because - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 410
is disabled. Probable Cause Indicates that the SSL certificate file has been corrupted. Recommended To enable RPCD in Secure mode, install a valid SSL certificate the switch. Action Severity WARNING RPCD-1005 Message , [RPCD-1005], ,, WARNING, , Missing - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 411
the specified domain ID is online. Enable the switch with the specified domain ID. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 359 53 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 412
Run the dom command to verify that the specified domain ID is reachable. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO 360 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 413
,, ERROR, , string description of command which failed> of GE failed. Please retry the command. Data inst= st= - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 414
64 SAS-1001 362 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 415
the SCN queue for the specified daemon name is full. This might be caused by the daemon hanging or switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 416
65 SCN-1001 364 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 417
be capable on all switches in the fabric to be enabled. If all switches are capable, RCS is automatically enabled. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 418
the database download. The primary switch will segment the failed switch after 30 tries. Recommended Action Reset the version stamp on the switch to 0 using the secVersionReset command and then rejoin the switch to the fabric. If the message persists, run supportFtp (as needed) to set up automatic - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 419
HTTP connection. Probable Cause Indicates that a security violation was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the HTTP connection. Action Severity INFO SEC-1009 Message , [SEC - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 420
objects exist on the switch. If the private key does not exist, follow the steps for re-creating PKI objects, outlined in the Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the certificate by following the field upgrade process. Severity WARNING SEC - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 421
occurred during the distribution of the security database. This can occur only when the primary fabric configurations server (FCS) distributes the security database to the other switches in the fabric, then local validation finds the error in the security database. This is a rare occurrence - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 422
Probable Cause Indicates that the security database size is not supported by the standby control processor (CP). Recommended Reduce the occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 423
command supports use of the asterisk for adding switches to policies. Recommended Action Run the secPolicyAdd command using a valid switch identifier (WWN, domain ID, or switch name) to add specific switches to the switch connection control (SCC) policy. Refer to the Fabric OS Command - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 424
. Valid numbers must be between one and three characters long. • The value cannot be parsed due to invalid characters. Recommended Use valid syntax when entering port members. Action 372 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 425
-name>, Too many port members. Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 426
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 427
brace for port list . Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 428
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 429
primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric or domains more than the maximum number supported are specified. Recommended Enter the correct ERROR, , Failed to reset statistics. Probable Cause Indicates that either - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 430
the security database is corrupted for unknown reasons. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1071 Message , [SEC-1071], ,, ERROR - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 431
(as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR on a switch that is not allowed to run it either because it is in non-secure mode or because it does not have required fabric configurations server (FCS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 432
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 433
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 434
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 435
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 436
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 437
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 438
-number>,, ERROR, , Please enable your switch before running secModeEnable. Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 439
the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local enable security on all switches. Please retry later. Probable Cause Indicates that the security enable failed on the fabric because one or more switches in the fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 440
-1105 Recommended Action Verify that the primary switch has a valid certificate installed and retry the operation. If a valid certificate is not installed, install a certificate by following the procedure specified in the Secure Fabric OS Administrator's Guide. Severity ERROR SEC-1105 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 441
Fail to reset stamp on all switches. Probable Cause Indicates that a version reset operation failed either because the switch could not get active FCS list. Fail to download defined database. Probable Cause Indicates that the defined and active fabric configurations server (FCS) policy list - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 442
Probable Cause Indicates that either a security policy download is attempted with an active policy that does not have the fabric configurations server (FCS) policy as the first policy or the FCS policy is not same as the current FCS policy on the switch. Recommended Make sure that the new FCS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 443
INFO, , Fail to set . Probable Cause Indicates that the switch failed to save the data received by the primary fabric configurations server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data. Recommended Run the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 444
Probable Cause Indicates that one of the switches in the fabric could not communicate with the primary fabric configurations server (FCS). Recommended Run the secFabricShow command to verify that all switches in fabric are in the ready state. When Action all switches are in the ready state, retry - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 445
, The Primary FCS has failed over to a new switch. Probable Cause Indicates that an FCS failover operation was completed successfully -name>, Secure fabric version stamp has been reset. Probable Cause Indicates that the version stamp of the secure fabric is reset. Recommended Action - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 446
[SEC-1138], ,, INFO, , Security database download received from Primary FCS. Probable Cause Indicates that a non-primary fabric configurations server (FCS) switch received a security database download. Recommended Action Verify that the security event was planned. If - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 447
fabric configurations server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service policies have changed. • The passwords have changed for the specified accounts - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 448
must be capable on all switches in the fabric to be enabled. If all switches are capable, it is automatically enabled. For any switch that does not support RCS, obtain the latest firmware version from your switch supplier, and run the firmwareDownload command to upgrade the firmware. If the message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 449
minutes and then resubmit the transaction. Fabric-wide commands might take a few minutes to propagate throughout the fabric. Make sure to wait a few (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO SEC - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 450
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 451
-name>, Lockdown option cannot be applied on a non-FCS switch. Probable Cause Indicates that the attempt to enable security is made on a switch that is not present in the fabric configurations server (FCS) list. Recommended Add the switch into the FCS policy list when using the lockdown option to - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 452
a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 453
, [SEC-1174], ,, ERROR, , Failed to set password. Probable Cause Indicates that the FCS or non-FCS password could not be set. Recommended Verify that all switches in the fabric are in time synchronization with the primary and that no Action - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 454
fabric configurations server (FCS) failed to generate a new version stamp due to the fabric not being stable. Recommended Verify that all switches in the fabric 1181], ,, INFO, , Deleted account Probable Cause Indicates that the specified account has been - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 455
, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1184 Message , [SEC-1184], ,, INFO, , configuration change, action , server ID - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 456
, [SEC-1186], ,, INFO, , Configuration. Probable Cause Indicates that the remote authentication dial-in user service (RADIUS/LDAP) configuration was enabled or disabled as the primary authentication, accounting, and authorization (AAA - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 457
through an HTTP connection. If so, add the host IP address to the HTTP policy of the fabric. If the host is not allowed access to the fabric, this is a valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise security - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 458
PKI objects correctly installed. Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 459
>,, WARNING, , Switch does not have all default account names. Probable Cause Indicates that the default switch accounts admin and user do not exist on the switch when enabling security. Recommended Reset the default admin and user account names on the switch that reported the warning - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 460
access to serial port of switch . Probable -primary fabric configurations server (FCS) switch. Recommended enable the connection is MS policy. If the MS policy does not allow the connection, this is a valid violation message and an unauthorized entity is trying to access your fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 461
device port name - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 462
using the interopMode command before enabling the Secure Fabric OS Action feature. Severity INFO SEC-1302 Message , [SEC-1302], ,, INFO, , This switch does not have all the required PKI objects correctly installed. 410 Fabric OS Message Reference 53 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 463
occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds firmware to the latest version for your specific Action switch. Verify that the firmware you are installing supports the Brocade Secure Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 464
to respond to a switch request within the specified time-out. Recommended Verify that the switch has proper network connectivity to the specified remote authentication dial-in Action user service (RADIUS) servers, and the servers are correctly configured. 412 Fabric OS Message Reference 53 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 465
that Secure Fabric OS is still waiting for the reliable commit service (RCS) password policies is not set to default value. Probable Cause Indicates that the security enable failed on the fabric because one or more switches in the fabric have password policies that are not set to the default - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 466
error. If the problem persists contact your switch service Action provider. Severity ERROR SEC-1315 Message , [SEC-1315], ,, ERROR, , command failed - db(s) configured for rejection on this - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 467
Number> Probable Cause Indicates that the newly added switches to the fabric, as specified by Domain Number, have a conflicting policy with the local switch. Recommended Check the conflicting policy and make the new switches and the local switch policies the same. Action Severity WARNING SEC - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 468
command. Reason: . Probable Cause Indicates that the security enable failed on the fabric because switch has conflicting configuration such as fabric wide consistency configuration or AD configuration. Recommended Action Verify that the security event was planned. If the security event - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 469
attempt to join the switch with the fabric. Severity ERROR SEC-1326 Message , [SEC-1326], ,, INFO, , Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set to . Probable Cause Indicates - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 470
>. Probable Cause Indicates that the IP filter policy enforcement failed due to internal system failure. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1330 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 471
, , Attempt to enable secure mode failed. Reason: . Probable Cause Indicates that the secModeEnable command failed on the fabric, because default IP Filter policies are not active on the switch, or an active transaction exists on IP Filter policies. Recommended Action Verify - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 472
66 SEC-1332 420 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 473
the simple network management protocol (SNMP) service could not be started because of the specified Reason. You will not be able to query the switch through SNMP. Recommended Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the Action specified Reason is - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 474
group> configuration was reset to default Probable Cause Indicates that the simple network management protocol (SNMP) configuration group was reset to the factory default. Recommended Execute the snmpConfig --show for the group to see the new configuration. Action Severity INFO 422 Fabric OS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 475
. Run the supportFtp command to set the FTP or SCP parameters. Action After the problem is corrected, rerun the supportSave command. Severity WARNING SS-1002 Message , [SS-1002], ,, INFO, , supportSave has stored support information to the USB storage - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 476
message due to possible errors in subcommands being executed by the supportSave command. Recommended Run usbstorage to check the USB storage device settings. After the USB problem is corrected, Action rerun the supportSave command. Severity WARNING 424 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 477
is set to time out after 30 minutes. Recommended Action Do not fail over or power down the system during firmware upgrade. Allow firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No INFO Fabric OS Message Reference 425 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 478
[SULB-1004], INFO, FIRMWARE, , failover succeeded. New Active CP is running new firmware. Probable Cause Indicates that the previous standby and is running the new firmware version. Recommended Action No CP is rebooting with new firmware. Recommended Action No action is - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 479
because firmwareDownload is already in progress." "Sanity check failed because FABRIC OS is disabled on Standby CP." "Sanity check failed because HAMD "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 480
Standby CP failed to boot up." "Standby CP booted up with new firmware." "Standby CP failed to boot up with new firmware." "firmwareDownload has completed successfully on Standby CP." "firmwareDownload has started on 0x77 0x78 0x79 0x7a 0x7b 0x7c 0x7d 428 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 481
has been downloaded successfully. Blade is rebooting with the new firmware." 0xa4 "Blade has rebooted successfully." 0xa5 "New firmware failed to boot up. Please retry firmwareDownload." 0xa6 "firmwareCommit has started on the blade. This may take up to 10 minutes." 0xa7 Fabric OS Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 482
. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 483
messages: 0x15 - Failed to download Red Hat package manager (RPM) package. If this error occurs immediately after firmwareDownload is started, the firmware on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware upgrades within two feature releases - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 484
. 0x29 - The pre-install script failed. This error may be caused by an unsupported blade type in the chassis. Remove or power off the unsupported blades before proceeding. Another possible cause may be an invalid chassisConfig option setting. In that case, reset the chassisConfig option before - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 485
upgrade the firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting filesystem, contact your switch service provider. Action Severity INFO - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 486
the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message Probable Cause , [SULB-1021],, AUDIT, WARNING, , Firmware is being downloaded to the blade in slot - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 487
the firmware versions. for example, by powering off and on problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message , [SULB-1024], AUDIT, WARNING, , Firmware firmware versions. If the blade firmware is the same as the active CP firmware - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 488
to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message , [SULB-1031], , AUDIT, WARNING, , The switch is relocating an internal firmware image. 436 Fabric OS Message Reference 53-1000600 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 489
internal firmware image. It may also be caused by the internal Ethernet or persistent storage hardware failure. Recommended Reset the switch. This will cause the internal image to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR Fabric OS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 490
generally logged before download and after download of the firmware to store version information. Recommended No action is required. Action Severity INFO SULB-1037 Message , [SULB-1037], , AUDIT, INFO, , HCL failed. Reboot the switch manually using the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 491
as inconsistent during failover or recovery. Recommended Action On a Brocade 24000 or 48000 switch, run the slotPowerOff command and then the slotPowerOn command. On a Brocade 7500 or AP7600 switch, reboot or power cycle the switch. Severity ERROR Fabric OS Message Reference 439 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 492
into the fabric. Recommended Load a firmware version on standby that supports NPIV functionality, using the firmwareDownload Action command. Severity WARNING SWCH-1007 Message Probable Cause , [SWCH-1007], ,, WARNING, , Switch port disabled - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 493
the blade is enabled with the port configuration that already has area swapped. Recommended Action Replace the blade with ports that support port swap. Then port swap the ports back to ports default area. Refer to the Fabric OS Administrator's Guide for more information on port swapping. Severity - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 494
processor (CP) does not support Trunk Area functionality, but the switch has some ports with Trunk Area enabled. Recommended Load a firmware version on standby that supports Trunk Area functionality, using the Action firmwareDownload command. Severity WARNING 442 Fabric OS Message Reference 53 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 495
to change chassis configuration> Indicates that on system startup, the option configuration file corresponding to the chassisConfig option read could not be found. This indicates that option is not supported on this platform running this version of the firmware. Fabric OS Message Reference 443 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 496
card). This message occurs only on the Brocade 24000 and 48000. Recommended Action As indicated firmware. Note that the chassisConfig option 1 should be valid for all platforms running any valid firmware to gather troubleshooting data. No supportSave command to gather troubleshooting data. Issue a - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 497
Action Run the memShow command to view the switch memory usage. Reboot or power cycle the switch. Run supportFtp as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL SYSM-1002 Message , [SYSM - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 498
, Failed to retrieve current chassis configuration option, ret= Probable Cause Indicates that there was a failure to read configuration data from the WWN card. Recommended Verify file and reboot the CP. Action Severity WARNING 446 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 499
WATCHDOG EXPIRED generated by hardware watchdog expiration • MANUAL generated by the tracedump -n command Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity WARNING TRCE-1002 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 500
) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR TRCE-1006 Message , [TRCE-1006], ,, INFO, , FTP Connectivity Test succeeded to FTP site ' - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 501
to the Brocade 24000, and 48000. Recommended Action This message is often transitory. Wait a few minutes and try the command again. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 502
system and the indicated slot is unavailable. Recommended Check that the AP blade is enabled and retry the command. If the AP blade is already enabled, run Action the supportSave command and contact your switch service provider. Severity WARNING 450 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 503
the user name or password is entered incorrectly. Recommended Action Normally, this message indicates a typing error by an authorized user. If this message occurs repeatedly, it might indicate an unauthorized user trying to gain access to a switch. When Secure mode is enabled on the fabric, the IP - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 504
change feature recorded a configuration change for the switch. The track change feature records any change to the configuration file in nonvolatile memory, Run the trackChangesSet 1 command to enable the track changes feature. Action Severity INFO 452 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 505
FCS switch has the clock server IP configured correctly. Verify that this clock server is accessible to the switch and functional. If the principal or primary FCS does not support the feature, either choose a different switch for the role or reset the clock server to LOCL. Severity INFO Fabric OS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 506
be one of the following: • Init failed. Time Service exiting Probable Cause: Initialization error, Time Server exits. switch is trying to set the tsclockserver, which is not the primary fabric configuration server (FCS) across the fabric. A consistent FCS policy must be implemented across the fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 507
Severity WARNING 75 TS-1008 Fabric OS Message Reference 455 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 508
75 TS-1008 456 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 509
, , Inconsistent route detected: Port = , should be Probable Cause Indicates that the switch detected an inconsistency in the routing database between the routing protocol and the hardware configuration. The first port number displayed is what the hardware - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 510
76 UCST-1020 458 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 511
, [UPTH-1001], ,, WARNING, , No minimum cost path in candidate list Probable Cause Indicates that the specified switch is unreachable because no minimum cost path (FSPF UPATH) exists in the candidate list (domain ID list). Recommended No action is required - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 512
77 UPTH-1001 460 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 513
Invalid Key file -- HTTPS is configured but could not be started. Probable Cause Indicates that the SSL key file is either invalid or absent. Recommended Install a valid key file. Action that the size of HTTP logfile exceeded the maximum limit. Fabric OS Message Reference 461 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 514
will be restarted due to change of IP Address Probable Cause Indicates that the IP address of the switch changed and the HTTP server is restarted. built-in recovery process has failed to restore http services. The problem often results from invalid configuration of ssl certs. But there can be more - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 515
files of the related modules (zoned, nsd, rcsd). If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command to save these core files and contact your switch service provider. Severity ERROR Fabric OS Message Reference 463 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 516
79 ZOLB-1001 464 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 517
usually indicates problems when adding content-addressable memory (CAM) entries before the filter setup. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 518
80 ZONE-1005 In session-based zoning, the zone enforcement zoning database. If the devices on the port are defined by a mixture of port IDs and WWNs, the zone enforcement is session based. If the S_ID list of the hardware- portarea>. Severity WARNING 466 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 519
setup. Recommended Action There are two ways to avoid this problem. • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch occurs only when enabling a zone configuration. Recommended Check the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 520
supported. Probable Cause Indicates that the QuickLoop feature is not supported in the current code release. If the QuickLoop zoning configuration is enabled on the switch, it will not be supported Recommended Install the zoning license using the licenseAdd command. Refer to your switch supplier - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 521
based hard zoning (value = 3) • FA zone (value = 5) QuickLoop zones are not supported in Fabric OS v4.x and above. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 522
operation. This usually occurs if the switch on the other side of the port is busy. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity INFO ZONE-1024 Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 523
80 ZONE-1027 ZONE- switches in your fabric. Refer to the Fabric OS Administrator's Guide for information on the zone database sizes supported for each switch configuration restored from the flash was faulty. This error will save the faulty zone configuration in the zoned core file directory. Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 524
80 ZONE-1030 If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service , Switch is in interop mode. (switch, port) members not supported. Probable Cause The switch is set to interop mode - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 525
80 ZONE-1034 Probable Cause Indicates that the specified domain has the lowest memory available for the zone database in the fabric reinstall the firmware. Action Fabric OS cannot rename the zone configuration file. Typically the zone configuration is too large for the memory available on the switch - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 526
file name>: error message . Probable Cause Indicates that the Fabric OS cannot examine the zone configuration file. Typically the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 527
change was done on purpose. If no effective zone configuration Action is needed, no action is necessary. Severity INFO ZONE-1043 Message , [ZONE-1043], ,, INFO, , The Default Zone access mode is set to No Access. Probable Cause Indicates that the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 528
does not support defined database. Probable Cause Indicates that remote Brocade switch is running downlevel version of FOS that does not suppport the defined database. Recommended It is recommended to upgrade all swtiches to same release level version. Action Severity INFO 476 Fabric OS Message - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 529
Audit Log Messages Section II This section provides the Audit messages, including: •AUDIT AUTH System Messages 479 •AUDIT CONF System Messages 483 •AUDIT FW System Messages 485 •AUDIT HTTP System Messages 487 •AUDIT SEC System Messages 489 •AUDIT SNMP System Messages 505 •AUDIT SULB System - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 530
- HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 531
changed from [] to []. Probable Cause Indicates that an authentication configuration value was set to a specified value. The data type is "authentication type", "DH group type No action is required. Action Severity INFO Fabric OS Message Reference 479 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 532
due to conflicting configuration settings. Otherwise the E_Port will form without authentication. Recommended Action If the light on the specified port is off, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 533
event-location>, , Event: , Status: failed, Info: Port disabled due to receiving an authentication reject with code ' - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 534
2 AUTH-3008 482 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 535
attempted to download a configuration without disabling the switch was unsuccessful because there are one or more parameters that require the switch to be disabled. Recommended Disable the switch using the switchDisable command and download the configuration. Action Severity WARNING Fabric OS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 536
3 CONF-1022 484 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 537
, , , , Event: , Status: success, Info: Probable Cause Indicates that Port Fencing was enabled/disabled successfully. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 485 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 538
4 FW-3001 486 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 539
event-initiator-details>, , , Zoning transaction initiated by User: , Role: completed successfully. Probable Cause Indicates that the zoning database has defined by your enterprise security policy. Severity INFO Fabric OS Message Reference 487 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 540
5 HTTP-1003 488 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 541
Enabled or Disabled> on the fabric. Probable Cause Indicates that the security mode of the fabric was either enabled or fabric configurations server (FCS) failover. • A security policy has been activated. • A security policy has been saved. • A security policy has been aborted. • A non-FCS password - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 542
, , [SEC-3006], INFO, SECURITY, , , , Event: , Status: success, Info: Removed member(s) from policy . 490 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 543
SEC-3007 6 Probable Cause Indicates that a user has removed the specific members from the specified moved from position to . Probable Cause Indicates that the fabric configurations server (FCS) list has been modified. One of the members of the list has been - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 544
: Temp Passwd on domain [] for account []. Probable Cause Indicates that a user has reset the password for the specified user accounts. Recommended Action Verify that the password was intentionally reset. If the password was intentionally reset, no - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 545
for AAA services. Probable Cause Indicates that a user has changed the remote authentication dial-in user service (RADIUS) configuration. Recommended Action Verify that the RADIUS configuration was changed intentionally. If the RADIUS configuration was intentionally changed, no - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 546
Related Info>. Probable Cause Indicates that a user has changed the remote authentication dial-in user service (RADIUS) configuration. Recommended Action Verify that the RADIUS configuration was intentionally changed. If the RADIUS configuration was intentionally changed, no action is required - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 547
: Passwdcfg parameters set to default values. Probable Cause Indicates that the passwdCfg parameters are set to default values. Recommended Action login attempt via . Indicates that a failed login attempt occurred. Fabric OS Message Reference 495 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 548
manually unlock the account. Severity INFO SEC-3024 Message AUDIT, , [SEC-3024], INFO, SECURITY, , , , Event: , Status: success, Info: User account [], password changed. Probable Cause Indicates that the user's password - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 549
: , Status: success, Info: User account [] added. Role: [], Password [], Home AD [ - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 550
, Status: success, Info: Backup user account \"\" recovered. Probable Cause Indicates that back user accounts were recovered. Recommended Action Verify that the by your enterprise security policy. Severity INFO 498 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 551
Event Name>, Status: success, Info: Switch is configured to IP filter policy(ies) saved. Indicates that the specified IP filter policy(ies) have been saved. Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 552
IP filter policy failed to activate. Recommended Action Verify that the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO 500 Fabric - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 553
violation was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the specified protocol action as defined by your enterprise security policy. Severity INFO Fabric OS Message Reference 501 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 554
tests mode has been set to - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 555
security event was planned, if yes then no action is required else take appropriate Action action as defined by your enterprise security policy. Severity INFO Fabric OS Message Reference 503 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 556
6 SEC-3050 504 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 557
group> configuration was reset to default. Probable Cause Indicates that the simple network management protocol (SNMP) configuration group was reset to the factory default. Recommended Execute the snmpConfig --show command to display the new group configuration. Action Severity INFO Fabric OS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 558
7 SNMP-1006 506 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 559
set to time out after 30 minutes. Recommended Action No action is required. Allow the firmwareDownload command to continue without disruption. Do not fail over or power down the system during firmware upgrade command has completed successfully and switch firmware has been updated. Recommended - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 560
because firmwareDownload is already in progress." "Sanity check failed because FABRIC OS is disabled on Standby CP." "Sanity check failed because HAMD "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 561
CP failed to boot up." "Standby CP booted up with new firmware." "Standby CP failed to boot up with new firmware." "firmwareDownload has completed successfully on Standby CP." "firmwareDownload has started on 0x76 0x77 0x78 0x79 0x7a 0x7b 0x7c 0x7d Fabric OS Message Reference 509 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 562
has been downloaded successfully. Blade is rebooting with the new firmware." 0xa4 "Blade has rebooted successfully." 0xa5 "New firmware failed to boot up. Please retry firmwareDownload." 0xa6 "firmwareCommit has started on the blade. This may take up to 10 minutes." 0xa7 510 Fabric OS - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 563
. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 564
messages: 0x15 - Failed to download Red Hat package manager (RPM) package. If this error occurs immediately after firmwareDownload is started, the firmware on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware upgrades within two feature releases - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 565
. 0x29 - The pre-install script failed. This error may be caused by an unsupported blade type in the chassis. Remove or power off the unsupported blades before proceeding. Another possible cause may be an invalid chassisConfig option setting. In that case, reset the chassisConfig option before - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 566
firmwareDownload single mode (-s) to upgrade the firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO SULB - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 567
blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message AUDIT, , [SULB-1021], WARNING, FIRMWARE, , , , Firmware is being downloaded to the blade in slot - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 568
command to monitor the progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message AUDIT, , [SULB-1024], WARNING, FIRMWARE, , , , Firmware commit has completed on the blade in slot - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 569
rebooted. Run the firmwareDownloadStatus Action command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message AUDIT, , [SULB-1032], WARNING, FIRMWARE, , , , Relocating an internal - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 570
to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1037 Message AUDIT, , [SULB-1037], ERROR, FIRMWARE, , , , HCL failed. Reboot the switch manually using the reboot command. However - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 571
members have been added to the specified zone object set. The zone object type can be "alias", "zone member", "zone" or "zone configuration". The string "..." appears at the end of >\" deleted. Indicates that the specified zone object has been deleted. Fabric OS Message Reference 519 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 572
Cause Indicates that the specified zone object member or members have been removed from the specified zone object set. The zone object type can be "alias", "zone member", "zone" or "zone configuration". The string "..." appears at the end of the zone object member list if the list was truncated in - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 573
Status: success, Info: Zone configuration \"\" enabled. . Probable Cause Indicates that the specified zone configuration has been enabled. Recommended Verify that the action as defined by your enterprise security policy. Fabric OS Message Reference 521 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 574
Event: , Status: success, Info: \"\" added to \"\". Indicates that the specified new admin domain (AD) object member or members have been added to the specified AD object set. 522 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 575
3015], INFO, FABRIC, , , , Event: , Status: success, Info: AD configurations applied. Probable Cause Indicates that the specified admin domain (AD) has been created. An AD object set type is "AD member". The string "..." appears at the end of the - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 576
: \"\" removed from \"\". Probable Cause Indicates that the specified admin domain ( Severity INFO ZONE-3021 Message AUDIT, , [ZONE-3021], INFO, FABRIC, , , , Event: , - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 577
ZONE-3022 9 Severity INFO ZONE-3022 Message AUDIT, , [ZONE-3022], INFO, FABRIC, , , , Event: , Status: success, Info: Current AD configuration saved to flash. Probable Cause Indicates that the current admin domain (AD) - HP StorageWorks 8/8 | Brocade Error Message Reference Guide v6.1.0 (53-1000600-0 - Page 578
9 ZONE-3025 Severity INFO 526 Fabric OS Message Reference 53-1000600-02
53-1000600-02
12 March 2008
Fabric OS
Message Reference
Supporting Fabric OS v6.1.0